mark maizonnasse, creaform improvement of aircraft mechanical damage inspection with advanced 3d...

Mark Maizonnasse, Creaform

IMPROVEMENT OF AIRCRAFT MECHANICAL DAMAGE INSPECTION WITH ADVANCED3D IMAGING TECHNOLOGIES

3D IMAGING TECHNOLOGIES AT THE SERVICE OF AIRCRAFT INSPECTION

Needs in the industry: Accurate and repeatable

measurements Reliable data Portability/versatility Speed for improved aircraft

availability

How to automatize the inspection workflow?

3D IMAGING AROUND AIRCRAFTS

ACCURACY IMPROVEMENTS WITH 3D SCANNERS

TRUACCURACY TECHNOLOGY EMBEDDED

TRUACCURACY*: SELF-POSITIONING DEVICE

*Unique to Creaform

Human factor controlled

Optimal Stand-off distance / Live feedback

Intelligent acquisition method

Human factor controlled

TRUACCURACY*: SELF-POSITIONING DEVICE

*Unique to Creaform

Accuracy is independent of the user (30µm = 1.2 thou)

Resolution refers to the level of details that the sensor can acquire: Set by inspector Does not affect accuracy

HIGH QUALITY RESULTS

AccuracyResolution

On site calibration

Extra fast calibration +/- 30 secs

Traceability of calibration plate

Similar to calibration block with UT devices

HIGH QUALITY RESULTS

WORKFLOW AND SOFTWARE IMPROVEMENTS

1. Surface acquisition (30 secs/m²)

2. Maximum depth, length, extraction and positioning(1-2 mins)

3. Reporting (seconds)

SIMPLEST POSSIBLE WORKFLOW

WHAT CAN BE MEASURED?

ADVANCED CAPABILITIES

Reconstruction of reference surface based on the curvature around damaged area

Automatic extraction of deepest point and size of feature Measurement possible on any surface/material No limitations/error compared to pit gauge measurements

EDITABLE DETAILED REPORTS

The operator can fill all report properties shown in the report header.

A formatted report will be automatically generated.

PDF file or Excel export available

Custom report templates can be made for each customer

SUMMARY OF MAJOR IMPROVEMENTS

A simple inspection procedure:

4 clicks/dent

High accuracy and repeatable results, human factor controlled:

Up to 30µm

Automated report available in seconds:

Less than 1 min

Quick aircraft hail damage assessment: inspection time reduced by 80%

15mins/m² vs 4-5 hours manually

LIVE DEMONSTRATION

www.creaform3d.com