manualidades
Post on 23-Oct-2015
2 Views
Preview:
TRANSCRIPT
W E D N E S D A Y , M A Y 5 , 2 0 1 0
Tutorial: A Scrappy Strip Rose
I have a fun new flower tutorial for you that’ll use up some of your
scraps. Mine is attached to my bag as you can see, and it looks so
cute that I almost forget my bag is full of diapers and crumbled
goldfish crackers. Now on the tutorial…
First you’ll need:
- 2.5” wide scraps of fabric in whatever colors your heart desires cut
to various lengths. Mine were 3" long to 14" long. For fabric I used
my leftover binding strips. My strips added up in length to about 2
yards, which made me a 5" flower. Add or take away strips or cut
them shorter if you want a bigger or smaller flower. Shorter strips
and more of them will make a more colorful flower.
- A sewing machine and a needle and thread.
-A piece of felt or other strong fabric, a hot glue gun, and a broach
bracket.
Here are my various 2.5" wide strips. Put them in order from the
color you want in the center of the flower, to the outside of the
flower. Now sew them all together end to end, and press seams
open.
Now folding your strip in half as you go, serge OR sew a zig zag
stitch down the raw edges. Do the same on the ends.
With your sewing machine….increase the stitch length as high as it
will go (a 4 on my machine) and increase the thread tension as high
as it will go. Now sew down your strip again right along your
sewn/serged edge. The strip should gather as you go. If it is
gathering TOO much, lower the stitch length (see picture below for
how much mine gathered)
**** I tried this gathering method on a computerized machine first
and it would NOT work. When I switched to the older, manual
machine it worked like a charm. So if this method isn’t working on
your machine…you can either gather it by hand by folding and
scrunching the sewn edge as you sew over it, or use a gathering foot.
Because the strip is so long it won’t work to sew down it with a large
stitch length and pull the bottom thread.
This is what it should look like after its sewn:
Starting with the end you want as the center of the flower, fold the
raw edge down and make the center of the flower by folding the strip
around it. Sew in place either by hand or machine with a few
stitches.
Continue to wrap the sewn/serged edges around the center, securing
the edges to the center with your needle and thread. I put the needle
and thread all the way through the center for the first few layers.
As you continue adding the layers the center will have a tendency to
stick out, but try to keep the sewn edges lined up and flat. Also as
you add more and more layers, you can secure the layers to the
previous layers with a stitch every half inch or so. If you secure the
layers loosely to the previous layer, you’ll get a better result.
This takes a little bit of practice, but I’m also quite possibly the worst
hand sewer ever, so chances are you’ll do it perfectly the first time.
When you get to the end, or the flower is as big as you want it, cut off
the end and tuck the end to the back. Secure it with a stitch and knot
your thread off.
Make sure your flower is just right and poke the center down a little
if its sticking up too much to make the back flat.
Cut a circle out of your felt, just big enough to cover all of the sewn /
serged edges.
With your hot glue gun, cover the backside of your flower with glue,
then press the felt onto the back.
Then hot glue your broach bracket to the felt. (think I used enough
hot glue??? I’m paranoid)
Por eso me ha encantado esta manualidad. Lo he descubierto esta tarde navegando por ineternet en un blog llamado Cluckclucksew, lleno de buenas ideas para hacer tu misma. Es una manualidad preciosa para que la hagan los niños pequeños a partir de dos añitos. Es una manualidad muy fácil y el resultado está garantizado.
Recorta la inicial de tu hijo en un cartón, eso será la base. A continuación, pon a su disposición todo tipo de recortes de tela, de pael e incluso de botones y lazos. Dale el pegamento y que sea él mismo el que decore la inicial. Quedará preciosa seguro!!
Luego la puedes enmarcar para que adorne su dormitorio.
Manualidades para niños. Cómo hacer un caballo de palo
Babyccino Kids es una de las webs internacionales referencia en manualidades para niños. Hoy hemos querido traeros zuna de sus manualidades fáciles para hacer con niños. Seguro que vuestros hijos han soñado alguna vez con que son junetes que
cabalgan por las estepas. O vuestras hijas que cabalgan sobre presiosos unicornios de ensueño. Con esta manualidad sencilla y barata podrán hacerlo ahora de verdad.
Con esta manualidad para niños ellos mismos aprenderán cómo hacer caballos de palo. Además,si estáis pensando en hacer una fiesta de cumpleaños para caballeros o princesas este caballo de palo es perfecto para entretener a los niños y que se lleven un bonito y original detalle a casa.
Materiales:- Un calcetín- Relleno para cojines- Fieltro para hacer las orejas (en dos colores diferentes para que hagan contraste)- Lana- Un palo de madera- Cuero en tiras para hacer las riendas- Aros metálicos (como los de los archivadores)
Cómo hacer nuestro caballo de palo
1. Primero cortamos el palo a la altura apropiada de nuestros hijos y a mano alzada, hacemos una linea rodeando el palo a unos 30 cms de la parte superior. Aparte, rellenamos el calcetín con el relleno para sillones.
2. Ahora nos centramos en hacer las orejas. Para ello recortamos en el color oscuro una forma de lágrima del tamaño de una mano. Hacemos lo mismo con el fieltro de color más claro, pero teniendo en cuenta que tiene que ser un poco más pequeña que la anterior. Una vez tengamos recortados los cuatro trozos de fieltro, superponemos los dos colores y le damos una puntada 'en la parte inferior de las orejillas.
3. Ahora toca personalizar nuestro caballo. Para ello, le cosemos las crines con la lana, en la parte superior del calcetín, en cada lado del morro le cose,mos un boton que hará de ojos, y le cosemos las orejas.
4. Parqa hacer las riendas, cojemos las tiras de cuero y las grapamos a las arandelas metálicas, de tal modo que quede como una rienda aauténtica. Además, podemos pegarle adornos, para que esta manualidad para niños sea de lo más personal.
top related