magnetostrictive sensor monitoring technology (mssmt) for
Post on 12-Feb-2022
7 Views
Preview:
TRANSCRIPT
Magnetostrictive Sensor Monitoring Magnetostrictive Sensor Monitoring Technology (Technology (MsSMTMsSMT) for Low) for Low--Cost, Cost,
LongLong--Term MonitoringTerm Monitoring(Patent Pending)(Patent Pending)
Glenn Light, Ph.D.Glenn Light, Ph.D.Hegeon Kwun, Ph.D.Hegeon Kwun, Ph.D.
Sang Kim, Ph.D.Sang Kim, Ph.D.Robert SpinksRobert Spinks
Southwest Research InstituteSouthwest Research InstituteSan Antonio, TXSan Antonio, TX
ProblemsProblems
Internal and external corrosion can occur at many places along pipe or plateDetection of corrosion using periodic inspection techniques are time consuming and can often occur only during plant shutdownNew technology is needed to detect corrosion in the early stages using a monitoring process without shutting down the plant This process needs to be low cost and provide long-term capability
Example of pipe
Connection Box
Magnetostrictive SensorMonitoring Technology(MsSMT)
(SwRI Proprietary)
MsS Probes
Patented Nickel Foil Probe Gas Pipeline
Shielding CoverCorrosion Defect
Guided wave
Electric Wires
Technical ApproachesTechnical Approaches
Install torsional wave magnetostrictive sensor (MsS) at a corrosion-sensitive region on a pipe or plate and obtain baseline data
Periodically test the pipe or plate with a guided wave using MsS
Compare new data with the baseline data and find any changes using a suitable algorithm.
Laboratory Experiments Using MsSMT for Notch and Holein 1.9-Inch-OD, 0.15-Inch-Thick Steel Pipe
(SwRI Proprietary)
ProbeNickelStrip
5/8-Inch-Long,0.075-Inch-Deep
Notch (4.1 %)
3/8-Inch-Diameter,0.075-Inch Deep Hole
(3.1 %)
0 ft 1.08 ft 3.64 ft 5.42 ft 6 ft
MsS Probe Notch Flat Hole E2E1
Torsional Mode Signal in Steel Pipe with Notch and Hole (SwRI Proprietary)
(E1)(E2)
Initial Pulse
HoleNotch
Example of MsSR-1000TM and MsS Probe Wrapped Around a 24-Inch-OD Pipe
to Generate a Torsional Wave (SwRI Proprietary)
MsS Probe
MsSR-1000TM
Size and Cross-Section Area of Hole Made for Monitoring Corrosion Defect Growing in a Steel Pipe
(SwRI Proprietary)
Diameter(Inch)
Depth (Inch)
Cross Section Area (%)
0.073 0.05 0.33
0.073 0.073 0.53
0.104 0.073 0.69
0.203 0.073 0.92
3/8-inch-diameter,
0.075-inch deep Hole
Torsional Mode Signal in Steel Pipe with Notch and Hole (SwRI Proprietary)
(E1) (E2)
Initial Pulse
HoleNotch
Inspection Processes for Steel Pipe with a Defect Growing Next to the 3/8-Inch-Diameter, 0.075-Inch-Deep Hole
(SwRI Proprietary)
Before Placing a Hole
After Placing a Hole
0.33%
0.53%
0.69%
0.92%
Results After Applying Waveform Differential Algorithm in Time Domain to Monitor Hole Growth
(SwRI Proprietary)
Before Placing a Hole
After Placing a Hole
0.33 %
0.53 %
0.69 %
0.92 %
E2
Future ResearchFuture Research
Investigate magnetic field property variation of ferromagnetic strip used for the torsional wave monitoring processConduct laboratory and field demonstrations of the MsSMT with MsS and torsional wave coils on pipe and plate in the following industries:
PetrochemicalPower plantBuried pipeline
top related