lotus domino on aix6.1

Lotus Domino 8.5 on AIX6.1

1)Download the 64 bit lotus domino 8.5 form the internet2)untar lotus domino setup

3)create user using smit Eg:Username :notes #id:110Group :notes #id:110Or# mkgroup notes;mkdir –p /home/notes;useradd –d /home/notes –g notes notes# passwd notes

4)Configure iocp port Procedure:

# lsdev –Cc iocp

iocp0 Available I/O Completion Ports

notes:if it show as defined you have to follow following steps one by one,

Before the starting the notes user installation process you need to check iocp available or you have to follow process.

To install the IOCP module and ensure that it is correctly installed on the crawler server:

You must 1. Install the IOCP module (bos.iocp.rte) from the AIX product CD on the crawler

server.

After you install the IOCP module, and before you create a Notes, QuickPlace, or Domino Document Manager crawler, apply a software fix for the module. See the information at the following link for instructions:

http://www.ibm.com/support/docview.wss?uid=swg21086556

2. Enter the following command to ensure that the IOCP module is installed on the crawler server:

$ lslpp -l bos.iocp.rte

The output from the lslpp command should be similar to the following example:

Fileset Level State Description------------------------------------------------------------------------Path: /usr/lib/objrepos bos.iocp.rte 5.2.0.10 COMMITTED I/O Completion Ports API

Path: /etc/objrepos bos.iocp.rte 5.2.0.10 COMMITTED I/O Completion Ports API

3. Enter the following command to ensure that the status of the IOCP port is Available:

$ lsdev -Cc iocp

The output from the lsdev command should match the following example:

iocp0 Available I/O Completion Ports

4. If the IOCP port status is Defined, change the status to Available:a. Log in to the crawler server as root and issue the following command:

# smit iocp

b. Select Change / Show Characteristics of I/O Completion Ports and change STATE to be configured at system restart from Defined to Available.

c. Reboot the crawler server.d. Enter the lsdev command again and confirm that the status of the IOCP

port was changed to Available.

4)install from root# export DISPLAY=ipaddr:0.0Go to extracted path# ./install

Start with graphical modeEnter yes

List screen will appear to do installation:

Configuration:

1)Login as notes user

2) Setting up environment variable .profile file

LOTUS=/opt/ibm/lotus

LOTUS_HOME=/opt/ibm/lotus/notes

NOTES_DATA=/local/notesdata

NOTES_DATA_DIR=/local/notesdata

Notes_ExecDirectory=/opt/ibm/lotus/notes/85000/ibmpow

LOTUS_DATA=/local/notesdata

LOTUS_EXEC=/opt/ibm/lotus/notes/80000/ibmpow

export LOTUS LOTUS_HOME NOTES_DATA NOTES_DATA_DIR Notes_ExecDirectory LOTUS_DATA

export LOTUS_EXEC

LIBPATH=$LIBPATH:$Notes_ExecDirectory

PATH=$PATH:$LOTUS:$LOTUS_HOME:$LOTUS_DATA:$LOTUS_EXEC:$NOTES_DATA:$NOTES_DATA_DIR:$Notes_ExecDirectory:$Notes_ExecDirecory/res/C:/opt/ibm/lotus/bin

INI_FILE=/local/notesdata/notes.ini

SRV_NAME=intaix4

NLS_LANG=AMERICAN_AMERICA.US7ASCII

export LIBPATH PATH INI_FILE SRV_NAME NLS_LANG

3)export DISPLAY=ipadres:0.0

3) go to /local/notesdata

Execute the following command

#/opt/ibm/lotus/bin/server start it will start setup screen first time after installation part done in root user.

Start lotus domino server procedure:

# /opt/ibm/lotus/bin/server start –Enter

http://hostname/webadmin.nsfusername:administratorpasswd: *********

Removing/Uninstalling domino from AIX:

1) remove the folder from /opt/ibm/lotus2) remove the folder from /local3) uncomment the env variable