limit switches - rs componentste 17 limit switches double insulated, types xck-p and xck-t general...
Post on 27-Mar-2021
4 Views
Preview:
TRANSCRIPT
16 Te
Limit switchesDouble insulated, types XCK-P and XCK-T
Presentation
With head for linear movement (plunger) operators
Page 18
With head for rotary movement (lever) or multi-directional operators
Page 20
With head for linear movement (plunger) operators
Page 22
With head for rotary movement (lever) or multi-directional operators
Page 24
XCK-Pwith 1 cable entry,conforming toCENELECEN 50047
XCK-Twith 2 cableentries,compatible withCENELECEN 50047(Tripping/resetting pointsand fixing centres conformto CENELEC EN 50047)
17Te
Limit switchesDouble insulated, types XCK-P and XCK-T
General characteristics
Environment
Conforming Products IEC 947-5-1, IEC 337-1, EN 60 947-5-1, NF C 63-146, VDE 0660-200, UL 508, CSA C22-2 n° 14to standards
Machine assemblies IEC 204-1, EN 60 204-1, NF C 79-130
Approvals CSA A300, UL A300 Listed, NEMKO FI 10 (4) A-400 V
Protective treatment Standard version : “TC” and “TH”
Ambient air temperature Operation : - 25…+ 70 °C. Storage : - 40…+ 70 °C
Vibration resistance 25 gn (10…500 Hz) conforming to IEC 68-2-6
Shock resistance 50 gn (11 ms) conforming to IEC 68-2-27
Electric shock protection Class II conforming to IEC 536 and NF C 20-030
Degree of protection IP 65 conforming to IEC 529 ; IP 653 conforming to NF C 20-010
Repeat accuracy 0.1 mm on the tripping points
Cable entry Depending on model : tapped entry for n° 11 or 13 cable gland(s), or tapped M16 or tapped 1/2" NPT
Contact block characteristics
Rated operational characteristics ccccc AC-15 ; A300 (Ue = 240 V, Ie = 3 A)aaaaa DC-13 ; Q300 (Ue = 250 V, Ie = 0.27 A) conforming to IEC 947-5-1 Appendix A, EN 60 947-5-1
Rated insulation voltage Ui = 500 V degree of pollution 3 conforming to IEC 947-1 and VDE 0110, group C conforming to NF C 20-040Ui = 300 V conforming to UL 508, CSA C22-2 n° 14
Rated withstand impulse voltage U imp = 6 kV conforming to IEC 947-1, IEC 664
Positive operation (Dpg. on model) N/C contacts with positive opening operation conforming to IEC 947-5-1 Section 3, EN 60 947-5-1
Resistance across terminals ≤ 25 mΩ conforming to NF C 93-050 method A or IEC 255-7 category 3
Short-circuit protection 10 A cartridge fuse type gG (gl)
Cabling Screw and captive cable clamp terminals.XES-Piiiii151 and XES-P2141 : Clamping capacity, min. : 1 x 0.34 mm2, max. : 2 x 1.5 mm2
XEN-P21iiiii1 and XEN-P31iiiii1 : Clamping capacity, min. : 1 x 0.5 mm2, max. : 2 x 2.5 mm2
Minimum actuation speed XES-P iiiii151 and XES-P2141 : 0.001 m/minute, XEN-P21iiiii1 and XEN-P31iiiii1 : 0.001 m/second
Electrical durability Conforming to IEC 947-5-1 Appendix C.Utilisation categories AC-15 and DC-13.Maximum operating rate : 3600 operating cycles per hour.Load factor : 0.5
XES-Piiiii151, XES-P2141 XEN-P21iiiii1, XEN-P31iiiii1
a.c. supply c 50/60 Hzp inductive circuit
d.c. supply a Power broken in W for 5 million operating cycles Power broken in W for 5 million operating cycles
Voltage V 24 48 120 Voltage V 24 48 120
p W 10 7 4 p W 13 9 7For XES-Pi151 on c or a, N/C and N/O contactssimultaneously loaded to the values shown with reversepolarity.
Current in A Current in A
0,1
0,5
1
5
0,5 1 5 10
110 V
48 V230/400 V
2 3 4
Ithe
24 V
0,5 1 2 3 4 5 100,1
0,2
0,5
1
5
2
43
Ithe
230 V 12/24/48 V
110 V
Mill
ions
of
oper
atin
g cy
cles
Mill
ions
of
oper
atin
g cy
cles
18 Te
1314 22
21
1211
2221
1314 24
23
2221
1413
1314 22
21
Limit switchesDouble insulated, conforming to CENELEC EN 50047, type XCK-PComplete switches with 1 cable entry, tapped M16 x 1.5
References, characteristics
Type of operating head Plunger
Type of Metal end plunger Steel end plunger Thermoplastic Thermoplastic roller lever plunger, 1 direction of actuationoperator with elastomer roller plunger horizontal vertical horizontal or
boot vertical
References ( N/C contact with positive opening operation)
2-pole 1 N/C + 1 N/O XCK-P110H29 XCK-P111H29 XCK-P102H29 XCK-P121H29 XCK-P127H29 XCK-P128H29snap action(XES-P2151)
2-pole 1 N/C + 1 N/O XCK-P510H29 XCK-P511H29 XCK-P502H29 XCK-P521H29 XCK-P527H29 XCK-P528H29break before makeslow break (XEN-P2151)
2-pole 1 N/O + 1 N/C XCK-P610H29 XCK-P611H29 XCK-P602H29 XCK-P621H29 XCK-P627H29 XCK-P628H29make before breakslow break (XEN-P2161)
2-pole 1 N/C + 1 N/C XCK-P710H29 XCK-P711H29 XCK-P702H29 XCK-P721H29 XCK-P727H29 XCK-P728H29simultaneousslow break (XEN-P2141)
2-pole 1 N/O + 1 N/O XCK-P810H29 XCK-P811H29 XCK-P802H29 XCK-P821H29 XCK-P827H29 XCK-P828H29simultaneousslow break (XEN-P2131)
Weight (kg) 0.055 0.055 0.055 0.060 0.060 0.060
Complementary characteristics not shown under General characteristics (page 17)
Switch actuation On end By 30° cam
Maximum actuation speed 0.5 m/s 0.3 m/s 1 m/s
Mechanical durability 15 million 10 million 15 million operating cyclesoperating cycles operating cycles
Minimum force for tripping 15 N 12 N 6 N
for positive opening 45 N 36 N 18 N
Cable entry 1 entry tapped M16 x 1.5 for ISO cable gland. Clamping capacity : 4 to 8 mm.
Other versions Switches with gold flashed contacts.Please consult your local Customer support centre.
19Te
Limit switchesDouble insulated, conforming to CENELEC EN 50047, type XCK-PComplete switches with 1 cable entry, tapped M16 x 1.5
Setting-up, dimensions
Setting-upType of actuationXCK-Piiiii10H29 XCK-Piiiii11H29 XCK-Piiiii02H29 XCK-Piiiii21H29 XCK-Piiiii27H29 XCK-Piiiii28H29
Function diagramsXCK-P110H29 XCK-P111H29 XCK-P102H29 XCK-P121H29 XCK-P127H29 XCK-P128H29
XCK-P510H29 XCK-P511H29 XCK-P502H29 XCK-P521H29 XCK-P527H29 XCK-P528H29
XCK-P610H29 XCK-P611H29 XCK-P602H29 XCK-P621H29 XCK-P627H29 XCK-P628H29
XCK-P710H29 XCK-P711H29 XCK-P702H29 XCK-P721H29 XCK-P727H29 XCK-P728H29
XCK-P810H29 XCK-P811H29 XCK-P802H29 XCK-P821H29 XCK-P827H29 XCK-P828H29
Contact operation (A), (B) = cam displacementg contact closed (P) = positive opening pointh contact openDimensionsXCK-Piiiii10H29 XCK-Piiiii11H29 XCK-Piiiii02H29
XCK-Piiiii21H29 XCK-Piiiii27H29 XCK-Piiiii28H29
(1) 1 cable entry, tapped M16 x 1.5 for ISO cable gland Ø : 2 elongated holes Ø 4.3 x 8.3 on 22 centres, 2 holes Ø 4.3 on 20 centres
1,8
0 5mm0,9
4,5(P)21-2213-1421-2213-14
1,8
0 5mm0,9
4,5(P)21-2213-1421-2213-14
3,1(A)21-2213-1421-2213-14
0 mm1,5
7,8(P) 6,5(A)
0 mm3
15,7(P)21-2213-1421-2213-14
6,5(B)
0 mm3
15,7(P)21-2213-1421-2213-14
9,8(A)
0 mm4,9
22,5(P)21-2213-1421-2213-14
9,8(A)
0 mm16,1
17,2(P)21-2213-14
6,5(B)
0 mm10,5
11,3(P)21-2213-14
6,5(A)
0 mm10,5
11,3(P)21-2213-14
3,1(A)
0 mm5,2
5,6(P)21-2213-14
1,8
0 5mm3
3,2(P)21-2213-14
1,8
0 5mm3
3,2(P)21-2213-14
8,1(B)
0 mm5,321-2213-14
5,2
0 mm3,1
7,6(P)21-2213-14
3
0 5mm1,8
4,4(P)21-2213-14
3
0 5mm1,8
4,4(P)21-2213-14
10,9(A)
0 mm6,6
16(P)21-2213-14
10,9(B)
0 mm6,6
16(P)21-2213-14
6,6(B) 11,6(P)
0 mm11-1221-22
5,3(A)
0 mm11-1221-22
6,6(A) 11,6(P)
0 mm11-1221-22
5,6(P)
0 mm
3,111-1221-22
1,8
0 5mm
3,2(P)11-1221-22
1,8
0 5mm
3,2(P)11-1221-22
5,3(A)
0 mm13-1423-24
6,6(B)
0 mm13-1423-24
1,8
0 5mm13-1423-24
1,8
0 5mm13-1423-24
3,1(A)
0 mm13-1423-24
6,6(A)
0 mm13-1423-24
Ø
30
20/22= =
30,5
Ø11
4
30
(1)
8525
3,5
12,5
30
(1)
74,525
12,5
30
20/22= =
20
Ø8
Ø4
30
(1)
74,525
12,5
Ø
30
20/22= =
20
Ø8
4
30
(1)
93,5
25
5,5
12,5
Ø
30
20/22= =
39
Ø14
204
30
(1)
95,5
25
5,5
12,5
Ø14
Ø
30
20/22= =
41
12,5
22
4
30
(1)
104,
5
25
6
12,5
30
20/22= =
50Ø22
31
2,52,5
312
Ø4
20 Te
1314 22
21
1211
2221
1314 24
23
2221
1413
1314 22
21
Limit switchesDouble insulated, conforming to CENELEC EN 50047, type XCK-PComplete switches with 1 cable entry, tapped M16 x 1.5
References, characteristics
Type of operating head Rotary Multi-directional
Type of Thermoplastic Variable length Square rod Round rod “Cat’s whisker”operator roller lever (1) thermoplastic u 3 mm Ø 3 mm
roller lever (2) steel (2) glass fibre (2)(1) Adjustable throughout 360° in 5° steps, or in 90° steps by reversing the notched washer.(2) Adjustable throughout 360° in 5° steps.
References ( N/C contact with positive opening operation)
2-pole 1 N/C + 1 N/O XCK-P118H29 XCK-P145H29 XCK-P154H29 XCK-P155H29 XCK-P106H29snap action(XES-P2151)
2-pole 1 N/C + 1 N/O XCK-P518H29 XCK-P545H29 XCK-P554H29 XCK-P555H29 XCK-P506H29break before makeslow break (XEN-P2151)
2-pole 1 N/O + 1 N/C XCK-P601H29 XCK-P601H29 XCK-P601H29 XCK-P601H29 XCK-P606H29make before break +ZCK-Y18 +ZCK-Y45 +ZCK-Y54 +ZCK-Y55slow break (XEN-P2161)
2-pole 1 N/C + 1 N/C XCK-P701H29 XCK-P701H29 XCK-P701H29 XCK-P701H29 XCK-P706H29simultaneous +ZCK-Y18 +ZCK-Y45 +ZCK-Y54 +ZCK-Y55slow break (XEN-P2141)
2-pole 1 N/O + 1 N/O XCK-P801H29 XCK-P801H29 XCK-P801H29 XCK-P801H29 XCK-P806H29simultaneous +ZCK-Y18 +ZCK-Y45 +ZCK-Y54 +ZCK-Y55slow break (XEN-P2131)
Weight (kg) 0.070 0.080 0.075 0.060 0.065
Complementary characteristics not shown under General characteristics (page 17)
Switch actuation By 30° cam By any moving part
Maximum actuation speed 1.5 m/s 1.5 m/s 1 m/s 1 m/s 1 m/s in any direction
Mechanical durability 10 million operating cycles 5 millionoperating cycles
Minimum torque for tripping 0.1 N.m 0.13 N.m
for positive opening 0.25 N.m – –
Cable entry 1 entry tapped M16 x 1.5 for ISO cable gland. Clamping capacity : 4 to 8 mm.
Other versions Switches with gold flashed contacts.Please consult your local Customer support centre.
21Te
Limit switchesDouble insulated, conforming to CENELEC EN 50047, type XCK-PComplete switches with 1 cable entry, tapped M16 x 1.5
Setting-up, dimensions
Setting-upType of actuationXCK-Piiiii18H29, ZCK-Y18 XCK-Piiiii45H29, ZCK-Y45 XCK-Piiiii54H29, ZCK-Y54 XCK-Piiiii55H29, ZCK-Y55 XCK-Piiiii06H29
Function diagramsXCK-P118H29 XCK-P145H29 XCK-P154H29 XCK-P155H29 XCK-P106H29
XCK-P518H29 XCK-P545H29 XCK-P554H29 XCK-P555H29 XCK-P506H29
XCK-P601H29 + ZCK-Y18 XCK-P601H29 + ZCK-Y45 XCK-P601H29 + ZCK-Y54 XCK-P601H29 + ZCK-Y55 XCK-P606H29
XCK-P701H29 + ZCK-Y18 XCK-P701H29 + ZCK-Y45 XCK-P701H29 + ZCK-Y54 XCK-P701H29 + ZCK-Y55 XCK-P706H29
XCK-P801H29 + ZCK-Y18 XCK-P801H29 + ZCK-Y45 XCK-P801H29 + ZCK-Y54 XCK-P801H29 + ZCK-Y55 XCK-P806H29
Contact operation (P) = positive opening pointg contact closedh contact openDimensionsXCK-Pi18H29, XCK-Pi01 + ZCK-Y18 XCK-Pi45H29, XCK-Pi01 + ZCK-Y45 XCK-Pi54H29, XCK-Pi55H29, XCK-Pi01 + ZCK-Y5i
XCK-Piiiii06H29
(1) cable entry, tapped M16 x 1.5 fot ISO cable gland.(2) 115 max.(3) 133 max.Ø : 2 elongated holes Ø 4.3 x 8.3 on 22 centres, 2 holes Ø 4.3 on 20 centres.
25°
0 70°12°
21-2213-1421-2213-14
25°
0 70°12°
60°(P)21-2213-1421-2213-14
20°
015°
21-2213-1421-2213-14
25°
0 70°35°
46°(P)21-2213-14
25°
0 70°35°
21-2213-14
20°
0 45°
21-2213-14
43°
0 70°25°
21-2213-14
45°
0 20°
21-2213-14
43°
0 70°25°
66°(P)21-2213-14
43°
0 70°25°
21-2213-14
43°
0 70°25°
21-2213-14
25°
0 70°
11-1221-22
25°
0 70°
11-1221-22
25°
0 70°
11-1221-22
20°
0
11-1221-22
25°
0 70°
13-1423-24
25°
0 70°
13-1423-24
25°
0 70°
13-1423-24
25°
0 70°
13-1423-24
20°
0
13-1423-24
44,5
108
25
5,5 24
40
(1)
30
20/22 ==
Ø
53,5
Ø19
35,5
4
43,5
111,
5...1
57,5
25
5,5 30
38
(1)
58...
103
30
20/22 ==
Ø
Ø19
40...
85
4
25°
0 70°12°
21-2213-1421-2213-14
25°
0 70°12°
21-2213-1421-2213-14
25°
0 70°35°
21-2213-14
25°
0 70°35°
21-2213-14
46°(P)25°
0 70°
11-1221-22
30
196,
5
25
12,5
(1)
30
20/22 ==
Ø
142
Ø1,2
4
36,5
83,5
...18
7,5
25
34
(1)
30
20/22 ==
Ø
(3)(2
)20
4
22 Te
1314 22
21
1211
2221
1314 24
23
2221
1413
1314 22
21
Limit switchesDouble insulated, CENELEC EN 50047 compatible (1), type XCK-TComplete switches with 2 cable entries, tapped M16 x 1.5
References, characteristics
Type of operating head Plunger
Type of Metal end plunger Steel end plunger Thermoplastic Thermoplastic rolleroperator with elastomer boot roller plunger lever plunger. Horizontal
actuation in 1 direction
References ( N/C contact with positive opening operation)
2-pole 1 N/C + 1 N/O XCK-T110H29 XCK-T111H29 XCK-T102H29 XCK-T121H29snap action(XES-P3151)
2-pole 1 N/C + 1 N/O XCK-T510H29 XCK-T511H29 XCK-T502H29 XCK-T521H29break before makeslow break (XEN-P3151)
2-pole 1 N/O + 1 N/C XCK-T610H29 XCK-T611H29 XCK-T602H29 XCK-T621H29make before breakslow break (XEN-P3161)
2-pole 1 N/C + 1 N/C XCK-T710H29 XCK-T711H29 XCK-T702H29 XCK-T721H29simultaneousslow break (XEN-P3141)
2-pole 1 N/O + 1 N/O XCK-T810H29 XCK-T811H29 XCK-T802H29 XCK-T821H29simultaneousslow break (XEN-P3131)
Weight (kg) 0.065 0.065 0.065 0.070
Complementary characteristics not shown under General characteristics (page 17)
Switch actuation On end By 30° cam
Maximum actuation speed 0.5 m/s 0.3 m/s 1 m/s
Mechanical durability 15 million operating cycles 10 million 15 millionoperating cycles operating cycles
Minimum force for tripping 15 N 12 N 6 N
for positive opening 45 N 36 N 18 N
Cable entry 2 entries tapped M16 x 1.5 for ISO cable glands. Clamping capacity : 4 to 8 mm.(Switch supplied with 1 entry fitted with blanking plug).
(1) Tripping/resetting points and fixing centres conform to CENELEC EN 50047.
Other versions Switches with gold flashed contacts.Please consult your local Customer support centre.
23Te
1,8
0 5mm
3,2(P)11-1221-22
1,8
0 5mm
3,2(P)11-1221-22
5,6(P)
0 mm
3,111-1221-22
6,6(A) 11,6(P)
0 mm11-1221-22
1,8
0 5mm0,9
4,5(P)21-2213-1421-2213-14
1,8
0 5mm0,9
4,5(P)21-2213-1421-2213-14
6,5(A)
0 mm3
15,7(P)21-2213-1421-2213-14
1,8
0 5mm3
3,2(P)21-2213-14
1,8
0 5mm3
3,2(P)21-2213-14
6,5(A)
0 mm10,5
11,3(P)21-2213-14
3
0 5mm1,8
4,4(P)21-2213-14
10,9(A)
0 mm6,6
16(P)21-2213-14
3,1(A)21-2213-1421-2213-14
0 mm1,5
7,8(P)
3,1(A)
0 mm5,2
5,6(P)21-2213-14
3
0 5mm1,8
4,4(P)21-2213-14
5,2
0 mm3,1
7,6(P)21-2213-14
1,8
0 5mm13-1423-24
1,8
0 5mm13-1423-24
3,1(A)
0 mm13-1423-24
6,6(A)
0 mm13-1423-24
30
8025
12,5
5,5
Ø
59,5
40/42
20/22
9,5
==
39
Ø14
20
(1)
4
30
61
25
12,5
59,5
40/42
20/22
9,5
==
(1) Ø
20
Ø8
4
30
61
25
12,5
9,5
59,5
40/42
20/22 ==
(1) Ø
20
Ø8
4
3,5
30
71,525
12,5
59,5
40/42
20/22
9,5
==
30,5
Ø11
(1) Ø
4
Limit switchesDouble insulated, CENELEC EN 50047 compatible, type XCK-TComplete switches with 2 cable entries, tapped M16 x 1.5
Setting-up, dimensions
Setting-upType of actuationXCK-Tiiiii10H29 XCK-Tiiiii11H29 XCK-Tiiiii02H29 XCK-Tiiiii21H29
Function diagramsXCK-T110H29 XCK-T111H29 XCK-T102H29 XCK-T121H29
XCK-T510H29 XCK-T511H29 XCK-T502H29 XCK-T521H29
XCK-T610H29 XCK-T611H29 XCK-T602H29 XCK-T621H29
XCK-T710H29 XCK-T711H29 XCK-T702H29 XCK-T721H29
XCK-T810H29 XCK-T811H29 XCK-T802H29 XCK-T821H29
Contact operation (A) = cam displacementg contact closed (P) = positive opening pointh contact openDimensionsXCK-Tiiiii10H29 XCK-Tiiiii11H29
XCK-Tiiiii02H29 XCK-Tiiiii21H29
(1) 2 cable entries, tapped M16 x 1.5 for ISO cable glands Ø : 4 elongated holes Ø 4.3 x 8.3 on 22/42 centres, 4 holes Ø 4.3 on 20/40 ctrs.
24 Te
1314 22
21
1211
2221
1314 24
23
2221
1413
1314 22
21
Limit switchesDouble insulated, CENELEC EN 50047 compatible (1), type XCK-TComplete switches with 2 cable entries, tapped M16 x 1.5
References, characteristics
Type of operating head Rotary Multi-directional
Type of Thermoplastic Variable length Square rod Round rod “Cat’s whisker”operator roller lever (2) thermoplastic u 3 mm Ø 3 mm
roller lever (3) steel (3) glass fibre (3)(2) Adjustable throughout 360° in 5° steps, or in 90° steps by reversing the notched washer.(3) Adjustable throughout 360° in 5° steps.
References ( N/C contact with positive opening operation)
2-pole 1 N/C + 1 N/O XCK-T118H29 XCK-T145H29 XCK-T154H29 XCK-T155H29 XCK-T106H29snap action(XES-P3151)
2-pole 1 N/C + 1 N/O XCK-T518H29 XCK-T545H29 XCK-T554H29 XCK-T555H29 XCK-T506H29break before makeslow break (XEN-P3151)
2-pole 1 N/O + 1 N/C XCK-T601H29 XCK-T601H29 XCK-T601H29 XCK-T601H29 XCK-T606H29make before break +ZCK-Y18 +ZCK-Y45 +ZCK-Y54 +ZCK-Y55slow break (XEN-P3161)
2-pole 1 N/C + 1 N/C XCK-T701H29 XCK-T701H29 XCK-T701H29 XCK-T701H29 XCK-T706H29simultaneous +ZCK-Y18 +ZCK-Y45 +ZCK-Y54 +ZCK-Y55slow break (XEN-P3141)
2-pole 1 N/O + 1 N/O XCK-T801H29 XCK-T801H29 XCK-T801H29 XCK-T801H29 XCK-T806H29simultaneous +ZCK-Y18 +ZCK-Y45 +ZCK-Y54 +ZCK-Y55slow break (XEN-P3131)
Weight (kg) 0.080 0.090 0.085 0.070 0.075
Complementary characteristics not shown under General characteristics (page 17)
Switch actuation By 30° cam By any moving part
Maximum actuation speed 1.5 m/s 1.5 m/s 1 m/s 1 m/s 1 m/s in any direction
Mechanical durability 10 million operating cycles 5 millionoperating cycles
Minimum torque for tripping 0.1 N.m 0.13 N.m
for positive opening 0.25 N.m – –
Cable entry 2 entries tapped M16 x 1.5 for ISO cable glands. Clamping capacity 4 to 8 mm.(Switch supplied with 1 entry fitted with blanking plug).
(1) Tripping/resetting points and fixing centres conform to CENELEC EN 50047.
Other versions Switches with gold flashed contacts.Please consult your local Customer support centre.
25Te
Limit switchesDouble insulated, CENELEC EN 50047 compatible, type XCK-TComplete switches with 2 cable entries, tapped M16 x 1.5
Setting-up, dimensions
Setting-upType of actuationXCK-Ti18H29, ZCK-Y18 XCK-Ti45H29, ZCK-Y45 XCK-Ti54H29, ZCK-Y54 XCK-Ti55H29, ZCK-Y55 XCK-Ti06H29
Function diagramsXCK-T118H29 XCK-T145H29 XCK-T154H29 XCK-T155H29 XCK-T106H29
XCK-T518H29 XCK-T545H29 XCK-T554H29 XCK-T555H29 XCK-T506H29
XCK-T601H29+ZCK-Y18 XCK-T601H29+ZCK-Y45 XCK-T601H29+ZCK-Y54 XCK-T601H29+ZCK-Y55 XCK-T606H29
XCK-T701H29+ZCK-Y18 XCK-T701H29+ZCK-Y45 XCK-T701H29+ZCK-Y54 XCK-T701H29+ZCK-Y55 XCK-T706H29
XCK-T801H29+ZCK-Y18 XCK-T801H29+ZCK-Y45 XCK-T801H29+ZCK-Y54 XCK-T801H29+ZCK-Y55 XCK-T806H29
Contact operation (P) = positive opening pointg contact closedh contact openDimensionsXCK-Tiiiii18H29, XCK-Tiiiii01 + ZCK-Y18 XCK-Tiiiii45H29, XCK-Tiiiii01 + ZCK-Y45
XCK-Tiiiii54H29, XCK-Tiiiii55H29, XCK-Tiiiii06H29XCK-Tiiiii01 + ZCK-Y5iiiii
(1) 2 cable entries, tapped M16 x 1.5 for ISO cable glands (3) 133 max.(2) 115 max. Ø : 4 elongated holes Ø 4.3 x 8.3 on 22/42 centres, 4 holes Ø 4.3 on 20/40 ctrs.
20°
0
11-1221-22
25°
0 70°12°
21-2213-1421-2213-14
20°
015°
21-2213-1421-2213-14
25°
0 70°12°
60°(P)21-2213-1421-2213-14
25°
0 70°35°
46°(P)21-2213-14
25°
0 70°35°
21-2213-14
20°
0 45°
21-2213-14
43°
0 70°25°
66°(P)21-2213-14
45°
0 20°
21-2213-14
25°
0 70°
13-1423-24
25°
0 70°
13-1423-24
25°
0 70°
13-1423-24
25°
0 70°
13-1423-24
20°
0
13-1423-24
44,5
94,5
5,5 24
40
25
53,535
,5
Ø19
40/42
59,5
20/22
9,5
==
Ø
(1)
4
43,5
99...
144
5,5 30
38
25
58...
103
40...
85Ø19
40/42
59,5
20/22
9,5
==
Ø
(1)
4
40/42
59,5
20/22
9,5
==
(3)(2
)
30
Ø
(1)
4
20
25
34
36,5
70...
174
25°
0 70°35°
21-2213-14
25°
0 70°12°
21-2213-1421-2213-14
25°
0 70°12°
21-2213-1421-2213-14
25°
0 70°35°
21-2213-14
0 70°25°
21-2213-14
43°
0 70°25°
21-2213-14
43°
0 70°25°
21-2213-14
43°
0 70°
11-1221-22
25°
0 70°
11-1221-22
25°
0 70°
11-1221-22
25°
30
183
12,5
25
142
Ø1,2
Ø
(1)
4
40/42
59,5
20/22
9,5
==
46°(P)25°
0 70°
11-1221-22
top related