lg cf-21d30x chassis mc64b sm
Post on 23-Nov-2015
210 Views
Preview:
DESCRIPTION
TRANSCRIPT
-
InstallationPowerThis set operates on an AC mains supply, the voltage is as indicated on the label on the back cover.Never apply DC power to the set. In the event of thunderstorms or powercuts, please pull out theaerial and mains plugs.
WarningTo prevent fire or shock hazard, do not expose the set to rain or moisture.
ServiceNever remove the back cover of the set as this can expose you to very high voltage and otherhazards. If the set does not operate properly, unplug it and call your dealer.
Aerial
Connect the aerial cable to the socket marked +75 on the back cover. For the best reception anoutdoor aerial should be used.
LocationPosition your set so that no bright light or sunlight falls directly onto the screen. Care should be takennot to expose the set to any unnecessary vibration, moisture, dust or heat. Also ensure that the set isplaced in a position to allow a free flow of air. Do not cover the ventilation openings on the back cover.
Battery installation The remote control handset is powered by two AA type batteries. Gently pull down the cover of theremote control handset until the battery compartment is exposed. Install two batteries as indicated bythe polarity symbols(]and )^ marked inside the compartment.
Note : To avoid damage from possible battery leakage, remove the batteries if you do not plan to usethe remote control handset for an extended period of time.
-
Location and function of controlsAll the functions can be controlled with the remote controlhandset. Some functions can also be adjusted with thebuttons on the front panel of the set.
Before you use the remote control handset, please installthe batteries.
1. POWERswitches the set on from standby or off to standby.
2. MUTEswitches the sound on or off.
3. NUMBER BUTTONSswitch the set on from standby or directly select anumber.
4. QUICK VIEWreturns to the previously viewed programme.
5. TELETEXT BUTTONS (option)These buttons are used for teletext.For further details, see the 'Teletext' section.
6. / (Programme Up/Down)switches the set on from standby.selects a programme or a menu item./ (Volume Down/Up)adjusts the volume.adjusts menu settings. OKaccepts your selection or displays the current mode.
7. SSM (Sound Status Memory)recalls your preferred sound setting.
8. DUALIn AV mode, selects the sound output.
9. EYE (option)switches on or off algorithm eye picture mode.
10. VCR BUTTONS (option)control the video cassette recorder of our brand.
POWER MUTE
1 2 3 PSM
4 5 6 PSEUDO
7 8 9 TV/AV
Q.VIEW 0 TEXT
SLEEP -/--
MENU
EYE DUAL SYSTEM
SIZE HOLD
START
QSR
LENGTH SP/LP ON/OFF
CH+ REW PLAY FF
CH- P/STILL STOP REC
UPDATE INDEX
PR
PR
OK
VOL VOL
M
MIX TIME REVEAL MODE
SSM
TXT
VCR
1
11
12
13
14
15
16
17
3
4
5
6
9
2
8
5
7
10
5
Remote control handset
(With TELETEXT)
-
Location and function of controls11. PSM (Picture Status Memory)
recalls your preferred picture setting.
12. PSEUDOTo get a pseudo stereo sound effect.
13. TV/AVselects TV or AV mode.
14. MENUselects a menu.
15. SLEEPsets the sleep timer.
16. UNITselects single or double digit.
17. SYSTEMdisplays the system selection mode.
18. MAIN POWER (vv)switches the set on or off.
19. STANDBY INDICATORilluminates red when the set is in standby mode.flashes when a button on the remote control handsetis pressed.
20 REMOTE CONTROL SENSOR
21. ALGORITHM EYE (option)Window for analyze picture according to the conditionof surroundings.
22. AUDIO/VIDEO IN SOCKETS (option)Connect the audio/video out sockets of externalequipment to these sockets.
POWER MUTE
1
4 6
7 9
2 3
5
8
0 TV/AV
PR
PR
OK
VOL VOL
MENU
SLEEP PSEUDO
DUAL
PSM
SSM
Q.VIEW
SYSTEM
EYE
Remote control handset
Front panel
POWERMENU OK
VIDEOAV2
(L/MONO)-AUDIO-(R)
VOL PR
18 2019 14 6 21 22
(Without TELETEXT)
1
3
16
1114
15
6
89
13
12
7
2
4
17
Shown is a simplified representation offront panel.
POWER r MENU OK VOL PR
POWER r MENU OK -VOL+ -PR+
18 1920 14 21 226
-
Basic operationOn and off1. Press the main power button to switch the set on.2. If the set is in standby mode, press the POWER, / or
NUMBER buttons on the remote control handset to switch it onfully.
3. Press the POWER button on the remote control handset. The set reverts to standby mode.
4. Press the main power button again to switch the set off.
Note : If, while the set is switched on, the mains plug is discon-nected the set will switch to standby on or power on when themains plug is replaced in the mains power socket.
Programme selectionYou can select a programme number with the / or NUMBERbuttons.Before entering double digit programme numbers, press the -/--button until the display __ appears on the screen.
Volume adjustmentPress the /button to adjust the volume.
Mute functionPress the MUTE button. The sound is switched off and the displayWW appears. You can cancel it by pressing the MUTE, /, SSMor PSEUDO button.
Quick viewPress the Q.VIEW button to view the last programme you werewatching.
On screen language selection (option) This is an optional function. In the models which have on screenlanguage function, the menu can be displayed on the screen in thedesired language. First select your language.
1. Repeatedly press the MENU button to select MENU 4.2. Press the / button to select LANGUAGE.3. Press the OK button to display the sub menu.4. Press the / button to select the desired language.
All the on screen displays will appear in the selected language.5. Press the MENU button repeatedly or TV/AV button once to
return to normal TV viewing.
POWER MUTE
1 2 3 PSM
4 5 6 PSEUDO
7 8 9 TV/AV
Q.VIEW 0 TEXT
SLEEP -/--SSM
MENU
EYE DUAL SYSTEM
SIZE HOLD
START
QSRQSR
LENGTH SP/LP ON/OFF
CH+CH+ REWREW PLAYPLAY FFFF
CH- P/STILL STOP REC
UPDATE EXPAND
MIX TIME REVEAL MODE
PR
PR
OK
VOL VOL
MM
-
On screen menusThe dialogue between you and your set takes place on screen with an operatormenu. The buttons required for the operating steps are also displayed.Menu selection1. Repeatedly press the MENU button to display each menu.2. Press the / button to select a menu item.
The selected menu item changes from green to purple.3. Press the /button to change the setting of a menu item or
OK button to display the sub menu.Note :a. The menus automatically disappear in about 12 seconds if you
do not press a button. b. In the AV mode, MENU 1 is not displayed.
In some models, the menu item AUTO AV is not displayed onthe screen in the PROGAM EDIT mode.
c. In the teletext mode, MENUs are not displayed.d. In some models, the menu item LANGUAGE is also displayed
on the screen in MENU 4 and the menu item NTSC3.58 orSECAM is not displayed on the screen in the SYSTEM mode.
POWERPOWER MUTEMUTE
1 2 3 PSM
4 5 6 PSEUDO
7 8 9 TV/AV
Q.VIEW 0 TEXT
SLEEP -/--
MENU
EYE DUAL SYSTEM
SIZE HOLD
START
QSRQSR
LENGTH SP/LP ON/OFF
CH+CH+ REWREW PLAYPLAY FFFF
CH- P/STILL STOP REC
UPDATE EXPAND
MIX TIME REVEAL MODE
PR
PR
OK
VOL VOL
MM
MANUALOPROGRAMAUTO OPROGRAMPROGRAMOEDIT
()OOKOMENU
O80OCONTRASTO60OBRIGHTNESSO50OCOLOUROOOOOOOOO50OSHARPNESS
O....()O}{OOKOMENU
ZO50OVOLUME OO50OTREBLEOOOOOOOOO50OBASSOOOOOOOOO 0 BALANCEO
O
....()O}{OOKOMENU
MENU 1
MENU 2
MENU 3
MENU 4
MENU 5TV programme
VHF_LOOOOOOOOOOO1
...............MENU
PROGRAMOOOOOOOO1FINEOOOOOOOOO{{{SEARCHOOOOOOO{{{BANDOOOOOOOVHF_L
..............()O}{O0_9OOKOMENU
PR.OOO1OOOPR.OO__SKIPOOOOOO OOOOOFFAUTOOAVOOOOOOOOOON
()O}{O0_9OOKOMENU
FAVOURITEO1FAVOURITEO2
()OOKOMENU
CLOCKOOOOOO__:__OOOFFOTIMEOOO__:__OONOOTIMEOOO__:__OOONOOPR.OOOOO1
INPUTOOOOOOTVCHILDOLOCKOOFFAUTOOSLEEPOOFFSYSTEMOOOOOOOOO
()O}{OOKOMENU
AUTOPALSECAMNTSC4.43NTSC3.58
()OOKOMENU
-
Setting up TV stationsUp to 100 TV stations can be stored in this set by programme numbers(0 to 99). Once you have preset the stations, you will be able to usethe / or NUMBER buttons to scan the stations you programmed.Stations can be tuned using an automatic or a manual mode.Auto programme tuningAll stations that can be received are stored by this method. It isrecommended that you use auto programme during installation of this set.1. Press the MENU button to select MENU 1.2. Press the / button to select AUTO PROGRAM.3. Press the OK button to begin auto programming.The band automatically changesVHF-L AVHF-H AUHF.When auto programming is completed, the station stored into pro-gramme number 1 will appear on the screen. To stop auto programming, press the MENU button. The activestation at that time will be displayed.Note : Some undesired stations may be stored, such as noisy orunclear signals from distant transmitters. You can easily skip thesestations by entering PROGRAM EDIT mode.Manual programme tuningManual programme lets you manually tune and arrange thestations in whatever order you desire.1. Press the MENU button to select MENU 1.2. Press the / button to select MANUAL PROGRAM.3. Press the OK button to display the MANUAL PROGRAM mode.
4. Press the / button to select PROGRAM. Select the desiredprogramme number with the / or NUMBER buttons.
5. Press the / button to select BAND. Press the /button to select VHF-L, VHF-H or UHF as required.
6. Press the / button to select SEARCH. Press the /button to commence searching. To stop the search at any timepress the MENU or / button.
7. If this station is the one required store it with the OK button, ifnot press the / button again.
8. To store another station repeat steps 4 to 7.9. Press the MENU button repeatedly or TV/AV button once to
return to normal TV viewing.Fine tuningNormally fine tuning is only necessary if reception is poor.1. Repeat steps 1 to 3 above.2. Press the / button to select FINE.3. Press the / button to fine tune for the best picture and
sound. If the button is pressed, the display {{{ will appear.And if the button is pressed, the display }}} will appear.
4. Press the OK button to store the new setting. The displaySTORED will appear.
5. Press the MENU button repeatedly or TV/AV button once toreturn to normal TV viewing.The finely tuned programme will be indicated by yellow numberduring programme selection.
POWERPOWER MUTEMUTE
1 2 3 PSM
4 5 6 PSEUDO
7 8 9 TV/AV
Q.VIEW 0 TEXT
SLEEP -/--
MENU
EYE DUAL SYSTEM
SIZE HOLD
START
QSRQSR
LENGTH SP/LP ON/OFF
CH+CH+ REWREW PLAYPLAY FFFF
CH- P/STILL STOP REC
UPDATE EXPAND
MIX TIME REVEAL MODE
PR
PR
OK
VOL VOL
MM
MENU 1MANUALOPROGRAMAUTO OPROGRAMPROGRAMOEDIT
()OOKOMENU
PROGRAMOOOOOOOO1FINEOOOOOOOOO{{{SEARCHOOOOOOO{{{BANDOOOOOOOVHF_L
..............()O}{O0_9OOKOMENU
-
Setting up TV stationsProgramme editThis function enables you to rearrange the programmes stored byauto programming in whatever order you desire. Also you can skipparticular programme numbers stored by auto programming. 1. Press the MENU button to select MENU 1.2. Press the / button to select PROGRAM EDIT.3. Press the OK button, and the PROGRAM EDIT mode will
appear.
Exchanging programmes1. Press the / button to change the left hand programme
number. The viewing station corresponding to the new pro-gramme number is shown on the screen.
2. Press the NUMBER buttons to enter the desired right handprogramme number. Any number under 10 is entered with anumeric '0' in front of it, i.e. '05' for 5.
3. Press the OK button. The station stored in the right handprogramme number wil l now appear as the left handprogramme number.
4. Repeat steps 1 to 3 to exchange other programmes.
Skipping the stored programme 1. Press the / button to select the programme you want to
skip. The viewing station corresponding to the selectedprogramme number is shown on the screen.
2. Press the / button to select SKIP.3. Press the /button to select ON or OFF.
If you select ON, the selected station is skipped.4. Press the OK button. The display STORED will appear.5. Press the / button to select first menu item then repeat
steps 1 to 4 to skip another programme.The selection of the skipped programme numbers with theNUMBER buttons is still possible and they will be indicated by cyannumbers during programme selection.Auto AV setting (option)If your VCR outputs a switching voltage when it is switched toplayback, select AUTO AV ON with the VCR connected to Euroscart socket. The set is automatically switched to AV-1 mode whenan AV signal is input. But if you want to keep on watching TVmode, set AUTO AV to OFF.1. Press the /button to select the desired programme.2. Press the / button to select AUTO AV.3. Press the /button to select ON or OFF.4. Press the OK button. The display STORED will appear.5. Repeat steps 1 to 4 to set another programme.Press the MENU button repeatedly or TV/AV button once to returnto normal TV viewing.
POWERPOWER MUTEMUTE
1 2 3 PSM
4 5 6 PSEUDO
7 8 9 TV/AV
Q.VIEW 0 TEXT
SLEEP -/--
MENU
EYE DUAL SYSTEM
SIZE HOLD
START
QSRQSR
LENGTH SP/LP ON/OFF
CH+CH+ REWREW PLAYPLAY FFFF
CH- P/STILL STOP REC
UPDATE EXPAND
MIX TIME REVEAL MODE
PR
PR
OK
VOL VOL
MM
MENU 1MANUALOPROGRAMAUTO OPROGRAMPROGRAMOEDIT
()OOKOMENU
PR.OOO1OOOPR.OO__SKIPOOOOOO OOOOOFFAUTOOAVOOOOOOOOOON
()O}{O0_9OOKOMENU
-
Picture adjustmentPicture adjustmentYou can adjust picture contrast, brightness, colour intensity,sharpness and tint (NTSC input only) to the levels you prefer.1. Repeatedly press the MENU button or the EYE button to select
MENU 2.2. Press the / button to select the desired picture item.3. Press the /button to make appropriate adjustments.At this point you can complete your adjustments or store yoursetting for immediate recall by following steps 4 to 6.4. Press the OK button.
5. Select FAVORITE 1 or FAVORITE 2 with the / button.The FAVORITE 1 or FAVORITE 2 options allow you toprogramme two entirely different picture settings for variouslighting conditions such as day and night.
6. Press the OK button. The display STORED will appear.
To recall your preferred setting, press the PSM button until thedesired picture (STANDARD, FAVORITE 1 or FAVORITE 2)appears. The STANDARD picture is programmed for good picturereproduction at the factory and cannot be changed.
Algorithm eye (option)This set sets the picture according to the condition of surroundingsafter analyzing such conditions of a room as a brightness and akind of a light. So you can always enjoy the most proper picture toyour eyes with a natural colour according to the surroundings.
1. To make the Algorithm eye perform press the EYE button untilEYE ON is displayed as shown below.
You can make the Algorithm eye perform with the MENUbutton. Press the EYE button until EYE ON is displayed afterselecting MENU 2 with the MENU button.
2. Press the OK button.
Note : To switch off the Algorithm eye, press the EYE button untilEYE ON disappears or adjust the picture item to the levels youprefer.
POWERPOWER MUTEMUTE
1 2 3 PSM
4 5 6 PSEUDO
7 8 9 TV/AV
Q.VIEW 0 TEXT
SLEEP -/--
MENU
EYE DUAL SYSTEM
SIZE HOLD
START
QSRQSR
LENGTH SP/LP ON/OFF
CH+CH+ REWREW PLAYPLAY FFFF
CH- P/STILL STOP REC
UPDATE EXPAND
MIX TIME REVEAL MODE
PR
PR
OK
VOL VOL
MM
MENU 2O80OCONTRASTO60OBRIGHTNESSO50OCOLOUROOOOOOOOO50OSHARPNESS
O....()O}{OOKOMENU
O80OCONTRASTO60OBRIGHTNESSO50OCOLOUROOOOOOOOO50OSHARPNESS
O
()O}{OOKOMENU
EYEOONO
FAVOURITEO1FAVOURITEO2
()OOKOMENU
-
Sound adjustmentSound adjustmentYou can adjust the sound treble, bass and balance to the levelsyou prefer.
1. Press the MENU button to select MENU 3.2. Press the / button to select the desired sound item.3. Press the /button to make desired adjustment.4. Press the OK button to store.
To recall your preferred setting, press the SSM button until thedesired sound (STANDARD, FAVORITE 1 or FAVORITE 2)appears. The STANDARD sound is programmed for good soundreproduction at the factory and cannot be changed.
Sound output selectionIn AV mode, you can select output sound for the left and rightloudspeakers.
Repeatedly press the DUAL button to select the sound output.
LR : Audio signal from audio L input is sent to left loudspeaker andaudio signal from audio R input is sent to right loudspeaker.
LL : Audio signal from audio L input is sent to left and rightloudspeakers.
RR :Audio signal from audio R input is sent to left and right loud-speakers.
Pseudo stereoIn the models which have the pseudo stereo function, you canexperience sound effect as stereo sound by pressing the PSEUDObutton.
1. Press the PSEUDO button. The display will appear on the screen.
2. Press the button again to switch pseudo stereo off.The PSEUDO button is a toggle switch.
POWERPOWER MUTEMUTE
1 2 3
4 5 6 PSEUDO
7 8 9 TV/AV
Q.VIEW 0 TEXT
SLEEP -/--
MENU
DUAL
SSM
SYSTEM
SIZE HOLD
START
QSRQSR
LENGTH SP/LP ON/OFF
CH+CH+ REWREW PLAYPLAY FFFF
CH- P/STILL STOP REC
UPDATE EXPAND
MIX TIME REVEAL MODE
PR
PR
OK
VOL VOL
MM
MENU 3 ZO50OVOLUME OO50OTREBLEOOOOOOOOO50OBASSOOOOOOOOO 0 BALANCEO
O
....()O}{OOKOMENU
-
Other functionsTV and AV modesInputs can be set for TV or AV mode. AV mode is used when a videocassette recorder (VCR), or other equipment is connected to the set.Note : When a VCR is connected via the aerial socket the set is usedin TV mode. See the 'Connection of external equipment' section.1. Repeatedly press the MENU button to select MENU 4.2. Press the / button to select INPUT.3. Press the /button to select TV, AV1 or AV2.4. Press the OK button.Alternatively you can select the TV or AV mode by pressing theTV/AV button.Child lockThe TV can be set so that the remote control handset is needed tocontrol it. This feature can be used to prevent unauthorised viewing.1. Repeatedly press the MENU button to select MENU 4.2. Press the / button to select CHILD LOCK.3. Press the /button on the remote control handset to select ON.4. Press the OK button to return to normal TV viewing. With the lock on, the display CHILD LOCK ON appears on the screenif any button on the front panel is pressed while viewing the TV.Auto sleepIf you select AUTO SLEEP ON the set will automatically switchitself to standby mode approximately ten minutes after a TV stationstops broadcasting.1. Repeatedly press the MENU button to select MENU 4.2. Press the / button to select AUTO SLEEP.3. Press the /button to select ON.4. Press the OK button to return to normal TV viewing.Colour system settingThis set is adjusted for the main TV system in your area. Undernormal circumstances, select AUTO. If necessary (if input signal isweak, colour and sound are poor), change the colour system byusing the instructions below. 1. Repeatedly press the MENU button to select MENU 4.2. Press the / button to select SYSTEM .3. Press the OK button to display the sub menu .4. Press the / button to select the correct colour system.5. Press the OK button to store the setting. The display STORED
will appear.You can directly display the system selection mode by pressing theSYSTEM button. And then repeat steps 4 to 5 above.Note :a. If you adjusted the system as shown steps above, the colour
system appears in cyan when the current mode is displayed bypressing the OK button.
b. When receiving the system NTSC3.58, select NTSC3.58.c. The colour system which the set cannot receive could be
selected but not operated.Sleep timerYou don't have to remember to switch the set off before you go tosleep. The sleep timer automatically switches the set to standbyafter the preset time elapses.For selecting your desired number of minutes, press the SLEEPbutton several times or continuously. --- will appear on the screen,followed by 120, 90, 60, 30, 20 and 10. The timer begins to count down from the number of minutes selected.Note :a. To view the remaining sleep time, press the SLEEP button once.b. To cancel the sleep time, repeatedly press the SLEEP button
until the display SLEEP--- appears.c. When you switch the set off, the set releases the preset sleep time.
MENU 4
POWERPOWER MUTEMUTE
1 2 3 PSM
4 5 6 PSEUDO
7 8 9 TV/AV
Q.VIEW 0 TEXT
SLEEP -/--
MENU
EYE DUAL SYSTEM
SIZE HOLD
START
QSRQSR
LENGTH SP/LP ON/OFF
CH+CH+ REWREW PLAYPLAY FFFF
CH- P/STILL STOP REC
UPDATE EXPAND
MIX TIME REVEAL MODE
PR
PR
OK
VOL VOL
MM
INPUTOOOOOOTVCHILDOLOCKOOFFAUTOOSLEEPOOFFSYSTEMOOOOOOOOOO
()O}{OOKOMENU
-
Time settingClock The clock uses the 24 hour system, and must be set to the correcttime before operating the set. You must set the clock correctlybefore using on/off time functions.
1. Repeatedly press the MENU button to select MENU 5.2. Press the / button to select CLOCK.3. Adjust hour and minute with the / button or NUMBER
buttons.4. Press the OK button to return to normal TV viewing.
Off timeThe set automatically switches off at the preset time.
1. Repeatedly press the MENU button to select MENU 5.2. Press the / button to select OFF TIME .3. Adjust hour and minute with the / button or NUMBER
buttons.4. Press the OK button to return to normal TV viewing.
On timeThe set automatically switches on at the preset time and station.
1. Repeatedly press the MENU button to select MENU 5.2. Press the / button to select ON TIME.3. Adjust hour and minute with the / button or NUMBER
buttons.4. Press the / button to select ON PR. then press the /
button or NUMBER buttons to select the desired programmenumber.
5. Press the OK button to return to normal TV viewing.
Note : a. In the event of power interruption (disconnection or power
failure), the clock must be reset.b. If the same time is set for the on time and the off time, only the
off time operates.c. This set must be put into standby mode with the POWER button
on the remote control handset to operate the on time function.d. If the on time function activates, the TV will automatically switch
to the on time programme number, even during viewing.e. Two hours after the set is turned on by the on time function it
will automatically switch back to standby mode unless a buttonhas been pressed.
f. Once the on or off time is set, these functions operate daily atthe preset time.
MUTEMUTE
1 2 3 PSM
4 5 6 PSEUDO
7 8 9 TV/AV
Q.VIEW 0 TEXT
SLEEP -/--
MENU
EYE DUAL SYSTEM
SIZE HOLD
START
QSRQSR
LENGTH SP/LP ON/OFF
CH+CH+ REWREW PLAYPLAY FFFF
CH- P/STILL STOP REC
UPDATE EXPAND
MIX TIME REVEAL MODE
PR
PR
OK
VOL VOL
MM
POWER
CLOCKOOOOOO__:__OOOFFOTIMEOOO__:__OONOOTIMEOOO__:__OOONOOPR.OOOOO1
()O}{O0_9OOKOMENU
MENU 5
-
Teletext (option)Teletext is an optional function, therefore only a set with theteletext system can receive the teletext broadcast.Teletext is a free service broadcast by most TV stations whichgives up-to-the-minute information on news, weather, televisionprogrammes, share prices and many other topics.The teletext decoder of this TV can support the Simple, TOP andFASTEXT systems. Simple mode consists of a number of pages whichare selected by directly entering the corresponding page number. TOPand FASTEXT are more modern methods allowing quick and easyselection of teletext information. Switch on/off Press the TEXT button to switch to teletext. The initial page or lastselected page appears on the screen. Two page numbers, TV station name, date and time are displayedon the screen headline. The first page number indicates yourselection, while the second shows the current page displayed.Press the TEXT or TV/AV button to switch off teletext. The previousmode reappears.Simple modeIf the TV is in TOP or FASTEXT mode, press the MODE button toswitch to LIST mode.Page selection1. Enter the desired page number as a three digit number with the
NUMBER buttons. If during selection you press a wrongnumber, you must complete the three digit number and then re-enter the correct page number.
2. The / button can be used to select the preceding orfollowing page.
TOP modeThe user guide displays four fields-red, green, yellow and blue atthe bottom of the screen. The yellow field denotes the next groupand the blue field indicates the next block.Block/group/page selection1. With the BLUE button you can progress from block to block.2. Use the YELLOW button to proceed to the next group with
automatic overflow to the next block.3. With the GREEN button you can proceed to the next existing
page with automatic overflow to the next group. Alternatively thebutton can be used.
4. The RED button permits to return to previous selection. Alternativelythe button can be used.
Direct page selectionCorresponding to the Simple mode, you can select a page by enteringit as a three digit number using the NUMBER buttons in TOP mode.FASTEXT modeThe teletext pages are colour coded along the bottom of the screenand are selected by pressing the corresponding coloured button.Page selection1. Press the INDEX button to select the index page.2. You can select the pages which are colour coded along the
bottom line with the same coloured buttons.3. Corresponding to the Simple mode, you can select a page by
entering its three digit page number with the NUMBER buttonsin FASTEXT mode.
4. The / button can be used to select the preceding orfollowing page.
POWERPOWER MUTEMUTE
1 2 3 PSM
4 5 6 PSEUDO
7 8 9 TV/AV
Q.VIEW 0 TEXT
SLEEP -/--
MENU
EYE DUAL SYSTEM
SIZE HOLD
START
QSRQSR
LENGTH SP/LP ON/OFF
CH+CH+ REWREW PLAYPLAY FFFF
CH- P/STILL STOP REC
UPDATE INDEX
MIX TIME REVEAL MODE
PR
PR
OK
VOL VOL
MM
TXT
-
Teletext (option)Special teletext functions
REVEALPress this button to display concealed information, such assolutions of riddles or puzzles.Press this button again to remove the information from the display.
SIZESelects double height text.Press this button to enlarge the top half of the page.Press this button again to enlarge the bottom half of the page.Press this button again to return to the normal display.
UPDATEDisplays the TV picture on the screen while waiting for the newteletext page. The display will appear at the top left handcorner of the screen. When the updated page is available thendisplay will change to the page number. Press this button to view the updated teletext page.
HOLDStops the automatic page change which will occur if a teletext pageconsists of 2 or more sub pages. The number of sub pages and thesub page displayed is, usually, shown on the screen below thetime. When this button is pressed the stop symbol is displayed atthe top left-hand corner of the screen and the automatic pagechange is inhibited.To continue press this button again.
MIXDisplays the teletext pages superimposed on the TV picture.To switch the TV picture off press this button again.
TIMEWhen viewing a TV programme, press this button to display thetime at the top right hand corner of the screen. Press this buttonagain to remove the display. In the teletext mode, press this buttonto select a sub page number. The sub page number is displayed atthe bottom of the screen. To hold or change the sub page, pressthe RED/GREEN, / or NUMBER buttons. Press again to exitthis function.
POWERPOWER MUTEMUTE
1 2 3 PSM
4 5 6 PSEUDO
7 8 9 TV/AV
Q.VIEW 0 TEXT
SLEEP -/--
MENU
EYE DUAL SYSTEM
SIZE HOLD
START
QSRQSR
LENGTH SP/LP ON/OFF
CH+CH+ REWREW PLAYPLAY FFFF
CH- P/STILL STOP REC
UPDATE EXPAND
MIX TIME REVEAL MODE
PR
PR
OK
VOL VOL
MM
TXT
-
Connection of external equipmentYou can connect additional equipment, such as VCRs, camcordersetc. to your set. Here shown may be somewhat different from yourset.
Aerial socket
1. Connect the RF out socket of the VCR to the aerial socket onthe back of the set.
2. Connect the aerial cable to the RF aerial in socket of the VCR.3. Store the VCR channel on a desired programme number using
the 'Manual programme tuning' section.4. Select the programme number where the VCR channel is stored.5. Press the PLAY button on the VCR.
Audio/Video in/out sockets
1. Connect the audio/video out sockets of the VCR to audio/videoin sockets of the set and in sockets of the VCR to out sockets ofthe set.
2. Press the TV/AV button to select AV. 3. Press the PLAY button on the VCR.
The VCR playback picture appears on the screen.
You can also record programmes received by the TV on video tapevia audio/video out sockets.
Euro scart socket
If your set has the Euro scart socket,
1. Connect the euro scart socket of the VCR to the Euro scartsocket of the set.
2. Press the PLAY button on the VCR.If your VCR outputs a switching voltage the set will switch to AVmode automatically.Otherwise, press the TV/AV button on the remote controlhandset to select AV. The VCR playback picture appears onthe screen.
VCR
75
VIDEO (R)-AUDIO-(L)
VCR
VCR
75
75
IN
OUT
IN
OUT
R L
VIDEO AUDIOL/MONO
VCR
-
Troubleshooting check list
The mains plug-(plugged in andswitched on)Is the TV switched on
Try another channel (weak signal)Check aerial (plugged into TV?)Check aerial (broken lead?)Check aerial
Check for local interference
Adjust contrastAdjust brightnessAdjust colourAdjust volumeCheck the batteries in remote control
Check Audio/Video sockets (VCR only)
Check these items and try toadjust these
SymptomsNo picture, no sound
Sound OK, poor picture
Picture OK, poor sound
Picture blurred
Lines or streaks in picture
Poor reception on some channels
No colour
Poor colour
Remote control does not work
-
DEAD SET(NO RASTER/NO SOUND)
Check +B voltage at J131
Check the heater elements ofCPT are lighting or not
Check/Replace FR423
Check the voltage atC430(+)
Check/Replace IC430R430, IC401, D411, FR422
Check/Replace IC501
Check the voltageat pin21 of IC501
Check the rectified voltage ofmain power at C817(+)
Check/Replace F801, DB813, R821, T801
Check the voltage at pin9 of IC802
Check/Replace D810, ZD810, Q810
Check/Replace IC802, D806, D811.Check the secondary
voltage are shortCheck/Replace IC01
(IC202, IC01T, IC02T:in case of with TXT)
0V
0V
150 ~ 380V
6~ 8V
over 0.4V
8V
No
Yes
0.1V
0.1V
Lower than 6V
112V(or 118V)
Troubleshooting Guide
-
NO PICTURE/NO SOUND
Check the voltage of TUNER MB(12V)
Check/ReplaceTuner
Check the tuningcondition
Check the 33V at C416(+)
Check/Replace R421, ZD404
Check/ReplaceFR422, D411, IC401
(RASTER OK)
11.8~ 12.2V
0V
-
NO RASTER(SOUND OK)
Check heater elements of CRT are lighting
Check the AC voltage at H/Tpin of CPT SOCKET
on CPT board
Check/ReplaceCPT
Check/ReplaceFR423, 420
The screen isblinking
Check replaceIC501
Readjust WhiteBalance
Check the 180Vline at C418(+)
Check/ReplaceD413
Retrace lineis visible
Check the screen voltage (G2)alignment is correct or not
Check the screen colour
Check the base voltage of Q901-Q903
Check/ReplaceD901~ D903
Check/ReplaceR918-920 or
solderingcondition onCPT board.
No Yes
Abnormal
White
Abnormal
R/G/B
Normal
12V 4~ 5V
6.0~ 6.5Vrms
0Vrms
-
NO SOUND(PICTURE OK)
Check the voltage(SMPS 25V) at pin5 of IC601
Check/Replace of FR804, D801
Check the soldering state around IC601
Check/Replace IC01
Check/Replace IC430
Check/Replace IC501
Check the voltage at pin16of IC501
Check/Replace Q508(TV/AV, TXT switch)
Check the voltage at pin 10 of IC501
Check the voltage at pin 5 of IC501
Check the voltage at pin 4of IC630
Check/Replace IC401,FR422
Check I2C BUS(SCL,SDA) of IC630
Check/Replace IC630Check the voltage at pin 8
of IC601
Check/Replace IC01 Check/Replace IC601
Abnormal
Abnormal
Normal(20~ 27V)
10~ 12V
Normal
7~ 9V0V
-
NO COLOR
Check the frequency(4.43/3.58MHz)at pin 34.35 of IC501
Check/ReplaceX501, 502
Check/ReplaceIC501
Check/ReplaceIC01
Check/ReplaceIC501
Check/ReplaceIC503
Check/ReplaceIC502
Check the voltageof PIN27 of IC501.
Check whether the voltage is swing or not at the pin5 of IC01 according to
changing colour up/down
Check whether R-Y and B-Y are outfrom pin30 and pin31 of IC501
Check whether R-Y and B-Y areout from pin9 and pin10 of IC503
Check whether R-Y and B-Y areout from pin11 and pin12 of IC502
Check wheter R/G/B is out frompin20, pin19 and pin18 of IC501
Check/ReplaceIC501
Abnormal
Abnormal
Swing
Swing
Yes
Yes
No
Below 5V
Not
Not
No
No
Normal
-
NO TELETEXT
Check the voltage 12V at C403(+)
Check the 12V line to be correct
Check/ReplaceIC02T
Check/ReplaceQ01T
- Check/ReplaceIC01T, IC02T-COM(IC01)
- Check all the connections ofSDA SCL
Check the voltage ofC13T(+)
Check video signal isnormal at the pin8 of IC01T
Check I2C Bus (SDA, SCL)
Check/Replace X01T
Abnormal
Abnormal
Normal
4.8~ 5.2V
Yes
Yes
NO
NO
-
: Safety precautions
1. It is safe to adjust after using insulating transformerbetween the power supply line and chassis input toprevent the risk of electric shock and protect theinstrument.
2. Never disconnect leads while the TV receiver is on.3. Dont short any portion of circuits while power is on.4. The adjustment must be done by the correct appliances.
But this is changeable in view of productivity.5. Unless otherwise noted, set the l ine voltage to
220Va c!20%, 50/60Hz.
: Test Equipment required
1. Swee p Generator2. Marker Generator(38.0MHz: Picture/32.5MHz: Sound)3. Alignmen t Scope(5121A)4. Patter n Generator(PAL/SECAM)5. DC Power Supply6. Color analyzer7. Multimeter(Volt meter)
: VCO (Voltage Controlled Oscillator)Adjustment
1 ) Turn on DC power supplies.2) Adjust VCO ADJ. coi l (VL501) so that the level of Picture
Carrier (PC) may be at the lowest position as shown Fig.2.
NOTE: When performing this adjustment, if there are 2adjusted point in VL501, select the lower coreposition.
: RF AGC (Auto Gain Control) Adjustment
The RF AGC contro l VR501 was aligned at the time ofmanufacture for optimum performance over a wide rangeconditions. Readjust o f VR501 should not be necessaryunless unusual local conditions exist, such as;
1 ) Channel interference in a CATV system2) Picture bending and/or color beats, which are unusually
due to excessive RF signal input when the reciever istoo close to a transmitting tower or when the receiveris connected to an antenna distribution system wherethe RF signal has been amplified.In this case, the input signal should be attenuated(withpad or filter) to a satisfactory level.
3) Picture noise caused by "broadcast noise" or weaksignal.If the broadcast is "clean" and the RF signal is at least1mV (60dBu), the picture will be noise free in any area.
- 1 -
ADJUSTMENT INSTRUCTIONS
Preparation for VCO Adjustment
1 . Connect the measuring equipment to the TV as shown inFig. 1
2. Set RF output level of Sweep Generator to 90dBuV.
MAIN BOARD
5
1
7
48
3.3K IC401
(JP 6)VL501VCO ADJ.
CK0.01uF
Z101(JP 1)
C533(JP 3)
L504
(JP 4)
TUNER
Hor
Ver
AlignmentScope
SWEEP S.Gwith Marker
DC POWERSUPPLY5.0 +0.1V
DC POWERSUPPLY16 +0.5V
IC501
RFout
J9AGCADJ.
Fig. 1: Connection Diagram of Equipment for VCO Adjustment
SC (Sound Carrier) : 32.5 MHz
PC (Picture Carrier) : 38.0 MHz
Fig. 2: Output waveform on Alignment Scope
Test Point : J9(AGC ADJ.) or Observing Display
Adjust : VR501
Test Point : JP4(L504)
Adjust : VL501
-
Adjusting the VR501(RF AGC) control to one end ofrotation will usually cause a relatively poor signal to noiseratio;Adjusting to the other end of rotation will usually cause adegradation of over load capabilities resulting on colorbeats or adjacent channel interference.For the best results, adjust VR501 contol whileperforming on all other local channels, or Refer to thefollowing Table 1.
: Vertical Height, Center Adjustment
1) Tune the TV set to receive a digital test pattern.2) Set standard picture mode(contrast: 80, bright :60,
color: 50).3) Adjust the Verical height control (VR301) so that the
circle of a digital test pattern may be located withinthe effective screen of the CPT.
4) Adjust the Vertical center control (VR302) forobtaining geometric center of valuable displayvertically.
: Focus Adjustment
NOTE: This adjustment should be performed afterwarming up for 10 minutes.
1) Tune the TV set to receive a digital test pattern.2) Adjust the Focus control for the best overall focus.
: Horizontal Center Adjustment
1) Tune the TV set to receive a PAL digital pattern.2) Adjust the Horizontal center control (VR502) for
obtaining geometric center of valubale displayhorizontally.
: Screen & White Balance (color temperature) Adjustment
NOTE:
1) Set all the controls (VR901-VR905) on CPT Board togeometric center position.
2) Set the standard mode (contrast : 80, bright : 60, color : 50).3) Set the AV mode, adjust and set the screen volume of
FBT at just cut-off position(No AV input signal).4) Set the TV mode, tune the TV set to receive white
pattern.5) By using color analyzer (white balance checker), adjust
X position equals to 281!8 and Y position equals to288!8, it means that color temperature is 10000!800Kat low light (4.5ftL) and high light (over 45ftL).
- 2 -
Tuner P/N
113-118B/F/J
113-238H
6700VMV001A
Maker
LG-ALPS
LG-ALPS
SANYO
REMARK
RF 60!1dBuV
RF 60!1dBuV
RF 60!1dBuV
Adjustment Voltage
5.7!0.1Vdc
6.0!0.1Vdc
4.9!0.1Vdc
Test Point : Observing display
Adjust : VR301 (Vertical Height)VR302 (Vertical Center)
Test Point : Observing display
Adjust : Focus control of FBT
Test Point : Observing display
Adjust : VR502
1. This adjustment should be performed afterwarming up for 20 minutes.
2. The color bias controls (VR901, VR902, VR903)affect the low light (dark) area of the picturewhile the color drive controls (VR904, VR905)affect the high light (white) areas.
-
- 1 -
943400
104
600
912
120
963
300
320330
310
521
112
102
153
913
150
170
103
503
502
500
P801
501
700
OPTION
EXPLODED VIEW
-
- 2 -
EXPLODED VIEW PARTS LIST
LOCA. NO PART NO DESCRIPTIONS
102 341-721A HOLDER,D-COIL (FOR AUTO.L=65)
103 341-721B HOLDER,D-COIL (FOR AUTO.L=130)
104 343-B52A SUPPORTER,PCB
112 2055-V1221G CPT A48QAD220X 03R7ND(-0.1G) 20"
2055-V1221B CPT A48QAD220X 03N7ND(-0.2G) 20"
2055-V1221C CPT A48QAD220X 03M7ND(+0.3G) 20"
2055-V1221D CPT A48QAD220X 03K7ND(+0.2G) 20"
2055-V1221E CPT A48QAD220X 03P7ND(+0.1G)20",CYSCO-IN
2055-V1221R CPT A48QAD220X 03N7AD(+0.4G) 20"
2055-V1221H CPT A48QAD220X 03T7ND
2055-V0672V CPT A51KPD12XX 14R7KR(-0.1G) 21"
2055-V0674C CPT A51KPD12XX 14L7KR(+0.5G) 21"
2055-V0672Q CPT A51KPD12XX 14M7KR(+0.3G) 21"
2055-V0672L CPT A51KPD12XX 14N7KR(-0.2G) 21"
2055-V0672P CPT A51KPD12XX 14K7KR(+0.2G) 21"
2055-V0062X CPT A51KPD12XX 14P7KR *CYSCO-IN
120 120-C77G SPEAKER C122P02K1459 8OHM 10
150 150-D02M COIL,DEGAUSSING,CU 20" 60T 15OHM
150-D02N COIL,DEGAUSSING,CU 21" 60T 12OHM
153 153-276A DY DCAM1-20PLAA 20"
153-110F DY DCAN1-21FSAA 21"
170 170-851B LEAD SET ASSY,CPT EARTH(L=640)
300 3106V00024H CABINET UNIT 20"
3106V00040K CABINET UNIT 21"
310 5020V00067A BUTTON,CONTROL
320 320-075B SPRING,KNOB
330 5020V00066A BUTTON,POWER 20"
5020V00077A BUTTON,POWER 21"
400 3809V00026B BACK COVER ASSY (JACK)
3809V00026L BACK COVER ASSY (SCART)
3809V00026F BACK COVER ASSY (LGEPL,SCART)
500 6871VMM035X PWB ASSY,MAIN(64B)20",W/3.58/TXT
6871VMM122L PWB ASSY,MAIN(64B)20" TXT,SCART,HYER
6871VMM122Z PWB ASSY,MAIN(64B)20",LGEMK
6871VMM122W PWB ASSY,MAIN(64B)20" IRAN,SET
6871VMM134J PWB ASSY,MAIN(64B)20",SCART,ENG+MUL.
6871VMM035Z PWB ASSY,MAIN(64B)20",W/3.58,W/O TXT
6871VMM048Z PWB ASSY,MAIN(64B)20",PHONE,ENG+AR
6871VMM035W PWB ASSY,MAIN(64B)21",W/3.58/TXT
6871VMM122J PWB ASSY,MAIN(64B)21",TXT,CIS,PHONE
6871VMM122A PWB ASSY,MAIN(64B)21",W/3.58,W/O TXT
6871VMM134K PWB ASSY,MAIN(64B)21",SCART,ENG+MUL.
6871VMM122V PWB ASSY,MAIN(64B)21",IRAN,SET
6871VMM134C PWB ASSY,MAIN(64B)21",SCART,ENG+RUS.
6871VMM122B PWB ASSY,MAIN(64B)21",TXT,SCART,HYPER
6871VMM134A PWB ASSY,MAIN(64B)21",W/O TXT,SCART,HYPER
501 6871VSM151A PWB ASSY,TXT(64B) SET, RUSIA
6871VSM151C PWB ASSY,TXT(64B) SET, EAST
502 303-F62A COVER,TUNER
503 351-012A LINK,POWER S/W
521 341-783A HOLDER,LED
600 6871VMM036A PWB ASSY,FRONT A/V (64B)SUB
700 0IGL120104A CDS SENSOR MODULE
912 1PRF0302816 SCREW,BRAIZER HD D3 L12 MSWR3/BK
913 332-057B SCREW ASSY,HEXAGON HEAD
931 1PWG0302816 SCREW,BRAZ WASH HD D3.0 L12.0
943 1PPF0403116 SCREW,PAN HEA D4 L16
963 332-240A SCREW ASSY,P TYPE+WASHER(4*12+D14)
P801 174-009E CORD,POWER(W/HOLD,HOUSING,L=200)
The components identified by shading andmark are critical for safety.Replace only with part number specified.
-
REPLACEMENT PARTS LIST
- 18 -
The components identified by shading andmark are critical for safety.Replace only with part number specified.
LOCA. NO PART NO DESCRIPTION
IC01
"
"
IC02
IC03
IC201
IC301
IC401
IC430
IC501
IC502
IC503
IC601
IC602
IC630
IC801
IC802
IC840
DB813
D01
D04
D101
D102
D301
D401
D406
D408
D410
D411
D413
D415
D416
D501
D502
D503
D504
D505
D506
D507
D508
D601
D602
D603
D650
D651
D801
D805
D806
D809
D810
0IGS873402C
0IGS873404B
0IGS873403A
0IAL240410A
0IKE704200B
0IGS381200A
0ISA783300A
0IKE781200C
0IKE780800A
0IPH836255B
0IPH466500B
0IPH839520A
0ISA428200A
0ISA797600A
0IPH842500A
0ITF435000A
0ISK570700A
0IKE780500K
0DD260000BB
0DD414809ED
0DD414809ED
0DD414809ED
0DD859009AA
0DD400509AA
0DD414809ED
0DD060009AC
0DD414809ED
0DD060009AC
0DD150009CA
0DD060009AC
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD859009AA
0DD859009AA
0DD120000BB
0DD060009AC
0DD560009AA
0DD100009AM
0DD100009AM
IC,LG8734-02C(GMS84524-TB010)*LANG.ENG+RUSIA
IC,LG8734-04B(GMS84524-TB008)*LANG.ENG ONLY
IC,LG8734-03A *LANG. ENG+MULTI
IC,AT24C04-10PC 8D EEPROM(4K,IIC)
IC,KIA7042P 3P 4.2V RESET
IC,GL3812(HA11518)
IC,LA7833 7SIP V/OUT 2.2A(P-P)
IC,KIA7812PI 3P(TO-220IS) 12V,1A
IC,KIA7808PI 3P(TO-220IS) 1A,8V
IC,TDA8362B/N5 52SD P/N/S 1CHIP
IC,TDA4665-V4 16D 1H D/L(TAIWAN)
IC,TDA8395P/N2 16D SECAM DETECT.
IC,LA4282
IC,LA7976 5PIN,SIP BK PAL SIF CON
IC,TDA8425 SOUND CONTROL
IC,4N35(G)V 6D PHOTO COUPLER
IC,STR/S5707(LF.953) 9P SMPS-CNTR
IC,KIA7805PI 3P(TO-220IS) 5V,1A
DIODE BRIDGE D2SBA60(STK) SHINDENKEN
DIODE DS4148
DIODE DS4148
DIODE DS4148
DIODE SILICON MA859 TAPING
DIODE 1N4005 GP
DIODE DS4148
DIODE TVR06J 0.6A/600V 250NS
DIODE DS4148
DIODE TVR06J 0.6A/600V 250NS
DIODE RGP15J
DIODE TVR06J 0.6A/600V 250NS
DIODE DS4148
DIODE DS4148
DIODE DS4148
DIODE DS4148
DIODE DS4148
DIODE DS4148
DIODE DS4148
DIODE DS4148
DIODE DS4148
DIODE DS4148
DIODE DS4148
DIODE DS4148
DIODE DS4148
DIODE SILICON MA859 TAPING
DIODE SILICON MA859 TAPING
DIODE FML-G12S
DIODE TVR06J 0.6A/600V 250NS
DIODE BYT56M TEMIC TP TEMIC
DIODE EU1ZV
DIODE EU1ZV
LOCA. NO PART NO DESCRIPTION
D811
D812
D813
D901
D902
D903
LD01
ZD01
ZD02
ZD03
ZD04
ZD401
ZD402
ZD404
ZD501
ZD551
ZD801
ZD810
Q01
Q02
Q101
Q102
Q103
Q180
Q181
Q182
Q201
Q202
Q301
Q302
Q303
Q304
Q401
Q402
Q503
Q504
Q505
Q506
Q508
Q509
Q510
Q511
Q512
Q513
Q514
Q515
Q516
Q517
Q518
Q601
Q652
Q653
0DD060009AC
0DD060009AC
0DD414809ED
0DD414809ED
0DD414809ED
0DD414809ED
0DD000000BA
0DZ750009AA
0DZ750009AA
0DZ750009AA
0DZ910009BA
0DZ910009BA
0DZ510009AB
0DZ330009BA
0DZ820009AA
0DZ510009AB
0DZ820009AA
0DZ750009AA
0TR126609AA
0TR319809AA
0TR319809AB
0TR319709AB
0TR319809AA
0TR126609AA
0TR126609AA
0TR126609AA
0TR319809AA
0TR319809AA
0TR319809AA
0TR319809AA
0TR319809AA
0TR319809AA
0TR102609AA
0TR249900AA
0TR126609AA
0TR319809AA
0TR126609AA
0TR319809AA
0TR102009AB
0TR319809AB
0TR319809AB
0TR319809AB
0TR126609AA
0TR126609AA
0TR126609AA
0TR319809AA
0TR319809AA
0TR126609AA
0TR319809AA
0TR126609AA
0TR319809AA
0TR319809AA
DIODE TVR06J 0.6A/600V 250NS
DIODE TVR06J 0.6A/600V 250NS
DIODE DS4148
DIODE DS4148
DIODE DS4148
DIODE DS4148
DIODE LAMP(DIFFUSION TYPE)
DIODE ZENER MTZ7.5B
DIODE ZENER MTZ7.5B
DIODE ZENER MTZ7.5B
DIODE ZENER MTZ9.1B
DIODE ZENER MTZ9.1B
DIODE ZENER MTZ5.1B
DIODE ZENER HZT33
DIODE ZENER MTZ8.2B
DIODE ZENER MTZ5.1B
DIODE ZENER MTZ8.2B
DIODE ZENER MTZ7.5B
TRANSISTOR KTA1266-TP-Y (KTA1015)
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KTC3198-TP-GR (KTC1815)
TRANSISTOR KTC3197,TP(KTC388A)
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KTA1266-TP-Y (KTA1015)
TRANSISTOR KTA1266-TP-Y (KTA1015)
TRANSISTOR KTA1266-TP-Y (KTA1015)
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KTC1026-Y TP(KTC2230A)
TRANSISTOR KTD2499 TO-3P(H)IS
TRANSISTOR KTA1266-TP-Y (KTA1015)
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KTA1266-TP-Y (KTA1015)
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KRC102M,TP(KRC1202)
TRANSISTOR KTC3198-TP-GR (KTC1815)
TRANSISTOR KTC3198-TP-GR (KTC1815)
TRANSISTOR KTC3198-TP-GR (KTC1815)
TRANSISTOR KTA1266-TP-Y (KTA1015)
TRANSISTOR KTA1266-TP-Y (KTA1015)
TRANSISTOR KTA1266-TP-Y (KTA1015)
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KTA1266-TP-Y (KTA1015)
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KTA1266-TP-Y (KTA1015)
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KTC3198-TP-Y (KTC1815)
ICs
DIODES
TRANSISTORS
-
- 19 -
LOCA. NO PART NO DESCRIPTION
Q654
Q802
Q803
Q804
Q810
Q901
Q902
Q903
C01
C02
C03
C04
C05
C06
C08
C09
C10
C103
C11
C110
C111
C112
C113
C12
C13
C16
C17
C181
C182
C183
C184
C185
C186
C187
C188
C189
C20
C203
C21
C211
C212
C213
C214
C215
C216
C217
C219
C22
C220
C221
0TR319809AA
0TR320209AA
0TR102009AB
0TR102009AB
0TR102609AA
0TR322900AA
0TR322900AA
0TR322900AA
0CN1030F679
0CN4710K519
0CN3910K519
0CQ1041N509
0CN1010K519
0CN2710K519
0CC2400K415
0CC2400K415
0CC1300K415
0CQ1041N509
0CC1000K115
0CE226DF618
0CN1030F679
0CN1030F679
0CN1030F679
0CN1030F679
0CE106DF618
0CN1030F679
0CQ1041N509
0CE475DK618
0CE475DK618
0CQ1041N509
0CQ1041N509
0CE475DK618
0CE475DK618
0CE337DF618
0CE107DF618
0CN1030F679
0CN2210K519
0CE107DF618
0CN1010K519
0CE106DF618
0CE105DK618
0CE105DK618
0CE105DK618
0CE105DK618
0CE105DK618
0CE105DK618
0CE476DF618
0CN1010K519
0CE106DF618
0CE107DF618
TRANSISTOR KTC3198-TP-Y (KTC1815)
TRANSISTOR KTC3202-TP-Y (KTC1959)
TRANSISTOR KRC102M,TP(KRC1202)
TRANSISTOR KRC102M,TP(KRC1202)
TRANSISTOR KTC1026-Y TP(KTC2230A)
TRANSISTOR KTC3229 (KTC2068)
TRANSISTOR KTC3229 (KTC2068)
TRANSISTOR KTC3229 (KTC2068)
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,TUBULA(HIGH DIELE) 470PF 50V K
C,TUBULA(HIGH DIELE) 390P 50V K
C,POLYESTER(MYLAR) 0.1MF 100V L
C,TUBULA(HIGH DIELE) 100PF 50V K
C,TUBULA(HIGH DIELE) 270PF 50V K
C,CERAMIC(TEMP COMP) 24P 50V J
C,CERAMIC(TEMP COMP) 24P 50V J
C,CERAMIC(TEMP COMP) 13P 50V J
C,POLYESTER(MYLAR) 0.1MF 100V L
C,CERAMIC(TEMP COMP) 10PF 50V D
C,ELECTROLYTIC 22UF STD 16V M
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,ELECTROLYTIC 10UF STD 16V M
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,POLYESTER(MYLAR) 0.1MF 100V L
C,ELECTROLYTIC 4.7UF STD 50V M
C,ELECTROLYTIC 4.7UF STD 50V M
C,POLYESTER(MYLAR) 0.1MF 100V L
C,POLYESTER(MYLAR) 0.1MF 100V L
C,ELECTROLYTIC 4.7UF STD 50V M
C,ELECTROLYTIC 4.7UF STD 50V M
C,ELECTROLYTIC 330UF STD 16V M
C,ELECTROLYTIC 100UF STD 16V M
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,TUBULA(HIGH DIELE) 220PF 50V K
C,ELECTROLYTIC 100UF STD 16V M
C,TUBULA(HIGH DIELE) 100PF 50V K
C,ELECTROLYTIC 10UF STD 16V M
C,ELECTROLYTIC 1UF STD 50V M
C,ELECTROLYTIC 1UF STD 50V M
C,ELECTROLYTIC 1UF STD 50V M
C,ELECTROLYTIC 1UF STD 50V M
C,ELECTROLYTIC 1UF STD 50V M
C,ELECTROLYTIC 1UF STD 50V M
C,ELECTROLYTIC 47UF STD 16V M
C,TUBULA(HIGH DIELE) 100PF 50V K
C,ELECTROLYTIC 10UF STD 16V M
C,ELECTROLYTIC 100UF STD 16V M
LOCA. NO PART NO DESCRIPTION
C222
C223
C224
C225
C227
C228
C229
C23
C230
C231
C24
C25
C26
C27
C301
C303
C304
C305
C306
C307
C308
C309
C310
C311
C312
C314
C402(20'')
''(21'')
C403
C404
C407
C408
C409
C411
C412
C413
C414
C416
C418
C419
C420(20'')
''(21'')
C421
C422
C423
C430
C501
C502
C507
C508
C509
C510
0CN1030F679
0CE106DF618
0CE107DF618
0CN1030F679
0CQ1031N509
0CE106DF618
0CE106DF618
0CN1010K519
0CQ2231N509
0CQ2231N509
0CN1020K519
0CN1020K519
0CN1510K519
0CN1510K519
0CN3310K519
0CC5600K415
0CQ1021N509
0CE227DJ618
0CQ6831N509
0CE477DJ618
181-027C
0CE105DK618
0CQ1041N509
0CE476DF618
0CQ1041N509
0CE108DH618
0CQ1031N509
0CQ5621N509
0CE227DF618
0CE225DK618
0CE475BP618
0CE105DP618
0CQ2231N509
0CK4710W515
0CE477DJ618
0CK4710W515
0CE337DH618
0CE475DK618
0CE1061R618
0CK4710W515
181-013B
181-013E
181-015J
181-009V
0CK8210W515
0CE227DD618
0CQ3921N409
0CX1000K409
0CN1040K949
0CN2230H949
0CE107DF618
0CQ1041N509
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,ELECTROLYTIC 10UF STD 16V M
C,ELECTROLYTIC 100UF STD 16V M
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,POLYESTER(MYLAR) 0.01U 100V K
C,ELECTROLYTIC 10UF STD 16V M
C,ELECTROLYTIC 10UF STD 16V M
C,TUBULA(HIGH DIELE) 100PF 50V K
C,POLYESTER(MYLAR) 0.022MF 100V K
C,POLYESTER(MYLAR) 0.022MF 100V K
C,TUBULA(HIGH DIELE) 1000PF 50V K
C,TUBULA(HIGH DIELE) 1000PF 50V K
C,TUBULA(HIGH DIELE) 150P 50V K
C,TUBULA(HIGH DIELE) 150P 50V K
C,TUBULA(HIGH DIELE) 330P 50V K
C,CERAMIC(TEMP COMP) 56P 50V J
C,POLYESTER(MYLAR) 0.001U 100V K
C,ELECTROLYTIC 220UF STD 35V M
C,POLYESTER(MYLAR) 0.068U 100V K
C,ELECTROLYTIC 470UF STD 35V M
C,TANTAL 25V 1.0UFK
C,ELECTROLYTIC 1UF STD 50V M
C,POLYESTER(MYLAR) 0.1MF 100V L
C,ELECTROLYTIC 47UF STD 16V M
C,POLYESTER(MYLAR) 0.1MF 100V L
C,ELECTROLYTIC 1000UF STD 25V M
C,POLYESTER(MYLAR) 0.01U 100V K
C,POLYESTER(MYLAR) 0.0056U 100V K
C,ELECTROLYTIC 220UF STD 16V M
C,ELECTROLYTIC 2.2UF STD 50V M
C,ELECTROLYTIC 4.7U KME(RG) 160V
C,ELECTROLYTIC 1UF STD 160V M
C,POLYESTER(MYLAR) 0.022MF 100V K
C,CERAMIC(HIGH DIELE) 470PF 500V K
C,ELECTROLYTIC 470UF STD 35V M
C,CERAMIC(HIGH DIELE) 470PF 500V K
C,ELECTROLYTIC 330UF STD 25V M
C,ELECTROLYTIC 4.7UF STD 50V M
C,ELECTROLYTIC 10M SM 250V M
C,CERAMIC(HIGH DIELE) 470PF 500V K
CAPACITOR MPP 200V 0.36uF J
CAPACITOR MPP 200V 0.47uF J
C,MPP 1600V 0.0086uF H
CAPACITOR PP 200V 0.047UF K
C,CERAMIC(HIGH DIELE) 820PF 500V K
C,ELECTROLYTIC 220UF STD 10V M
C,POLYESTER(MYLAR) 0.0039U 100V J
C,TUBULA(T.C) 10P 50V J
C,TUBULA(HIGH DIELE) 0.1M 50V Z
C,TUBULA(HIGH DIELE) 22000P 25V Z F
C,ELECTROLYTIC 100UF STD 16V M
C,POLYESTER(MYLAR) 0.1MF 100V L
CAPACITORS
-
- 20 -
The components identified by shading andmark are critical for safety.Replace only with part number specified.
LOCA. NO PART NO DESCRIPTION
C511
C512
C513
C514
C515
C516
C517
C518
C519
C520
C521
C522
C523
C524
C525
C526
C527
C528
C529
C530
C531
C532
C533
C534
C535
C536
C537
C538
C539
C551
C552
C553
C554
C555
C556
C557
C561
C562
C563
C564
C565
C566
C601
C602
C603
C604
C605
C606
C607
C608
C609
C610
0CQ1041N509
0CE476DF618
0CQ1041N509
0CE476DF618
0CQ1041N509
0CQ1041N509
0CQ1042K439
0CE476DF618
0CE336DF618
0CE226DF618
0CQ4721N509
0CQ1041N509
0CC1300K415
0CC1800K415
0CN2230H949
0CE476DF618
0CQ4721N509
0CE105DK618
0CQ4721N509
0CQ1041N509
0CN1030F679
0CQ2231N509
181-0322
0CQ1041N509
0CE106DF618
0CE106DF618
0CN2230H949
0CE225DK618
0CQ3321N509
0CE476DF618
0CN2230H949
0CQ1041N509
0CQ1041N509
0CQ1021N509
0CQ1021N509
0CN2230H949
0CE476DF618
0CQ2231N509
0CQ1041N509
0CQ2242K439
0CN1030F679
0CN1030F679
0CE477DJ618
0CQ1042K439
0CE108DK61A
0CQ1042K439
0CE477DJ618
0CE225DK618
0CQ1042K439
0CE107DH618
0CE106DF618
0CQ3931N509
C,POLYESTER(MYLAR) 0.1MF 100V L
C,ELECTROLYTIC 47UF STD 16V M
C,POLYESTER(MYLAR) 0.1MF 100V L
C,ELECTROLYTIC 47UF STD 16V M
C,POLYESTER(MYLAR) 0.1MF 100V L
C,POLYESTER(MYLAR) 0.1MF 100V L
C,POLYESTER(MYLAR) 0.1UF S 50V J
C,ELECTROLYTIC 47UF STD 16V M
C,ELECTROLYTIC 33UF STD 16V M
C,ELECTROLYTIC 22UF STD 16V M
C,POLYESTER(MYLAR) 0.0047U 100V K
C,POLYESTER(MYLAR) 0.1MF 100V L
C,CERAMIC(TEMP COMP) 13P 50V J
C,CERAMIC(TEMP COMP) 18P 50V J
C,TUBULA(HIGH DIELE) 22000P 25V Z F
C,ELECTROLYTIC 47UF STD 16V M
C,POLYESTER(MYLAR) 0.0047U 100V K
C,ELECTROLYTIC 1UF STD 50V M
C,POLYESTER(MYLAR) 0.0047U 100V K
C,POLYESTER(MYLAR) 0.1MF 100V L
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,POLYESTER(MYLAR) 0.022MF 100V K
C,TANTAL 2.2MF 25V K
C,POLYESTER(MYLAR) 0.1MF 100V L
C,ELECTROLYTIC 10UF STD 16V M
C,ELECTROLYTIC 10UF STD 16V M
C,TUBULA(HIGH DIELE) 22000P 25V Z F
C,ELECTROLYTIC 2.2UF STD 50V M
C,POLYESTER(MYLAR) 0.0033U 100V K
C,ELECTROLYTIC 47UF STD 16V M
C,TUBULA(HIGH DIELE) 22000P 25V Z F
C,POLYESTER(MYLAR) 0.1MF 100V L
C,POLYESTER(MYLAR) 0.1MF 100V L
C,POLYESTER(MYLAR) 0.001U 100V K
C,POLYESTER(MYLAR) 0.001U 100V K
C,TUBULA(HIGH DIELE) 22000P 25V Z F
C,ELECTROLYTIC 47UF STD 16V M
C,POLYESTER(MYLAR) 0.022MF 100V K
C,POLYESTER(MYLAR) 0.1MF 100V L
C,POLYESTER(MYLAR) 0.22UF S 50V J
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,ELECTROLYTIC 470UF STD 35V M
C,POLYESTER(MYLAR) 0.1UF S 50V J
C,ELECTROLYTIC 1000UF STD 50V M
C,POLYESTER(MYLAR) 0.1UF S 50V J
C,ELECTROLYTIC 470UF STD 35V M
C,ELECTROLYTIC 2.2UF STD 50V M
C,POLYESTER(MYLAR) 0.1UF S 50V J
C,ELECTROLYTIC 100UF STD 25V M
C,ELECTROLYTIC 10UF STD 16V M
C,POLYESTER(MYLAR) 0.039UF 100V K
LOCA. NO PART NO DESCRIPTION
C611
C612
C613
C614
C616
C630
C631
C632
C633
C634
C635
C636
C637
C638
C639
C640
C641
C642
C651
C652
C653
C658
C659
C660
C661
C662
C663
C664
C665
C667
C804
C805
C810
C811
C812
C813
C814
C817
C818
C819
C820
C822
C823
C824
C825
C826
C827
C828
C829
C830
C831
C832
0CE107DH618
0CQ3931N509
0CE106DF618
0CE107DH618
0CE227DF618
0CQ4742K439
0CE107DF618
0CQ4742K439
0CN1030F679
0CE107DF618
0CQ3331N509
0CQ5621N509
0CE226DF618
0CE226DF618
0CQ5621N509
0CQ3331N509
0CQ1531N509
0CQ1531N509
0CE476DF618
0CN1030F679
0CN1030F679
0CN1020K519
0CX4700K409
0CN1030F679
0CN1510K519
0CX4700K409
0CX3300K409
0CN1030F679
0CX5600K409
0CX4700K409
0CK4710W515
0CE477DK618
181-120E
0CE475DK618
0CK4710W515
181-091C
0CE227BP650
181-001W
181-091G
0CK4710W515
0CE227DJ618
181-506B
0CN1020K519
0CE475DK618
0CE227DJ618
181-120E
0CE1071P650
181-506B
0CK4710W515
0CE108DF618
0CE107DF618
181-091D
C,ELECTROLYTIC 100UF STD 25V M
C,POLYESTER(MYLAR) 0.039UF 100V K
C,ELECTROLYTIC 10UF STD 16V M
C,ELECTROLYTIC 100UF STD 25V M
C,ELECTROLYTIC 220UF STD 16V M
C,POLYESTER(MYLAR) 0.47UF S 50V J
C,ELECTROLYTIC 100UF STD 16V M
C,POLYESTER(MYLAR) 0.47UF S 50V J
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,ELECTROLYTIC 100UF STD 16V M
C,POLYESTER(MYLAR) 0.033U 100V K
C,POLYESTER(MYLAR) 5600PF 100V K
C,ELECTROLYTIC 22UF STD 16V M
C,ELECTROLYTIC 22UF STD 16V M
C,POLYESTER(MYLAR) 5600PF 100V K
C,POLYESTER(MYLAR) 0.033U 100V K
C,POLYESTER(MYLAR) 0.015MF 100V K
C,POLYESTER(MYLAR) 0.015MF 100V K
C,ELECTROLYTIC 47UF STD 16V M
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,TUBULA(HIGH DIELE) 1000PF 50V K
C,TUBULA(T.C) 47PF 50V J
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,TUBULA(HIGH DIELE) 150P 50V K
C,TUBULA(T.C) 47PF 50V J
C,TUBULA(T.C) 33PF 50V J
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,TUBULA(T.C) 56P 50V J
C,TUBULA(T.C) 47PF 50V J
C,CERAMIC(HIGH DIELE) 470PF 500V K
C,ELECTROLYTIC 470UF STD 50V M
C,ACT 4KV E 222M FL10
C,ELECTROLYTIC 4.7UF STD 50V M
C,CERAMIC(HIGH DIELE) 470PF 500V K
C,DE0705 R 471K 1KV
C,ELECTROLYTIC 220U KME 160V M
C,AL.ELECTROLYTIC CE 450V 220UF M
C,DE0907 R471K 2K
C,CERAMIC(HIGH DIELE) 470PF 500V K
C,ELECTROLYTIC 220UF STD 35V M
C,ECQ U 2A154MVZ
C,TUBULA(HIGH DIELE) 1000PF 50V K
C,ELECTROLYTIC 4.7UF STD 50V M
C,ELECTROLYTIC 220UF STD 35V M
C,ACT 4KV E 222M FL10
C,ELECTROLYTIC 100M SM 160V M
C,ECQ U 2A154MVZ
C,CERAMIC(HIGH DIELE) 470PF 500V K
C,ELECTROLYTIC 1000UF STD 16V M
C,ELECTROLYTIC 100UF STD 16V M
C,DE0905 R 102K 1KV
-
- 21 -
The components identified by shading andmark are critical for safety.Replace only with part number specified.
LOCA. NO PART NO DESCRIPTION
C833
C834
C835
C840
C841
C842
C901
C902
C903
C904
C905
C906
L01
L02
L103
L181
L301
L401
L402
L403
L501
L503
L504
L651
L652
L653
L654
L801
L802
L803
L804
L805
L901
T402
T801
T802(20'')
''(21'')
VL501
FR421
FR422
FR423
FR424
FR804
FR812
J75
R05
R06
R07
181-091D
0CK10201515
0CK10201515
0CE477DD618
0CN1030F679
181-091B
0CN3310K519
0CN2710K519
0CN3310K519
0CE476DF618
181-033S
0CN1810K519
0LA0392K119
0LA0222K119
150-C01D
0LA0331K119
125-022K
125-022K
150-L02C
125-022K
0LA1000K119
0LA0561K119
0LA0331K119
0LA0272K119
0LA0182K119
0LA0681K119
0LA0122K119
125-123A
150-C02F
125-022K
125-123A
125-022K
150-C02A
151-C02B
150-F06J
151-B05K
151-B05L
150-E16C
0RF0101J607
0RF0470J607
180-D02H
0RF0470H609
180-D02C
0RF0470H609
0RD1000F609
0RD1300F609
0RD1001F609
0RD3300F609
C,DE0905 R 102K 1KV
C,CERAMIC(HIGH DIELE) 1000P 1KV K
C,CERAMIC(HIGH DIELE) 1000P 1KV K
C,ELECTROLYTIC 470UF STD 10V M
C,TUBULA(HIGH DIELE) 0.01MF 16V M
C,DE5105 270MF1KV J
C,TUBULA(HIGH DIELE) 330P 50V K
C,TUBULA(HIGH DIELE) 270PF 50V K
C,TUBULA(HIGH DIELE) 330P 50V K
C,ELECTROLYTIC 47UF STD 16V M
CAPACITOR 2KV B 122K TP7.5
C,TUBULA(HIGH DIELE) 180PF 50V K
INDUCTOR 39UH K
INDUCTOR 22UH K
COIL,CHOKE 0.55UH A 1105
INDUCTOR 3.3UH K 2.3*3.4 TP
CORE,FERRITE 1UH
CORE,FERRITE 1UH
COIL,H-LINEARITY 170UH
CORE,FERRITE 1UH
INDUCTOR 100UH K
INDUCTOR 5.6UH K
INDUCTOR 3.3UH K 2.3*3.4 TP
INDUCTOR 27UH K
INDUCTOR 18UH K
INDUCTOR 6.8UH K
INDUCTOR 12UH K
CORE,FERRITE BFD3565R2F
COIL,CHOKE 82UH R1217
CORE,FERRITE 1UH
CORE,FERRITE BFD3565R2F
CORE,FERRITE 1UH
COIL,CHOKE 10UH R0814
TRANSFORMER,H-DRIVE,EI-19,BULK
COIL,LINE FILTER SQE2930 18MH
TRANSFORMER,SMPS EER4220 STR-S5707 W
TRANSFORMER,SMPS EER4220 STR-S5707 W
COIL,VAR,07S 1B 38.9MHZ
R,FUSIBLE 1 1W 5%
R,FUSIBLE 0.47 1W 5%
R,RNF RND(S) CR 2W 1.4 J
R,FUSIBLE 0.47 1/2W 5
R,RNF RND(S) EQ 2W 0.47 J
R,FUSIBLE 0.47 1/2W 5
R,CARBON FILM 100 1/6W 5
R,CARBON FILM 130 1/6W 5
R,CARBON FILM 1.0K 1/6W 5
R,CARBON FILM 330 1/6W 5
LOCA. NO PART NO DESCRIPTION
R08
R103
R105
R106
R107
R108
R11
R110
R112
R113
R114
R116
"
R117
R118
"
R119
R12
R120
R121
R13
R14
R15
R16
R17
R18
R180
R181
R182
R183
R184
R185
R186
R187
"
R188
R19
R20
R201
R202
R203
"
R204
R205
R21
R212
R216
R217
R218
R219
R22
R224
R225
R226
0RD7500F609
0RD1002F609
0RD2402F609
0RD1003F609
0RD3302F609
0RD3302F609
0RD5601F609
0RD1000F609
0RD2200F609
0RD5101F609
0RD6800F609
0RD0682F609
0RD1200F609
0RD1001F609
0RD0562F609
0RD0392F609
0RD6801F609
0RD1001F609
0RD2201F609
0RD2201F609
0RD1601F609
0RD1201F609
0RD2001F609
0RD3901F609
0RD1001F609
0RD2201F609
0RD4702F609
0RD4702F609
0RD4702F609
0RD3302F609
0RD9102F609
0RD1003F609
0RD1002F609
0RD1802F609
0RD2402F609
0RD1202F609
0RD6802F609
0RD8201F609
0RD0752F609
0RD3300F609
0RD7500F609
0RD2000F609
0RD1000F609
0RD0822F609
0RD1002F609
0RD2202F609
0RD1500F609
0RD1500F609
0RD5102F609
0RD5102F609
0RD1502F609
0RD3301F609
0RD1001F609
0RD2203F609
R,CARBON FILM 750 1/6W 5
R,CARBON FILM 10K 1/6W 5
R,CARBON FILM 24K 1/6W 5
R,CARBON FILM 100K 1/6W 5
R,CARBON FILM 33K 1/6W 5
R,CARBON FILM 33K 1/6W 5
R,CARBON FILM 5.6K 1/6W 5
R,CARBON FILM 100 1/6W 5
R,CARBON FILM 220 1/6W 5
R,CARBON FILM 5.1K 1/6W 5
R,CARBON FILM 680 1/6W 5
R,CARBON FILM 68 1/6W 5
R,CARBON FILM 120 1/6W 5 *HYPER TUNER
R,CARBON FILM 1.0K 1/6W 5
R,CARBON FILM 56 1/6W 5
R,CARBON FILM 39 1/6W 5 *HYPER TUNER
R,CARBON FILM 6.8K 1/6W 5
R,CARBON FILM 1.0K 1/6W 5
R,CARBON FILM 2.2K 1/6W 5
R,CARBON FILM 2.2K 1/6W 5
R,CARBON FILM 1.6K 1/6W 5
R,CARBON FILM 1.2K 1/6W 5
R,CARBON FILM 2.0K 1/6W 5
R,CARBON FILM 3.9K 1/6W 5
R,CARBON FILM 1.0K 1/6W 5
R,CARBON FILM 2.2K 1/6W 5
R,CARBON FILM 47K 1/6W 5
R,CARBON FILM 47K 1/6W 5
R,CARBON FILM 47K 1/6W 5
R,CARBON FILM 33K 1/6W 5
R,CARBON FILM 91K 1/6W 5
R,CARBON FILM 100K 1/6W 5
R,CARBON FILM 10K 1/6W 5
R,CARBON FILM 18K 1/6W 5
R,CARBON FILM 24K 1/6W 5 *HYPER TUNER
R,CARBON FILM 12K 1/6W 5
R,CARBON FILM 68K 1/6W 5 *SCART
R,CARBON FILM 8.2K 1/6W 5
R,CARBON FILM 75 1/6W 5
R,CARBON FILM 330 1/6W 5 *A/V JACK
R,CARBON FILM 750 1/6W 5 *A/V JACK
R,CARBON FILM 200 1/6W 5 *SCART
R,CARBON FILM 100 1/6W 5 *SCART
R,CARBON FILM 82 1/6W 5
R,CARBON FILM 10K 1/6W 5
R,CARBON FILM 22K 1/6W 5
R,CARBON FILM 150 1/6W 5
R,CARBON FILM 150 1/6W 5
R,CARBON FILM 51K 1/6W 5
R,CARBON FILM 51K 1/6W 5
R,CARBON FILM 15K 1/6W 5
R,CARBON FILM 3.3K 1/6W 5
R,CARBON FILM 1.0K 1/6W 5
R,CARBON FILM 220K 1/6W 5
COILS & TRANSFORMERS
RESISTORS
-
- 22 -
The components identified by shading andmark are critical for safety.Replace only with part number specified.
LOCA. NO PART NO DESCRIPTION
R227
R229
R230
R231
R232
R234
R235
R236
R236
R237
R238
R238
R239
R240
R241
R242
R243
R26
R27
R28
R29
R30
R301
R302
R303(20'')
''(21'')
R304(20'')
''(21'')
R305
R306
R307
R308
R309
R31
R310
R311
R312
R313
R314
R315
R316
R317
R318
R32
R33
R34
R36
R39
R40
R41
R410
R411
R412
0RD2203F609
0RD1002F609
0RD0681F609
0RD1001F609
0RD1001F609
0RD0271F609
0RD0271F609
0RD2001F609
0RD2203F609
0RD2001F609
0RD2203F609
0RD5102F609
0RD5102F609
0RD0752F609
0RD2401F609
0RD5102F609
0RD5102F609
0RD1801F609
0RD4701F609
0RD1002F609
0RD6802F609
0RD1001F609
0RD6200F609
0RD8200H609
0RD1203F609
0RD9102F609
0RD3000F609
0RD3600F609
0RD4700F609
0RD3002F609
0RD2402F609
0RN1001F409
0RD1202F609
0RD1201F609
0RS3300J607
0RN0221H609
0RD3902F609
0RD4702F609
0RD2002F609
0RD4701H609
0RD1002F609
0RD0471H609
0RD9101F609
0RD3002F609
0RD4702F609
0RD1002F609
0RD4701F609
0RD3301F609
0RD1002F609
0RD1001F609
0RD3903H609
180-B01W
0RD1202F609
R,CARBON FILM 220K 1/6W 5
R,CARBON FILM
top related