lecture 1: your boe-bot's servo motors

1

Lecture 1: Your Boe-Bot's Servo Lecture 1: Your Boe-Bot's Servo MotorsMotors

Presentation based on:

"Robotics with the Boe-Bot"By Andy LindsayParallax, Inc

Presentation developed by:Presentation developed by:

Martin A. HebelMartin A. HebelSouthern Illinois University CarbondaleSouthern Illinois University CarbondaleCollege of Applied Sciences and ArtsCollege of Applied Sciences and ArtsElectronic Systems TechnologiesElectronic Systems Technologies7/6/04

2

Continuous Rotation ServoContinuous Rotation ServoUsed to provide drive motion for the Bot.

Standard Servo: Used for positioning, such as with RC airplanes rudder and flaps.Continuous Rotation Servo: Rotate in a certain direction and speed.

3

Tracking TimeTracking Time

PAUSE is used to have the BASIC Stamp wait a short amount of time.PAUSE duration• Duration is in milliseconds (mS) or

1/1000th of a second, 1-65535

PAUSE 1000

4

5

Repeating ActionsRepeating Actions

A DO….LOOP is used to repeat a sequence of commands.DO

'Commands to performLOOP

6

Servo SignalsServo Signals

Servos are controlled with a high pulse lasting a short time, and repeated.

The PULSOUT instruction can be used to send a short pulse.PULSOUT Pin, Duration• Pin: Pin device is connected to.• Duration: Time in 2S (microsecond)

intervals, 1-65535. Microsecond = 1 millionth of a second.

PULSOUT 12, 1PULSOUT 13, 2

7

8

Servo SignalsServo Signals

Typical servos require a pulse of 1mS to 2mS to define the direction/position.

A 20mS pause be between each pulse.

What values of PULSOUT are in the valid range?

9

Connecting the ServosConnecting the Servos

10

11

Centering the ServosCentering the Servos

The pulse width defines the direction and speed of the servo motor.• 1000 – Maximum speed one direction• 750 – Stopped• 500 – Maximum speed other direction

Use the servo center programs to ensure it is stopped at 750.

12

13

Storing and Counting ValuesStoring and Counting Values

Variable are used to store valuesVariables much be declared prior to

being used. Declaring a variable is giving it a name, and a size to hold.VariableName var Size

14

DEBUG ? is short hand to display the value of a variable or pin.

15

Counting and Controlling Counting and Controlling RepetitionsRepetitionsFOR…NEXT loops can be used to

control the number of repetitions a segment of code takes.

FOR StartValue TO EndValue {STEP StepValue}…NEXT

16

What will this code do?What will this code do?

Freq VAR Word

DO FOR Freq = 1000 to 5000 Step 100

DEBUG ? Freq FREQOUT 4, 100, Freq

TOGGLE 12 TOGGLE 13NEXT

LOOP

17

Testing ServosTesting Servos

To control the servo, send a series of pulses with values between 500 to 1000 (1-2mS)

Changing the value will change the direction and speed to some extent.

18

FOR…NEXT to Control Servo Run FOR…NEXT to Control Servo Run TimeTimeThe FOR…NEXT Loop can be used to

control how long to drive a servo.

19

20

ReviewReview

21