lathes catalog - grainger.com · spindle taper mt 1 spindle bore 7/16" number of spindle...
Post on 30-Jul-2018
274 Views
Preview:
TRANSCRIPT
FIND solutions. COMPARE products. ENJOY great prices.
2
Item #53UH15
Motor 5/8HP - 115V - 1PH - 60Hz
Swing Over Bed 5-1/2"
Distance Between Centers 9-3/4"
Spindle Taper MT 1
Spindle Bore 7/16"
Number of Spindle Speeds Variable
Spindle Speed 160 - 4000 RPM
Bed Width 2-3/4"
Cross Travel 2-1/4"
Compound Travel 1-1/4
Carriage Travel 11
Tailstock Taper MT 1
Tailstock Travel 1-1/16"
Thread Range (mm) 8 - 44
Thread Range (in) 13/32" x 5/16"
Longitudinal Feed Rates 0.05" to 0.1"
Overall Length 22"
Overall Width 13"
Overall Height 11-1/2"
*Shown on optional 48WE83 floor stand
6" X 9" BENCH LATHEDayton's 6" bench model variable speed lathe delivers precision and versatility to handle the full range of turning operations. Heavy cast construction, smooth power transmission with all hardened steel gears,hardened and ground ways all desgined to give you years of trouble-free, precise turning.
The bench lathe is the right choice for turning small metal parts and is used in proto type shops, home machinists, and jewelry manfacturing.
STANDARD FEATURES:■■ Variable speed with DC motor delivers full torque at all speeds
■■ Change gear kit for threading ■■ Chip guards for the chuck and tool rest■■ Precision machined slide■■ Double tool holder■■ All guides adjustable via V-Ways■■ Adjustable tail stock■■ Right and Left spindle rotation switch■■ Emergency stop switch
LATHE COMES STANDARD WITH:■■ 3 jaw lathe chuck■■ Center
■■ Chip trap
OPTIONAL ACCESSORIES: Item # 48WE83 - Steel floor stand
FIND solutions. COMPARE products. ENJOY great prices.
3
*Shown on optional 53UH25 floor stand
9" X 20" BENCH LATHEDayton’s 9˝ bench engine lathe delivers the precision, power and versatility to handle a wide range of turning operations normally found in much larger machines.
Heavy cast iron construction, smooth power transmission, precision thrust and ball bearings in the head stock and spindle, hardened and ground ways all designed to give you years of trouble-free, precise turning. Built and inspected to the DIN 8606 toolmakers’ precision lathe standard, assuring accuracy and consistent performance.
The bench lathe is the right choice for turning small metal parts and is used in prototype shops, tool rooms, fabrication shops, maintenance shops, jewelry manufacturing and by home and hobby machinists.
■■ Machine tool spindle ■■ Dual P5 taper roller bearings on spindle■■ Prismatic bed of solid aged cast iron –
hardened to HRO 42-52 for long life■■ Fast easy feed speed and direction
changes with front mounted selector handles
■■ Feed gear box is constructed of steel gears running in an oil bath
■■ Feed lead screw is supported and runs on two bearings
■■ Precision machined slide with adjustable hand wheels with 0.002˝ / 0.001˝ scales
■■ Tailstock with adjustable precision scale of 0.02 mm / 0.001˝
■■ 3 Jaw lathe chuck■■ 4 Way tool post■■ Safety lathe chuck and tool post guards■■ Centers■■ Chip tray and splash guard
DIMENSIONS: 49.21" L x 23" W x 18.70" H
OPTIONAL ACCESSORIES: Item # 53UH25 - Heavy duty steel floor stand with hinged doors for added storage
Item #48WE43
Motor 1 HP / 115 V / 60HZ / 1PHCenter Height 4.92 inDistance Between Centers 21.65 inTurning Diameter 9.84 in
Max Swing over Compound Slide 5.91 in
Bed Width 5.31 in
SpindleSpindle Speed 125 - 2000 RPMNumber of Steps 6Spindle Taper MT4Spindle Hole 1.02 inChuck Size 4.92 inSlideTop Slide Travel 2.76 inCompound Slide Travel 4.33 inTailstockTailstock Taper MT2Tailstock Sleeve Travel 2.56 inLongitudinal Feed 0.002 & 0.012 inPitch 56 - 8 inTool Holder Seat Height 0.5 inWeight 276 lbs.
©2017 W.W. Grainger, Inc. W-XXXXX
4 Call or visit your local branch or go to grainger.com/dayton for complete product line information.
8" X 12" BENCH LATHEDayton's 8” bench model engine lathe delivers the precision, power and versatility to handle a wide range of turning operations normally found in much larger machines. Heavy cast construction, smooth power transmission with helical gears, hardened and ground ways all designed to give you years of trouble-free, precise turning.
All Dayton lathes are built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance.
EACH LATHE COMES STANDARD WITH:■■ 3 jaw lathe chuck■■ Safety chuck and tool post guards■■ 4 way tool post■■ Centers■■ Chip tray■■ Precision thrust and ball bearings in the head stock
The bench lathe is the right choice for turning small metal parts and is used in proto type shops, home machinists, jewelry manufacturing, tool rooms, fabrication shops and maintenance shops.
OPTIONAL ACCESSORIES: Item # 48WE83 - Steel floor stand
Item #53UH16
Motor 7/8HP - 115V - 1PH - 60Hz
Swing Over Bed 8"
Distance Between Centers 12"
Spindle Taper MT 3
Spindle Bore 3/4"
Number of Spindle Speeds Variable
Spindle Speed 150 to 2500 RPM
Bed Width 3-15/16"
Cross Travel 4"
Compound Travel 2-1/4"
Carriage Travel 10-1/2"
Tailstock Taper MT 2
Tailstock Travel 2"
Thread Range (mm) 8 to 44
Thread Range (in) 13/32" x 5/16"
Longitudinal Feed Rates 0.004 to 0.008
Overall Length 33"
Overall Width 16-3/4"
Overall Height 14-1/4"
Change gear kit■■ For threading
■■ Easy and fast speed change via V-belts
■■ Taper roller bearings■■ Two pieces■■ P5 quality
Prismatic bed■■ Solid, aged prismatic bed
made of grey cast iron, matured at least six month■■ Inductively hardened
(HRC 42-52)■■ Precision ground
*Shown on optional 48WE83 floor stand
Slide■■ Precision machined
■■ Handwheels with adjustable precision scaling of 0.002 /
0.0004"■■ 4-way tool post holder
■■ ·All guides adjustable via V-ledges
Tailstock■■ Adjustable for taper
turning■■ Tailstock spindle
sleeve and handwheel with adjustable
precision scale of 0.02 mm / 0.0008"
Trapezoid spindles Taper roller bearings
©2017 W.W. Grainger, Inc. W-XXXXX
5 Call or visit your local branch or go to grainger.com/dayton for complete product line information.
COMBINATION 9" X 20" BENCH LATHE AND MILL Dayton's combination 9˝ bench engine lathe and gear head mill delivers the precision, power and versatility to handle a wide range of turning, milling and drilling operations normally found in much larger machines.
Heavy cast iron construction, smooth power transmission with precision thrust and ball bearings in the head stock and spindles, hardened and ground ways all designed to go give you years of trouble-free, precise turning, milling and hole making machining. Built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance.
The all gear drive transmission on the mill delivers full power at any speed driving the cutting tools at nearly 100% of available horsepower and torque. With such a wide range of versatility and features, this all-purpose combination lathe/mill is one of the most function manual machine centers that can operate in all types and sizes of shops.
ITEM #53UH18
Lathe Specifications
Lathe Motor1PH - 115V - 13.6 Amps - 1PH - 60 Hz
Height of Centers 4-3/4"
Max Turning Diameter 9-7/8"
Distance Between Centers 20"
Spindle
Spindle Speed 125 to 2000 RPM
Number of Speeds 6
Spindle Taper MT3
Spindle Hole 1"
Chuck Size 5"
Slide
Bed Width 5-7/8"
Travel Top Slide 19-1/2"
Compound Slide Travel 3-9/16"Distance Between Center and Compound Table
3"
4 Position Tool Post Height 3-3/4"
Tailstock
Tailstock Taper MT2
Tailstock Sleeve Travel 2-1/2"
Longitudial Feed0.003" 0.004" 0.006" 0.008 0.012" 0.016"
Pitch - (metric/inches) (TPI) 0.2 - 4 / 8 - 56
Dimensions / Weight
Height 33-1/2"
Length 49
Depth 23
Weight - Lathe 320
Weight - Combo 550 lb
Mill Specifications
Motor5/8HP - 115V - 10Amps -1PH - 60Hz
Drilling Capacity 5/8"
Miling Capacity of End Mill Cutter
3/4"
Milling Capacity of Insterted Tooth Cutter
2-1/2"
Working Radius 6-3/4"
Spindle
Spindle Holding Fixture MT2 3/8"-16 Draw Bar
Spindle Travel 2"
Drill - Mill Head
Swivel of the Milling Head + / - 90°
Gear Stages 2
Low Range 100 - 1500
High Range 200 - 3000
Z-Axis Travel 10-1/2"
Cross Table
Table Length 10"
Table Width 4-3/4"
Y-Axis Travel 4-21/64"
X-Axis Travel 3"
T-Slot Size/Distance/Qty 5/8"
Weight - Mill 227.08 lb
*Shown on optional 53UH25 floor stand
OPTIONAL ACCESSORIES: Item # 53UH25 - Steel floor stand
©2017 W.W. Grainger, Inc. W-XXXXX
6 Call or visit your local branch or go to grainger.com/dayton for complete product line information.
10" X 21" BENCH LATHE Dayton's 10” bench model engine lathes deliver the precision, power and versatility to handle a wide range of turning operations normally found in much larger machines.
Heavy cast construction, smooth power transmission with helical gears, hardened and ground ways all designed to give you years of trouble-free, precise turning. All Dayton lathes are built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance.
EACH LATHE COMES STANDARD WITH:■■ Safety chuck and tool post guards■■ Centers■■ Precision thrust and ball bearings in the head stock
■■ (3) Jaw Chuck■■ Splash Guard■■ 4-Way Tool Post■■ Lathe Chuck Guard■■ Tool Post Chip Guard■■ Steady Center MT2 and MT4■■ Change Gear Kit
The bench lathe is the right choice for turning small metal parts and is used in proto type shops, home machinists, jewelry manufacturing, tool rooms, fabrication shops and maintenance shops.
OPTIONAL ACCESSORIES: Item # 53UH25 - Steel floor stand
Item #53UH17
Motor 1HP - 115V - 1PH - 60Hz
Swing Over Bed 10"
Distance Between Centers 21-5/8"
Spindle Taper MT 4
Spindle Bore 1"
Number of Spindle Speeds 6
Spindle Speed 150 to 2400 RPM
Bed Width 3-1/2"
Cross Travel 4-3/4"
Compound Travel 2-3/4"
Carriage Travel 17"
Tailstock Taper MT 2
Tailstock Travel 2-1/2"
Thread Range (mm) 8 to 56
Thread Range (in.) 1/4" to 13/32"
Longitudinal Feed Rates 0.003 to 0.016
Overall Length 50"
Overall Width 23"
Overall Height 19"
Feed gear■■ Smooth running■■ Helical gears
■■ Running in an oil quench
Main spindle■■ Hardened and bedded in adjustable
precision taper roller bearings■■ Two taper roller bearings of P5 quality■■ Short taper, hardened spindle nose
with a spindle holder of 26 mm
*Shown on optional 53UH25 floor stand
Slide■■ 4 way tool post holder■■ All guides adjustable to zero clearance due to V-ledges■■ Rolled trapezoid spindles■■ Chip protection at the top slide
Tailstock■■ Adjustable by ± 5 mm / 0.197" for
taper turning■■ Tailstock spindle sleeve and
handwheel with adjustable precision scaling of 0.02 mm / 0.0008"
■■ Rapid and easy adjustment of the tailstock via clamping lever
©2017 W.W. Grainger, Inc. W-XXXXX
7 Call or visit your local branch or go to grainger.com/dayton for complete product line information.
COMBINATION 11" X 27" BENCH LATHE AND MILL Dayton’s combination 11˝ bench engine lathe and gear head mill delivers the precision, power and versatility to handle a wide range of turning, milling and drilling operations normally found in much larger machines.
Heavy cast iron construction, smooth power transmission with precision thrust and ball bearings in the head stock and spindles, hardened and ground ways all designed to go give you years of trouble-free, precise turning, milling and hole making machining. Built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance.
The all gear drive transmission on the mill delivers full power at any speed driving the cutting tools at nearly 100% of available horsepower and torque.
With such a wide range of versatility and features, this all-purpose combination lathe/mill is one of the most function manual machine centers that can operate in all types and sizes of shops.
Item # 48WE41
Lathe Specifications
Motor 1 HP / 115 V / 60HZ / 1PH
Center Height 5.51 in
Max Turning Diameter 11.02 in
Distance Between Centers 27.56 in
SpindleSpindle Speed 150 - 2000 RPM
Number of Steps 6
Spindle Taper MT4
Spindle Hole 1.02 in
Chuck Size 5 in
SlideBed Width 7.09 in
Top Slide Travel 2.43 in
Compound Slide Travel 5.60 in
Distance Between Center and Compound Table
3.49 in
TailstockTailstock Taper MT2
Tailstock Sleeve Travel 4.13 in
Longitudinal Feed .002-.004-.008 in
Pitch 8 - 56 in
Dimensions / WeightHeight 24.80 in
Length 54.72 in
Width 27.56 in
4 Position Tool Post Height 1/2 in.
Weight 440.93 lb
Mill Specifications
Motor 1 HP / 115 V / 60HZ / 1PH
Drilling Capacity 0.63 in
Milling Capacity of End-Mill Cutter 0.79 in
Milling Capacity of Inserted Tooth Cutter
2.48 in
Working Radius 7.28 in
SpindleSpindle Holding Fixture MT2/M10
Spindle Travel 1.97 in
Drill - Mill HeadSwivelling +/- 90°
Gear Stages 2
Low Range 100 to 1500 RPM
High Range 200 to 3000 RPM
Z-Axis Travel 14.57 in
Cross Table
Table Length 19.69 in
Table Width 7.09 in
Y-Axis Travel 6.89 in
X-Axis Travel 11.02 in
T-Slot Size / Distance / Quantity0.47 in / 2.48 in / 3
Dimensions / WeightHeight 33.85 in
Length 26.38 in
Width 21.65 in
Weight 227.08 lb
OPTIONAL ACCESSORIES: Item # 53UH25- Steel floor stand
*Shown on optional 53UH25 floor stand
©2017 W.W. Grainger, Inc. W-XXXXX
8 Call or visit your local branch or go to grainger.com/dayton for complete product line information.
12" X 36" ENGINE LATHE Dayton's 12” model engine lathe delivers the precision, power and versatility to handle a wide range of turning operations normally found in much larger machines.
Heavy cast construction, smooth power transmission with helical gears, hardened and ground ways all designed to give you years of trouble-free, precise turning.
All Dayton lathes are built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance.
LATHE COMES STANDARD WITH:■■ 3 & 4 Jaw Chucks■■ Splash Guards■■ Chuck and Tool Post Safety Guard■■ MT3 Dead Center■■ Inch & Metric Gears for Threading■■ Steady Rest■■ Follow Rest■■ Work Light
The bench lathe is the right choice for turning small metal parts and is used in proto type shops, home machinists, jewelry manufacturing, tool rooms, fabrication shops and maintenance shops.
Item #53UH10
Motor 2HP - 115/230V - 1PH - 60Hz
Swing Over Bed 12"
Distance Between Centers 36"
Spindle Taper MT 5
Spindle Bore 1-1/2"
Number of Spindle Speeds 18
Spindle Speed 650 - 1800 RPM
Bed Width 7-1/4"
Cross Travel 6-3/8"
Compound Travel 3-11/32"
Carriage Travel 31"
Tailstock Taper MT 3
Tailstock Travel 3-15/16"
Thread Range (In.) 4 - 56
Thread Range (mm) 0.4 - 7
Longitudinal Feed Rates 0.002 - 0.055
Overall Length 66"
Overall Width 30"
Overall Height 56"
Slide■■ Precisely machined■■ Top slide rotatable by 360°■■ Handwheels with adjustable precision scaling ■■ 4 position tool post holder■■ Right-/left-handed rotation at the slide
switchable via indexing spindle
Tailstock■■ Adjustable by +/- 10 mm / 0.393" for taper turning■■ Tailstock spindle sleeve and handwheel with
adjustable precision scale of 0.025 mm / 0.010"
Main spindle■■ Hardened and ground ■■ Running in a oil quench
■■ Run on 2 adjustable precision taper roller bearings
Main spindle gearwheels■■ Smooth running, hardened
and ground■■ Enclosed fast acting feed gear
Bed bridge■■ Removable gap
Glides■■ All guides adjustable
via V-ledges
Prismatic bed■■ Heavily ribbed ■■ Inductively hardened■■ Precision ground
©2017 W.W. Grainger, Inc. W-XXXXX
9 Call or visit your local branch or go to grainger.com/dayton for complete product line information.
13" X 40" ENGINE LATHE Dayton’s 13” engine lathes have the power to deal with heavy metal removal and the accuracy and control to handle precision fine tolerance turning.
Each machine comes standard with a DRO and glass scales for added operator convenience and accuracy. The headstock is designed to provide maximum power for roughing cuts and smooth, quiet power for fine finishing. All the gears are helical precision cut, hardened and ground running in a continual bath of oil. The main spindle is made of high alloy steel and mounted in precision taper roller bearings. The control panel is easy to use and is designed for operator convenience. The wide bed ways are made of stabilized cast iron, ground and hardened for a lifetime of use. The universal gear box delivers a broad range of feed and thread selections and each machine can do both inch and metric threads. All the gears are hardened and the shafts turn on anti-friction bearings.
All Dayton lathes are built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance.
These all purpose lathes are ideal for turning applications requiring heavy metal removal or fine tolerance finishing applications and are used in tool rooms, die and mold shops, fabrication shops and maintenance departments.
EACH LATHE COMES WITH:■■ Digital Readout■■ 3 & 4 Jaw Chucks■■ Splash Guards■■ Chuck and Toolpost Safety Guard■■ (2) MT3 Dead Centers■■ Inch and Metric Gears for Threading■■ Steady Rest■■ Follow Rest■■ Work Light
Item # 53UH11 53UH12
Motor 2HP - 115/230V - 1PH- 60Hz 2HP - 230/460V - 3PH - 60Hz
Swing Over Bed 13" 13"
Distance Between Centers 40" 40"
Spindle Taper MT 5 MT 5
Spindle Bore 1-1/2" 1-1/2"
Number of Spindle Speeds 8 8
Spindle Speed 70 - 2000 RPM 70 - 2000 RPM
Bed Width 7-3/8" 7-3/8"
Cross Travel 7" 7"
Compound Travel 3-3/4" 3-3/4"
Carriage Travel 37" 37"
Tailstock Taper MT 3 MT 3
Tailstock Travel 3-15/16" 3-15/16"
Thread Range (In.) 4 - 56 4 - 56
Thread Range (mm) 0.45 - 7.5 0.45 - 7.5
Longitudinal Feed Rates 0.003 - 0. 023 0.003 - 0. 023
Overall Length 76" 76"
Overall Width 30" 30"
Overall Height 58" 58"
Slide
■■ Precisely machined
■■ Top slide rotatable by 360°
■■ Handwheels with adjustable precision scaling of 0.04 / .02mm
/ 0.002" / 0.0008"
■■ 4 position tool post holder
■■ Chip protection at the top slide
Tailstock
■■ Adjustable by +/- 10 mm / 0.393" for taper turning
■■ Tailstock spindle sleeve and handwheel with adjustable
precision scale of 0.025 mm / 0.010"
Main spindle
■■ Running in a oil quench
Main spindle gearwheels
■■ Smooth running, hardened and ground
■■ Enclosed fast acting feed gear
Digital position display DPA 2000
■■ Glass scales
©2017 W.W. Grainger, Inc. W-XXXXX
10 Call or visit your local branch or go to grainger.com/dayton for complete product line information.
14" X 40" ENGINE LATHE The Ultimate in turning machines Dayton's 14” engine lathe has the power to deal with heavy metal removal and the accuracy and control to handle precision fine tolerance turning.
Each machine comes standard with a DRO and glass scales for added operator convenience and accuracy. The headstock is designed to provide maximum power for roughing cuts and smooth, quiet power for fine finishing. All the gears are helical precision cut, hardened and ground running in a continual bath of oil. The main spindle is made of high alloy steel and mounted in precision taper roller bearings. The control panel is easy to use and is designed for operator convenience. The wide bed ways are made of stabilized cast iron, ground and hardened for a lifetime of use. The universal gear box delivers a broad range of feed and thread selections and each machine can do both inch and metric threads. All the gears are hardened and the shafts turn on anti-friction bearings.
All Dayton lathes are built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance.
These all purpose lathes are ideal for turning applications requiring heavy metal removal or fine tolerance finishing applications and are used in tool rooms, die and mold shops, fabrication shops and maintenance departments.
EACH LATHE COMES WITH:■■ Digital Readout■■ 3 & 4 Jaw Chucks■■ Splash Guards■■ Chuck and 4- Way Toolpost Safety Guard
■■ (2) MT3 Dead Centers■■ Inch and Metric Gears for Threading
■■ Steady Rest■■ Follow Rest■■ Work Light
Item # 53UH13
Motor 2HP - 230V - 3PH - 60Hz
Swing Over Bed 14"
Distance Between Centers 40"
Spindle Taper MT 5
Spindle Bore 1-1/2"
Number of Spindle Speeds 16
Spindle Speed 45 - 1800 RPM
Bed Width 8"
Cross Travel 7"
Compound Travel 3-3/4"
Carriage Travel 37"
Tailstock Taper MT 3
Tailstock Travel 3-3/4"
Thread Range (In.) 4 - 112
Thread Range (mm) 0.45 - 7.5
Longitudinal Feed Rates 0.002 - 0.026
Overall Length 76"
Overall Width 30"
Overall Height 62"
Slide
■■ Precisely machined
■■ Top slide rotatable by 360°
■■ Handwheels with adjustable precision scaling of 0.04 / 0.02mm / 0.002" /
0.0008"
■■ 4 position tool post holder
■■ All guides adjustable via V-ledges
■■ Chip protection at the top slide
Main spindle
■■ Running in a oil quench
■■ Hardened and ground
■■ Running on 2 adjustable precision taper roller bearings
Main spindle gearwheels
■■ Smooth running, hardened and ground
■■ Enclosed fast acting feed gear
Digital position display DPA 2000
■■ Glass scales
Tailstock
■■ Adjustable for taper turning
■■ Tailstock spindle sleeve and handwheel with
adjustable precision scale of 0.025 mm / 0.010"
©2017 W.W. Grainger, Inc. W-XXXXX
11 Call or visit your local branch or go to grainger.com/dayton for complete product line information.
16" X 60" ENGINE LATHE The Ultimate in turning machines Dayton's 16” engine lathes has the power to deal with heavy metal removal and the accuracy and control to handle precision fine tolerance turning.
Each machine comes standard with a DRO and glass scales for added operator convenience and accuracy. The headstock is designed to provide maximum power for roughing cuts and smooth, quiet power for fine finishing. All the gears are helical precision cut, hardened and ground running in a continual bath of oil. The main spindle is made of high alloy steel and mounted in precision taper roller bearings. The control panel is easy to use and is designed for operator convenience. The wide bed ways are made of stabilized cast iron, ground and hardened for a lifetime of use. The universal gear box delivers a broad range of feed and thread selections and each machine can do both inch and metric threads. All the gears are hardened and the shafts turn on anti-friction bearings.
All Dayton lathes are built and inspected to the DIN 8606 toolmakers precision lathe standard assuring accuracy and consistent performance.
These all purpose lathes are ideal for turning applications requiring heavy metal removal or fine tolerance finishing applications and are used in tool rooms, die and mold shops, fabrication shops and maintenance departments.
EACH LATHE COMES STANDARD WITH:■■ Digital Readout■■ 3 & 4 Jaw Chucks■■ Splash Guards■■ Chuck and 4- Way Toolpost Safety Guard
■■ (2) MT3 Dead Centers■■ Inch and Metric Gears for Threading■■ Steady Rest■■ Follow Rest■■ Work Light
Item # 53UH14
Motor 6HP - 230V - 3PH - 60Hz
Swing Over Bed 16"
Distance Between Centers 60"
Spindle Taper MT6
Spindle Bore 2"
Number of Spindle Speeds 16
Spindle Speed 45 - 1800 RPM
Bed Width 9-7/8"
Cross Travel 9"
Compound Travel 5-1/2"
Carriage Travel 55"
Tailstock Taper MT 4
Tailstock Travel 4-3/4"
Thread Range (In.) 2 - 72
Thread Range (mm) 0.2 - 14
Longitudinal Feed Rates 0.002 - 0.067
Overall Length 97"
Overall Width 36"
Overall Height 53"
Slide
■■ Precisely machined
■■ Top slide rotatable by 360°
■■ Handwheels with adjustable precision scaling of 0.04 / 0.02mm / 0.002" / 0.0008"
■■ 4 position tool post holder
■■ All guides adjustable via V-ledges
■■ Chip protection at the top slide
Main spindle
■■ Running in a oil quench
■■ Hardened and ground
■■ Running on 2 adjustable precision taper roller bearings
Main spindle gearwheels
■■ Smooth running, hardened and ground
Digital position display DPA 2000
■■ Glass scales Tailstock
■■ Adjustable by +/- 10 mm / 0.393" for taper turning
■■ Tailstock spindle sleeve and handwheel with adjustable precision scale
Turnet
■■ With fine adjustment acting as limit stop of lathe slide
©2017 W.W. Grainger, Inc. W-XXXXX
12 Call or visit your local branch or go to grainger.com/dayton for complete product line information.
THE DAYTON DIGITAL READOUT IS A SIMPLE, COST EFFECTIVE POSITIONING DISPLAY SOLUTION FOR MANUAL MACHINE TOOL APPLICATIONS.The unit features a LED display screen and versatile software to accommodate milling and turning applications. The housing is die cast aluminum and the unit is capable of reading 1, 2, or 3 axis movements reading from mounted precision glass scales. Helping the operator to work smarter and faster the DRO functions include instant inch/mm conversion, bolt hole pattern calculations (full & partial circles, liner patterns), linear error compensation, tool position memory, 4 function calculator/trig calculator, absolute/incremental display, zero reset capability, feed rate display, reference point, speed display, and self-diagnostics. Our digital readout allows the operator to work faster with greater accuracy.
FUNCTIONS:■■ Reference point■■ Calculator■■ Absolute/Incremental operation■■ Coupling of axis (sum Z)■■ Sub D connector bushing■■ Conversion inch/metric thread■■ Pitch circle calculator (incremental dimension)■■ Full and partial circles and linear patterns (graduated circle)■■ Bolt hole pattern function■■ Permanent memory also in case of power failure
■■ Reversible measured values radius/diameter
GLASS SCALESDayton’s precision glass scales withstand the elements of contamination found in even the harshest machine shop environments while maintaining very high accuracy measurements.
Our precisions glass scales resist changes in size, shape and density due to temperature and humidity variations and are enclosed in a protective aluminum enclosure. This stability provides exceptional accuracy down to +/- 1.5 um (.00006”) resulting in tighter work piece tolerances.
FEATURES:■■ Totally enclosed odometry system with high-precision glass scale■■ Accuracy +-1.5 mm■■ Scanning carriage guided by miniature ball bearings and■■ connected to the mounting base via coupling■■ Rubber sealing lips protect against dust, chips and splash water■■ Mounting brackets
The Dayton digital readout is a simple, cost effective positioning display solution for manual machine tool applications.
Functions:· Reference point · Calculator · Absolute/Incremental operation· Coupling of axis (sum Z) · Sub D connector bushing· Conversion inch/metric thread· Pitch circle calculator (incremental dimension) · Full and partial circles and linear patterns (graduated circle) · Bolt hole pattern function· Permanent memory also in case of power failure · Reversible measured values radius/diameter
Technical data· Three evaluable measuring inputs with seven correction memories each for tools · Electrical connection 115V ~60 Hz· Dimensions L x W x H: 11" x 2-3/4" x 7-1/4" · Weight: 6 lbs.
DRO
The unit features a LED display screen and versatile software to accommodate milling and turning applications. The housing is die cast aluminum and the unit is capable of reading 1, 2, or 3 axis movements reading from mounted precision glass scales. Helping the operator to work smarter and faster the DRO functions include instant inch/mm con-version, bolt hole pattern calculations (full & partial circles, liner patterns), linear error compensation, tool position memory, 4 function calculator/trig calculator, absolute/incremental display, zero reset capability, feed rate display, reference point, speed display, and self-diagnostics.
Our digital readout allows the operator to work faster with greater accuracy.
Glass ScalesDayton’s precision glass scales withstand the elements of contamination found in even the harshest machine shop environments while maintaining very high accuracy measurements.
Our precisions glass scales resist changes in size, shape and density due to temperature and humidity variations and are enclosed in a protective aluminum enclosure. This stability provides exceptional accuracy down to +/- 1.5 um (.00006”) resulting in tighter work piece tolerances.
Glass Scale
Features:· Totally enclosed odometry system with high-precision glass scale· Accuracy +-1.5 mm· Scanning carriage guided by miniature ball bearings and
connected to the mounting base via coupling· Rubber sealing lips protect against dust, chips and splash
water· Mounting brackets
Glass Scale Digital Read Out
TECHNICAL DATA■■ Three evaluable measuring inputs with seven correction memories each for tools
■■ Electrical connection 115V ~60 Hz■■ Dimensions L x W x H: 11" x 2-3/4" x 7-1/4"■■ Weight: 6 lbs.
Glass Scale
DRO
top related