kewtech catalogue 2013
Post on 15-Mar-2016
227 Views
Preview:
DESCRIPTION
TRANSCRIPT
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specificationskew
tech
corp
.com
PRODUCT2013catalogue
Go to www.kewtechcorp.com for full specificationsGo to www.kewtechcorp.com for full specifications
Kewtech Multifunction testers are renowned for their accuracy and repeatability
MultifunctionTestersAs with all Kewtech products the user interface is straight forward. Benchmarked
against others – the best loop performance with low susceptibility to noise and RCD uplift.
All these multi-functions have the auto-RCD test which means that after you press the test button you only have to stand by the distribution board and for every trip of the RCD simply reset it. The instrument will capture all the relevant tripping times. A great time saver.
All three multifunctions exhibit these FIVE key attributes.
1 2 loopBESTperformance
EASEof use 3 BANGS
NO
4 TestG7 Leads
5 AUTORCD test
O - OFF O - OFF O - OFF O - OFF O - OFFO - OFF
The loop readings should be the same above and below the RCD
Continuous live circuit monitoring so no bangs when you inadvertently touch live circuits during dead testing – even with the test button locked down.
High integrity test leads – tested for flexibility, impact, strain relief and for consistent crocodile clip performance.
The KT63 is the small MFT packed with BIG features, designed for the domestic installer.
The KT63 has features that you normally find on more expensive testers, as well as the Kewtech's key attributes the high current loop test measures true loop impedance and for manual testing of an RCD the phase angle is automatically changed at each press of the test button, another time saver.
2
IP54
Go to kewtechcorp.com for full specifications
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
The KT64 is for the commercial / domestic electrician with a more comprehensive RCD function.
Remote test button probe provides an alternative way to start a test
The rotary dial and function keys mean a very straight forward user interface
Auto RCD test - all results on one screen
The KT65 has all the attributes of the KT64 plus phase rotation, earth resistance* and advanced memory.
The KT64 tests a larger range of RCDs and has a dot-matrix screen which allows for all the results of an RCD test to be shown on one screen.
The KT65 is designed for the all round domestic / commercial and industrial electrician who needs phase sequencing and has earth spikes to install on TT and in earthing systems.
The advanced memory allows you to tag a result to a site, distribution board, circuit number and type of test ie; ‘R1 + R2’ or ‘R2’ for continuity tests. 3
MultifunctionTesters
*Earth resistance using optional earth spike kit (ACCESKIT)
Go to www.kewtechcorp.com for full specifications Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
KT63 KT64 KT65
Continuity Null 200mA • • •Auto null of test leads • • •Insert insulation at 500V • • •Insulation 250 V, 500 V & 1000 V • • •Maximum M Ohm reading at 500V 2000 2000 2000
Continuous Live warning • • •High voltage LED light • • •Low current ATT non RCD trip loop test • • •High Current Loop Test • • •PSC / PFC test • • •‘Hands free’ testing • • •Backlight • • •Same connection points at the instrument for dead & live testing • •RCD type AC & ACS • • •RCD type A & AS • •10mA & 1000 mA RCDs • •RCD auto test 30mA • • •RCD auto test 10, 30, 100, 300, 500, 1000 mA • •RCD auto test all results on one screen • •Test probe with remote test button • •Advanced memory software included •Phase rotation •Earth resistance with optional ACCES KIT page 17 •Protective lid on instrument • •Carry case with extra space for testing accessories Hard Soft Soft
Fused test leads Option Option Option
IP40 / 54 54 40 40
Wiring & lead polarity check • • •Mains Polarity check •Touch pad for earth potential limits 25 V or 50 V • •Volts measurement • • •
£775 £1,055 £1,2954
Easy to compile 17th edition certification MultifunctionTesters
Certification
TC1 - The base document this includes the schedule of inspections
PLUSThe results page TC5 for up to 12 ways and TC6 for up to 36 ways
TC3 - The base document – The Electrical installation Condition Report (formerly periodic inspection)
PLUSThe schedule of inspections.TC4 for less than 100A supply or TC8 for greater than 100A supply
PLUSThe results page TC5 for up to 12 ways and TC6 for up to 36 ways
TC2 is a standalone cert. for Minor Works & TC7 joins TC3 for extra observations when applicable
Fire Alarms: FIRLOG & FIRCERTEmergency lighting: EMLOG & EMCERT
For New Installations
For Existing Installations
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
Kewtech's KTD range offers outstanding value
KT41 KT42 KT45 KT56
High current loop test • • •Low current loop test ATT - non RCD trip of all types •Hi current non-trip loop test (D-Lok) of passive RCDs •Polarity check with LED indication • • • •Does not require batteries • • •Lockdown button for ‘hands free’ operation • • • •External earth probe for earth electrode testing • •18 RCD test ranges plus DC test for type A RCDs •
£317 £493 £519 £307
Live Testing - Loop & RCD
Code Description
KTD30 Digital insulation/continuity tester, auto-null, 'hands free' test mode, live circuit warning £239
KTD40 Digital Loop impedance tester, high and low 'no trip' test currents, 'hands free' test mode. PSC/PFC. Mains Lead included only (add ACC016E for dist. board lead set)
£299
KTD50 Digital RCD tester with auto test. Tests 30, 100, 300 & 500mA RCDs. Mains Lead included only (add ACC016E for dist. board lead set)
£239
KTD40 & KTD50 testers comes with a full socket polarity function
Kewtech's classic range for the traditionalist
KT31 KT35 KEW
3125Analogue (A) / Digital (D) (A) (D) (D)
Continuity 200mA • •Insulation 250V 500V 1000V • •Insulation 500V 1000V 2500V 5000V •Auto-null lead compensation • •Live voltage warning • • •Lockdown button for ‘hands free’ testing • • •
£264 £296 £847
Dead Testing - Insulation / Continuity
Installation KitsKT17A
KITKT17B
KITKT35 • •KT42 •KT45 •KT56 • •
£1,055 £1,055
Single 17th Edition Testers
5
Function
Go to www.kewtechcorp.com for full specifications Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
PAT ADAPTOR 1Makes a PAT tester out of your multifunctionor insulation / continuity tester. For PATdocumentationuse PATLOG2.
£42.00
ACC50MTLFor long distance R2 & mains earth bond testing.50m of high quality multi-stranded test lead.
£95.00
KEWLOKLocking out device fits most toggle MCBs and Mains Switches - saves on multiple kits.
Includes warning labels.
£22.00
KEWCHECK R2 R2: For fast and secure testing of ring mains.
£22.00
£80.00
LIGHTMATE KITFor faster, safer testing at light fittings. Pouch containingBC, ES, GU10, SES, SBC
KEWCHECK R2 FLJust attach your own connector for any system.
£22.00
17th EditionAccessories
6
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
ACC040
The G7 range of test leads are strong and robust and come with universal 4mm and IEC Connectors which means they fit all leading brands of test instruments.
ACC020
SOLTL1
ACC016E ACC065
ACC070 FUSE500FUSE10
KAMP12 KAMP13
CLA
MPS
DM
MS
KT6
1
KT6
2
KT6
3
KT6
4
KT6
5
KT3
1
KT3
5
KT4
1
KT4
2
KT4
5
KT5
6
KT6
0
KTD
30
KTD
40
KTD
50
ACC016E 3 Wire fused dist. board lead set with IEC connector • • • • • • £48
ACC020 Two non-fused test leads with right angled 4mm connectors • • • • • £32
ACC040 2 Fused prods with croclips for use with ACC020 £32
ACC060 2 Wire fused test leads with 4mm connectors £48
ACC063 3 Wire non-fused test leads, 4mm connectors & piggyback earth • £48
ACC064SP Remote test probe for KT64 & KT65 • • £32
ACC065 3 Wire non-fused dist. board lead set with 4mm connectors • • £53
ACC070 3 Fused prods with croclips for us with ACC065 £43
Fuse 500 Pack of 10 500mA 600V fast blow fuses • • • • • • £10
Fuse 10 Pack of 10 10A fuses for test leads All fused test leads £10
KAMP12 Mains Lead with 4mm connectors • • • £27
KAMP13 Mains Lead with IEC connector • • • • • • • • • £27
JUMPLD 1 4 x Jump leads for insulation and R1+R2 testing at dist. boards £22
SOLTL1 4mm PV panel test leads with quick release MC4 connectors £35
• = Included as standard = Optional extra
JUMPLD1
Test
7
LeadsACC063ACC060
Go to www.kewtechcorp.com for full specifications Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
Complete PAT testing solutions from Kewtech enable fast, reliable testing and documentation for your PAT requirements
KT71 KT72 KT76 KT77
Earth bond 200mA for IT equipment • • • •Earth bond high current • •Insulation test at 250V & 500V • • • •Run leakage test at mains voltage (soft test) • • •Substitute leakge current 110V • •Substitute leakage current 230V •Extension lead test • • • •110V Appliances ∗ ∗ • •230V Appliances • • • •Automatic test sequences • • •Downloading •USB portable memory stick •Industrial roto-moulded case with lid • •Thermoplastic case with lid • •Mains powered • • •Battery powered (8 x AA batteries - included) •∗ with optional adaptors £625 £575 £795 £1295
• Battery powered
• Automatic test sequences
KT72
• KT71 PAT Tester
• Carrying case
• EL110 PAT Kit - Adaptor plug
• PATLOG2 Log book including pass labels
• 250 Fail labels • Kewcheck 103 - Mains wiring tester
• Phillips Screwdriver
• Slotted Screwdriver
• Wire Cutters
• Kewtech Pen
KT71 PRO KIT contains:
£795.00
As easy as 1,2,3.3. Press start!
2. Select yourchoice of test.
1. Plug in yourappliance
PATTesters
8
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
Code Description KT71 KT72 KT76 KT77 Price
PATLOG 1 Manual log for multiple sites • • • £19
PATLOG 2 Manual log for single site • • • £12
LR Earth Long reach earth probe (ideal for monitors & fans) • • • • £34
EL110 PAT KIT Adaptor enables 110V EB, ins. & ext. lead testing • • £48
ELKIT 110, 230 & 400V adaptors • • • • £139
500PASS 500 Pass labels • • • • £16
250FAIL 250 Fail labels • • • • £11
KAMPS Short IEC lead for extension lead testing • • £22
KEWSNAP 1 50 tags protects labels with clips for cables • • • • £42
KEWSNAP 2 50 tags protects labels for use with cable ties • • • • £42
ACCBARCODE Barcode reader • £211
ACC1000 Barcode labels 0 - 1000 • £64
EL KIT
500PASS
KEWSNAP1/2LR EARTH
EL110PAT KIT
All the PAT testing options you’ll ever need.
PATLOG 2
Comes with Pass labels
Includes 110, 230 & 400V adaptorsKT71• Mains powered
• Automatic test sequences
PAT AccessoriesTesting
9
Go to www.kewtechcorp.com for full specifications Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
10
The very latest in Portable Appliance Testing along traditional lines - tests your appliance not your patience
• Tests 230V appliances
• Tests 110V appliances
• 200 mA Continuity
• 250 / 500V Insulation
• 230V Earth leakage – differential measurement
• 110 V Substitute leakage
• 230V Touch leakage
• Large clear display
• Extension lead and IEC lead tests
• Calibrated earth bond lead
• Adjustable pass / fail limits
• Reference inner lid label
• Uses high impact resistance rotomoulded case with room for test leads - a self-contained tester
• Tests in accordance with the IEE Code of Practice for in service inspection and testing of electrical equipment
The KT76 is an easy to use 230V & 110V manual portable appliance tester.
The large screen retains all the results relevant to the appliance being tested so that manual documentation is made easy.
The 230V and 110V separate sockets make it easy to connect your appliance.
The special rotomoulded case gives the best protection to the instrument as well as storing the relevant leads for your Pat testing.
PATTesters
Positive feedback press buttons enable you to select the appropriate test and the membrane facia and keypad makes it easy to keep clean.
Insulation can be undertaken at either 250V or 500V enabling Pat testing in line with the latest code of practice. The inner lid label gives a quick reference to permitted minimum and maximum values and the tester has adjustable presets which can be selected accordingly.
KT76 Manual PAT Tester
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
11
• Tests for 230V and 110V appliances
• Standard and programmable test sequences
• Sophisticated data capture with querty keyboard and fast recording systems
• Fast versatile download via USB stick
• Help screens
• Expert and normal mode
• Table of lead resistances
• 100 mA, 10A & 25A Continuity
• 250 / 500V Insulation
• 230V Earth leakage – differential measurement
• 110V Substitute leakage
• Touch leakage
• Large clear display
• Extension lead and IEC lead tests
• Calibrated earth bond lead
• Selectable pass limits
• Uses high impact resistance rotomoulded case with room for test leads - a self-contained tester
• Tests in accordance with the IEE Code of Practice for in service inspection and testing of electrical equipment
Short cut keys & Qwerty keyboardThe only PAT tester with simple to use USB connectivity
Print out your own certificates
KEWPAT PRO SOFTWAREAnother strength of the KT77 is KEWPAT Pro, a simple to use software package that lets you store, manage and print out test certificates and reports. At only £245.00
KT77 Downloading Portable Appliance Tester
PATTestersThe versatile full 230V and 110V downloading portable appliance tester
PATKIT ABuy all your downloading PAT testing equipment all at once. Contains everything you need.
• KT77• KEWPAT Pro software• Pass Fail labels• KAMPS - IEC lead for extension lead testing
£1695.00
Go to www.kewtechcorp.com for full specifications Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
KEWCHECK 103 High definition LEDs with clear audible tone. Indicates 14 wiring conditions.
£17.00
Code Description Price
KEW8008 10:1 ratio enables readings of up to 3000 A
£264
KEW8112 Clamp Adpaptor for DMMs 0.1mA - 120A AC
£264
Easily identify those circuits with the Fusefinder. Complete with mains and fused test lead set.
£148.00
FUSEFINDER
103 106 107
Correct polarity at the socket Are there any wrong or mis-connections? Quality of the earth loop Are all connections and the condition of the earth return path safe? Check Mains Polarity Polarity can also be incorrect at the incoming mains, this is very hazardous
RCD Check Tests for 30mA 1 x functionality
Advanced socket testers
Standard socket testers only tell you that the polarity is correct at the socket, they cannot indicate the quailty of the earth loop.
The Loopcheck 106 & 107 can!
The 107 also checks polarity at the mains distribution board.
LOOPCHECK 106Full socket tester & loop check
£45.00
CLAMP ADAPTOR
Socket Testers Clamp Adaptors&
12
LOOPCHECK 107As 106 plus RCD and mains polarity. Makes a great partner for PAT testers and covers RCD testing obligations for PAT testing.
£55.00
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
KEW170012 - 690 voltage indication by 7 LEDs. Continuity and phase rotation. Indicates even if batteries are flat. Includes torch feature.
£63.00
KEW1710Features as above plus LCD voltage readout.
£99.00
KEWPROVE3Proving unit - works with all leading brands of two pole voltage detectors. Voltage jumps to 690 V then ramps down.
£95.00
KEW8031FPhase rotation meter. Intuitive rotating disc type. New and old colour schemes. Fused test leads.
£148.00
KEW8035Non contact phase rotation meter. Just clip over insulation. For 2.4 - 30mm dia. cables.
£265.00
KEWSTICK UNOThe UNO's latest innovative circuits means better performance.
£17.00
Foolpoof visual voltage detection. Great for hazardous areas - no batteries required!
KEWVOLT1 230 & 400V AC/DC
£27.00
KEWVOLT26,12,50,120, 230, 400V AC/DC
£38.00
RB1LED replacement lamp for voltage test lamps.
£30.00 (lamp only)
VoltageDetection
Rotation
13
KEWSTICK DUOPatent applied for dual sensitivity Voltage Detector. For reduced sensitivity simply press and hold the attenuation button. It features two colour LED feedback: a heartbeat (by green LED ) and voltage detection is indicated by a red LED and buzzer.
£25.00
new
Phase
Go to www.kewtechcorp.com for full specifications Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
A clamp to suit all needs from earth leakage to Cat IV applications. These clamps have DMM functions - Two products in one!
Unit KT2
00
KT2
03
KT2
003A
KEW
2016
R
KEW
2040
KEW
2046
R
KEW
2055
KEW
2056
R
KEW
2300
RO
PEN
JAW
KEW
2432
KEW
2434
Max Current AC A 400 400 2000 2000 600 600 1000 1000 100 100 100
Max Current DC A 400 2000 600 1000 1000 100
Max Volts AC/DC V 600 600 1000 600 600 600 600
Minimum resolution A 0.01 0.01 0.1 0.1 0.1 0.1 0.1 0.1 0.1
Leakage (min resolution) mA 0.001 0.1
Selector to eliminate harmonics • • •Jaw size mm 33 33 55 55 33 33 40 40 10 40 28
Resistance (with buzzer) • • • • • • •Data Hold • • • • • • • • •Peak Hold • • • •Min / Max (Max only) (Max) • • • •Sleep feature • • • • • • • • • •Sleep feature can be overridden • • • •TRMS TRMS TRMS TRMS TRMS
Non Contact Voltage detection • • • • •Capacitance • •Frequency • • • •Backlight • • •Temperature • •Ideal for PV installations
£59 £95 £275 £275 £122 £175 £144 £207 £158 £529 £264
KT203Ideal for Solar InstallationsI
14
ClampMeters
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
KT115 KT116 KT117 KEWMATE 2001
Max voltage AC/DC 600V 600V 600V 600V
Max current AC/DC 10A 10A 10A
Open jaw current AC/DC 100A
Max current DC
Resistance • • • •Continuity buzzer • • • •Capacitance • • •Diode • • •Temperature •Frequency • • • •Data hold • • • •Min / Max • • •TRMS TRMS
Bar graph • •Analogue / Digital Digital Digital Digital Digital
£52 £74 £84 £122
Great value, great specification multimeters
Code Description Price
KEW6310 Power Quality Analyser £3,709
KEW8124 Clamp 68mm 1000A POA
KEW8125 Clamp 40mm 500A POA
KEW8127 Clamp 24mm 100A POA
KEW8147 Load / Leakage Clamp 70A POA
KEW8312 Power Supply Adaptor takes single phase supply from test leads POA
KEW9132 Magnetic Carrying Case POA
The KEW6310 has Kewtech’s hallmark easy user interface
It comes in a complete kit ready for use including three flexi-clamps. In fact there are too many fantastic features to mention here - take a look at our website.
15
Multimeters
PowerQuality
Digital
Go to www.kewtechcorp.com for full specifications Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
Kewtech’s latest range of environmental instruments are specifically targeted at the electrical contractors’ legal requirements.
• Range 40 000 Lux• Advanced auto-backlight LCD display• Min / max hold• Beats minimum accuracy requirement
£69.00
• Range 40 – 130dB range• Dedicated to A weighting – just what
the electrical contractor needs• Beats minimum accuracy requirement• Advanced auto-backlight LCD display
• Min / max hold
£59.00
• Measures up to 30.00 m/s• m/s to litres per second
conversion table.• Advanced auto-backlight LCD
display• Min / max hold
£89.00
• Measures up to 1999w/m2
• High accuracy and rapid response sampling• 50mm LCD display• Data hold freezes displayed value• Max/min data hold• Low battery indication
£139.00
KEWVPV1 - Irradiance meter
KEWSL1 - Sound meter
KEWLM1 - Light meter
KEWAM1 - AnemometerSOLAR KIT1• KEWPV1 – Irradiance meter• KT203 – AC/DC clamp meter• Carry Case
£225.00
16
RangeEnvironmental
• KEWSL1• KEWLM1• KEWAM1• Carry case
£199.00
ENVIRON KIT 1 SOLT 14mm PV panel test leads with quick release MC4 connectors
£35.00
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
17
• Continually validate your instruments through regular self-checking• 12 comprehensive test points covering • Loop/RCD and Insulation / Continuity• Null facility to remove lead resistance• Easy to use• Tough drop-proof watertight case
Checks all functions for all makes of 17th edition installation testers - Loop/RCD/ Insulation - Continuity and Multifunction testers
Instrument ValidationFC2000
Code Description Price
KEW4105A Three / two wire Earth Resistance tester £317
KEW4200 TRMS Earth Resistance clamp meter £990
ACCES Kit Earth spike kit for KT65 £80
Use the KEW4105A for single earth spike systems
and the KEW4200 for multi earth spike systems.
Code Description Price
FC2000 Comprehensive check box – enables you to comply with all your 17th edition monitoring obligations
£169
Checklog For recording your check box results £19
EarthResistance
Go to www.kewtechcorp.com for full specificationsGo to www.kewtechcorp.com for full specifications
18
Repair Calibration&
Kewtech offer fast and efficient Bag&Tag calibration service. Should any of your instruments require calibration or repair simply follow the step by step guide.
Your step by step guide to using Bag&Tag...
Call Sarah at ExpressCal to arrange a Bag&Tag collection on 01302 761044
S T E P O N E
All calibrations will be completed the day of receipt and any instruments requiring repair will be quoted before any work is carried out.
S T E P T H R E E
REPAIRQUOTATION
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
19
Instrument Name Calibration Trade Cost
Fixed Price Repair*
Insulation / Continuity Tester £35 £125
Loop Tester £35 £125
RCD Tester £35 £125
Loop / RCD Tester £35 £125
Test Kit (3 Meters) £75 N/A
Multifunction Tester £75 £145
Manual PAT Tester £55 £125
Downloading PAT Tester £55 £225
Clamp Meter £35 £75
Multimeter £35 £35
Calibration Check Box £45 £95
Proving Unit £20 £35
Phase Rotation Meter £35 £55
Fuse Finder £35 £75
Light Meter £35 £55
Sound Level Meter £35 £55
Anemometer £35 £55
Earth Resistance Meter £35 £95
Infra Red Thermometer £35 N/A
Microwave Tester £35 N/A
Thermal Imaging Camera £95 N/A
Power Quality Analyser £155 £645
PriceList
*Kewtech instruments only
Collection will be made the same day if booked in before 12.30pm, otherwise it will be the following day.
You will be contacted to take payment for work carried out. Once payment is received the instruments will be despatched for next day delivery.
S T E P T W O
S T E P F O U R
Go to www.kewtechcorp.com for full specificationsGo to kewtechcorp.com for full specifications
Trade17th EDITION SINGLE FUNCTION TESTERSKTD30 Digital 250/500/1000v Insulation/Continuity Tester - Hand held £239.00KT31 Analogue 250/500/1000V Insulation/Continuity Tester £264.00KT35 Digital 250/500/1000V Insulation/Continuity Tester £296.00KEW3125 High Voltage 5000V Insulation Tester £847.00KTD40 Digital Loop/PSC Tester with ATT - Hand held £299.00KT41 Digital Loop/PSC Tester £317.00KT42 Digital Loop/PSC Tester with D-Lok £493.00KT45 Digital Loop/PSC Tester with ATT £519.00KTD50 Digital RCD Tester - Hand held £239.00KT56 Digital RCD Tester £307.0017th EDITION TEST KITS / MULTIFUNCTION TESTERSKT17AKIT 17th Edition Kit KT35/KT42/KT56 with Carry Case £1,055.00KT17BKIT 17th Edition Kit KT35/KT45/KT56 with Carry Case £1,055.00KT62 Digital 5-in-1 Multifunction Tester £822.00KT63 Digital 6-in-1 Multifunction Tester with ATT £775.00KT64 Digital 6-in-1 Multifunction Tester with ATT £1,055.00KT65 Digital 8-in1 Multifunction Tester with ATT (Downloadable) £1,295.00PAT TESTERS & ACCESSORIESKT71 Manual PAT Tester with automatic sequences - mains powered £625.00KT71 PRO KIT Complete PAT Testing Kit including the KT71 £795.00KT72 Manual PAT Tester with automatic sequences - battery powered £575.00KT76 Manual 230 V & 110 V PAT tester £795.00KT77 Downloading 230 V & 110 V PAT tester £1,295.00PAT ADAPTOR 1 Portable Appliance Adaptor Box for 17th Edition Instruments £42.00KAMPS Short IEC Lead for extension lead testing £22.00PATLOG 1 PAT Testing Log Book can be used for multiple sites £19.00PATLOG 2 Manual Log for single site (ideal for PAT ADAPTOR 1) £12.00500PASS 500 Appliance Pass Labels £16.00250FAIL 250 Appliance Fail Labels £11.00EL110PATKIT 110V Adaptor Kit for KT71 £48.00ELKIT EL110PATKIT Plus 110V 230V & 400V Adaptors £139.00ACCBARCODE Barcode Scanner for use with KT74 £211.00ACC1000 Barcode Labels for ACCBARCODE £64.00LR EARTH Long Reach (65mm) Earth Bond Probe £34.00KEWSNAP 1 50 Snap Tags with clips £42.00KEWSNAP 2 50 Snap Tags without clips (for cable ties) £42.00CLAMP METERSKT200 Digital 400A/600V AC Clamp Meter £59.00KT203 Digital 400A/600V AC/DC Clamp Meter £95.00KEW2003A Digital AC/DC 2000A Clamp Meter £275.00KEW2016R Digital AC 2000A Clamp Meter with True RMS £275.00KEW2040 Digital 600A AC 600V AC/DC Clamp Meter £122.00KEW2046R Digital 600A & 600V AC/DC Clamp Meter with True RMS £175.00KEW2055 Digital 1000A & 600V AC/DC Clamp Meter £144.00KEW2056R Digital 1000A & 600V AC/DC Clamp Meter with True RMS £207.00KEW2300R Digital AC/DC Fork Current AC 100A Tester with True RMS £158.00KEW2432 Digital 100A Earth Leakage Clamp Meter 0.001mA resolution £529.00KEW2434 Digital 100A Earth Leakage Clamp Meter 0.1 mA resolution £264.00KEW8112 Clamp Adaptor for 0.1mA - 120A readings £264.00KEW8008 Clamp Adaptor for up to 3000A readings £264.00MULTIMETERSKT115 Digital 600V & 10A AC/DC Multimeter £52.00KT116 Digital 600V & 10A AC/DC Multimeter with Temperature Measurement £74.00KT117 Digital 600V & 10A AC/DC Multimeter with True RMS £84.00KEWMATE 2001 Digital 600V & 100A AC/DC Multimeter with 1mm open clamp sensor £122.00EARTH RESISTANCEKEW4105A Digital Earth Resistance Tester with Soft Carry Case £317.00KEW4200 Digital Earth Resistance Clamp Tester with True RMS £990.00
CALIBRATIONFC2000 Fast Check Calibration Check Box £169.00CHECKLOG Log Book for Check Box Results £19.00VOLTAGE DETECTION - PHASE ROTATION - SOCKET TESTERSKEWSTICK UNO Non Contact Voltage Detector £17.00KEWSTICK DUO Non Contact Voltage Detector - dual sensitivity £25.00LOOPCHECK106 Full socket tester with a loop check £45.00LOOPCHECK107 As Loopcheck106 with mains polarity and RCD test £55.00KEWCHECK103 Socket Tester with Audible Tone £17.00KEWCHECKR2 Socket Testing Adaptor £22.00KEWCHECK R2FL Socket Testing Adaptor with flying lead £22.00KEW1700 Voltage/Continuity Tester with Phase Rotation Indicator £63.00KEW1710 Digital Voltage/Contirnuity Tester with Phase Rotation Indicator £99.00KEWVOLT1 Voltage Tester 230/400V - No batteries required £27.00KEWVOLT2 Voltage Tester 6-400V - No batteries required £38.00KEW8031F Phase Rotation Tester £148.00KEW8035 Non Contact Phase Rotation Meter £265.00KEWPROVE3 Proving Unit £95.00CERTIFICATION BOOKS Used withTC1 Electrical Installation - 40 sheets TC5 or TC6 £19.00TC2 Minor Works Cert - 40 sheets £19.00TC3 Electrical Inst. Condition Report TC4 or TC8 & TC5 or TC6 £19.00TC4 Condition Report Insp. Schedule up to 100A TC3 £19.00TC5 Test Results for up to 12 ways TC1 or TC3 £19.00TC6 Test Results for 36 ways and greater TC1 or TC3 £19.00TC7 Observation Test Book TC3 £19.00TC8 Condition Report Insp. Schedule over 100 A TC3 £19.00EM1 LOG Emergency Lighting Log Book £19.00EM CERT Emergency Lighting Certificate £19.00FIR1 LOG Fire Alarm Log Book £19.00FIR CERT Fire Certificate £19.00TEST LEADS - 17th EDITION ACCESSORIES - LIGHTMATESACC50MTL 50m Extension Test Lead £95.00ACCES Kit Earth Spike and Lead Kit for KT65 £80.00ACC016E 3 Wire Distribution Board Test Leads with IEC Mains Plug £48.00ACC020 Non- Fused 2 Wire Test Leads with right angle connectors £32.00ACC040 Fused Probes & Croc Clips (Set of 2) £32.00ACC060 2 Wire fused test lead set £48.00ACC063 3 Wire non-fused dist. board test lead set for KT63 £48.00ACC064SP Remote Test Probe for KT64 & KT65 £32.00ACC065 Non-Fused 3 Wire Multifunction Test Lead Set For KT64 & KT65 £53.00ACC070 Fused Probes & Croc Clips for KT64 & KT65 (Set of 3) £43.00FUSEFINDER Fusefinder with mains and fused test lead set £148.00JUMPLD1 Jump leads for insulation & R1+R2 testing at distribution boards £22.00KAMP12UK Mains Lead for KT64 & KT65 £27.00KAMP13UK Mains Leads with IEC Plug £27.00KEWLOK Lock Out Device - Fits Most MCBs £22.00LIGHTMATE KIT Kit of 5 Lightmates: BC, ES, GU10, SES, SBC £80.00SOLTL1 4mm PV panel test leads with quick release MC4 connectors £35.00ENVIRONMENTAL RANGE - SOLAR KITSKEWAM1 Anemometer £89.00KEWLM1 Light Meter £69.00KEWSL1 Sound Level Meter £59.00KEWPV1 Irradiance Meter £139.00ENVIRON KIT 1 KEWSL1 + KEWLM1 + KEWAM1 + Carry Case £199.00SOLAR KIT 1 KEWPV1 + KT203 + Carry Case £225.00 POWER QUALITYKEW6310 Compact Power Quality Analyser Kit £3,709.00
Kewtech Corporation Limited Sales: 01494 792 212 F: 01494 791 826 Tech: 01522 546 888 E: sales@kewtechcorp.com
Price List
top related