initial consideration on the low- section of muon linac

Initial consideration on the low- section of muon linac

4th meeting on muon g-2/EDM experiment

Jan. 30, 2009

Masanori Ikegami

Outline

• Assumptions

• Space-charge effect?

• Two possible options

• Summary

Assumptions

• Muon generation with – 40,000 muons per bunch– Isotropic momentum spread of 3 keV/c – RMS size of 2.5 mm – RMS pulse length of 3 psec

• Ideal initial acceleration to =0.08– Simply adding the longitudinal momentum keeping

the RMS beam size, RMS pulse length, and the momentum spread.

=0.08 corresponds to 3 MeV for proton.

Kinetic parameters

MUON PROTON

Mass [MeV/c2] 105.7 938.3 0.08 0.08 1.0032 1.0032 0.0803 0.0803p0 [MeV/c] 8.48 75.3Ek [MeV] 0.340 3.02

Transverse distribution

r⊥= x2 = y2 = 2.5 mm( )

′ x 2 ≡dxds

⎛ ⎝ ⎜

⎞ ⎠ ⎟2

= 0.355 mrad( )

Analogously,

′ y 2 ≡dyds

⎛ ⎝ ⎜

⎞ ⎠ ⎟2

= 0.355 mrad( )

assuming

px2 = py

2 = pz − p0( )2

= 3 keV /c( )

Longitudinal distribution

rz = Δz2 = βc Δt 2 = 0.07 mm( )

Δt 2 = 3 psec( )assuming

Δz ≡ z − z0

of the design particle.

z0 ≡ βct0

Δ ′ z 2 ≡dΔzds

⎛ ⎝ ⎜

⎞ ⎠ ⎟2

≈pz − p0( )

= 0.355 mrad( )

with being the longitudinal position

Δt ≡ t − t0 with

t0 being the arrival time of the design

particle to a certain position.

Longitudinal distribution (cont.)

Δφ2 = 2πf Δt 2 = 0.35 deg( )

being the kinetic energy of the design particle.

fcoordinate with

Δφ≡2πfΔt

ΔE2 ≈ 2E0

pz − p0( )2

= 0.24 keV( )

We here introduce for the longitudinal

We assume

f = 324MHz

the fundamental frequency.

We also introduce

ΔE = E − E0 with

E0 = 0.34MeV

Comparison with J-PARC MEBT

x [mm]

x’ [mrad]

2.5-2.5

0.89 mm•mrad

Δ [deg]

ΔE [keV]

0.35-0.35

0.084 keV•deg 0.025 mm•mrad

x [mm]

x’ [mrad]

1.1-1.1

-2.6 2.9 mm•mrad

Δ [deg]

ΔE [keV]

5.8-5.8

-16 93 keV•deg 3.15 mm•mrad

MUON MUON

J-PARC J-PARC

E0 = 0.34MeV

E0 = 3MeV€

ε⊥ =

Envelope equation

d2r⊥ds2 = −kβ 0

2r⊥+K3D 1− f α( )( )

2r⊥rz

+ε⊥

ds2 = −ks02rz +

K3D f α( )r⊥

2 +ε z

r⊥≡ x2 = y2

rz ≡ z2

kβ 0 , ks0

; distance along the beam line

; external focusing strength

Envelope equation for an axial symmetric bunched beam is;

ε⊥,ε z ; unnormalized rms emittance

Envelope equation (cont.)

; generalized perveance for a bunched beam

; classical radius of the particle€

K3D ≡3Nrc

β 2γ 3

N ; number of particle per bunch

rc ≡q2

4πmc2

rc =1.53×10−18 m for proton

rc =1.36 ×10−17m for muon

with ; bunch frequency,

I ; peak current,

For J-PARC linac 30 mA operation,

N = 4 ×104

For muon linac103 difference in

q ; elementary electric charge

N =30 ×10−3

1.602 ×10−19 × 324 ×106 = 5.8 ×108

K3D =3× 5.8 ×108 ×1.53×10−18

0.082 = 4.17 ×10−7 m( )

K3D =3× 4 ×104 ×1.36 ×10−17

0.082 = 2.56 ×10−10 m( )

f α( )

α ≡ r⊥γrz

; aspect ratio in the beam frame

f α( ) ; form factor

α ≡ r⊥γrz

For α > 1,

f α( ) ≡α 2

α 2 −11−

α 2 −1tan−1 α 2 −1( )

⎡ ⎣ ⎢

⎤ ⎦ ⎥

α ~ 40 in muon linac@=0.08

Beam envelope for drift (=0.08)

The beam envelope for drift (without external focusing)Obtained by integrating the envelope equationNo accelerationDrift for 12 m or 0.5 sec

r⊥ m( )

rz m( )

s m( )

Red: w/ space chargeBlue: w/o space charge

Two options

• Option 1: No longitudinal focusing with low frequency s is set to 0 deg (on crest).

– The frequency is chosen to be 324 MHz or lower.

3 ps 0.36 deg @324 MHz 210-5 deviation in energy gain – Optional transverse focusing

• Option 2: With longitudinal focusing matched to the injected beam– The focusing strength is chosen to be matched with the pulse wi

dth and momentum spread to avoid emittance growth from the nonlinear nature of the RF force.

– The transverse focusing is introduced, at least, to cancel the RF defocusing force.

Transverse focusing

• In both options, transverse beam manipulation before and after the accelerating section may be effective to ease the tolerance for the good field region.– The increased transverse momentum spread in the

accelerating section should be addressed.

Accelerating section

Quad’s Quad’sbeam

Option 1: No longitudinal focusing with low frequency

Instability

Δp / p

Might be feasible with small number of cells.

Num. of cells Num. of cells

Δp / p

Non-relativistic approximation.Start with 0.36 deg deviation from the crest.

Tentative plan for Option 1

E0 = 2.5 MV / m( )

φs = 0 deg( )

T = 0.8

f = 324 MHz( )

Plan 1-A: DTL without DTQ

= 0.08 to 0.7Energy gain: 42 MeVTotal length: 21 mNumber of cells: 58Time of travel: 0.18 s

Comparable to J-PARC DTL

Es max ≈ 0.8EKilpatrick =14.3 MV / m( )

It may be possible to increase assuming a short pulse.

Tentative plan for Option 1 (cont.)

E0 = 5.0 MV / m( )

φs = 0 deg( )

T = 0.8

f = 324 MHz( )

Plan 1-B: Higher gradient DTL without DTQ

= 0.08 to 0.7Energy gain: 42 MeVTotal length: 10.5 mNumber of cells: 29Time of travel: 0.09 s

Es max ≈ 1.6EKilpatrick = 28.6 MV / m( )

is increased assuming a short pulse.

Issues for Option 1

• Instability– Small number of cells is required.– Effect from abrupt cell variation?

• Small margin for the momentum spread specification– Tolerance for RF phase and amplitude– Transverse field uniformity

• Low shunt impedance at high- side– Unable to introduce frequency jump

ZT2 ~ 8M/m @=0.7 extrapolated from J-PARC SDTL

• Long total length

• RF defocusing from RF errors

Option 2: With longitudinal focusing matched to the injected beam

Matching condition

• We adopt the smooth approximation (or assume continuous focusing in both transverse and longitudinal).

• We find adequate external focusing strength to make the initial beam widths the equilibrium (matched beam widths).

• The external focusing strength can be found by solving the following equations.

kβ 02r⊥=

K3D 1− f α( )( )2r⊥rz

+ε⊥

ks02rz =

K3D f α( )r⊥

2 +ε z

Matching condition (cont.)

kβ 02 =

ε⊥2

r⊥4 =

′ x 2

x2Neglecting the space-charge term,

kβ 0 =′ x 2

x2= 0.142 rad / m( )

Similarly,

ks0 =′ z 2

z2= 5.07 rad / m( )

; Phase advance per meter for betatron oscillation

; Phase advance per meter for synchrotron oscillation

kβ 0 ∝1

We here assume acceleration up to = 0.7.

As , we should

satisfy the following condition,€

kβ 0 rad / m( )

At = 0.7,

kβ 0 = 0.0116 rad / m( )

x2 = const€

x2 px2 = const

To keep ,

′ x 2 ∝1

ks0 ∝1

we should satisfy the following

condition,

ks0 rad / m( )

At = 0.7,

ks0 = 0.415 rad / m( )€

z2 = const

To keep ,

′ z 2 ∝1

pz − p0( )2

Δt 2 ∝1β

z2 pz − p0( )2

= const

Longitudinal focusing force

ks0 =2πqE0Tsin −φs( )

β 3γ 3λmc2

; Average accelerating field

; Synchronize phase

; RF wave length

; Rest mass

; Transit time factor

RF defocusing

kRFD2 = −

; Focusing strength from quadrupole magnets

; Strength of RF defocusing

kβ 02 = kquad

2 + kRFD2

We need to introduce transverse focusing force to cancel the RF defocusing.

Case study 1

ks0 =11.14 rad / m( )

E0 = 2.5 MV / m( )

φs = −30 deg( )

λ =0.926 m( )

mc2 =105.7 MeV( )€

T = 0.8

f = 324 MHz( )

Comparable to J-PARC DTL

Conventional DTL can provide sufficient longitudinal focusing at low- side, but not at high- side.

ks0 = 0.261 rad / m( )

for = 0.08

for = 0.7

Case study 1 (cont.)

ks0 rad / m( )

Red: RequirementBlue: Conventional DTL

E0 MV / m( )Required

It may be possible to increaseassuming a short pulse.

φs requireddeg( )

Another possible way to vary is to adjust .

cos φs required( )

Tentative plan for Option 2

E0 = 0.5 − 6.3 MV / m( )

φs ≈ −30 deg( )

T = 0.8

f = 324 MHz( )

Plan 2-A: 324 MHz E0-ramped DTL

The longitudinal focusing is adjusted by ramping .

Transverse focusing can be provided with DTQ’s.

may be too high for high- side.

= 0.08 to 0.7Energy gain: 42 MeVTotal length: ~14 mNumber of cells: ~40Time of travel: 0.12 s

Case study 2

ks0 =18.11 rad / m( )

E0 = 3.3 MV / m( )

φs = −30 deg( )

λ =0.463 m( )

mc2 =105.7 MeV( )€

T = 0.8

f = 648 MHz( )

Higher frequency option

648 MHz DTL can provide sufficient longitudinal focusing at high- side with reasonable .

ks0 = 0.424 rad / m( )

for = 0.08

for = 0.7

ks0 rad / m( )

Red: RequirementBlue: Conventional DTL

E0 MV / m( )Required

It may be possible to increaseassuming a short pulse.

φs requireddeg( )

Another possible way to vary is to adjust .

cos φs required( )

Tentative plan for Option 2 (cont.)

E0 = 3.3 MV / m( )

φs ≈ −2 → −30 deg( )

T = 0.8

f = 648 MHz( )

Plan 2-B: 648 MHz s-ramped DTL

It is disadvantageous to ramp E0 to obtain required ks0 with higher frequency.

It may be possible to adopt higher gradient to shorten total length.

= 0.08 to 0.7Energy gain: 42 MeVTotal length: ~17 mNumber of cells: ~94Time of travel: 0.14 s

Issues for Option 2

• Feasibility of precise s- or E0- ramping

• Susceptible to the longitudinal parameter of the injected beam

• Nonlinearity of the RF force in s-ramping scheme

• Low shunt impedance at high- side– Frequency jump?

• Long total length

• Transverse focusing to cancel RF defocusing – DTQ or external quad?

Other possibilities

• To match the longitudinal focusing at the injection, but gradually introduce mismatch in the downstream portion without s- or E0- ramping– Does the beam distribution adiabatically change?

• To manipulate the longitudinal beam parameter with buncher and debuncher before and after the accelerating section.

Accelerating section

buncher debuncherbeam

Summary

• Low- section for muon linac are considered assuming ideal acceleration up to =0.08.

• Space-charge effects seem to be negligible.

• Two options are proposed:Option 1

No longitudinal acceleration

Option 2

With longitudinal acceleration matched to the injected beam

initial consideration on the low- section of muon linac

Documents

muon collider design workshop, bnl dec-09112/01/2009 c.w....

injector linac experiences at kekb /...

the atlas muon spectrometerthe atlas muon...

pichhoff linac lecture

fermilab linac overview

introductory)stahshcs)school,)march)2013)(desy))))ivov/talks/2013_03_21_desy_higgs...muon%...

muon colliders

muon poster

linac ag - en

muon lifetime

lhec : linac-ring option · lhec : linac-ring option...

linac dental

title slide progress toward an erl cryoplant design€¦ ·...

nlc linac bpms

development of muon linac for the muon g-2/edm experiment at...

main linac integration

2. spring-8 linac and accelerators control system ·...

califes linac

ring- linac lhec

post-linac collimation