icaleo 2012 table content - … min chae, jyoti mazumder ... adel salama, paul mativenga, lin li
Post on 29-May-2018
217 Views
Preview:
TRANSCRIPT
Opening Plenary Session
Green Photonics and Recent Progress in Laser ‐ Based Light Sources and Their Applications in
Materials Processing
High‐Power Laser Materials Processing (OP2)
Eckhard Beyer, Patrick Herwig, Stephan Hunze, André‐Fabián Lasagni, Matthias Lütke, Achim Mahrle,
Steffan Nowotny, Jens Standfuß, Sebastian Thieme
LPP‐EUV Light Source Development for High Volume Manufacturing Lithography (OP4)
Hakaru Mizoguchi, Junichi Fujimoto, Takashi Saitou
Closing Plenary Session
Ways of Knowledge Transfer
The American Way of Knowledge Transfer (C102)
Jyoti Mazumder
The Brazilian Way of Knowledge Transfer (C104)
Walter Lindolfo Weingaertner
The Japanese Way of Knowledge Transfer (C105)
Hiroyuki Niino
Laser Materials Processing Conference
LMP 1: Pulsating Topics in Laser Materials Processing
Modeling of Keyhole Formation in Laser and Laser Arc Hybrid Welding Based on CFD Simulations (103)
Won‐Ik Cho, Muhammad Sohail, Suck‐Joo Na
Some Answers to Frequently Asked Questions and Open Issues of Laser Beam Cutting (104)
Dirk Petring, Frank Schneider, Norbert Wolf
LMP 2: Laser Drilling
Pulse Shaping During Laser Percussion Drilling by Using Fiber Laser Radiation (201)
Hermann Uchtmann, Jens Dietrich, Ingomar Kelbassa
Development of an Azimuthally Polarized All‐in‐One Pulsed CO2 Laser for Microdrilling (202)
Masamori Endo, Motoi Sasaki, Ryoji Koseki
Comparison of Keyhole Characteristics Obtained by Two Experimental Methods: The "Direct
Observation of Drilled Hole" Method and the "Sandwich" Method (203)
Simone Matteï, Jean‐Marie Jouvard, Massaud Mostafa, Iryna Tomashchuk, Henri Andrzejewski
Simulation of the Laser Drilling Process with the Constraint Natural Element Method (204)
Jeremie Girardot, L. Illoul, Philippe Lorong, Nicolas Ranc, Matthieu Schneider, Laurent Berthe, Veronique
Favier
LMP 3: Laser Metal Deposition I
Laser‐Assisted Development of New Ti‐Mo‐Zr Alloys for Biomedical Applications (301)
Carole Loable, Amelia Almeida, Rui Vilar
Residual Stress Control in DMD Process (302)
Hyung Min Chae, Jyoti Mazumder
3D Analysis of the Powder Flow of Laser Cladding Nozzles (305)
Rezak Mezari, Pascal Aubry, Thierry Malot, Kevin Verdier
A Verified Model of Transient and Residual Stresses in Laser Direct Metal Deposition (304)
Michael Vogel, Mushtaq Khan, Juansethi Ibarra‐Medina, Andrew J. Pinkerton, Narcisse N'Dri, Mustafa
Megahed
LMP 4: Laser Processing of CFRP
Remote Processing of Tailored Fiber Reinforced Lightweight Structures (401)
Annett Klotzbach, Andreas Fürst, Jan Hauptmann, Eckhard Beyer
Laser‐Based Hot‐Melt Bonding of CFRP and GFRP ‐ A Novel Joining Technology for Multi‐Material‐
Design (402)
Philipp Amend, Thomas Frick, Michael Schmidt
Experimental and Numerical Analysis of Laser Beam Transmission in Continuous Fiber Thermoplastic
Composites (403)
Mylène Deléglise, Benoît Cosson, Wolfgang Knapp
Influence of Different Ambient Media on the Laser Ablation Process of CFRP (404)
Christian Freitag, Volkher Onuseit, Rudolf Weber, Thomas Graf
Through Thickness Laser Joining of Continuous Glass Fiber Fabric Reinforcement (405)
Huade Tan, Gen Satoh, Y. Lawrence Yao
Advantages and Challenges of CFRP Laser Machining with ns‐Pulses (406)
Hagen Dittmar, Sven Bluemel, Peter Jaeschke, Uwe Stute, Dietmar Kracht
Latest Results in Laser Cutting of Carbon Fiber Reinforced Plastics (407)
Stephan Ziermann, Nicolai Speker, David Havrilla, Christian Koerber
Study of the Behaviour of Carbon‐Fiber‐Reinforced‐Polymer Composite Using Shock Produced by Laser
(410)
Laurent Berthe, Elise Gay, Michel Boustie, Michel Arrigoni
LMP 5: Laser Metal Deposition II
A Study of the Effect of Angle of Beam Incidence on Ytterbium Fiber Laser Cladding of Alloy 625 (501)
Gerald Bruck, Brandon Shinn, Ahmed Kamel
Comparison of Metal Matrix Nanocomposite and Microcomposite Layers on AISI H13 Tool Steel
Surface by Addition of TiC Nanoparticles and Microparticles by Laser Cladding (503)
Vicente Rouco, Mª Ángeles Montealegre, Pilar Rey, Gemma Castro, Marcos González, Jorge L. Arias
Calculating the Stress of Multi‐Track Formations in Induction‐Assisted Laser Cladding (504)
Frank Brueckner, Dietrich Lepski, Steffen Nowotny, Christoph Leyens, Eckhard Beyer
A Comparison of Hot Cracking Sensibility of Some Alloy 625 Powders on Laser Cladding (505)
Jonne Näkki, Jari Tuominen, Petri Vuoristo
Recent Developments in High Power Laser Cladding Techniques (507)
Jari Tuominen, Jonne Näkki, Henri Pajukoski, Tuomo Peltola, Petri Vuoristo
Structure of Ni‐Alloys Deposited by Laser Powder Deposition on Single Crystal Superalloy Substrates
(509)
Rui Vilar, Amelia Almeida, Edson Costa
LMP 6: Process Monitoring & Control
Process Monitoring and Control for Laser‐Based Thin Film Treatment (602)
Christian Vedder, Jochen Stollenwerk, Konrad Wissenbach
Detection of Faults in Laser Beam Welds by Near‐Infrared Camera Observation (604)
Friedhelm Dorsch, Holger Braun, Steffen Keßler, Dieter Pfitzner, Volker Rominger
Comprehensive Monitoring and Control of Laser Hybrid Arc Welding in Industrial Production (605)
Jan Karlsson, Alexander F. H. Kaplan
Diagnostics of the CO2‐Laser Cutting Process by Evaluating the Back‐Reflected Laser Power (606)
David Schindhelm, Rudolf Weber, Thomas Graf
Analysis of Coaxial Vision Systems for Real‐Time Z‐Height Control for Laser Cladding Process (607)
Rezak Mezari, Pascal Aubry, Thierry Malot, Kevin Verdier
The Study About the Algorithm of the Detecting Feature on Weld Images During Laser Welding
Processes (609)
Chen Xinsong, Duan Aiqin, Wang Bin
With Fieldbus Interfaces and Robust Design Laser Beam Monitoring Meets the Requirements of
Applications in Production (610)
Otto Märten, Stefan Wolf, Harald Schwede, Volker Brandl, Reinhard Kramer
LMP 7: Welding I
Electromagnetic Control of the Weld Pool Dynamics in Partial Penetration Laser Beam Welding of
Aluminium Alloys (701)
Vjaceslav Avilov, André Schneider, Marco Lammers, Andrey Gumenyuk, Michael Rethmeier
Pulsed Laser Weldability of Hastelloy C‐276: Corrosion‐Resistant Property (709)
Guangyi Ma, Mengxue Wu, Shibo Liu, Dongjiang Wu
Twinquasi ‐ A New Method for Quasi‐Simultaneous Laser Welding of Polymers (706)
Saara Ruotsalainen, Petri Laakso, Matti Manninen, Tuomas Purtonen, Veli Kujanpää, Antti Salminen
Controllable Beam Intensity Profile for the Tasks of Laser Material Processing (707)
Alexander Laskin, Vadim Laskin
LMP 8: Laser Cutting
A Technical and Commercial Comparison of Fiber Laser and CO2 Laser Cutting (801)
John Powell, Alexander F.H. Kaplan
Impact of Thermal Focal Shift on Laser Cutting Processes with High Brightness Lasers (802)
Sasia Eiselen, Heiko Zapf, Eugenia Mantel, Lukas Hofmann, Michael Schmidt
Identification and Characterization of Analogies of Remote Fusion Cutting Processes Using Different
Beam Sources (803)
Matthias Luetke, Alexander Wagner, Andreas Wetzig, Eckhard Beyer
TEA CO2 Laser Machining of Carbon Fiber‐Reinforced Polymer Composites (808)
Adel Salama, Paul Mativenga, Lin Li
Mass and Momentum Transfer of Oxygen Jet to the Melt in Laser Cutting of Mild Steel (805)
Grigoriy Ermolaev, Alexander Zaitsev
Process‐Reliable & Cost‐Effective Laser Materials Processing (807)
Marco Lentjes, Peter Bruns, Michael Voss, Klaus Reinecke, Vitalij Lissotschenko
LMP 9: High Brightness Lasers & Systems
Fiber‐Coupled High Power Stabilized Green Laser for Material Processing Applications (902)
Berthold Burghardt, Johannes Richter, Nick Hay, Yili Guo, Ian Baker, Stuart Bashford, Young Kwon, Jong
Kab Park, Hans‐Juergen Kahlert
High Power Disk Lasers ‐ Advances & Applications (903)
David Havrilla, Tracey Ryba, Marco Holzer
102 W All‐Fiber Broadband Superfluorescent Source Based on Ytterbium‐Doped Double‐Cladding
Fibers (904)
Yi Cao, Jiang Liu, Ke Wang, Pu Wang
Investigation of Thermal Lensing Time Constants in Laser Processing Optics (905)
Christiane Thiel, Rudolf Weber, Axel Hess, Thomas Graf
UV Line Beam Laser Optics for Material Processing (906)
Denis Bolshukhin, Berthold Burghardt, Nick Hay, Alexey Rodin, Yili Guo, Young Kwon, Jong Kab Park,
Hans‐Juergen Kahlert
All Passive Optical Design Laser Beam Analyzer for High Power CO2 Lasers (907)
Michael Scaggs, Gil Haas
LMP 10: Welding II
The Influence of the Pressure of Ar Shielding Gas on the Keyhole Behavior During CO2 Laser Welding
of TA15 (1001)
Duan Aiqin, Gong Shuili, Huang Song
New Hot Cracking Criterion for Laser Welding in Close‐Edge Position (1003)
Peter Stritt, Rudolf Weber, Thomas Graf, Steffen Mueller, Jan‐Philipp Weberpals
A Comparative Study Between the Low Carbon Steel and the Galvanized Steel Welding (1005)
Seung Hwan Lee, Jyoti Mazumder
LMP 11: Processing of Dissimilar Materials
Local Laser Joining of Glass and Silicon (1101)
Assi Hansen, Tiina Amberla, Yasuhiro Okamoto, Isamu Miyamoto
Dissimilar Metal Joining of Mg Alloy to Al Alloy by Laser Brazing Process (1103)
Sook Hwan Kim, Y. Norman Zhou, LiQun Li, Ali Nasin
LMP 12: Laser Surface Modification I
Production of Silver Conductive Paths by Laser Processing (1201)
Melanie Meixner, Jochen Stollenwerk, Konrad Wissenbach
Study on Cavitation Resistance and Wear Property of NiAl‐VC Laser Alloyed Layer on TC4 (1202)
Jianhua Yao, Bo Ren, Qunli Zhang
Generic Parameters Governing the Biofunctionality of Laser Surface Engineered Nylon 6,6 (1204)
David Waugh, Jonathan Lawrence
Process Map Approach to Laser Transformation Hardening of Carbon Steels (1205)
Hyungson Ki, Sangwoo So
Laser Hardening of Gear Wheels (1206)
Stanislav Nemecek, Tomas Muzik, Michal Misek
LMP 13: Hybrid & Combination Processes I
Laser Guided Double Tungsten Inert Gas Welding of Aluminium (1301)
Alexander Barroi, Ryan Knill, Jörg Hermsdorf, Stefan Kaierle, Ludger Overmeyer
Fundamental Investigations and a System Technology for Laser‐Assisted Milling of Titanium Alloys
(1306)
Robert Wiedenmann, Michael Zaeh
A Comparative Study of Laser, CMT, Laser‐Pulse MIG Hybrid and Laser‐CMT Hybrid Welded Aluminium
Alloy (1304)
Chen Zhang, Ming Gao, Geng Li, Xiaoyan Zeng
Development and Experimental Analysis of Laser‐Assisted Plasma Arc Welding (1302)
Achim Mahrle, Michael Schnick, Sascha Rose, Thomas Pinder, Eckhard Beyer, Uwe Füssel
LMP 14: Welding III
Zero‐Gap Laser Welding of Zinc Coated Steels in a Lap Joint Configuration (1402)
Shanglu Yang, Jeff Wang, Blair Carlson, Jing Zhang
Investigation of the Keyhole in Laser Welding of Different Joint Geometries by Means of X‐Ray
Videography (1403)
Mikko Vänskä, Felix Abt, Rudolf Weber, Antti Salminen, Thomas Graf
Development and Application of the 10 kW Fiber Laser Welding System (1404)
Yosuke Yamazaki, Akikazu Kitagawa
Position Welding of 960 MPa Ultra‐High‐Strength Steel (1407)
Jukka Siltanen, Sakari Tihinen
LMP 15: Hybrid & Combination Processes II
Narrow Gap Laser Welding of Thick Section Stainless Steel (1501)
Ahmed S. Elmesalamy, Lin Li, John A. Francis
Laser‐Arc Hybrid Welding of Thick‐Section Mild Steel Plates: Microstructure and Performances of the
Beads (1502)
Geng Li, Ming Gao, Chen Zhang, Xiaoyan Zeng
Laser‐GMA Hybrid Welding of Direct Quenched Steel in Lap Joint Configuration ‐ A Preliminary Study
(1503)
Miikka Karhu, Veli Kujanpää, Kalervo Leino, Jukka Siltanen
Laser GMA Hybrid Welding for Thick Wall Applications of Pipeline Steel with the Grade X70 (1505)
Oliver Seffer, Jasmin Lindner, André Springer, Stefan Kaierle, Volker Wesling, Heinz Haferkamp
LMP 16: Laser Metal Deposition III
Challenges in the Design of Portable Laser Repair Systems (1601)
Andrew Nissly, Edward Reutzel, Todd Palmer
Adaptive Shape Control of Laser Metal Deposition by Adjusting Weld Pool Size (1602)
Masanori Miyagi, Takeshi Tsukamoto, Hirotsugu Kawanaka
A Novel Method of Pulsed Laser‐Cladding for Effective Control of Melting of WC Particulates in Nicr‐
WC Composite Coatings (1603)
Manish Tak, S. M. Shariff, Vikram Sake, G. Padmanabham
LMP 17: Welding IV
Effect of Gas Shielding and Heat Input on Autogenous Welding of Duplex Stainless Steel (1701)
Antti Salminen, Elin Westin, Esa Lappalainen, Anna Unt
High‐Quality Laser Welding of Copper Using Appropriate Power Modulation (1702)
Andreas Heider, Rudolf Weber, Thomas Graf
Studying the Effect of Laser Welding Parameters on the Quality of ZEK100 Magnesium Alloy Sheets in
Lap Joint Configuration (1706)
Masoud Harooni, Fanrong Kong, Blair Carlson, Radovan Kovacevic
Meeting Weld Quality Criteria When Laser Welding Ni‐Based Alloy 718 (1707)
Ali Khan, Paul Hilton, Jon Blackburn, Chris Allen
Influence of Surface Condition in Fiber Laser Welding of Pure Copper (1708)
Hui‐Chi Chen, Guijun Bi, Mui Ling Sharon Nai, Jun Wei
Formation Mechanism of Process Instabilities and Strategies to Improve Welding Quality (1709)
Volker Rominger, Thomas Harrer, Steffen Keßler, Holger Braun, Friedhelm Dorsch, Felix Abt, Michael
Jarwitz, Andreas Heider, Rudolf Weber, Thomas Graf
LMP 18: Laser Surface Modification II
Advances in Large Scale Laser Paint Stripping (1801)
Stan Ream
Single‐Pulse Control of Ablation by Monitoring Response of Target Material (1802)
Chen‐Hsiung Cheng, Sergey Broude
Analysis of Material Removal on Metallic Materials by Pulsed Fiber Lasers (1803)
Mark Brodsky, Jack Gabzdyl, Ken Dzurko
Laser Cleaning of Graffiti from Building Stone Using High Power Diode Laser (1804)
J. Penide, Felix Quintero, Antonio Riveiro, Amadeo Sánchez‐Castillo, Rafael Comesaña, Jesus del Val,
Fernando Lusquiños, Juan Pou
Characterization of the Corrosion Performance of Aluminium Laser Alloyed with Stellite‐6 and
Zirconium Powders (1805)
Given Rambau, Patricia Popoola, Tebogo Mathebula, Sisa Pityana
Characterization of Protective Layers Produced by Laser Treatment (1806)
Václav Ocelík, Ismail Hemmati, Jeff Th.M. De Hosson
Surface Glazing of Concrete Using Lasers for Protection and Decommissioning (1807)
Jonathan Lawrence
Microstructure Evaluation of A356 Aluminium Alloy Laser Surface Alloyed with Ni‐Ti‐SiC and Ni‐Ti‐C
(1808)
Clayton D' Amato, Maurizio Fenech, Joseph Buhagiar, John C. Betts
On the Interaction of the Particles of Tantalum with a Substrate of Copper in the Cold Spray Bonding
Process (1809)
Anass Nifa, Laurent Berthe, Michel Boustie, Laure‐Line Descurninges, Michel Jeandin, Jacky Bénier,
Patrick Mercier
LMP 19: Modelling & Simulation
Three‐Phase 3D Modelling of a Laser Cutting Process Using Smoothed Particle Hydrodynamics (SPH)
(1901)
Noorhafiza Muhammad, Benedict Rogers, Lin Li
Numerical Simulation of Cut Kerf Formation Under the Influence of CO2 and Fiber Lasers (1902)
Zaitsev Alexander, Gurin Alexei, Grigoriy Ermolaev
Modelling of the Cutting Velocity Influence on the Kerf Front During Laser Cutting Process (1903)
El‐Hachemi Amara, Remy Fabbro, Koji Hirano
Thermohydraulic Aspects in Laser Welding and Cutting Processes (1904)
Toshiharu Muramatsu
The Numerical Simulation of Heat Transfer During a Hybrid Laser‐MIG Welding of Duplex Steel (1905)
Issam Bendaoud, Simone Mattei, Eugen Cicala, Iryna Tomashchuk, Henri Andrzejewski, Pierre
Sallamand, Alexandre Mathieu, Amelie Fanica
Study on Temperature Dependence of Recoil Pressure Near the Boiling Temperature ‐ Towards Better
Modeling and Simulation (1909)
Koji Hirano, Remy Fabbro, Maryse Muller
Modeling Keyhole and Weld Pool Dynamics of Laser Welding Under Variable Ambient Pressure (1906)
Shengyong Pang, Koji Hirano, Remy Fabbro, Tao Jiang
Towards a Quantitative Model for Porosity Predication in CO2 Laser Welding of Titanium Alloy Sheets
(1908)
Shengyong Pang, Weidong Chen, Lunji Hu
Laser Microprocessing Conference
LMF 2: Medical Devices and Biomedical Applications
Variation of Biocompatibility of Titanium Dioxide Film by Femtosecond Laser Irradiation (M201)
Togo Shinonaga, Masahiro Tsukamoto, Naoto Horigutchi, Yuichiro Ito, Akiko Nagai, Kimihiro Yamashita,
Takao Hanawa, Nobuhiro Matsushita, Xie Guoqiang, Masanari Takahashi, Nobuyuki Abe
fs Laser Surface Processing of Platinum (M202)
Stephen W. Brown, Andrew E. Fisk, Edward W. (Ted) Reutzel
Effect of Laser Induced Crystallinity Modification on Biodegradation Profile of Poly(L‐Lactic Acid)
(M204)
Shan‐Ting Hsu, Huade Tan, Y. Lawrence Yao
LMF 3: Innovative Laser Optics
Multiple NUV Beam Internal Structuring of Materials Using a Spatial Light Modulator (M301)
Dun Liu, Zheng Kuang, Walter Perrie, Eamonn Fearon, Stuart Edwardson, Geoff Dearden, Ken Watkins
Picosecond Laser Beam Shaping Using a Spatial Light Modulator (M303)
Dun Liu, Walter Perrie, Leigh Mellor, Zheng Kuang, Eamonn Fearon, Stuart Edwardson, Geoff Dearden,
Ken Watkins
Creating Round and Square Flattop Laser Spots in Microprocessing Systems with Scanning Optics
(M305)
Alexander Laskin, Vadim Laskin
Increasing the Productivity of Femtosecond Laser Using Spatial Light Modulator (M306)
Petri Laakso, Martti Silvennoinen, Raimo Penttilä, Jarno Kaakkunen, Kimmo PäIväsaari, Ilkka Vanttaja
An Aspherical Reflecting Focusing Method for Direct Semiconductor Laser (M311)
Xubao Wang, Qinggai Mi, Dongyu Liu
Advances in Ultra Short Pulsed Parallel Processing Using a Spatial Light Modulator (M308)
Stuart P. Edwardson, Zheng Kuang, Dun Liu, Walter Perrie, Geoff Dearden, Ken Watkins
The Impact of Graphite Coating and Wavelength on Picosecond Laser Machining of Optical Glasses
(M309)
Krystian L. Wlodarczyk, Frank Albri, Robert R. J. Maier, Nick J. Weston, Duncan P. Hand
Xinghua Li, Sean M. Garner
LMF 4: Microwelding
Welding Characteristics of Foturan Glass Using Ultrashort Laser Pulses (M401)
Isamu Miyamoto, Kristian Cvecek, Yasuhiro Okamoto, Michael Schmidt, Henry Helvajian
Novel Fusion Welding Technology of Si/Glass Using Ultrashort Laser Pulses with High Pulse Repetition
Rates (M402)
Isamu Miyamoto, Yashuhiro Okamoto, Assi Hansen, Tiina Amberla, Jorma Vihinen, Jarno Kangastupa
Examinations on Laser‐Welded Joints of Ultra‐Thin Metallic Foils (M404)
Andreas Patschger, Matthias Hild, Jean Pierre Bergmann, Jens Bliedtner
Micro‐Laser‐GMA Hybrid Welding ‐ The Advancement from Macro to Micro Range (M406)
Uwe Reisgen, Simon Olschok, Stefan Jakobs, Michael Mavany
LMF 5: Processing of Transparent and Brittle Materials
Singulation of Sapphire Substrate with High Aspect Ratio Internal Modification by Sub‐Nanosecond
Pulsed Fiber Laser (M502)
Yasuhiro Okamoto, Kenta Takahashi, Akira Okada
The Impact of Thermal Strain Rate on Laser Bonding of Polymer Films (M506)
Colin Dowding
Laser Transmission Welding with Part Adapted Temperature Fields (M507)
Martin Devrient, Verena Wippo, Peter Jaeschke, Uwe Stute, Thomas Frick, Heinz Haferkamp, Michael
Schmidt
Diagnostic and Simulation of ps‐Laser Glass Cutting (M504)
Urs Eppelt, Simone Russ, Claudia Hartmann, Mingying Sun, Christof Siebert, Wolfgang Schulz
CO2 Laser Free‐Shape Cutting of Flexible Glass Substrates (M505)
Xinghua Li, Sean M. Garner
LMF 6: Thin Film Processing
Selective Femtosecond Laser Structuring of a Platinum/ Tantalum Pentoxide Thin Film Layer System
by Induced Laser Ablation Investigated with Pump‐Probe Microscopy (M601)
Janosch Rosenberger, Stephan Rapp, Matthias Domke, Gerhard Heise, Heinz P. Huber
Line Beam Laser Lift‐Off Approach for Sapphire Removal (M602)
Ralph Delmdahl, Rainer Paetzel, Jan Brune, Rolf Senczuk, Christian Gossler, Ruediger Moser, Michael
Kunzer, Ulrich Schwarz
Evaluation of Damaged Region at the Groove Edge of TCO Film in Pulsed Fiber Laser Processing (M603)
Yasuhiro Okamoto, Naoya Takahashi, Shin‐ichi Nakashiba, Tomokazu Sakagawa, Akira Okada
Ultrafast Movies of Thin Metal Film Ablation with Ultra‐Short Laser Pulses (M604)
Matthias Domke, Stephan Rapp, Gerhard Heise, Heinz P. Huber
Mechanism of Selective Removal of Transparent Conductive Oxide Layers: Femtosecond vs.
Picosecond‐ Laser Pulse Ablation (M605)
Victor V. Matylitsky, Heinz Huber, Juerg Aus der Au
LMF 7: Surface Modification I
Comparison Study of Sub Microstructure Generation on Metals Between Femtosecond Ti:Sa Laser and
High Repetition Yb Doped Fiber Laser (M702)
Marc Faucon, Hélène Desrus, John Lopez, Rainer Kling
Femtosecond Laser Ablation of Dentin (M703)
Sandra Alves, Rui Vilar, Vitor Oliveira, Liliana Cangueiro, Amelia Almeida
Laser Surface Texturing of Bioactive Materials (M706)
Antonio Riveiro, R. Soto, Rafael Comesaña, Mohamed Boutinguiza, Jesus del Val, Felix Quintero,
Fernando Lusquiños, Juan Pou
LMF 8: Lasers in Energy Generation and Storage
Laser Scribing of ITO/ZnO Thin Films on Flexible PET‐Foil for Roll‐to‐Roll Production of Polymer Solar
Cells (M802)
Susana Abreu Fernandes, Benjamin Schöps, Kerstin Kowalick, Shizhou Xiao, Ralf Nett, Evgeny Gurevich,
Matthias Schindler, Andreas Ostendorf
Laser Cleaning of the Output Window in a Laser Ignition System for Gas Turbines (M803)
Jonathan Griffiths, Jonathan Lawrence
Investigation of Different Laser Cutting Strategies for Sizing of Li‐Ion Battery Electrodes (M804)
Rahul Patwa, Hans Herfurth, Stefan Heinemann, Jyoti Mazumder, Dongkyoung Lee
Joining of Lithium‐Ion Batteries Using Laser Beam Welding: Electrical Losses of Welded Aluminum and
Copper Joints (M805)
Philipp A. Schmidt, Markus Schweier, Michael F. Zaeh
LMF 9: Surface Modification II
Phase Change Writing in Ge‐Sb‐Te Film with Ultraviolet Laser (M901)
Weiping Zhou, Furong Liu, Chao He, Yuhong Wan, Jinmin Chen
Laser Precision Surface Sculpting of 2D Diffractive Optical Structures on Metals (M903)
Stephanie Giet, Andrew Dunn, Marcus Ardron, Matthew Kidd, Robert Maier, Nick Weston, Duncan Hand
Pulsewidth Dependence of Laser‐Induced Periodic Surface Structures Using a Picosecond Fiber Laser
(M905)
Tim D. Gerke, Brian Baird
Improving the Wettability on ZnO and ZrO2 Single Crystal Surface by Laser Irradiation (M906)
Yijian Jiang, Yan Zhao, Sijing Xie
LMF 10: Modeling and Physical Interactions
Infrared‐Visible Light Conversion Using DCM Dye Micrograins Embedded in a Resin Sheet and
Application to an IR Sensor Card (M1001)
Tadashi Kawazoe, Tohru Fujita, Hiroyasu Fujiwara, Minoru Niigaki, Motoichi Ohtsu
Characterisation of Interaction Phenomena in High Repetition Rate Femtosecond Laser Ablation of
Metals (M1003)
Joerg Schille, Lutz Schneider, Lars Hartwig, Udo Loeschner, Robby Ebert, Patricia Scully, Nicholas
Goddard, Horst Exner
From ps to fs: Dependence of the Material Removal Rate and the Surface Quality on the Pulse
Duration for Metals, Semiconductors and Oxides (M1004)
Beat Neuenschwander, Beat Jaeggi, Marc Schmid
Non‐Dimensional Evaluation of Nonlinear Absorptivity in Internal Modification of Glass Using USLP
(M1005)
Isamu Miyamoto, Kristian Cvecek, Michael Schmidt
Effects of Polarization on Laser Diffusion and Materials Modification (M1006)
Sen‐Yong Chen, Othmane Benafan, Aravinda Kar, Raj Vaidyanathan
LMF 11: Monitoring and Detection
Real Time Surface Tracking System in Laser Microprocessing (M1102)
Ville Hautala, Antti Määttänen, Jorma Vihinen
1.3µM‐Band Si Photodetectors with Optical Gains Fabricated by Dressed Photon Assisted Annealing
(M1105)
Hajime Tanaka, Tadashi Kawazoe, Motoichi Ohtsu
Designer Pulses for Precise Machining of Silicon ‐ A Step Towards Photonic Compositions (M1104)
Krste Pangovski, William O'Neill, Peh Siong Teh, Shaif'ul Alam, David Richardson, Ali Gökhan Demir
Analysis of Nanosecond Laser Ablation of Aluminum With and Without Phase Explosion in Air and
Water (M1103)
Yunfeng Cao, Xin Zhao, Yung Shin
LMF 12: Microprocessing and Drilling
Trend Analysis of Laser Micromachining (M1201)
Wenwu Zhang
Dual Beam Laser Grooving of CFRP by Pulsed Lasers (M1202)
Masayuki Fujita, Toshihiro Somekawa, Takumi Ozaki, Minoru Yoshida, Noriaki Miyanaga
Potentials for Lasers in CFRP Production (M1203)
Charly Loumena, Minh‐Hoang Nguyen, John Lopez, Rainer Kling
Heat Accumulation in Short‐Pulse Laser Processing of CFRP (M1204)
Rudolf Weber, Christian Freitag, Margit Hafner, Volkher Onuseit, Peter Berger, Thomas Graf
Laser‐Beam Helical Drilling of High Quality Micro Holes (M1205)
Christian Fornaroli, Jens Holtkamp, Arnold Gillner
High Precision and High Throughput Surface Structuring by Synchronizing Mechanical Axes with an
Ultra Short Pulsed Laser System in MOPA Arrangement (M1207)
Beat Jaeggi, Beat Neuenschwander, Urs Hunziker, Joseph Zuercher, Thomas Meier, Markus
Zimmermann, Guido Hennig
Pulsed Laser Cutting of Bright Metals (M1208)
Paul Harrison, Jack Gabzdyl
LMF 13: Advances in Laser Sources
Hundreds of Milliwatts Super‐Continuum Generation in All‐Fiber Laser (M1302)
Chang Sun, Tingwu Ge, Jingjing Dai, Feng Yu, Zhiyong Wang
Frequency Shifting of High Intensity Picosecond Lasers by Stimulated Raman Scattering (M1303)
Xu Yang, Chen Meng, Li Zhengwei, Chen Liyuan, Yang Chao, Li Gang
Investigating PCB Processing Using Q‐Switched DPSS Nanosecond Green Laser (M1306)
Ashwini Tamhankar, Rajesh Patel
High Power 532nm Square Beam Delivery (M1307)
Andrew A. Chesworth
High Pulse Energy, High Beam Quality Q‐Switched MOPA Laser at 500Hz (M1308)
Zhenxu Bai, Mingliang Long, Liyuan Chen, Meng Chen, Gang Li
High Average Power, High Energy Femtosecond Regenerative Amplifiers (M1309)
Martin Delaigue, Robert Braunschweig, Clemens Hönninger, Eric Mottay
Nanomanufacturing Conference
Nano 1: Laser Micro/Nano Processing
Femtosecond Laser Inscribed Fiber Devices and Their Sensing Applications (N101)
Qiying Chen, Ping Lu, Liqiu Men
Opto‐Hydrodynamic Processing of Materials Using Microdroplets (N102)
Daehwan Ahn, Changho Seo, Dongsik Kim
Micromachining Through Silicon Substrates by Ultrafast Laser at 1552 nm (N103)
Yoshiro Ito, Yuichi Morita, Hiroki Sakashita, Ryosuke Suzuki, Rie Tanabe, Hidemasa Sakurai, Kozo Tada
Tuesday, September 25, 2012
Nano 2: Laser‐Material Interactions at Nanoscales
Nonequilibrium Laser Synthesis and Real‐Time Diagnostics of Carbon Nanomaterial Growth (N201)
David B. Geohegan, Alex A. Puretzky, Christopher M. Rouleau, Murari Regmi, Jeremy J. Jackson, Jason D.
Readle, Karren More, Gyula Eres, Gerd Duscher
Efficient Laser Coupling into Plasmonic Nanoantenna Arrays for Fabrication and Characterization of
Sensitive Infrared Bolometers (N203)
Masoud Mahjouri‐Samani, Yunshen Zhou, Wei Xiong, Xiangnan He, Paul Hilger, Yongfeng Lu
Nano 3: Thermal Characterization and Processing at Micro/Nanoscales
Far‐Field Nanoscale Thermal and Structure Imaging (N301)
Xiaoduan Tang, Shen Xu, Xinwei Wang
Role of Metal/Matrix Interfaces in the Thermal Management of Metal‐Carbon Composites (N302)
Jean‐François Silvain, Jean‐Marc Heintz, Thomas Guillemet, Yongfeng Lu
Evaluation of Thermal Resistance at the Silicon/Diamond Interface Through Infrared Photothermal
Radiometry (N303)
Thomas Guillemet, Jean‐Luc Battaglia, Andrzej Kusiak, Andrea Cappella, Jean‐Marc Heintz, Namas
Chandra, Jean‐François Silvain, Yongfeng Lu
Fabrication of Micro‐Nano Hierarchical Cu Structures on Engineering Substrate by Hybrid Laser
Approach and Their Application to Photodegradation of Methyl Orange Under Visible Light (N304)
Minlin Zhong, Changsheng Dong, Ting Huang
Nano 4: Laser Nanolithogrpahy and Nanostructuring
Plasmon‐Assisted Nanolithography Exposed by Femtosecond Laser Beam Through Gold
Nanostructured Photomasks (N401)
Kosei Ueno, Hiroaki Misawa
Three‐Dimensional Micro/Nano‐Fabrication by Integration of Additive and Subtractive Femtosecond‐
Laser Direct Writing Processes (N404)
Wei Xiong, Yunshen Zhou, Xiangnan He, Yang Gao, Masoud Mahjouri‐Samani, Tommaso Baldacchini,
Yongfeng Lu
Beam Shaping Optics to Improve Holographic and Interferometric Nanomanufacturing Techniques
(N405)
Alexander Laskin, Vadim Laskin
Nano 5: Laser Applications in Flexible Electronics
An Experimental Investigation into the Laser Sintering Process of Cu Nanoparticle Based Ink on
Polymer Substrates for Printed Electronics (N502)
Juan Carlos Hernandez‐Castaneda, Gary Ka Lai Ng, Lok Boon Keng, H.Y. Zheng
Nano‐Needle Fabrication Based on Optical Vortex Laser Ablation (N503)
Kohei Toyoda, Katsuhiko Miyamoto, Nobuyuki Aoki, Takashige Omatsu
Poster Presentation Gallery
Delamination Induced by Laser Drilling on a Cobalt Base Superalloy (P104)
Jeremie Girardot, Matthieu Schneider, Laurent Berthe, Veronique Favier
Diode‐Pumped Nanosecond Nd:Yag Laser Micromachining of Ti‐3Al‐2.5V Tubes for Fatigue Life Study
(P105)
Yaomin Lin, Mool Gupta
Effects of Laser‐Peening Parameters on Plastic Deformation of SUS316L (P120)
Kohei Mizuta, Miho Tsuyama, Makoto Takahaski, Toshiya Shibayanagi, Hitoshi Nakano
Laser Cladding with Coaxial Wire Feeding (P124)
Pajukoski Henri, Näkki Jonne, Thieme Sebastian, Tuominen Jari, Nowotny Steffen, Vuoristo Petri
Corrosion Resistant Laser Coatings for Hydraulic Piston Rods (P126)
Jari Tuominen, Jonne Näkki, Juha Junkala, Juha Miettinen, Tuomo Peltola, Petri Vuoristo
Thermal and Mechanical Modeling of Single Metallic Powder Layer for Laser Micro Sintering (P128)
Jie Yin, Haihong Zhu, Linda Ke, Panpan Hu, Chongwen He, Hong Chen, Duluo Zuo
Laser‐Assisted Manufacturing of Porous Metallic Structures (P130)
Jesus del Val, Antonio Riveiro, Rafael Comesaña, Fernando Lusquiños, Mohamed Boutinguiza, Felix
Quintero, Juan Pou
Analysis of Process Parameters on Melt Pool Stability in Powder Bed Laser Melting (P131)
Pascal Aubry, Clara Salvetti
Analysis and Simulation of the Effects of the Melt Pool Flow During Laser Deposition of a Multiphase
Material (P133)
Mushtaq Khan, Michael Vogel, Juansethi Ibarra‐Medina, Andrew J. Pinkerton, Narcisse N'Dri, Mustafa
Megahed
Incorporation of CNT‐Yarns into Metals by Laser Melting of Powder (P135)
Alexander F. H. Kaplan, Alexander Soldatov, Maxime Noël, Peter Norman, Ingemar Eriksson, John
Powell, Shaoli Fang, Ray Baughman
Preliminary Study of Laser Deep Machining (P143)
Emilie Le Guen, Laurent Berthe, Leila Guenad, Nicolas Jardin
Numerical Studies of Laser Cutting of an Anode for Lithium‐Ion Batteries (P144)
Dongkyoung Lee, Jyotirmoy Mazumder
Comparative Study on Microstructuring of Steel Using Pico‐ and Femtosecond Laser Pulses (P145)
Peter Lickschat, Joerg Schille, M. Mueller, Steffen Weissmantel, G. Reisse
Influence of Surrounding Gas Type and Pressure Condition on Micro‐Drilling of Silicon Carbide by
Harmonics of Nd:YAG Laser (P146)
Yasuhiro Okamoto, Shin Urushibata, Akira Okada, Tomokazu Sakagawa, Shin‐ichi Nakashiba
High Quality and High Speed Cutting of Al2O3 Substrate with Single Mode Fiber Laser (P148)
Toshiaki Sakai, Akira Fujisaki, Kousuke Kashiwagi, Takashi Kayahara, Takashi Shigematsu
Suitable Processing Conditions Determined from the Standpoint of Residual Strain in Laser Scribing of
Glass (P152)
Keisuke Yahata, Etsuji Ohmura, Seiji Shimizu, Masanao Murakami
Comparison of Laser Glass Cutting Processes Using ps and fs Lasers (P153)
Cheon Ya Seong, Hyeong Uk Kim, Nam Seong Kim, Byoung Cheol Kim
Optimizing Ultrashort Laser Pulses for High‐Precision and High‐Performance Micromachining Process
(P155)
Hoon Jeong, Dongjoo Lee
Thin‐Film Laser Scribing Processes Using ns, ps, and fs Pulses in CIGS Solar Cell Fabrication (P157)
Hwang Jin Lee, Nam Seong Kim, Hong Lee, Byoung Cheol Kim
A Thermal Investigation on Conductive Silver Ink Tracks Cured on Flexible Substrates by Repeating
Irradiations of Nd:Yag Laser at the Wavelength of 532 nm (P161)
Liwei Fu, Shuo Shang, Eamonn Fearon, Walter Perrie, Stuart Edwardson, Geoff Dearden, Ken Watkins
Variation of Photocatalytic Activity in Titanium Dioxide Film Modified by Femtosecond Laser
Irradiation (P162)
Naoto Horiguchi, Masahiro Tsukamoto, Minoru Yoshida, Togo Shinonaga, Masanari Takahashi, Masayuki
Fujita, Nobuyuki Abe
Laser Welding of Seal Tubes for the Instrumented Fuel Irradiation Test (P168)
Soo‐Sung Kim, Ki‐Hwan Kim, Ho‐Jin Ryu, Yoon‐Sang Lee, Jon‐Man Park
Study on Ultrafast Imaging of the Silicon Surface Ablated by a Single Nanosecond Laser Pulse (P169)
Peng Gu, Haiying Song, Song Liu, Xiangming Dong, Qini Ge, Shibing Liu
Research on Improving of Cut Surface Quality of Laser‐Cut Fine Ceramics (P170)
Lingfei Ji, Xiaochuan Chen, Yinzhou Yan, Yong Bao, Yijian Jiang
Enhancing the Strength of Titanium Alloys by TiN Surface Network Reinforcement (P171)
Dennis K. C. Lo, On‐Ki Chan, Hau‐Chung Man
High Efficiency Laser Oxygen Thick Section Cutting of Mild Steels Using Disk Laser (P172)
Tao Zhang, Martin Sparkes, Markus Gross, Bill O'Neill
top related