gyrotedders gf 1001 series - interstatetractor · 4 pivoting headstock: true mobility the pivoting...
Post on 22-Aug-2018
240 Views
Preview:
TRANSCRIPT
GyroteddersGF 1001 Series
E F F E C T I V E T E D D I N G !
KUHN, the world leader in rotary tedders, continues to provide farmerswith Gyrotedders that aid in increasingproductivity while reducing losses inthe field.
KUHN mounted, semi-mounted or trailed Gyrotedders offer the following benefits:
• Preserve the nutritional value of haywith gentle tedding – higher qualityhay that ultimately increases profits.
• Expand productivity with extendedworking widths and high capacitywhile maintaining manoeuvrability –reduce operating costs in the field.
• Benefit from a long list of useful innovations such as DIGIDRIVE®
multiple finger couplings — increasethe service life of the machine andreduce maintenance costs.
• Quality and reliability from the world’s leading manufacturer of rotary tedders – solid support anda high resale value.
KUHN offers solutions for tedding while meeting your requirements in terms of:
KUHN Gyrotedders
COST REDUCTIONS GOOD PRACTICES
COMFORT – QUALITY OF LIFE PEACE OF MIND - SERVICESPROXIMITY – ADVICES
3
Minimised lift requirement
The compact hitch design considerablyreduces the distance from the tractor tothe implement’s centre of gravity. Lowhorsepower tractors can be used with aminimum of front ballast.With the tines safely pointed inward thetransport width is reduced to 2.17 m (7’1’’).
• Specially designed for low power tractors, these tedders are ideal for use on small or hillyareas.
• An operating width of 3.70 m or 4.20 m and nevertheless very compact for transport, these machines can access any field corner with great ease.
• The small diameter rotors ensure impeccable tedding quality for fast drying and quality forage.
Small tedders with all the features of large KUHN tedders
GyroteddersGF 3701 MH - GF 4201 MH
Working width (DIN) (m/ft) 4.20/13’9’’
Number of rotors 4
Number of tine arms per rotor 6
Rotor drive Through DIGIDRIVE®-coupling
Headstock Pivoting
Tyres 15 x 6.00-6 Balloon
Weight (kg/lbs) 452
GF 3701 GF 4201 MHS P E C I F I C AT I O N S3.70/12’2’’
4
4
Fixed
327
Easy folding and unfolding
In order to change from the working position to the transport position, theouter rotors are raised manually to thevertical position.
4
Pivoting headstock: true mobility
The pivoting headstock provides flexibili-ty and manoeuvrability. - Even while turning, the tedder is always
in line with the cut crop.- When raised, the hitch automatically
centres and locks the implement in linewith the tractor.
Comfort and safety gohand in hand
Folding and extending of the outer rotorsis controlled hydraulically from the tractor. Transport locks are also released from thetractor using a release cord.
Rotors pivot by 180°
Once raised, the rotors lock automati-cally.- For additional security and reduced
storage requirements, rotors pivot 180°.- With the tines safely pointed inward the
overall transport width is also reduced.
Multi-purpose wheels
- Wheel height adjustment is through aneccentric. The turn of a simple handlealters the angle of the machine to bestsuit the density and stubble height of thecrop.
- Wheels are also capable of being turned manually for oblique operation,as at the edges of fields and alonghedges.
5
Three swaths in a single pass
With a width of 5 m (16’5”), the GF 5001 MH and T Gyrotedders are recommended foruse with a 2 m (6’7”) disc mower where three swaths are tedded without the tractor running over the crop. Two windrows from a 3 to 3.5 m (9’10” to 11’6”) mower condi-tioner can be tedded by running between the windrows.The GF 5001 MH and T can also be used to ted two windrows from a 3 m mower.
Simple and economical
GyroteddersGF 5001 MH/T - GF 7001 T
Working width (DIN) (m/ft)
Number of rotors
Number of tine arms per rotor 6
Rotor drive Through DIGIDRIVE®- coupling
Headstock Drawbar towed hitch
Tyres 15 x 6.00 - 6 Ballon
Oblique position setting Manual
Weight (kg/lbs)
GF 5001 MH GF 5001 T GF 7001 TS P E C I F I C AT I O N S
• Fitted with 4 or 6 rotors,the GF 5001 / 7001 offerone of the most interes-ting price/working widthratio,
• 6 arms per rotor for ahigh output especially inlong and dense forage
• forged finger DIGIDRIVE®
couplings,
• simple and quick adjust-ment of the rotor angleto suit the density of thecrop.
5.00/16’5’’
4
Pivoting
513/1130
5.00/16’5’’
4
448/986
6.90/22’8’’
6
655/1444
6
GF 5001 T/7001 T: Articulating & Foldingframe
- The well designed linkage of the frame articulation joints enables the GF 5001 T to follow uneven fieldcontours.
- It makes the tedder easy to fold fromwork to transport and back again whilestill maintaining the ability to flex vertically.
For low horsepowertractors
The GF 5001 T, with its drawbar hitch,can be used with very low horsepowertractors, even with tractors without ahydraulic 3-point hitch.Small farms with old or small tractors canalso benefit from the advantages of theGF 5001 T.
Narrow transport
For transport the two outer rotors of theGF 5001 T are folded towards the rear. In the transport position the width of thetedder does not exceed 2.80 m (9’2”).The width is below 3.00 m (9’10’’).
7
A
B
“Pro” tines- Deflectors A prevent crop build up for improved spreading, - The uneven strand length B provides improved raking and increased tine service life.
Working widths of 5.75 m(18’10’’) and 6.40 m (21’) !
• To preserve fodder palatabili-ty: these tedders fitted with 6 small diameter rotors areideally suited to pick up 3 swaths from 2 m (6’7”) and2.40 m (7’10”) cutting widthmowers.
• In addition to being easilyoperated this tedder’s greaterwidth provides a higher output in the field.
Six small diameter rotors, driven through DIGIDRIVE®
couplings, a stabilized headstock, hydraulic setting tooblique running (MHO version),and the lighting system fitted as standard are a few of thefeatures of these “Top-of-the-line” Gyrotedders.
“Top-of-the-line” performance
GyroteddersGF 5801 MH/MHO - GF 6401 MH/MHO
Working width (DIN) (m/ft)
Number of rotors
Number of tine arms per rotor
Rotor drive Through DIGIDRIVE®-couplings
Headstock Pivoting
Tyres Balloon 15 x 6.00 - 6 Balloon 15 x 6.00 - 6 / Mega Balloon 220/50-6 on centre rotors
Oblique position setting Manual setting Hydraulic setting Manual setting Hydraulic settingof wheel angle of wheel angle of wheel angle of wheel angle
Weight (kg/lbs) 700/1543 760/1675 835/1841 880/1940
GF 5801 MH GF 5801 MHO GF 6401 MH GF 6401 MHOS P E C I F I C AT I O N S5.75 / 18’10’’
6
5
6.40 / 21’
6
6
8
Anti-drift stabiliser: for even spreading
The anti-drift stabiliser enables regularcrop deposit for a homogeneous dryingprocess.- This device minimises the “wallowing”
that would normally occur when a tedder is operated at high speed or indense crops.
- The tedder tracks smoothly in line with thecentre of the tractor. Normal turning andpivoting of the headstock is not affected.
- As standard.
Safe transport
- With a very narrow width the GF5801MH / MHO models are also verycompact in transport. with a width ofless than 2.40 m (7’10”).
- In addition, a lighting and signallingsystem is fitted as standard to increasesafety on roads.
6 small diameter rotors: qualitytedding
The articulated frame and 6 small diame-ter rotors ensure the crop is turned over inits entirety. - Not only is the crop more evenly spread
but the reduced speed at which it isdischarged means more gentle handlingan reduced nutrient loss in the hay.
- The models GF 5801 MH / MHO meetall the criteria required to produce highly nutritious forage.
Recognized in official tests!
GF 5801 MHO strong points
+ Very even spreading,
+ Good manoeuvrability,
+ Stable, even on slopes,
+ Easy pitch angle adjustment,
+ Folding and oblique position setting made with one cylinder,
+ Increased safety during transport,
+ Easy coupling and operating,
+ Clarity of the operator’s manual.
(Source : “Der fortschrittliche Landwirt” CUMA Dachstein - Tauern and technical advisers of Gumpenstein, 2005). Hydraulic adjustmentfor oblique operation(MHO only)
The machine can be set to right or leftoblique running from the driver’s seat bysimply operating the hydraulic controlvalve.
The exclusive design of this mechanism(fitted with 2 bearings, one of which is ataper roller bearing) provides the systemwith unequalled reliability. - There is no maintenance or risk of wear-
induced play or of the turning shaft seizure.- Total control is available for tedding at
the edges of fields or on steep slopes.
9
“Anti-Drift” stabiliser:regular windrows foreven drying
The GF 6401 and 7601 gyrotedders arefitted with an anti-draft stabiliser withadjustable setting.- prevents them from drifting off course at
high speed or in very dense crops,- they stay perfectly in line with the
tractor and the pivoting headstock’smanoeuvrability is not affected whenturning.
Larger ground contactarea
The central carrying rotors are fitted asstandard with reinforced wheel columnsand Megaballoon wheels
S P E C I F I C AT I O N S
The GF 6401 and GF 7601Gyrotedders combine highoutput with ease of opera-tion. Operating widths are7.60 m (24’11’’) and 8.50m (27’11’’), respectivelywith 8 small diameterrotors.Ideally suited to pick up 3 swaths from mowers & mower conditioners with a 3 m (9’10”) width.These Gyrotedders have anumber of features thatincrease productivity inclu-ding: hydraulic folding and unfolding, automatic transport lock of the headstock and rotor sections, transport functionscontrolled from the tractor,DIGIDRIVE® multiple fingercouplings, etc.
Working width (DIN) (m/ft)
Number of rotor
Number of tine arms per rotor
Rotor drive
Headstock
Tyres
Setting to oblique running By setting wheel By setting wheel By setting wheel By setting wheelangle manually angle hydraulically angle manually angle hydraulically
Weight (kg/lbs) 1020/2249 1020/2249 1100 1170
GF 7601 MH GF 7601 MHO GF 8501 MH GF 8501 MHO
Machines that combine high output with ease of operation…
GyroteddersGF 7601 MH/MHO - GF 8501 MH/MHO
7.60/24’11’’
8
5
Through DIGIDRIVE®-couplings
Pivoting
15 x 6.00-6 Balloon and 220/50-6 Mega Balloon on central rotors
8.50/27’11’’
8
6
10
A
B
MHO version: an exclusive mechanismfor adjusting for oblique operation
- The wheel shafts are coupled to ahydraulic controlled linkage.
- Setting them for oblique operation to theleft or right is controlled from the driver’sseat.
- This mechanism, exclusive to Kuhn, isvery reliable and is fitted with 2 bea-rings on each wheel shaft. No mainte-nance is required.
Minimum transport width and standard lighting system
Despite their size, the GF 7601 and GF 8501 are less than 3 m (9’10”) inwidth for transport and storage. - Due to their compact dimensions and
small overhang, these units can be usedwith low horsepower tractors.
- All controls are operated from the tractor cab.
- Furthermore, a full lighting and signal-ling system is included as standardequipment.
Ideal for cutting widths ofaround 3 m (9’10”)
Fitted with 8 rotors of small diameter eachGyrotedders enable tedding 3 swaths of a 3 m (9’10’’) disc mower. Quick and easyadjustment of the rotor angle allows foraccurate adjustment and clean pick-up ofall types of forage and in any terrain condi-tions.
Highly efficient tines
- Tine deflectors prevent crop wrap-ping for improved crop injection,
- The uneven prong length providesmore efficient raking and increased tineservice life.
A
B
11
Transport
- The wide track of the rear transportwheels using high floatation tires (ultra-high floatation on the GF 10601TO) provide these tedders with excellentstability and transportability.
- In addition to the compact folding capabi-lity for transport, a lighting and signallingsystem is fitted as standard equipment.
Semi-mounted, ultra-wide tedders
GyroteddersGF 6401 T - GF 8501 T - GF 8501 TO - GF 10601 TO
The tractor power availableon the farm will no longerbe determining for largewidth tedding. The GF 6401T/GF 8501 T/GF 8501 TOand GF 10601 TO Gyroted-ders present the ideal solution to this lift problem. The use of a semi-mounteddesign allows these teddersto be operated with tractorsas small as 37 kW (50 hp).Though large in size thesetedders are easy to handleand can achieve an impres-sive work rate. The GF 10601 TO can tedd up to 12 ha (30 acres) per hour with a workingwidth of 10.60 m (34’9”).As far as transport isconcerned, this is carriedout easily, thanks in parti-cular to the integral foldingof the outer sections.
S P E C I F I C AT I O N SWorking width (DIN) (m/ft) 6.40/21’ 8.50/27’11” 10.60/34’9”
Number of rotors 6 8 10
Number of tine arms per rotor 6 6 6
Rotor drive Through DIGIDRIVE®-couplings
Hitch Semi-mounted – 2 points on lower drawbar
Tyres on rotor wheels Balloon 15 x 6.00 – 6 / Mega Balloon 220/50-6 on central rotors
Tyres on transport wheels 145 x 13 195/65 R 15 26 x 12.00-12
Oblique position setting Manual Hydraulic
Weight (kg/lbs) 1100/2425 1350/2976 1470/3240 1890/4166
GF 6401 T GF 8501 T GF 8501 TO GF 10601 TO
12
Thorough, even, tedding
The articulated frame and small diameterrotors ensure the crop is turned over in itsentirety. - Not only is the crop more evenly
spread, but the reduced speed at whichit is discharged means more gentlehandling and reduced nutrient loss inthe hay.
- Semi-mounted Kuhn Gyrotedders meetall the criteria required to produce highly nutritious forage.
Oblique tedding keepshay in the field
For tedding along the edge of a field andto avoid any risk of throwing any cropout of the field or onto a fence obliquetedding is provided. Simply operating thehydraulics and an electric switch in thetractor cab enables all the wheels to beturned to the left and to the right on the GF 8501 TO and GF 10601 TOGyrotedders.
“Mega Balloon” tyres for highfloatation
The two central rotors are each equippedwith reinforced wheel columns andMega-Balloon tyres. - The weight distribution of the central
section of the frame is then easily carried and ground pressure is reduced.
- This also improves the operation of the semi-mounted Gyrotedders overirregular ground.
13 A KUHN exclusive system multiple finger couplings
The rotors of all “1001” series Gyroteddersare driven with the exclusive DIGIDRIVE®
system, developed and patented by KUHN.- The Digidrive® coupling consists of twomultiple finger couplings made from forged, case-hardened, heat treated steel.This design and construction is extremelywear resistant and provides a phenome-nally long life.
- The smooth power transmission of theDigidrive® system provides constant velocity and power transmission underfield operations. As the Digidrive® systemremains engaged even when folded fortransport (exception, GF 5001T) rotors arealways in perfect line making proper alignment unnecessary when unfoldingthe tedder for operation.
- The key feature of the Digidrive® system isthe ability to fold up to an angle of nearly180° without damage even if the PTO isinadvertently engaged. In addition, thesystem provides substantially reducedtransport widths and storage require-ments.
Strong points that all Gyrotedders have in common
KUHN Gyrotedders 1001 series
Benefit from the reliability and comforts offered
by a renowned manufacturer for harvesting crops
D I G I D R I V E®
THE ONE AND ONLY
Kuhn’s experience to assist farmers
14
No tools required to adjust tedding to the type of forage
From a sharp angle of approach that thoroughly disperses heavy long wetforages, to a shallow angle of approachthat meets the requirements of a dryer,more delicate crop, Kuhn Gyrotedderscan be swiftly adapted.Adjustment is provided through the combination of setting the rotor heightand angle. All adjustments are madewithout the need for the remo-val/installation of bolts, pins, or spacers.
Fully equipped
Most of the wide Kuhn Gyrotedders are fitted with standard equipment thatincludes an anti-drift stabiliser, tinedeflectors, Mega Balloon wheels on thecentral rotors, a spare rotor wheel, and a lighting and signalling system.
Top of the rangeequipment for increased user-friendliness
High quality tines for maximumservice life- The 4 large diameter coil tines used on
Kuhn Gyrotedders must meet extremelystringent quality standards. In addition toheat treatment, Kuhn tines undergo anadditional special process which substan-tially increases resistance to fatigue.
- The test requirement of Kuhn tines is to withstand a minimum of at least180,000 full flex cycles on a test bench.All genuine KUHN tines bear the KUHNstamp.
Small diameter rotors
- The rotor articulation range and floatingswivel hitch of the KUHN Gyroteddersallow the tedder to faithfully follow theground contours and thus fully turn overthe forage.
- The tedder tines skim the surface, lift thecrop while minimising ground contactwhich could damage plant roots andcontaminate hay with soil.
- Fast drying thanks to the efficient turning over
Small rotors = Great results
Small rotors: drying time reduced by 33% - Source: Chamber of Agriculture Weser - Ems (Germany)
Improved raking to fully collect the forage on the soil
The large pitch angle ensures that the forage is fully turned over and mixed for improved drying process
15
GF 3701 GF 4201 GF 5001 GF 5801
The best combinations of Kuhn Gyrotedders and KUHN GMD mowers and FC mower-conditioners
Swaths from GMD Disc mower in standard configuration or FC
with swath deflectors open
Swaths from GMD Disc mower with swath reduction kits or FC
with swath deflectors closed
Swaths from front mountedGMD Disc mower or FC
mower-conditioner
Recommended combinations
1.60 m GMD 400
GMD 500
GMD 600 GIIGMD 602 GII
GMD 700 GIIGMD 702 GIIGMD 702 FGMD 283 TGGMD 800 GIIGMD 801 - GMD 802GMD 802 FGMD 313 TG
GMD 902
GMD 4010
GMD 4410
GMD 883
2.00 m
2.40 m
2.80 m
3.10 m
3.50 m
4.00 m
4.40 m
8.80 m
2.00 m FC 202
FC 243
FC 250
FC 283FC 280 F
FC 313FC 303FC 313 F
FC 353
ALTERNA 400
ALTERNA 500
FC 813
FC 883
2.40 m
2.50 m
2.80 m
3.00 m
3.50 m
4.00 m
5.00 m
8.13 m
8.80 m
MOWER-CONDITIONERS
DISC MOWERS
GYROTEDDERS3,70 m 4,20 m 5,00 m 5,75 m
161.60 m
2.00 m
2.40 m
2.80 m
3.10 m
3.50 m
4.00 m
4.40 m
8.80 m
2.00 m
2.40 m
2.50 m
2.80 m
3.00 m
3.50 m
4.00 m
5.00 m
8.13 m
8.80 m
GF 6401 GF 7001 GF 7601 GF 8501 GF 10601
How to properly match a tedder to a mower or mower-conditioner
Choose the appropriate width and avoid running over the crop. Refer to the above table to select the correct tedder width to match your mower or mower-conditioner. Find a tedder size that will maximise productivity while eliminating double coverage and avoid running over swaths.
GMD 400
GMD 500
GMD 600 GIIGMD 602 GII
GMD 700 GIIGMD 702 GIIGMD 702 FGMD 283 TGGMD 800 GIIGMD 801 - GMD 802GMD 802 FGMD 313 TG
GMD 902
GMD 4010
GMD 4410
GMD 883
FC 202
FC 243
FC 250
FC 283FC 280 F
FC 313FC 303FC 313 F
FC 353
ALTERNA 400
ALTERNA 500
FC 813
FC 883
MOWER-CONDITIONERS
DISC MOWER
GYROTEDDERS
6,40 m 7,60 m 8,50 m 10,60 m6,90 m
17
Approach the swath along the centre line of the rotor
When a swath is lying on the ground, the partwith most moisture and which is most compactis located along the centre and close to theground. Tedding too high can leave 30 to 60 cm (12 to 24”) of crop untedded. If theswath is approached along the centre line of a rotor, at the point where the tines are closestto the ground, this ensures that crop is entirelylifted.
Set the rotor angle
Depending on the nature of the crop andstubble height the various settings for rotorangle enable the KUHN Gyrotedder to be setto properly turn over the entire crop. It is notsubject to leaf loses due to overly aggressivetedding or excessive speed, nor “lumps” beingformed as a result of being thrown too close to the ground.
Making night windrows
Crop dries approximately 8 hours a day.During the night, its moisture content increasesagain with the humidity in the air. In case ofimportant dew, drying becomes even more difficult.The Kuhn advantage: Making night windrows with the 2-speed reduction gearboxreduces the amount of crop exposed to humidity.
Fine tuning of the rotor angle
Fine-tuning of the rotor angle and tine heightis performed using the top link on fully mounted tedders or the adjustment crank ontrailed tedders. Tines should be set to skim the ground without scraping it.
1. Fast dryingWith up to 30-35 % humidity, crops loose sugar and proteins due to plant breathing and micro-organisms.
2. Gentle crop handlingWith less than 40 % humidity, crop becomes delicate and prone to leaf loss, especially for leguminous plants.
3. Even drying of the whole cropFor silage making and baling, the differences in moisture level causes uneven fermentation. For hay, a 15% humidity level must bereached to prevent its warming up and mould from developing. The protein digestibility of “warm” crop is reduced.
4. At any timeThrough limited exposure to sun and rain, the crop’s value is preserved, preventing in particular the loss in vitamin A, which improvescow fertility, udder development, milk production and the strength of newly born calves.
All along the drying process
KUHN Gyrotedders
Using the Gyrotedder gently for the last pass(reduced PTO speed and relatively highgroundspeed) limits leaf loss.
2-speed reduction gearbox for making night windrows
Is available as optional equipment, for makingsmall windrows in order to limit the exposureof crop to dew and rain.
18
TECHNICAL SPECIFICATIONS
Hitch 3-point Towed - 3-pointdrawbar
Category 1 and 2 - 2
Headstock [3 point] Fixed Pivoting - Pivoting
Wheels adjustable in height without use Standardof tools with 15 x 6.00 - 6 balloon tyres
Number of rotors 4 4 4 4 6 6
Number of tine arms per rotor 4 6 6 6 5 5
Rotors driven through exclusive DIGIDRIVE® system Standard
Total extended width (m/ft) 4.00 /13’1” 4.65 /15’3” 5.40 /17’11” 5.40 /17’11” 6.00 /19’8” 6.00 /19’8”
DIN working width (m/ft) 3.70/12’2’’ 4.20/13’9’’ 5.00/16’5’’ 5.00/16’5’’ 5.75/18’10’’ 5.75/18’10’’
Width in transport position (m/ft) 2.17 (7’3”) 2.50 (8’2”) 2.85 (9’4”) 2.80 (9’2”) 2.40 (7’11”) 2.40 (7’11”)
Power requirement at PTO – kW / hp (from) 11/15 15/20 15/20 15/20 20/27 20/27
Weight (kg/lbs) 327/720 452/995 513/1129 448/986 700/1573 760/1675
Drive with torque limiter Standard
Manual positioning of outer rotors Manual 180° pivoting Folding Hydraulic verticalfor directing tines inwards towards foldingthe rear
2-speed reduction gearbox Optional equipment
Oblique running (left / right) Manual Hydraulicby setting wheel angle
Wheel deflector Optional equipment Standard
Anti-drift stabiliser - Optional equipment Standard
Lighting and signalling Optional equipment Standard
Tractor hydraulic equipment - 1 single acting outlet 1 double acting outlet
GF 3701 GF 4201 MH GF 5001 MH GF 5001 T GF 5801 MH GF 5801 MHO
For GF 22 N/P & GF 440 T and GF 6301MH through to GF 10601 TO Gyrotedders – please refer to the individual brochures for these tedder lines.
Our material is produced in accordance with the European Machinery Directive in the member states of the European Union. In countries outside the E.U., our machinery complies with the safety regulations set bythe country concerned. Some safety devices may have been removed from our leaflets in order to clarify the illustration. Under no circumstances should the machine be operated without the necessary safety devicesin place (as specified by the assembly instructions and operators manual). We reserve the right to change any designs, specifications or materials listed without further notice. Our models and trademarks are patented in more than one country. Machines and equipment in this leaflet can be covered by at least one patent and/or registered design. Registered trademark(s).
To p
rote
ct th
e en
viro
nmen
t, th
is le
afle
t is
prin
ted
on c
hlor
ine-
free
pape
r. / P
rinte
d in
Fra
nce
- 92
0 15
4 GB
- 0
3.08
- Co
pyrig
ht K
UHN
2008
TECHNICAL SPECIFICATIONSGF 10601
TOGF 8501
TOGF 8501
MHOGF 8501
TGF 8501
MHGF 7601
MHOGF 7601
MHGF 7001
TGF 6401
TGF 6401
MHOGF 6401
MH
Hitch 3-point semi-mounted towed - 3-point semi-mounted to 2 lower lift armsto 2 lower drawbar
lift arms
Category 2 - 2
Headstock Pivoting - Pivoting
Height adjustable wheels 2 positions
Tyres 15x6.00-6 balloon
Wheels with Mega Balloon standard - standardtyres on central rotors
Number of rotors 6 8 10
Number of tine arms per rotor 6 5 6
DIGIDRIVE® system standard
Total extended width (m/ft) 6.75/22’2” 7.35/24’1” 7.93/26’ 8.85/29’ 10.95
DIN working width (m/ft) 6.40/21’ 6.90/22’8” 7.60/24’11” 8.50/27’11” 10.60/34’9”
Width in transport position (m/ft) 2.95/9’8”
Height in transport position (m/ft) 3.30/10’10” 3.45/11’4” - 2.83/9’3” 3.20/10’6” 3.45/11’4” 3.95/13’
Tyre size for integral transport- 145 x 13 - 195/65 R 15 26x12.00-12
unit
Power requirement at PTO – 22/30 30/40 40/55kW/HP (as from)
Weight (kg/lbs) 850/1874 900/1980 1100/2420 655/1441 1020/2249 1120/2469 1100/2420 1170/2574 1350/2970 1470/3234 1890/4158
Drive with torque limite standard
2-speed reduction box Optional equipment
Setting to oblique running manual hydraulic manual hydraulic manual hydraulic manual hydraulic(left / right)
Wheel deflector standard - standard
Tine deflectors standard - standard
Anti-drift stabiliser standard - - standard - - -
Lighting and signalling standard Optiomal standardequipment
Tractor hydraulic and electric 1 SA* outlet 1 SA* 1 DA** - 1 DA** 2 DA** 1 DA** 2 DA** 1 DA** 1 DA** outletequipment 1 x DA** outlet 1 x 2 pin
oulet electrical- socket
(supplied)
YOUR KUHN DEALER :U.S.A. : KUHN FARM MACHINERY, INC5390 East Seneca StreetVERNON, NY 13476 - 0840Phone : (315) 829 2620 - Fax : (315) 829 2270www.kuhn-usa.com - info@kuhn-usa.com
KUHN FARM MACHINERY PTY. LTD.7 Manorwood Pl.,MITCHAM, 3132 VIC,Fax : 03 9874 3462www.kuhnsa.com - info@kuhnsa.com
KUHN S.A. - F 67706 Saverne Cedexwww.kuhnsa.com - E-mail: info@kuhnsa.com
United Kingdom : KUHN FARM MACHINERY (U.K.) LTDStafford Park 7,TELFORD - SHROPSHIRE TF 3 3 BQPhone : TELFORD (01952) 239300/1/2Fax : (01952) 290091www.kuhn.co.uk - info@kuhn.co.uk
* SA: single acting; **DA: double actingFor information on small and medium sized Kuhn Gyrotedders – please refer to the literature provided for those machines.
top related