gildemeister nef ct 60 en - maschinen-kistner.de · 2015-12-10 · hydraulic three-jaw chuck ø 315...

KISTNER GmbH & Co. KG

Industriestraße 7-9 D-95349 Thurnau

Tel. (+49) 9228 987-0 info@maschinen-kistner.de www.maschinen-kistner.de

GILDEMEISTER NEF CT 60

LIST OF CONTENTS

Machine info …………………………………………………….……………………………..………………………………………..…..……………….

Equipment ……………………………………………………………………………………………………..………………………………………….………

Technical data …………………………………………………………………………………..……………………………..….……………..………. Machine pictures …………………………………………………………………………………………………………………………….……….

Floor plan …………………………………………………………………………………………………………………..………………………………….…...

Transport data ……………………………………………………………………….…………………………………………………………..……….

3 4 5 7 9 11

GILDEMEISTER NEF CT 60 | | 2

2

MACHINE INFO

| 3

Manufacturer

Type

Year of manufacture

Control

Machine number

Distance between centers

GILDEMEISTER NEF CT 60 |

1x Hydraulic three-jaw chuck ø 315 mm

1x Hydraulic four-jaw chuck

1x Hydraulic two-jaw chuck

2x Steady rests 30-190 mm and 170-260 mm

1x Set VDI – tool holder

1x Chip conveyor

1x Set of tool holders incl. tools

Various sets of jaws

Operating manual / Documentation

Machine parameters on CD

| 4

EQUIPMENT

GILDEMEISTER NEF CT 60 |

| 5

TECHNISCHE DATEN

Turning diameter

Swing-ø over bed

Swing-ø over cross slide Bed

Height of centers over bed guideway

Bed width Slides

Slide lenght

Slide width

Transerval / longitudinal distance Spindle – clamping means

Spindle size, flat flange

Spindle bore

Chuck diameter

Spindle-ø in front bearing Drive

Drive power

Max. torque on the main spindle

Speed range, infinitely variable Feed

Z-feed screw-ø / slope

X-feed screw-ø / slope

Z-feed force 100% DC

X-feed force 100% DC

Z-rapid traverse / feed rate

X-rapid traverse / feed rate Tailstock

Tailstock, quill diameter

Tailstock, centre sleeve stroke

Tailstock pressure, max.

Tailstock, quill holder

GILDEMEISTER NEF CT 60 |

| 6

Turning lenght

Machine weight, net

Machine lenght x width x height

Revolver with auxiliary drive

12-slots turret with 6 driven tool holders and 6 for normal tool holders according to DIN 69880. This tool holder can also be mounted in the position for driven tools.

GILDEMEISTER NEF CT 60 |

MACHINE PICTURES

| 7 GILDEMEISTER NEF CT 60 |

| 8 GILDEMEISTER NEF CT 60 |

FLOOR PLAN

| 9 GILDEMEISTER NEF CT 60 |

| 10 GILDEMEISTER NEF CT 60 |

TRANSPORT DATA

| 11 GILDEMEISTER NEF CT 60 |

Thank you very much for your interest