gas turbine control electric servo actuators · 2018. 3. 28. · storage temp actuator: -50°c to...
Post on 28-Feb-2021
1 Views
Preview:
TRANSCRIPT
Demanding applications such as gas turbine control require reliable operation in hazardous environments. Diakont’s industry-leading line of explosion-proof electric servo actuators are used to increase efficiency, safety, and reliability in the gas turbine industry for applications such as:• Inlet guide vane (IGV) control• Nozzle guide vane (NGV) control• Fuel valve control
Diakont’s electric servo actuators provide exceptional service lifetime while requiring minimal maintenance. Diakont’s linear and rotary actuator configurations both use advanced roller screw technology which ensures an operation lifetime of 20 years or more. Also, Diakont’s robust actuators only require re-lubrication maintenance once every four years.
Hydraulic systems have historically been used in the turbine control industry. However, hydraulic systems present issues of complexity, maintenance costs, and space challenges due to the need for auxiliary hydraulic components. Diakont’s electric servo actuators deliver a direct replacement for hydraulic systems and provide a more compact, more cost-effective, and safer solution.
IGV/NGV Actuator
Feedback SensorSynchronous Motor Roller Screw
Fuel Valve Fail-Safe Actuator
Diakont electric servo actuators incorporate progressive technology, including precisely machined roller screws and high-force permanent magnet synchronous motors (PMSM). These components are integrated into a single unit, thus providing exceptional performance in a compact footprint.
Diakont’s explosion-proof smart control unit provides the ability to control actuators with an analog or CAN interface and facilitates easy actuator integration, potential fault detection, and troubleshooting service.
Gas Turbine Control Electric Servo Actuators
High Performance Solutions
Low Maintenance with a Long Service Life
Hydraulic Replacement
Compact Design
Smart Control Unit
North America
3853 Calle FortunadaSan Diego, CA 92123+1-858-551-5551 phonesales@diakont.us.com
Europe
2 Uchitelskaja St.St. Petersburg, Russia 195274+7-812-324-6637 phonesales@diakont.com
Via Achille Grandi nc.10/1252100 Arezzo, Italy+39-0575-250332 phonesales.it@diakont.com
1. Most compact actuators of comparable performance
in the turbine control industry
2. Low maintenance with a long service life
3. Ideal for replacing maintenance heavy/complex
hydraulic systems
4. High durability in severe operating environments
5. Smart control unit for simple integration and
troubleshooting
Configuration options Medium force High force
Rated force 31 kN 133 kN (220 kN option)
Maximum speed 100 mm/sec 55 mm/sec
Brake Option available Option available
Fail-safe spring Option available Option available
Operating temp Actuator: -40°C to+120°CControl unit: -40°C to +60°C
Storage temp Actuator: -50°C to +120°CControl unit: -40°C to +85°C
( -50°C option)
Hazardous area Actuator: Atex Zone 2* (Atex Zone 1 option)
Control unit: Atex Zone 2
Vibration resistance Up to 10G (10-500 Hz)
Rotary Linear
Rated force/torque 30 Nm 6 kN
Powered closing time 0.1 sec 0.25 sec
Unpowered closing time 0.2 sec 0.35 sec
Fail-safe spring Yes Yes
Position accuracy ±4 arcmin ±0.04 mm
Operating temp Actuator: -40°C to+100°CControl unit: -40°C to +60°C
Storage temp Actuator: -50°C to +100°CControl unit: -40°C to +85°C
( -50°C option)
Hazardous area Actuator: Atex Zone 1* Control unit: Atex Zone 2
Vibration resistance Up to 10G (10-500 Hz)
IGV/NGV Actuator Specifications Fuel Valve Control Actuator Specifications
Custom Modifications
Gas Turbine Control Electric Servo Actuators
The specifications listed for the IGV/NGV actuators and the fuel valve actuators are based on typical configurations. However, custom modifications can be made to accommodate specific customer requirements. Contact a Diakont representative for more information.
*Please request information about UL and CSA certificates from local a Diakont representative
North America
3853 Calle FortunadaSan Diego, CA 92123+1-858-551-5551 phonesales@diakont.us.com
Europe
2 Uchitelskaja St.St. Petersburg, Russia 195274+7-812-324-6637 phonesales@diakont.com
Via Achille Grandi nc.10/1252100 Arezzo, Italy+39-0575-250332 phonesales.it@diakont.com
Fail-Safe Spring Redundant Motor Manual Drive
Brake
Brake
Diakont electric servo actuators are available with various options to ensure reliable operation in gas turbine applications.• Fail-safe spring• Electromechanical brake• Terminal box at actuator for easy disconnect cables • Redundant motor • Manual drive, and more
Configuration Options
Local Customer Service
Contact a local technical support and troubleshooting from Diakont facilities in the USA (San-Diego), Italy (Arezzo), and Russia (St-Petersburg). Diakont’s field teams support installation, tuning and maintenance. Diakont also has various test benches for endurance and functional testing.
top related