g768 car model
Post on 19-Feb-2015
77 Views
Preview:
TRANSCRIPT
Spare Parts ListServo joint Frong-wheel height
adjustment block 4pcs A servoorientation-poles
C-gasket A C-gasket B
2 gaskets
Spare gasketsand nuts
4゜ left andright bear
2pcs "Z" bracket
Sping control block
B servoorientation-poles
rear-wheel heightadjust block 4pcs
connecting rod
place adjust A place adjust B
2 rear-wheelregulator
2 sphericitydrawbars
2 half balldrawbars 3 spare block front motherboard
4.8mm ball 1pcs
5.8mm ball 2pcs
M3 hexagon nuts 2pcs
M3X16 screw 2pcs
M3X22 screw 8pcs
M3X8 screw 4pcs
M3X8 sink screw 10pcs
M3X15 bolt 3pcs
M2.6X10 screw 2pcs spare rope 2pcs
front shaft A 1pcs
front shaft B 1pcs
"L" wrench 1pcs
metal wrench 1pcs
replace the part can adjustthe rear-wheel spacing
Model CarOperation Manual
Name:Model CarNo.:G768Manufacturer:Dongguan BDS Technology limitedAddress:3nd Liuhua Industrial District,Dongcheng District,Dongguan City,Guangdong Province,China
Product Parts Skeleton Drawwing
3.1 gasket 2pcs
Sewo assemble and adjust sketch map
Status fun days sener
1 You can choose different plastic parts atA or B place If you need.
.2 While use the different drivers you mustchoose the comfortable plastic parts at theC place
. ,
.
In choosing a right hole at the bottom ofthe car can coad the drivers reverse.
To drill a dia 2 8mm hole.
Notice procecding of assemble and adjust
Using a comfortable rope to fix battery
Installing different adjustment block to adjustthe height of the front wheel
With wrench clockwise or counter clock wiserotation adjustment nut can adjust thet i g h t n e s s d i f f e r e n t i a l y e a r s
,.
Installing a 4 obliquity rockerarm to adjustthe angle of the front wheel
,.
Installing height adjustment block to adjust
the height of the rear axle. Meson by adjusting the four different locationscan adjust the angle of different front
spongeassembly
assembly the tyres when youfirst load the sponge,if the
you can use glue sticktight them.
assembly the adjustment block toadjuslt the intensity of buffer spring
5.8mm ball 2pcs
M3 nut 2pcs
3.1 gasket 2pcs
M3X16 screw 2pcs
M3X8 sink screw 2pcs
The servo will is resupinate with theB serve orientation-pole,and haveappropriate angle
adjust the D or E,can adjust left andright front wheel's angle
4 ~6° °
2 ~3° °
0°
looseness
wrench tightenadjust the screwcan change thegear's placing.
tyres and wheels are wobble,
top related