feldbus-kommunikation fieldbus communication...
Post on 26-Sep-2019
20 Views
Preview:
TRANSCRIPT
c l o s e r c o n t a c t s
Feldbus-Kommunikation
Fieldbus communication
Profibus
PROFIBUS
Der PROFIBUS (Process Field Bus) ist ein, nach der interna-tionalen Norm EN 50170 genormter, offener Feldbus. Umden unterschiedlichen Anforderungen in der Automatisie-rungstechnik gerecht zu werden, wird der PROFIBUS indrei unterschiedliche Profile unterteilt:
PROFIBUS-FMS (Field Message Specification) Protokoll zur Kommunikation zwischen verschiedenenSteuerungen (SPS) oder PC’s.
PROFIBUS-PA (Process Automation)Eigensicheres Bussystem für die Prozesstechnik.
PROFIBUS-DP (Decentral Periphery)Übertragungsprotokoll für die Kommunikation zwischenSteuerung und dezentralen Ein-/Ausgabebaugruppen.
Die Lumberg-E/A-Stationen unterstützen das PROFI-BUS-DP-Protokoll.
Durch die Unterstützung der meisten großen Steuerungs-hersteller und die herstellerneutrale Weiterentwicklungdurch die PNO (Profibus-Nutzer-Organisation) wird derProfibus auch in Zukunft eine wichtige Rolle bei denFeldbussystemen spielen. Mittlerweile sind Feldgeräte fürnahezu alle Anwendungen verfügbar (binäre und analoge E/A-Module, Robotersteuerungen, Visualisierungssysteme).
PROFIBUS
PROFIBUS (Process Field Bus) is an open fieldbus standard-ized in compliance with the international standard EN50170. To meet various demands in automation technolo-gy PROFIBUS is subdivided into three different profiles:
PROFIBUS-FMS (Field Message Specification)Protocol for communication between different controlsystems (PLCs or PCs).
PROFIBUS-PA (Process Automation)Intrinsically safe bus system for process technology.
PROFIBUS-DP (Decentral Periphery)Transmission protocol for the communication betweencontrol system and decentral input/output assemblies.
The Lumberg I/O stations support the PROFIBUS-DPprotocol.
PROFIBUS applications will play a vital role in the futureof fieldbus systems thanks to the support of most big con-trol system manufacturers and the developement of PNO(PROFIBUS User Organization), which is independent ofmanufacturers. PROFIBUS field devices are currently avail-able for practically every application, such as binary andanalog I/O modules, robot control systems, visualizationsystems, etc...
Lumberg-Produkte
Um einen optimalen Einsatzdes PROFIBUS-DP im dezentra-len Bereich zu gewährleisten,müssen die Komponenten denhöchsten elektromechanischenAnforderungen genügen. DieProfibus-DP-Komponenten vonLumberg bieten aufgrund desGehäusematerials und
Vergusstechnik absolutenSchutz für die Elektronik. Die Module sind wahlweise mitM23-Anschlusstechnik fürHybridkabel (Spannungsversor-gung und Busleitung in einemKabel) oder M12-Steckverbin-dern mit zusätzlicher Span-nungseinspeisung verfügbar.
Lumberg products
To ensure the best applicationof the PROFIBUS-DP in thedecentralized sector, compo-nents must meet maximumelectromechanical demands.Thanks to the materials usedfor the housings and the pot-ting technology Lumberg’sPROFIBUS-DP components
offer excellent protection solu-tions for electronics in harshenvironments. Optionally, themodules are available withM23 connection technology forhybrid cables (power supplyand bus line in one cable) orM12 connectors with externalpower supply.
PROFIBUSist ein genormtes, offenesFeldbussystem
PROFIBUSis a standardized open fieldbussystem
4.2
SystembeschreibungSystem description
4.3
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es
Länge (m)Length (m) 1200 1200 1200 1200 1000 400 200 100
Technische Daten
Übertragungsmedium2-adriges, geschirmtes Kabel mit einem verdrillten Adernpaar(nach RS485)LichtwellenleiterHybridkabel zur Übertragung von Daten und Versorgungs-spannung
NetzwerktopologieLinienstruktur mit aktivem Busabschluss (Widerstandsnetz-werk) an beiden Enden eines Segments. Als Segment bezeich-net man den Busabschnitt zwischen zwei Abschlusswiderstän-den. Werden keine Repeater eingesetzt, besteht das gesamteNetzwerk aus einem Segment.Mono- und Multi-Master-Systeme möglich
BuszugriffToken-Passing-Verfahren zwischen MasternMaster-Slave-Verfahren zwischen Master und Slaves
Anzahl der Teilnehmer32 pro SegmentMithilfe von Repeatern ist der Bus auf bis zu 126 Teilnehmer erweiterbar.
Zulässige Übertragungsraten und SegmentlängenIn Abhängigkeit der Übertragungsrate (Baudrate) ändern sich diezulässigen Segmentlängen und die Anzahl der Repeater, die inReihe geschaltet werden dürfen.
Technical data
Transmission medium2-wire, shielded cable with twisted pairs (according to RS485)Fiber optic cableHybrid cable for the transmission of data and supply voltage
Network topologyLine structure with active bus termination (resistance network) at both ends of a segment. A segment is the bus sector between two terminating resistors. If repeaters are notused, the entire network consists of one segment.Mono- and multi-master systems possible
Bus accessToken-passing method between mastersMaster-slave process between master and slaves
Number of participants32 per segmentRepeaters can be used to expand the bus to up 126 participants.
Admissible transmission rates and segment lengthThis depends on the transmission rate (Baud rate) the segmentlengths and the number of repeaters which can be switched serially.
PRODUKTEModule in M23- oder M12-Anschlusstechnik
PRODUCTSmodules with M23 or M12connection
Bit/s
max. Anzahl Repeatermax. number of repeaters
9,6k
7
19,2k
7
45,45k
7
93,75k
7
187,5k
7
500k
7
1,5M
4
3M6M12M
4
4.4
Technische Daten
BuszykluszeitDie Buszykluszeit ist u.a. von folgenden Faktoren abhängig:
Anzahl der TeilnehmerDatenmenge/Teilnehmer Übertragungsrate
Sie muss für jeden Busaufbau individuell erfasst werden.
Projektierung der TeilnehmerDie Projektierung der einzelnen Teilnehmer erfolgt mittels derGSD-Dateien (GeräteStammDatei), welche vom Hersteller fürjeden Slave bereitgestellt werden.Die GSD-Dateien für die Lumberg-Busmodule können unter www.lumberg.com/downloads heruntergeladen werden.
AdressierungÜber Drehadressierschalter (Adresse 1...99) oder Adressiertools(Adresse 1...126) wird jedem Teilnehmer eine eigene Adressezugewiesen. Für die Software-Programmierung der Lumberg-Module stehen die folgenden Adressiertools zur Verfügung:
Adressiertool 0973 PTL 201: für Module der M23-Busan-schluss-Serie 0970 PSL 201/202/203/204Lumberg-Handheld 0903 UTL 101 für sämtliche Module mit M12-Busanschluss, sowie für folgende Module mit M23-Busanschluss: 0970 PSL 201/202/203/204CoDi-Software für das e2c-SystemProfibusinterface in Verbindung mit einer Projektierungs-software, wie z.B. COMProfibus oder STEP7
DiagnoseDer Diagnoseaufbau ist in der internationalen Norm EN 50170,Volume2 festgeschrieben und besteht aus max. 244 Byte. DieDiagnose unterteilt sich grundsätzlich in zwei verschiedene Teile:Byte 0 bis 5 enthalten die System- oder Standarddiagnose, diejeder Profibus-Slave beinhalten und immer identisch aufgebautsein muss (z.B. Stationsstatus, Master-PROFIBUS-Adresse,Herstellerkennung).Ab Byte6 beginnt die gerätebezogene Diagnose, die für jedenSlave optional und individuell aufgebaut sein kann. Byte6 bein-haltet grundsätzlich die Länge der erweiterten Diagnose. Dieeigentliche Diagnose beginnt dann bei Byte7 und enthält z.B.Meldungen über Kurzschluss oder Überlast.
Technical data
Bus cycle timeThe bus cycle time depends on, among other things, the follow-ing factors:
number of participantsamount of data for each participanttransmission rate
It must be specified individually for each bus application.
Projectioning of the participantsThe individual participants are projectioned by means of the GSDfiles (configuration file) which are provided by the manufacturerfor each slave.The GSD files for the Lumberg bus modules can be downloadedfrom www.lumberg.com/downloads.
AddressingAn individual address is allocated to each participant via rotaryaddress switches (address 1...99) or addressing tools (address1...126). The following addressing tools are available for the soft-ware programming of the Lumberg modules:
Addressing tool 0973 PTL 201: for modules of the M23 bus connection series 0970 PSL 201/202/203/204Lumberg Handheld 0903 UTL 101 for all modules with M12 bus connection as well as for the following modules with M23 bus connection: 0970 PSL 201/202/203/204CoDi software for the e2c systemProfibus interface in conjunction with a projectioning software, like COMProfibus or STEP7
Diagnostic systemThe structure of the diagnostic system is defined in the interna-tional standard EN 50170, volume2 and comprises 244 bytes as amaximum. The diagnostic system is generally subdivided into twodifferent parts:Bytes 0 to 5 comprises the system or standard diagnosis whicheach PROFIBUS slave must comprise and which must be struc-tured identically (e.g. station status, master PROFIBUS address,manufacturer’s identification).From byte6 the unit-related diagnosis begins which can be struc-tured optionally and individually for each slave. Byte6 generallycomprises the length of the extended diagnosis. The actual diag-nosis then begins with byte7. As an example, byte7 may indicatea short circuit or overload.
���������������
��� �����������������������
��� ������ ��������������� ���� �� ��������
�� ������������� �� ��������
����� ����� �� ��������� ����� ��� ������ !��"#���$$�������%����������
������������&�'�������� ���(������#��������� ����)��*�����������������
��� ��
)+���� ��������� ����)���� ������ !��"#���$$�������%���������
������������������� ���#��������� ����)������������
��� �� ��������� ����)���� ������ !��"#���$$�������%����������
)+���� ��������� ����� ��� ������ !��"#���$$�������%������������
��������������,��� �����������
��������������,'-��� "��� ���������% �������������
�������������,'-��� "��� ����������� �� ��% �����������
.���$� �!������������ ���*�������)�
����������
.���$� �!������������ ���)���������
������������
������������������,'-"��� ���������%��������������
/���� ���)���������
������������
-������$�������������� ����
)��������� �������������
������������������,'-"� �� ��% �������������
.���$� �!�������� ���� �)������������������
/������ �������� �������������
4.5
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es
SystembeschreibungSystem description
4.6
Profibus-DP-Teilnehmer mit 8 digitalen Eingängen zum Anschluss von Standard-Sensoren
Profibus-DP devices with 8 digital inputs to connectstandard sensors
Seitepage 4.8
Profibus-DP-Teilnehmer mit 16 digitalen Eingängen zumAnschluss von Standard-Sensoren
Profibus-DP devices with 16 digital inputs to connectstandard sensors
Profibus-DP-Teilnehmer mit 8 digitalen Ausgängen zumAnschluss von Standard-Aktoren
Profibus-DP devices with 8 digital outputs to connectstandard actuators
Profibus-DP-Teilnehmer mit 16 digitalen Ausgängen zumAnschluss von Standard-Aktoren
Profibus-DP devices with 16 digital outputs to connectstandard actuators
Profibus-DP-Teilnehmer mit 8 digitalen Eingängen zum An-schluss von Standard-Sensorenund 4 digitalen Ausgängenzum Anschluss von Standard-Aktoren
Profibus-DP devices with 8 digital inputs to connectstandard sensors and 4 digitaloutputs to connect standardactuators
Profibus-DP-Teilnehmer mit 8 digitalen Eingängen zum An-schluss von Standard-Sensorenund 8 digitalen Ausgängen(0,5 A) zum Anschluss vonStandard-Aktoren
Profibus-DP devices with 8 digital inputs to connectstandard sensors and 8 digitaloutputs (0.5 A) to connectstandard actuators
Seitepage 4.12
Seitepage 4.16
Seitepage 4.20
Seitepage 4.24
Seitepage 4.28
8 I
n16 I
n8 O
ut
16 O
ut
8 I
n /
4 O
ut
8 I
n /
8 O
ut
0970 PSL 114 - 0970 PSL 213
0970 PSL 111 - 0970 PSL 209
0970 PSL 112 - 0970 PSL 210
0970 PSL 124 - 0970 PSL 215
0970 PSL 113 - 0970 PSL 211
0970 PSL 123 - 0970 PSL 214
4.7
ÜbersichtOverview
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es
Adressiergeräte Handheld addressing devices
Adressiertools / Adressier-adapter für Busteilnehmer
Addressing tools / addressingadaptors for the bus users
Profibus-Leitungen Profibus cables
Profibus-Abschlusswiderstände Profibus terminating resistors
Seitepage 4.32
Seitepage 4.34
Seitepage 4.36
Seitepage 4.40
Seitepage 4.41
0903 UTL 101
0973 PTL 201 - 0973 PTL 202
0975 254... - 0975 202... - RKU... - RSU-RKU...
0979 PTX 101 - 0979 PTX 201
für Profibus-Module for Profibus modules
Anschlusshinweise Connecting information
4.8
1 = interne Signaleinternal signals
2 = System/Sensoriksystem/sensors
gelbyellow1..8 Kanalstatus
channel status
LED AnzeigeIndication
BedingungCondition
Us grüngreen
Sensorversorgung aktivsensor supply active
BF rotred
Busfehlerbus error
DIA rotred
Moduldiagnose (Sensorkurzschluss / Sensorüberlast)module diagnostics (sensor short-circuit / sensor overload)
DiagnoseanzeigeDiagnostic indication
ULgrüngreen
Modulelektronikversorgung aktivmodule electronic supply active
0970 PSL 114 8 In
Profibus-DP-Teilnehmer mit 8 digitalen Eingängen zum An-schluss von Standard-Sensoren,kombinierte FIXCON-/M12-Buchse, Drehadressierschalterzur Adresseinstellung, M12-Busanschluss
Profibus-DP device with 8 digital inputs to connectstandard sensors, combinedFIXCON/M12 socket, rotaryaddress switches for address-ing, M12 bus connection
1 = +5 V 1
2 = Line A3 = GND (0 V) 1
4 = Line B5 = Erde / earth
PinbelegungPin assignment
1 = Erde / earth2 = n.c.3 = n.c.4 = +24 V 2
5 = GND (0 V) 2
6 = n.c.
Byte 0
Lage der Diagnose-Bits siehe SystembeschreibungFor the position of the diagnostic bits please see system description
DiagnosebyteDiagnostic byte
Bit Bit0 412
Sensor123
Diagnose / DiagnosticSensor-Overload
345
456
67
78
BitbelegungBit assignment
1 = +24 V2 = n.c.3 = GND (0 V)4 = IN5 = Erde / earth
Busanschluss M12 Spannungsversorgung M23 Eingang M12Bus connection M12 Power supply M23 Input M12
4.9
Technische DatenSchutzart IP 67Umgebungstemperatur 0°C / +60°CGewicht 535 gGehäusematerial PUR
Bus-System ProfibusID-Nummer 044F hexGSD-Datei Lum_044F.gsdÜbertragungsrate max. 12 MBaudAdressbereich 1–126 dezDrehadressierschalter 1–99 dezVoreingestellte Adresse 99 dez
Elektronik-Stromversorgung UL
Nennspannung 24 V DCSpannungsbereich 19–30 V DCStromaufnahme typ. 60 mAVerpolschutz jaAnzeige LED grün
Sensorik-Stromversorgung US
Spannungsbereich min. (UL - 1,5 V)Gesamtstrom aller Sensoren max. 800 mAKurzschlussfest jaAnzeige LED grün
Eingänge Typ 3 gem. IEC 61131-2Nenneingangsspannung 24 V DCSignalzustand "1" 11–30 VSignalzustand "0" -3–5 VEingangsstrom bei 24 V typ. 6 mAKanaltyp Schließer p-schaltendAnzahl der digitalen Kanäle 8Statusanzeige LED gelb pro Kanal
Lieferumfang / ZubehörM12-Schutzkappen jaBeschriftungsschilder ja
Anschlusshinweis siehe Ende des Kapitels
Technical dataDegree of protection IP 67Operating temperature range 0°C / +60°CWeight 535 gHousing material PUR
Bus system ProfibusID number 044F hexGSD file Lum_044F.gsdTransmission rate max. 12 MBaudAddress range 1–126 decRotary address switches 1–99 decDefault address 99 dec
Electronics power supply UL
Rated voltage 24 V DCVoltage range 19–30 V DCPower consumption typ. 60 mAReverse polarity protection yesIndication LED green
Input power supply US
Voltage range min. (UL - 1.5 V)Total current of all sensors max. 800 mAShort circuit-proof yesIndication LED green
Inputs Type 3 acc. to IEC 61131-2Rated input voltage 24 V DCSignal state "1" 11–30 VSignal state "0" -3–5 VInput current at 24 V typ. 6 mAChannel type N.O. p-switchingNumber of digital channels 8Channel status indicator LED yellow per channel
Included in delivery / accessoriesDust covers M12 yesAttachable labels yes
Connecting information please see end of chapter
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es0970 PSL 114
BestellbezeichnungDesignation
��
Funktionsgleiches Modul ist auch ohne Drehadressierschalter Functionally identical module is also available without erhältich: Bestellbezeichnung 0970 PSL 106 rotary address switches: designation 0970 PSL 106
4.10
Byte 0
Lage der Diagnose-Bits siehe SystembeschreibungFor the position of the diagnostic bits please see system description
DiagnosebyteDiagnostic byte
Bit Bit0 412
Sensor123
Diagnose / DiagnosisSensor-Overload
345
456
67
78
BitbelegungBit assignment
0970 PSL 213 8 In
Profibus-DP-Teilnehmer mit 8 digitalen Eingängen zum An-schluss von Standard-Sensoren,kombinierte FIXCON-/M12-Buchse, Drehadressierschalterzur Adresseinstellung, M23-Busanschluss
Profibus-DP device with 8 digital inputs to connectstandard sensors, combinedFIXCON/M12 socket, rotaryaddress switches for address-ing, M23 bus connection
gelbyellow1..8 Kanalstatus
channel status
LED AnzeigeIndication
BedingungCondition
Us grüngreen
Sensorversorgung aktivsensor supply active
BF rotred
Busfehlerbus error
DIA rotred
Moduldiagnose (Sensorkurzschluss / Sensorüberlast)module diagnostics (sensor short-circuit / sensor overload)
DiagnoseanzeigeDiagnostic indication
ULgrüngreen
Modulelektronikversorgung aktivmodule electronic supply active
1 = interne Signaleinternal signals
1 = GNDI 1
2 = Line A3 = n.c.4 = Line B5 = n.c.6 = VCCI 1
7 = +24 V8 = GND (0 V)9 = Erde / earth10 = n.c.11 = n.c.12 = RTS 1
Gehäuse / = Erde /housing earth
PinbelegungPin assignment
1 = +24 V2 = n.c.3 = GND (0 V)4 = IN5 = Erde / earth
Busanschluss M23 Eingang M12Bus connection M23 Input M12
4.11
Technische DatenSchutzart IP 67Umgebungstemperatur 0°C / +60°CGewicht 545 gGehäusematerial PUR
Bus-System ProfibusID-Nummer 044F hexGSD-Datei Lum_044F.gsdÜbertragungsrate max. 12 MBaudAdressbereich 1–126 dezDrehadressierschalter 1–99 dezVoreingestellte Adresse 99 dez
Elektronik-Stromversorgung UL
Nennspannung 24 V DCSpannungsbereich 19–30 V DCStromaufnahme typ. 60 mAVerpolschutz jaAnzeige LED grün
Sensorik-Stromversorgung US
Spannungsbereich min. (UL - 1,5 V)Gesamtstrom aller Sensoren max. 800 mAKurzschlussfest jaAnzeige LED grün
Eingänge Typ 3 gem. IEC 61131-2Nenneingangsspannung 24 V DCSignalzustand "1" 11–30 VSignalzustand "0" -3–5 VEingangsstrom bei 24 V typ. 6 mAKanaltyp Schließer p-schaltendAnzahl der digitalen Kanäle 8Statusanzeige LED gelb pro Kanal
Lieferumfang / ZubehörM12-Schutzkappen jaBeschriftungsschilder ja
Anschlusshinweis siehe Ende des Kapitels
Technical dataDegree of protection IP 67Operating temperature range 0°C / +60°CWeight 545 gHousing material PUR
Bus system ProfibusID number 044F hexGSD file Lum_044F.gsdTransmission rate max. 12 MBaudAddress range 1–126 decRotary address switches 1–99 decDefault address 99 dec
Electronics power supply UL
Rated voltage 24 V DCVoltage range 19–30 V DCPower consumption typ. 60 mAReverse polarity protection yesIndication LED green
Input power supply US
Voltage range min. (UL - 1.5 V)Total current of all sensors max. 800 mAShort circuit-proof yesIndication LED green
Inputs Type 3 acc. to IEC 61131-2Rated input voltage 24 V DCSignal state "1" 11–30 VSignal state "0" -3–5 VInput current at 24 V typ. 6 mAChannel type N.O. p-switchingNumber of digital channels 8Channel status indicator LED yellow per channel
Included in delivery / accessoriesDust covers M12 yesAttachable labels yes
Connecting information please see end of chapter
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es0970 PSL 213
BestellbezeichnungDesignation
Funktionsgleiches Modul ist auch ohne Drehadressierschalter Functionally identical module is also available without erhältich: Bestellbezeichnung 0970 PSL 201 rotary address switches: designation 0970 PSL 201
4.12
0970 PSL 111 16 In
Profibus-DP-Teilnehmer mit 16 digitalen Eingängen zumAnschluss von Standard-Sen-soren, kombinierte FIXCON-/M12-Buchse, Drehadressier-schalter zur Adresseinstellung,M12-Busanschluss
Profibus-DP device with 16 digital inputs to connectstandard sensors, combinedFIXCON/M12 socket, rotaryaddress switches for address-ing, M12 bus connection
Byte 0 Byte 1
Lage der Diagnose-Bits siehe SystembeschreibungFor the position of the diagnostic bits please see system description
DiagnosebyteDiagnostic byte
Bit Bit0 412
Sensor1A2A3A
Diagnose / DiagnosisSensor-Overload
345
4A5A6A
67
7A8A
Bit012
Sensor1B2B3B
345
4B5B6B
67
7B8B
BitbelegungBit assignment
gelbyellow1..8 A/B Kanalstatus
channel status
LED AnzeigeIndication
BedingungCondition
Us grüngreen
Sensorversorgung aktivsensor supply active
BF rotred
Busfehlerbus error
DIA rotred
Moduldiagnose (Sensorkurzschluss / Sensorüberlast)module diagnostics (sensor short-circuit / sensor overload)
DiagnoseanzeigeDiagnostic indication
ULgrüngreen
Modulelektronikversorgung aktivmodule electronic supply active
1 = interne Signaleinternal signals
2 = System/Sensoriksystem/sensors
1 = +5 V 1
2 = Line A3 = GND (0 V) 1
4 = Line B5 = Erde / earth
PinbelegungPin assignment
1 = Erde / earth2 = n.c.3 = n.c.4 = +24 V 2
5 = GND (0 V) 2
6 = n.c.
1 = +24 V2 = IN B3 = GND (0 V)4 = IN A5 = Erde / earth
Busanschluss M12 Spannungsversorgung M23 Eingang M12Bus connection M12 Power supply M23 Input M12
4.13
Technische DatenSchutzart IP 67Umgebungstemperatur 0°C / +60°CGewicht 535 gGehäusematerial PUR
Bus-System ProfibusID-Nummer 044E hexGSD-Datei Lum_044E.gsdÜbertragungsrate max. 12 MBaudAdressbereich 1–126 dezDrehadressierschalter 1–99 dezVoreingestellte Adresse 99 dez
Elektronik-Stromversorgung UL
Nennspannung 24 V DCSpannungsbereich 19–30 V DCStromaufnahme typ. 60 mAVerpolschutz jaAnzeige LED grün
Sensorik-Stromversorgung US
Spannungsbereich min. (UL - 1,5 V)Gesamtstrom aller Sensoren max. 800 mAKurzschlussfest jaAnzeige LED grün
Eingänge Typ 3 gem. IEC 61131-2Nenneingangsspannung 24 V DCSignalzustand "1" 11–30 VSignalzustand "0" -3–5 VEingangsstrom bei 24 V typ. 6 mAKanaltyp Schließer p-schaltendAnzahl der digitalen Kanäle 16Statusanzeige LED gelb pro Kanal
Lieferumfang / ZubehörM12-Schutzkappen jaBeschriftungsschilder ja
Anschlusshinweis siehe Ende des Kapitels
Technical dataDegree of protection IP 67Operating temperature range 0°C / +60°CWeight 535 gHousing material PUR
Bus system ProfibusID number 044E hexGSD file Lum_044E.gsdTransmission rate max. 12 MBaudAddress range 1–126 decRotary address switches 1–99 decDefault address 99 dec
Electronics power supply UL
Rated voltage 24 V DCVoltage range 19–30 V DCPower consumption typ. 60 mAReverse polarity protection yesIndication LED green
Input power supply US
Voltage range min. (UL - 1.5 V)Total current of all sensors max. 800 mAShort circuit-proof yesIndication LED green
Inputs Type 3 acc. to IEC 61131-2Rated input voltage 24 V DCSignal state "1" 11–30 VSignal state "0" -3–5 VInput current at 24 V typ. 6 mAChannel type N.O. p-switchingNumber of digital channels 16Channel status indicator LED yellow per channel
Included in delivery / accessoriesDust covers M12 yesAttachable labels yes
Connecting information please see end of chapter
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es0970 PSL 111
BestellbezeichnungDesignation
��
Funktionsgleiches Modul ist auch ohne Drehadressierschalter Functionally identical module is also available without erhältich: Bestellbezeichnung 0970 PSL 109 rotary address switches: designation 0970 PSL 109
4.14
0970 PSL 209 16 In
Profibus-DP-Teilnehmer mit 16 digitalen Eingängen zumAnschluss von Standard-Sen-soren, kombinierte FIXCON-/M12-Buchse, Drehadressier-schalter zur Adresseinstellung,M23-Busanschluss
Profibus-DP device with 16 digital inputs to connectstandard sensors, combinedFIXCON/M12 socket, rotaryaddress switches for address-ing, M23 bus connection
Byte 0 Byte 1
Lage der Diagnose-Bits siehe SystembeschreibungFor the position of the diagnostic bits please see system description
DiagnosebyteDiagnostic byte
Bit Bit0 412
Sensor1A2A3A
Diagnose / DiagnosisSensor-Overload
345
4A5A6A
67
7A8A
Bit012
Sensor1B2B3B
345
4B5B6B
67
7B8B
BitbelegungBit assignment
gelbyellow1..8 A/B Kanalstatus
channel status
LED AnzeigeIndication
BedingungCondition
Us grüngreen
Sensorversorgung aktivsensor supply active
BF rotred
Busfehlerbus error
DIA rotred
Moduldiagnose (Sensorkurzschluss / Sensorüberlast)module diagnostics (sensor short-circuit / sensor overload)
DiagnoseanzeigeDiagnostic indication
ULgrüngreen
Modulelektronikversorgung aktivmodule electronic supply active
1 = interne Signaleinternal signals
1 = GNDI 1
2 = Line A3 = n.c.4 = Line B5 = n.c.6 = VCCI 1
7 = +24 V8 = GND (0 V)9 = Erde / earth10 = n.c.11 = n.c.12 = RTS 1
Gehäuse / = Erde /housing earth
PinbelegungPin assignment
1 = +24 V2 = IN B3 = GND (0 V)4 = IN A5 = Erde / earth
Busanschluss M23 Eingang M12Bus connection M23 Input M12
4.15
Technische DatenSchutzart IP 67Umgebungstemperatur 0°C / +60°CGewicht 545 gGehäusematerial PUR
Bus-System ProfibusID-Nummer 044E hexGSD-Datei Lum_044E.gsdÜbertragungsrate max. 12 MBaudAdressbereich 1–126 dezDrehadressierschalter 1–99 dezVoreingestellte Adresse 99 dez
Elektronik-Stromversorgung UL
Nennspannung 24 V DCSpannungsbereich 19–30 V DCStromaufnahme typ. 60 mAVerpolschutz jaAnzeige LED grün
Sensorik-Stromversorgung US
Spannungsbereich min. (UL - 1,5 V)Gesamtstrom aller Sensoren max. 800 mAKurzschlussfest jaAnzeige LED grün
Eingänge Typ 3 gem. IEC 61131-2Nenneingangsspannung 24 V DCSignalzustand "1" 11 –30 VSignalzustand "0" -3–5 VEingangsstrom bei 24 V typ. 6 mAKanaltyp Schließer p-schaltendAnzahl der digitalen Kanäle 16Statusanzeige LED gelb pro Kanal
Lieferumfang / ZubehörM12-Schutzkappen jaBeschriftungsschilder ja
Anschlusshinweis siehe Ende des Kapitels
Technical dataDegree of protection IP 67Operating temperature range 0°C / +60°CWeight 545 gHousing material PUR
Bus system ProfibusID number 044E hexGSD file Lum_044E.gsdTransmission rate max. 12 MBaudAddress range 1–126 decRotary address switches 1–99 decDefault address 99 dec
Electronics power supply UL
Rated voltage 24 V DCVoltage range 19–30 V DCPower consumption typ. 60 mAReverse polarity protection yesIndication LED green
Input power supply US
Voltage range min. (UL - 1.5 V)Total current of all sensors max. 800 mAShort circuit-proof yesIndication LED green
Inputs Type 3 acc. to IEC 61131-2Rated input voltage 24 V DCSignal state "1" 11–30 VSignal state "0" -3–5 VInput current at 24 V typ. 6 mAChannel type N.O. p-switchingNumber of digital channels 16Channel status indicator LED yellow per channel
Included in delivery / accessoriesDust covers M12 yesAttachable labels yes
Connecting information please see end of chapter
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es0970 PSL 209
BestellbezeichnungDesignation
Funktionsgleiches Modul ist auch ohne Drehadressierschalter Functionally identical module is also available without erhältich: Bestellbezeichnung 0970 PSL 204 rotary address switches: designation 0970 PSL 204
4.16
0970 PSL 112 8 Out
Profibus-DP-Teilnehmer mit 8 digitalen Ausgängen zumAnschluss von Standard-Aktoren, kombinierte FIXCON-/M12-Buchse, Drehadressier-schalter zur Adresseinstellung,M12-Busanschluss
Profibus-DP device with 8 digital outputs to connectstandard actuators, combinedFIXCON/M12 socket, rotaryaddress switches for address-ing, M12 bus connection
Byte 0
Lage der Diagnose-Bits siehe SystembeschreibungFor the position of the diagnostic bits please see system description
DiagnosebyteDiagnostic byte
Bit Bit0 51 62
Actuator123
Diagnose / DiagnosisActuator-OverloadLow-Voltage-Detection
345
456
67
78
BitbelegungBit assignment
gelbyellow1..8 A Kanalstatus
channel status
LED AnzeigeIndication
BedingungCondition
1..8 rotred
Aktorkurzschlussactuator short-circuit
ULgrüngreen
Modulelektronikversorgung aktivmodule electronic supply active
DIA rotred
Moduldiagnose (Aktorunterspannung /Aktorkurzschluss / Aktorüberlast)module diagnostics (actuator low voltage /actuator short-circuit / actuator overload)
BF rotred
Busfehlerbus error
DiagnoseanzeigeDiagnostic indication
Us grüngreen
Aktorversorgung aktivactuator supply active
1 = interne Signaleinternal signals
2 = Aktorikactuators
3 = Systemsystem
1 = +5 V 1
2 = Line A3 = GND (0 V) 1
4 = Line B5 = Erde / earth
PinbelegungPin assignment
1 = Erde / earth2 = +24 V 2
3 = GND (0 V) 2
4 = +24 V 3
5 = GND (0 V) 3
6 = n.c.
1 = n.c.2 = n.c.3 = GND (0 V)4 = OUT5 = Erde / earth
Busanschluss M12 Spannungsversorgung M23 Ausgang M12Bus connection M12 Power supply M23 Output M12
4.17
Technische DatenSchutzart IP 67Umgebungstemperatur 0°C / +60°CGewicht 535 gGehäusematerial PUR
Bus-System ProfibusID-Nummer 044D hexGSD-Datei Lum_044D.gsdÜbertragungsrate max. 12 MBaudAdressbereich 1–126 dezDrehadressierschalter 1–99 dezVoreingestellte Adresse 99 dez
Elektronik-Stromversorgung UL
Nennspannung 24 V DCSpannungsbereich 19–30 V DCStromaufnahme typ. 60 mAVerpolschutz jaAnzeige LED grün
Aktorik-Stromversorgung US
Nennspannung 24 V DCSpannungsbereich 19–30 V DCPotentialtrennung vorhandenVerpolschutz ja/AntiparalleldiodeAnzeige LED grün
Ausgänge Typ 2 A gem. IEC 61131-2Nennausgangsstrom 2 A pro KanalKurzschlussfest jaMax. Strombelastbarkeit 15 A pro ModulÜberlastfest jaAnzahl der digitalen Kanäle 8Kanaltyp Schließer p-schaltendStatusanzeige LED gelb pro KanalDiagnoseanzeige LED rot pro Kanal
Lieferumfang / ZubehörM12-Schutzkappen jaBeschriftungsschilder ja
Anschlusshinweis siehe Ende des Kapitels
Technical dataDegree of protection IP 67Operating temperature range 0°C / +60°CWeight 535 gHousing material PUR
Bus system ProfibusID number 044D hexGSD file Lum_044D.gsdTransmission rate max. 12 MBaudAddress range 1–126 decRotary address switches 1–99 decDefault address 99 dec
Electronics power supply UL
Rated voltage 24 V DCVoltage range 19–30 V DCPower consumption typ. 60 mAReverse polarity protection yesIndication LED green
Output power supply US
Rated voltage 24 V DCVoltage range 19–30 V DCPotential separation presentReverse polarity protection yes/antiparallel diodeIndication LED green
Outputs Type 2 A acc. to IEC 61131-2Rated output current 2 A per channelShort circuit-proof yesMax. output current 15 A per moduleOverload-proof yesNumber of digital channels 8Channel type N.O. p-switchingChannel status indicator LED yellow per channelDiagnostic indication LED red per channel
Included in delivery / accessoriesDust covers M12 yesAttachable labels yes
Connecting information please see end of chapter
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es0970 PSL 112
BestellbezeichnungDesignation
��
Funktionsgleiches Modul ist auch ohne Drehadressierschalter Functionally identical module is also available without erhältich: Bestellbezeichnung 0970 PSL 108 rotary address switches: designation 0970 PSL 108
4.18
0970 PSL 210 8 Out
Profibus-DP-Teilnehmer mit 8 digitalen Ausgängen zumAnschluss von Standard-Aktoren, kombinierte FIXCON-/M12-Buchse, Drehadressier-schalter zur Adresseinstellung,M23-Busanschluss
Profibus-DP device with 8 digital outputs to connectstandard actuators, combinedFIXCON/M12 socket, rotaryaddress switches for address-ing, M23 bus connection
Byte 0
Lage der Diagnose-Bits siehe SystembeschreibungFor the position of the diagnostic bits please see system description
DiagnosebyteDiagnostic byte
Bit Bit0 51 62
Actuator123
Diagnose / DiagnosisActuator-OverloadLow-Voltage-Detection
345
456
67
78
BitbelegungBit assignment
gelbyellow1..8 A Kanalstatus
channel status
LED AnzeigeIndication
BedingungCondition
1..8 rotred
Aktorkurzschlussactuator short-circuit
ULgrüngreen
Modulelektronikversorgung aktivmodule electronic supply active
DIA rotred
Moduldiagnose (Aktorunterspannung /Aktorkurzschluss / Aktorüberlast)module diagnostics (actuator low voltage /actuator short-circuit / actuator overload)
BF rotred
Busfehlerbus error
DiagnoseanzeigeDiagnostic indication
Us grüngreen
Aktorversorgung aktivactuator supply active
1 = interne Signaleinternal signals
1 = GNDI 1
2 = Line A3 = n.c.4 = Line B5 = n.c.6 = VCCI 1
7 = +24 V8 = GND (0 V)9 = Erde / earth10 = n.c.11 = n.c.12 = RTS 1
Gehäuse / = Erde /housing earth
PinbelegungPin assignment
1 = Erde / earth2 = +24 V3 = GND (0 V)4 = n.c.5 = n.c.6 = n.c.
1 = n.c.2 = n.c.3 = GND (0 V)4 = OUT5 = Erde / earth
Busanschluss M23 Aktorversorgung M23 Ausgang M12Bus connection M23 Actuator supply M23 Output M12
4.19
Technische DatenSchutzart IP 67Umgebungstemperatur 0°C / +60°CGewicht 545 gGehäusematerial PUR
Bus-System ProfibusID-Nummer 044D hexGSD-Datei Lum_044D.gsdÜbertragungsrate max. 12 MBaudAdressbereich 1–126 dezDrehadressierschalter 1–99 dezVoreingestellte Adresse 99 dez
Elektronik-Stromversorgung UL
Nennspannung 24 V DCSpannungsbereich 19–30 V DCStromaufnahme typ. 60 mAVerpolschutz jaAnzeige LED grün
Aktorik-Stromversorgung US
Nennspannung 24 V DCSpannungsbereich 19–30 V DCPotentialtrennung vorhandenVerpolschutz ja/AntiparalleldiodeAnzeige LED grün
Ausgänge Typ 2 A gem. IEC 61131-2Nennausgangsstrom 2 A pro KanalKurzschlussfest jaMax. Strombelastbarkeit 15 A pro ModulÜberlastfest jaAnzahl der digitalen Kanäle 8Kanaltyp Schließer p-schaltendStatusanzeige LED gelb pro KanalDiagnoseanzeige LED rot pro Kanal
Lieferumfang / ZubehörM12-Schutzkappen jaBeschriftungsschilder ja
Anschlusshinweis siehe Ende des Kapitels
Technical dataDegree of protection IP 67Operating temperature range 0°C / +60°CWeight 545 gHousing material PUR
Bus system ProfibusID number 044D hexGSD file Lum_044D.gsdTransmission rate max. 12 MBaudAddress range 1–126 decRotary address switches 1–99 decDefault address 99 dec
Electronics power supply UL
Rated voltage 24 V DCVoltage range 19–30 V DCPower consumption typ. 60 mAReverse polarity protection yesIndication LED green
Output power supply US
Rated voltage 24 V DCVoltage range 19–30 V DCPotential separation presentReverse polarity protection yes/antiparallel diodeIndication LED green
Outputs Type 2 A acc. to IEC 61131-2Rated output current 2 A per channelShort circuit-proof yesMax. output current 15 A per moduleOverload-proof yesNumber of digital channels 8Channel type N.O. p-switchingChannel status indicator LED yellow per channelDiagnostic indication LED red per channel
Included in delivery / accessoriesDust covers M12 yesAttachable labels yes
Connecting information please see end of chapter
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es0970 PSL 210
BestellbezeichnungDesignation
Funktionsgleiches Modul ist auch ohne Drehadressierschalter Functionally identical module is also available without erhältich: Bestellbezeichnung 0970 PSL 203 rotary address switches: designation 0970 PSL 203
4.20
0970 PSL 124 16 Out
Profibus-DP-Teilnehmer mit16 digitalen Ausgängen (0,5 A)zum Anschluss von Standard-Aktoren, kombinierte FIXCON-/M12-Buchse, Drehadressier-schalter zur Adresseinstellung,M12-Busanschluss
Profibus-DP device with 16 digital outputs (0.5 A) toconnect standard actuators,combined FIXCON/M12 socket,rotary address switches foraddressing, M12 bus connec-tion
1 = interne Signaleinternal signals
2 = Aktorikactuators
3 = Systemsystem
1 = +5 V 1
2 = Line A3 = GND (0 V) 1
4 = Line B5 = Erde / earth
PinbelegungPin assignment
1 = Erde / earth2 = +24 V 2
3 = GND (0 V) 2
4 = +24 V 3
5 = GND (0 V) 3
6 = n.c.
1 = n.c.2 = OUT B3 = GND (0 V)4 = OUT A5 = Erde / earth
Busanschluss M12 System-/Aktorversorgung M23 Ausgang M12Bus connection M12 Systems/Actuator supply M23 Output M12
gelbyellow1..8 A/B Kanalstatus
channel status
LED AnzeigeIndication
BedingungCondition
1..8 A/B rotred
Aktorkurzschlussactuator short-circuit
ULgrüngreen
Modulelektronikversorgung aktivmodule electronic supply active
DIA rotred
Moduldiagnose (Aktorunterspannung /Aktorkurzschluss / Aktorüberlast)module diagnostics (actuator low voltage /actuator short-circuit / actuator overload)
BF rotred
Busfehlerbus error
DiagnoseanzeigeDiagnostic indication
Us grüngreen
Aktorversorgung aktivactuator supply active
Byte 0 Byte 1
Lage der Diagnose-Bits siehe SystembeschreibungFor the position of the diagnostic bits please see system description
DiagnosebyteDiagnostic byte
Bit Bit0 51 62
Actuator1A2A3A
Diagnose / DiagnosisActuator-OverloadLow-Voltage-Detection
345
4A5A6A
67
7A8A
Bit012
Actuator1B2B3B
345
4B5B6B
67
7B8B
BitbelegungBit assignment
4.21
Technische DatenSchutzart IP 67Umgebungstemperatur 0°C / +60°CGewicht 535 gGehäusematerial PUR
Bus-System ProfibusID-Nummer 06EA hexGSD-Datei Lum_06EA.gsdÜbertragungsrate max. 12 MBaudAdressbereich 1–126 dezDrehadressierschalter 1–99 dezVoreingestellte Adresse 99 dez
Elektronik-Stromversorgung UL
Nennspannung 24 V DCSpannungsbereich 19–30 V DCStromaufnahme typ. 60 mAVerpolschutz jaAnzeige LED grün
Aktorik-Stromversorgung US
Nennspannung 24 V DCSpannungsbereich 19–30 V DCPotentialtrennung vorhandenVerpolschutz ja/AntiparalleldiodeAnzeige LED grün
Ausgänge Typ 0,5 A gem. IEC 61131-2Nennausgangsstrom 0,7 A pro KanalKurzschlussfest jaMax. Strombelastbarkeit 11,2 A pro ModulÜberlastfest jaAnzahl der digitalen Kanäle 16Kanaltyp Schließer p-schaltendStatusanzeige LED gelb pro KanalDiagnoseanzeige LED rot pro Kanal
Lieferumfang / ZubehörM12-Schutzkappen jaBeschriftungsschilder ja
Anschlusshinweis siehe Ende des Kapitels
Technical dataDegree of protection IP 67Operating temperature range 0°C / +60°CWeight 535 gHousing material PUR
Bus system ProfibusID number 06EA hexGSD file Lum_06EA.gsdTransmission rate max. 12 MBaudAddress range 1–126 decRotary address switches 1–99 decDefault address 99 dec
Electronics power supply UL
Rated voltage 24 V DCVoltage range 19–30 V DCPower consumption typ. 60 mAReverse polarity protection yesIndication LED green
Output power supply US
Rated voltage 24 V DCVoltage range 19–30 V DCPotential separation presentReverse polarity protection yes/antiparallel diodeIndication LED green
Outputs Type 0.5 A acc. to IEC 61131-2Rated output current 0.7 A per channelShort circuit-proof yesMax. output current 11.2 A per moduleOverload-proof yesNumber of digital channels 16Channel type N.O. p-switchingChannel status indicator LED yellow per channelDiagnostic indication LED red per channel
Included in delivery / accessoriesDust covers M12 yesAttachable labels yes
Connecting information please see end of chapter
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es
0970 PSL 124
BestellbezeichnungDesignation
��
4.22
0970 PSL 215 16 Out
Profibus-DP-Teilnehmer mit16 digitalen Ausgängen (0,5 A)zum Anschluss von Standard-Aktoren, kombinierte FIXCON-/M12-Buchse, Drehadressier-schalter zur Adresseinstellung,M23-Busanschluss
Profibus-DP device with 16 digital outputs (0.5 A) toconnect standard actuators,combined FIXCON/M12 socket,rotary address switches foraddressing, M23 bus connec-tion
gelbyellow1..8 A/B Kanalstatus
channel status
LED AnzeigeIndication
BedingungCondition
1..8 A/B rotred
Aktorkurzschlussactuator short-circuit
ULgrüngreen
Modulelektronikversorgung aktivmodule electronic supply active
DIA rotred
Moduldiagnose (Aktorunterspannung /Aktorkurzschluss / Aktorüberlast)module diagnostics (actuator low voltage /actuator short-circuit / actuator overload)
BF rotred
Busfehlerbus error
DiagnoseanzeigeDiagnostic indication
Us grüngreen
Aktorversorgung aktivactuator supply active
1 = interne Signaleinternal signals
1 = GNDI 1
2 = Line A3 = n.c.4 = Line B5 = n.c.6 = VCCI 1
7 = +24 V8 = GND (0 V)9 = Erde / earth10 = n.c.11 = n.c.12 = RTS 1
Gehäuse / = Erde /housing earth
PinbelegungPin assignment
1 = Erde / earth2 = +24 V3 = GND (0 V)4 = n.c.5 = n.c.6 = n.c.
1 = n.c.2 = OUT B3 = GND (0 V)4 = OUT A5 = Erde / earth
Busanschluss M23 Aktorversorgung M23 Ausgang M12Bus connection M23 Actuator supply M23 Output M12
Byte 0 Byte 1
Lage der Diagnose-Bits siehe SystembeschreibungFor the position of the diagnostic bits please see system description
DiagnosebyteDiagnostic byte
Bit Bit0 51 62
Actuator1A2A3A
Diagnose / DiagnosisActuator-OverloadLow-Voltage-Detection
345
4A5A6A
67
7A8A
Bit012
Actuator1B2B3B
345
4B5B6B
67
7B8B
BitbelegungBit assignment
4.23
Technische DatenSchutzart IP 67Umgebungstemperatur 0°C / +60°CGewicht 535 gGehäusematerial PUR
Bus-System ProfibusID-Nummer 06EA hexGSD-Datei Lum_06EA.gsdÜbertragungsrate max. 12 MBaudAdressbereich 1–126 dezDrehadressierschalter 1–99 dezVoreingestellte Adresse 99 dez
Elektronik-Stromversorgung UL
Nennspannung 24 V DCSpannungsbereich 19–30 V DCStromaufnahme typ. 60 mAVerpolschutz jaAnzeige LED grün
Aktorik-Stromversorgung US
Nennspannung 24 V DCSpannungsbereich 19–30 V DCPotentialtrennung vorhandenVerpolschutz ja/AntiparalleldiodeAnzeige LED grün
Ausgänge Typ 0,5 A gem. IEC 61131-2Nennausgangsstrom 0,7 A pro KanalKurzschlussfest jaMax. Strombelastbarkeit 11,2 A pro ModulÜberlastfest jaAnzahl der digitalen Kanäle 16Kanaltyp Schließer p-schaltendStatusanzeige LED gelb pro KanalDiagnoseanzeige LED rot pro Kanal
Lieferumfang / ZubehörM12-Schutzkappen jaBeschriftungsschilder ja
Anschlusshinweis siehe Ende des Kapitels
Technical dataDegree of protection IP 67Operating temperature range 0°C / +60°CWeight 535 gHousing material PUR
Bus system ProfibusID number 06EA hexGSD file Lum_06EA.gsdTransmission rate max. 12 MBaudAddress range 1–126 decRotary address switches 1–99 decDefault address 99 dec
Electronics power supply UL
Rated voltage 24 V DCVoltage range 19–30 V DCPower consumption typ. 60 mAReverse polarity protection yesIndication LED green
Output power supply US
Rated voltage 24 V DCVoltage range 19–30 V DCPotential separation presentReverse polarity protection yes/antiparallel diodeIndication LED green
Outputs Type 0.5 A acc. to IEC 61131-2Rated output current 0.7 A per channelShort-circuit proof yesMax. output current 11.2 A per moduleOverload-proof yesNumber of digital channels 16Channel type N.O. p-switchingChannel status indicator LED yellow per channelDiagnostic indication LED red per channel
Included in delivery / accessoriesDust covers M12 yesAttachable labels yes
Connecting information please see end of chapter
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es
0970 PSL 215
BestellbezeichnungDesignation
4.24
0970 PSL 113 8 In / 4 Out
Profibus-DP-Teilnehmer mit 8 digitalen Eingängen zum An-schluss von Standard-Sensorenund 4 digitalen Ausgängenzum Anschluss von Standard-Aktoren, kombinierte FIXCON-/M12-Buchse, Drehadressier-schalter zur Adresseinstellung,M12-Busanschluss
Profibus-DP device with 8 digital inputs to connectstandard sensors and 4 digitaloutputs to connect standardactuators, combined FIXCON/M12 socket, rotary addressswitches for addressing, M12 bus connection
Byte 0 Byte 0
Lage der Diagnose-Bits siehe SystembeschreibungFor the position of the diagnostic bits please see system description
DiagnosebyteDiagnostic byte
Bit Bit0 41 52
Actuator246 6
Diagnose / DiagnosisSensor-OverloadActuator-OverloadLow-Voltage-Detection
345
8––
67
––
Bit012
Sensor1A3A5A
345
7A1B3B
67
5B7B
BitbelegungBit assignment
gelbyellow
1,3,5,7 A/B2,4,6,8 A
Kanalstatuschannel status
LED AnzeigeIndication
BedingungCondition
2,4,6,8 rotred
Aktorkurzschlussactuator short-circuit
ULgrüngreen
Modulelektronikversorgung aktivmodule electronic supply active
DIA rotred
Moduldiagnose (Sensorkurzschluss / Sensorüberlast /Aktorunterspannung /Aktorkurzschluss / Aktorüberlast)module diagnostics (sensor short-circuit / sensor overload / actuator low voltage / actuator short-circuit /actuator overload)
BF rotred
Busfehlerbus error
DiagnoseanzeigeDiagnostic indication
Us grüngreen
Aktorversorgung aktivactuator supply active
1 = interne Signaleinternal signals
2 = Aktorikactuators
3 = System/Sensoriksystem/sensors
1 = +5 V 1
2 = Line A3 = GND (0 V) 1
4 = Line B5 = Erde / earth
PinbelegungPin assignment
1 = Erde / earth2 = +24 V 2
3 = GND (0 V) 2
4 = +24 V 3
5 = GND (0 V) 3
6 = n.c.
1 = +24 V2 = IN B3 = GND (0 V)4 = IN A5 = Erde / earth
1 = n.c.2 = n.c.3 = GND (0 V)4 = OUT5 = Erde / earth
Busanschluss M12 Spannungsversorgung M23 Ein-/Ausgang M12Bus connection M12 Power supply M23 Input/Output M12
4.25
Technische DatenSchutzart IP 67Umgebungstemperatur 0°C / +60°CGewicht 535 gGehäusematerial PUR
Bus-System ProfibusID-Nummer 0450 hexGSD-Datei Lum_0450.gsd Übertragungsrate max. 12 MBaudAdressbereich 1–126 dezDrehadressierschalter 1–99 dezVoreingestellte Adresse 99 dez
Elektronik-Stromversorgung UL
Nennspannung 24 V DCSpannungsbereich 19–30 V DCStromaufnahme typ. 60 mAVerpolschutz jaAnzeige LED grün
Sensorik-StromversorgungSpannungsbereich min. (UL - 1,5 V)Gesamtstrom aller Sensoren max. 800 mAKurzschlussfest ja
Eingänge Typ 3 gem. IEC 61131-2Nenneingangsspannung 24 V DCSignalzustand "1" 11–30 VSignalzustand "0" -3–5 VEingangsstrom bei 24V typ. 6 mAKanaltyp Schließer p-schaltendAnzahl der digitalen Kanäle 8Statusanzeige LED gelb pro Kanal
Aktorik-Stromversorgung US
Nennspannung 24 V DCSpannungsbereich 19–30 V DCPotentialtrennung vorhandenVerpolschutz ja/AntiparalleldiodeAnzeige LED grün
Ausgänge Typ 2 A gem. IEC 61131-2Nennausgangsstrom 2 A pro KanalKurzschlussfest jaMax. Strombelastbarkeit 8 A pro ModulÜberlastfest jaAnzahl der digitalen Kanäle 4Kanaltyp Schließer p-schaltendStatusanzeige LED gelb pro KanalDiagnoseanzeige LED rot pro Kanal
Lieferumfang / ZubehörM12-Schutzkappen jaBeschriftungsschilder ja
Anschlusshinweis siehe Ende des Kapitels
Technical dataDegree of protection IP 67Operating temperature range 0°C / +60°CWeight 535 gHousing material PUR
Bus system ProfibusID number 0450 hexGSD file Lum_0450.gsd Transmission rate max. 12 MBaudAddress range 1–126 decRotary address switches 1–99 decDefault address 99 dec
Electronics power supply UL
Rated voltage 24 V DCVoltage range 19–30 V DCPower consumption typ. 60 mAReverse polarity protection yesIndication LED green
Input power supplyVoltage range min. (UL - 1.5 V)Total current of all sensors max. 800 mAShort circuit-proof yes
Inputs Type 3 acc. to IEC 61131-2Rated input voltage 24 V DCSignal state "1" 11–30 VSignal state "0" -3–5 VInput current at 24V typ. 6 mAChannel type N.O. p-switchingNumber of digital channels 8Channel status indicator LED yellow per channel
Output power supply US
Rated voltage 24 V DCVoltage range 19–30 V DCPotential separation presentReverse polarity protection yes/antiparallel diodeIndication LED green
Outputs Type 2 A acc. to IEC 61131-2Rated output current 2 A per channelShort circuit-proof yesMax. output current 8 A per moduleOverload-proof yesNumber of digital channels 4Channel type N.O. p-switchingChannel status indicator LED yellow per channelDiagnostic indication LED red per channel
Included in delivery / accessoriesDust covers M12 yesAttachable labels yes
Connecting information please see end of chapter
0970 PSL 113
BestellbezeichnungDesignation
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es
��
Funktionsgleiches Modul ist auch ohne Drehadressierschalter Function identical module is also available without erhältich: Bestellbezeichnung 0970 PSL 107 rotary address switches: designation 0970 PSL 107
4.26
Byte 0 Byte 0
Lage der Diagnose-Bits siehe SystembeschreibungFor the position of the diagnostic bits please see system description
DiagnosebyteDiagnostic byte
Bit Bit0 41 52
Actuator246 6
Diagnose / DiagnosisSensor-OverloadActuator-OverloadLow-Voltage-Detection
345
8––
67
––
Bit012
Sensor1A3A5A
345
7A1B3B
67
5B7B
BitbelegungBit assignment
0970 PSL 211 8 In / 4 Out
Profibus-DP-Teilnehmer mit 8 digitalen Eingängen zum An-schluss von Standard-Sensorenund 4 digitalen Ausgängenzum Anschluss von Standard-Aktoren, kombinierte FIXCON-/M12-Buchse, Drehadressier-schalter zur Adresseinstellung,M23-Busanschluss
Profibus-DP device with 8 digital inputs to connectstandard sensors and 4 digitaloutputs to connect standardactuators, combined FIXCON/M12 socket, rotary addressswitches for addressing, M23 bus connection
gelbyellow
1,3,5,7 A/B2,4,6,8 A
Kanalstatuschannel status
LED AnzeigeIndication
BedingungCondition
2,4,6,8 rotred
Aktorkurzschlussactuator short-circuit
ULgrüngreen
Modulelektronikversorgung aktivmodule electronic supply active
DIA rotred
Moduldiagnose (Sensorkurzschluss / Sensorüberlast /Aktorunterspannung /Aktorkurzschluss / Aktorüberlast)module diagnostics (sensor short-circuit / sensor overload / actuator low voltage / actuator short-circuit /actuator overload)
BF rotred
Busfehlerbus error
DiagnoseanzeigeDiagnostic indication
Us grüngreen
Aktorversorgung aktivactuator supply active
1 = interne Signaleinternal signals
1 = GNDI 1
2 = Line A3 = n.c.4 = Line B5 = n.c.6 = VCCI 1
7 = +24 V8 = GND (0 V)9 = Erde / earth10 = n.c.11 = n.c.12 = RTS 1
Gehäuse / = Erde /housing earth
PinbelegungPin assignment
1 = Erde / earth2 = +24 V3 = GND (0 V)4 = n.c.5 = n.c.6 = n.c.
1 = +24 V2 = IN B3 = GND (0 V)4 = IN A5 = Erde / earth
1 = n.c.2 = n.c.3 = GND (0 V)4 = OUT5 = Erde / earth
Busanschluss M23 Aktorversorgung M23 Ein-/Ausgang M12Bus connection M23 Actuator supply M23 Input/Output M12
4.27
Technical dataDegree of protection IP 67Operating temperature range 0°C / +60°CWeight 545 gHousing material PUR
Bus system ProfibusID number 0450 hexGSD file Lum_0450.gsdTransmission rate max. 12 MBaudAddress range 1–126 decRotary address switches 1–99 decDefault address 99 dec
Electronics power supply UL
Rated voltage 24 V DCVoltage range 19–30 V DCPower consumption typ. 60 mAReverse polarity protection yesIndication LED green
Input power supplyVoltage range min. (UL - 1.5 V)Total current of all sensors max. 800 mAShort circuit-proof yes
Inputs Type 3 acc. to IEC 61131-2Rated input voltage 24 V DCSignal state "1" 11–30 VSignal state "0" -3–5 VInput current at 24 V typ. 6 mAChannel type N.O. p-switchingNumber of digital channels 8Channel status indicator LED yellow per channel
Output power supply US
Rated voltage 24 V DCVoltage range 19–30 V DCPotential separation presentReverse polarity protection yes/antiparallel diodeIndication LED green
Outputs Type 2 A acc. to IEC 61131-2Rated output current 2 A per channelShort circuit-proof yesMax. output current 8 A per moduleOverload-proof yesNumber of digital channels 4Channel type N.O. p-switchingChannel status indicator LED yellow per channelDiagnostic indication LED red per channel
Included in delivery / accessoriesDust covers M12 yesAttachable labels yes
Connecting information please see end of chapter
0970 PSL 211
BestellbezeichnungDesignation
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
Funktionsgleiches Modul ist auch ohne Drehadressierschalter Function identical module is also available without erhältich: Bestellbezeichnung 0970 PSL 202 rotary address switches: designation 0970 PSL 202
Technische DatenSchutzart IP 67Umgebungstemperatur 0°C / +60°CGewicht 545 gGehäusematerial PUR
Bus-System ProfibusID-Nummer 0450 hexGSD-Datei Lum_0450.gsdÜbertragungsrate max. 12 MBaudAdressbereich 1–126 dezDrehadressierschalter 1–99 dezVoreingestellte Adresse 99 dez
Elektronik-Stromversorgung UL
Nennspannung 24 V DCSpannungsbereich 19–30 V DCStromaufnahme typ. 60 mAVerpolschutz jaAnzeige LED grün
Sensorik-StromversorgungSpannungsbereich min. (UL - 1,5 V)Gesamtstrom aller Sensoren max. 800 mAKurzschlussfest ja
Eingänge Typ 3 gem. IEC 61131-2Nenneingangsspannung 24 V DCSignalzustand "1" 11–30 VSignalzustand "0" -3–5 VEingangsstrom bei 24 V typ. 6 mAKanaltyp Schließer p-schaltendAnzahl der digitalen Kanäle 8Statusanzeige LED gelb pro Kanal
Aktorik-Stromversorgung US
Nennspannung 24 V DCSpannungsbereich 19–30 V DCPotentialtrennung vorhandenVerpolschutz ja/AntiparalleldiodeAnzeige LED grün
Ausgänge Typ 2 A gem. IEC 61131-2Nennausgangsstrom 2 A pro KanalKurzschlussfest jaMax. Strombelastbarkeit 8 A pro ModulÜberlastfest jaAnzahl der digitalen Kanäle 4Kanaltyp Schließer p-schaltendStatusanzeige LED gelb pro KanalDiagnoseanzeige LED rot pro Kanal
Lieferumfang / ZubehörM12-Schutzkappen jaBeschriftungsschilder ja
Anschlusshinweis siehe Ende des Kapitels
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es
4.28
0970 PSL 123 8 In / 8 Out
Profibus-DP-Teilnehmer mit 8 digitalen Eingängen zum An-schluss von Standard-Sensorenund 8 digitalen Ausgängen(0,5 A) zum Anschluss vonStandard-Aktoren, kombinier-te FIXCON-/M12-Buchse, Dreh-adressierschalter zur Adress-einstellung, M12-Busanschluss
Profibus-DP device with 8 digital inputs to connectstandard sensors and 8 digitaloutputs (0.5 A) to connectstandard actuators, combinedFIXCON/M12 socket, rotaryaddress switches for address-ing, M12 bus connection
Byte 0 Byte 0
Lage der Diagnose-Bits siehe SystembeschreibungFor the position of the diagnostic bits please see system description
DiagnosebyteDiagnostic byte
Bit Bit0 41 52
Actuator2A4A6A 6
Diagnose / DiagnosisSensor-OverloadActuator-OverloadLow-Voltage-Detection
345
8A2B4B
67
6B8B
Bit012
Sensor1A3A5A
345
7A1B3B
67
5B7B
BitbelegungBit assignment
BF rotred
Busfehlerbus error
gelbyellow1..8 A/B Kanalstatus
channel status
LED AnzeigeIndication
BedingungCondition
2,4,6,8 A/B rotred
Aktorkurzschlussactuator short-circuit
ULgrüngreen
Modulelektronikversorgung aktivmodule electronic supply active
DIA rotred
Moduldiagnose (Sensorkurzschluss / Sensorüberlast /Aktorunterspannung /Aktorkurzschluss / Aktorüberlast)module diagnostics (sensor short-circuit / sensor overload / actuator low voltage / actuator short-circuit /actuator overload)
DiagnoseanzeigeDiagnostic indication
Us grüngreen
Aktorversorgung aktivactuator supply active
1 = interne Signaleinternal signals
2 = Aktorikactuators
3 = Systemsystem
1 = +5 V 1
2 = Line A3 = GND (0 V) 1
4 = Line B5 = Erde / earth
PinbelegungPin assignment
1 = Erde / earth2 = +24 V 2
3 = GND (0 V) 2
4 = +24 V 3
5 = GND (0 V) 3
6 = n.c.
1 = +24 V2 = IN B3 = GND (0 V)4 = IN A5 = Erde / earth
1 = n.c.2 = OUT B3 = GND (0 V)4 = OUT A5 = Erde / earth
Busanschluss M12 System-/Aktorversorgung M23 Ein-/Ausgang M12Bus connection M12 Systems/Actuator supply M23 Input/Output M12
4.29
Technische DatenSchutzart IP 67Umgebungstemperatur 0°C / +60°CGewicht 535 gGehäusematerial PUR
Bus-System ProfibusID-Nummer 06E9 hexGSD-Datei Lum_06E9.gsdÜbertragungsrate max. 12 MBaudAdressbereich 1–126 dezDrehadressierschalter 1–99 dezVoreingestellte Adresse 99 dez
Elektronik-Stromversorgung UL
Nennspannung 24 V DCSpannungsbereich 19–30 V DCStromaufnahme typ. 60 mAVerpolschutz jaAnzeige LED grün
Sensorik-StromversorgungSpannungsbereich min. (UL - 1,5 V)Gesamtstrom aller Sensoren max. 800 mAKurzschlussfest ja
Eingänge Typ 3 gem. IEC 61131-2Nenneingangsspannung 24 V DCSignalzustand "1" 11–30 VSignalzustand "0" -3–5 VEingangsstrom bei 24 V typ. 6 mAKanaltyp Schließer p-schaltendAnzahl der digitalen Kanäle 8Statusanzeige LED gelb pro Kanal
Aktorik-Stromversorgung US
Nennspannung 24 V DCSpannungsbereich 19–30 V DCPotentialtrennung vorhandenVerpolschutz ja/AntiparalleldiodeAnzeige LED grün
Ausgänge Typ 0,5 A gem. IEC 61131-2Nennausgangsstrom 0,7 A pro KanalKurzschlussfest jaMax. Strombelastbarkeit 5,6 A pro ModulÜberlastfest jaAnzahl der digitalen Kanäle 8Kanaltyp Schließer p-schaltendStatusanzeige LED gelb pro KanalDiagnoseanzeige LED rot pro Kanal
Lieferumfang / ZubehörM12-Schutzkappen jaBeschriftungsschilder ja
Anschlusshinweis siehe Ende des Kapitels
Technical dataDegree of protection IP 67Operating temperature range 0°C / +60°CWeight 535 gHousing material PUR
Bus system ProfibusID number 06E9 hexGSD file Lum_06E9.gsdTransmission rate max. 12 MBaudAddress range 1–126 decRotary address switches 1–99 decDefault address 99 dec
Electronics power supply UL
Rated voltage 24 V DCVoltage range 19–30 V DCPower consumption typ. 60 mAReverse polarity protection yesIndication LED green
Input power supplyVoltage range min. (UL - 1.5 V)Total current of all sensors max. 800 mAShort circuit-proof yes
Inputs Type 3 acc. to IEC 61131-2Rated input voltage 24 V DCSignal state "1" 11–30 VSignal state "0" -3–5 VInput current at 24 V typ. 6 mAChannel type N.O. p-switchingNumber of digital channels 8Channel status indicator LED yellow per channel
Output power supply US
Rated voltage 24 V DCVoltage range 19–30 V DCPotential separation presentReverse polarity protection yes/antiparallel diodeIndication LED green
Outputs Type 0.5 A acc. to IEC 61131-2Rated output current 0.7 A per channelShort circuit-proof yesMax. output current 5.6 A per moduleOverload-proof yesNumber of digital channels 8Channel type N.O. p-switchingChannel status indicator LED yellow per channelDiagnostic indication LED red per channel
Included in delivery / accessoriesDust covers M12 yesAttachable labels yes
Connecting information please see end of chapter
0970 PSL 123
BestellbezeichnungDesignation
��
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es
4.30
0970 PSL 214 8 In / 8 Out
Profibus-DP-Teilnehmer mit 8 digitalen Eingängen zum An-schluss von Standard-Sensorenund 8 digitalen Ausgängen(0,5 A) zum Anschluss vonStandard-Aktoren, kombinier-te FIXCON-/M12-Buchse, Dreh-adressierschalter zur Adress-einstellung, M23-Busanschluss
Profibus-DP device with 8 digital inputs to connectstandard sensors and 8 digitaloutputs (0.5 A) to connectstandard actuators, combinedFIXCON/M12 socket, rotaryaddress switches for address-ing, M23 bus connection
BF rotred
Busfehlerbus error
gelbyellow1..8 A/B Kanalstatus
channel status
LED AnzeigeIndication
BedingungCondition
2,4,6,8 A/B rotred
Aktorkurzschlussactuator short-circuit
ULgrüngreen
Modulelektronikversorgung aktivmodule electronic supply active
DIA rotred
Moduldiagnose (Sensorkurzschluss / Sensorüberlast /Aktorunterspannung /Aktorkurzschluss / Aktorüberlast)module diagnostics (sensor short-circuit / sensor overload / actuator low voltage / actuator short-circuit /actuator overload)
DiagnoseanzeigeDiagnostic indication
Us grüngreen
Aktorversorgung aktivactuator supply active
1 = interne Signaleinternal signals
1 = GNDI 1
2 = Line A3 = n.c.4 = Line B5 = n.c.6 = VCCI 1
7 = +24 V8 = GND (0 V)9 = Erde / earth10 = n.c.11 = n.c.12 = RTS 1
Gehäuse / = Erde /housing earth
PinbelegungPin assignment
1 = Erde / earth2 = +24 V3 = GND (0 V)4 = n.c.5 = n.c.6 = n.c.
1 = +24 V2 = IN B3 = GND (0 V)4 = IN A5 = Erde / earth
1 = n.c.2 = OUT B3 = GND (0 V)4 = OUT A5 = Erde / earth
Busanschluss M23 Aktorversorgung M23 Ein-/Ausgang M12Bus connection M23 Actuator supply M23 Input/Output M12
Byte 0 Byte 0
Lage der Diagnose-Bits siehe SystembeschreibungFor the position of the diagnostic bits please see system description
DiagnosebyteDiagnostic byte
Bit Bit0 41 52
Actuator2A4A6A 6
Diagnose / DiagnosisSensor-OverloadActuator-OverloadLow-Voltage-Detection
345
8A2B4B
67
6B8B
Bit012
Sensor1A3A5A
345
7A1B3B
67
5B7B
BitbelegungBit assignment
4.31
Technische DatenSchutzart IP 67Umgebungstemperatur 0°C / +60°CGewicht 535 gGehäusematerial PUR
Bus-System ProfibusID-Nummer 06E9 hexGSD-Datei Lum_06E9.gsdÜbertragungsrate max. 12 MBaudAdressbereich 1–126 dezDrehadressierschalter 1–99 dezVoreingestellte Adresse 99 dez
Elektronik-Stromversorgung UL
Nennspannung 24 V DCSpannungsbereich 19–30 V DCStromaufnahme typ. 60 mAVerpolschutz jaAnzeige LED grün
Sensorik-StromversorgungSpannungsbereich min. (UL - 1,5 V)Gesamtstrom aller Sensoren max. 800 mAKurzschlussfest ja
Eingänge Typ 3 gem. IEC 61131-2Nenneingangsspannung 24 V DCSignalzustand "1" 11–30 VSignalzustand "0" -3–5 VEingangsstrom bei 24 V typ. 6 mAKanaltyp Schließer p-schaltendAnzahl der digitalen Kanäle 8Statusanzeige LED gelb pro Kanal
Aktorik-Stromversorgung US
Nennspannung 24 V DCSpannungsbereich 19–30 V DCPotentialtrennung vorhandenVerpolschutz ja/AntiparalleldiodeAnzeige LED grün
Ausgänge Typ 0,5 A gem. IEC 61131-2Nennausgangsstrom 0,7 A pro KanalKurzschlussfest jaMax. Strombelastbarkeit 5,6 A pro ModulÜberlastfest jaAnzahl der digitalen Kanäle 8Kanaltyp Schließer p-schaltendStatusanzeige LED gelb pro KanalDiagnoseanzeige LED rot pro Kanal
Lieferumfang / ZubehörM12-Schutzkappen jaBeschriftungsschilder ja
Anschlusshinweis siehe Ende des Kapitels
Technical dataDegree of protection IP 67Operating temperature range 0°C / +60°CWeight 535 gHousing material PUR
Bus system ProfibusID number 06E9 hexGSD file Lum_06E9.gsdTransmission rate max. 12 MBaudAddress range 1–126 decRotary address switches 1–99 decDefault address 99 dec
Electronics power supply UL
Rated voltage 24 V DCVoltage range 19–30 V DCPower consumption typ. 60 mAReverse polarity protection yesIndication LED green
Input power supplyVoltage range min. (UL - 1.5 V)Total current of all sensors max. 800 mAShort-circuit proof yes
Inputs Type 3 acc. to IEC 61131-2Rated input voltage 24 V DCSignal state "1" 11–30 VSignal state "0" -3–5 VInput current at 24 V typ. 6 mAChannel type N.O. p-switchingNumber of digital channels 8Channel status indicator LED yellow per channel
Output power supply US
Rated voltage 24 V DCVoltage range 19 –30 V DCPotential separation presentReverse polarity protection yes/antiparallel diodeIndication LED green
Outputs Type 0.5 A acc. to IEC 61131-2Rated output current 0.7 A per channelShort-circuit proof yesMax. output current 5.6 A per moduleOverload-proof yesNumber of digital channels 8Channel type N.O. p-switchingChannel status indicator LED yellow per channelDiagnostic indication LED red per channel
Included in delivery / accessoriesDust covers M12 yesAttachable labels yes
Connecting information please see end of chapter
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es
0970 PSL 214
BestellbezeichnungDesignation
4.32
Adressiergerät für Busteilneh-mer der Profibus-Standard-Serie, Adressierung über M12-I/O-Anschluss (Kanal 8) derModule
Handheld addressing devicefor bus users of the Profibusstandard series, addressing viaM12 I/O connection (channel8) of the modules
0903 UTL 101
4.33
InbetriebnahmeDie Module müssen zur Adressierung mit der System-/Sensor-versorgung verbunden sein. Bei Modulen mit Ausgangseinheitenmuss zusätzlich auch die Aktorversorgung anliegen. Der Ausgangder Buchse 8 darf nicht aktiv sein.
Adresse lesenREAD-Taste gedrückt halten, Blinkcode der ADDRESS-LED ablesen
Adresse schreibenGewünschte Adresse über Drehschalter einstellen (3-stellige Dezimalform).WRITE-Taste gedrückt halten (W/R LED an) bis W/R-LED ausgeht!
TastenRead Adresse lesenWrite Adresse schreiben, programmieren
DrehadressierschalterEingabe der Adresse in 3-stelliger DezimalformLinks 100er ZifferMitte 10er ZifferRechts 1er Ziffer
LEDs3 LEDs zur Ziffernanzeige, dezimalLED gelb, links 100er StelleLED gelb, mitte 10er StelleLED gelb, rechts 1er Stelle
LEDs zur Statusanzeige des GerätesLED grün GerätestatusLED an Gerät o.k. LED an, dimmen bis aus Batteriespannung zu niedrig
LED gelb: KommunikationLED an Telegrammtransfer auf der
Verbindungsleitung
LED rot: FehleranzeigeLED an allgemeiner FehlerLED blinkt ungültige Adresse (1–126 dezimal)
CommissioningThe modules need to be supplied with the system and sensorpower supply. For modules with outputs the auxiliary power supply needs to be connected. The output on socket 8 must notbe active.
Reading an addressKeep READ key pressed, read flashing code of the ADDRESS-LED
Writing an addressSet address desired via rotary switch (3-digit decimal form).Keep WRITE key pressed (W/R LED on) until W/R-LED extinguishes!
KeysRead read addressWrite write address, programming
Rotary addressing switchesinput of the address in 3-digit decimal formleft hundreds digitmiddle tens digitright units digit
LEDs3 LEDs for display of digits, decimalLED yellow, left hundreds digitLED yellow, middle tens digitLED yellow, right units digit
LEDs for the status indication of the unitsLED green status of the unitLED on unit o.kLED on, dimming until off battery voltage too low
LED yellow: communicationLED on telegram transfer via connection line
LED red: fault indicationLED on general faultLED flashing inapplicable address (1–126 decimal)
0903 UTL 101
BestellbezeichnungDesignation
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es
4.34
0973 PTL 201 0973 PTL 202
Adressiertool für Busteilneh-mer der Lumberg-Standard-Serie, Adressierung über M23-Busanschluss der Module
Addressing tool for bus usersof the Lumberg standardseries, addressing via M23 busconnection of the modules
Adressier-Adapter für Busteil-nehmer der Lumberg-Stan-dard-Serie, M23-Anschluss fürdas Modul-SUBD, Anschluss fürdie serielle Schnittstelle
Addressing adaptor for thebus users of the Lumberg stan-dard series, M23 connectionfor the module SUBD, connec-tion for serial interface
PC, Laptop
Stecker 12 polig
male connector 12 poles
RS 232-RS 485
Konverter / converter
Adressier-Adapter
addressing adaptor
Profibus DP-Modul
Profibus DP module
Adressier-Software
addressing software
Kombikabel Profibus DP
(Signale + Spannungsversorgung)
combined cable Profibus DP
(signals + power supply)
4.35
Zubehör 0973 PTL 201• Y-Adapterkabel 0973 PTL 202• Konverter RS232 – RS 485• Software
– Address Changer– Gerätestammdateien (GSD-Files)
Softwareinstallation• Diskette einlegen• unter Dateimanager im Verzeichnis ATDP "Setup" aufrufen• Zielverzeichnis angeben• START INSTALL
Adressieren• Symbol ADDRESS CHANGER anklicken• COM Port wählen (Com 1–4)• Konverter auf serielle Schnittstelle des PC’s stecken• Y-Adapter0973 PTL 202 auf Konverter stecken• Y-Adapter mit Bus-Anschlussstecker verbinden
(hier werden die 24 V DC vom Bus entnommen, die das Gerätzum Adressiervorgang benötigt)
• Das zu adressierende Modul mit Y-Adapter verbindenAchtung: Nur das zu adressierende Gerät darf sich am Busbefinden!
• Neue Moduladresse eingeben• Gerät adressieren
GerätestammdateienIm Verzeichnis GSD sind die Gerätestammdateien undTypendateien der Profibus-DP Module abgelegt.
Accessories 0973 PTL 201• Y adapter cable 0973 PTL 202• Converter RS232 – RS 485• Software
– address changer– master files of unit (GSD files)
Software installation• Insert disk• Load ”Setup” under the file manager in the directory ATDP• Specify destination• START INSTALL
Addressing• Click symbol ADDRESS CHANGER• Choose COM Port (Com 1–4)• Plug converter onto serial interface of the PC• Plug Y adaptor 0973 PTL 202 onto converter• Connect Y adaptor with Bus connector (at this point the
24 V DC needed by the unit for the addressing operation aretapped from the bus)
• Connect the module to be addressed with the Y adapterAttention: Just the unit to be addressed may be connectedwith the bus!
• Enter new module address• Address unit
Master files of unitThe master files of the unit and type files of the Profibus-DPmodules are saved in the directory GSD.
0973 PTL 201
BestellbezeichnungDesignation
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es
0973 PTL 202
4.36
0975 254 101/... M beidseitig / both sides
Profibus-Signalleitungbeidseitig konfektioniert:mit M12-Stecker und M12-Kupplung, 5-polig, B-codierteinseitig konfektioniert: mit M12-Stecker oder M12-Kupplung, 5-polig, B-codiert
Profibus signal cableassembled on both sides:with M12 male connector andM12 female connector, 5 poles,B codingassembled on one side:with M12 male connector orM12 female connector, 5 poles,B coding
Profibus-Signalleitungbeidseitig konfektioniert:mit M12-Stecker oder M12-Kupplung, 5-polig, B-codiertund SUBD-Stecker, 9-polig, mitzuschaltbarem Abschlusswider-stand
Profibus signal cableassembled on both sides:with M12 male connector orM12 female connector, 5 poles,B coding and SUBD male con-nector, 9 poles, with switch-onterminating resistor
0975 254 104/... M beidseitig - Kupplung / both sides - female
0975 254 105/... M beidseitig - Stecker / both sides - male
0975 254 102/... M einseitig - Stecker / one side - male
0975 254 103/... M einseitig - Kupplung / one side - female
Pin 3 n.c.
Pin 4 Line B rot / red
n.c.Pin 1Line APin 2 grün / green
FunktionFunction
FarbeColor
M12-Stecker/-Kupplung, 5-poligM12 male/female connector,5 poles
Pin 5 n.c.
0975 254 102/... M
0975 254 101/... M
0975 254 103/... M
Standardlängen: 0975 254 101/... M: 0,3 M / 0,6 M / 1 M / 2 M / Standard lengths: 0975 254 101/... M: 0.3 M / 0.6 M / 1 M / 2 M /3 M / 5 M / 10 M / 15 M / 20 M / 25 M 3 M / 5 M / 10 M / 15 M / 20 M / 25 M0975 254 102/... M / 0975 254 103/... M: 1 M / 3 M / 5 M / 10 M / 15 M 0975 254 102/... M / 0975 254 103/... M: 1 M / 3 M / 5 M / 10 M / 15 M0975 252 104/... M / 0975 254 105/... M: 1 M / 2 M / 3 M / 5 M 0975 252 104/... M / 0975 254 105/... M: 1 M / 2 M / 3 M / 5 MAndere Kabellängen oder Leitungsaufbauten auf Anfrage. Other cable lengths or cable specifications on request.
BestellbezeichnungDesignation
0975 254 104/... M
0975 254 105/... M
Ein Einsatz der Produkte in aggressiven Medien ist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use.
4.37
0975 202 201/... M beidseitig / both sides
0975 202 202/... M einseitig / one side
Profibus-Kombileitungbeidseitig konfektioniert:mit zwei M23-Steckern, 12-poligeinseitig konfektioniert:mit M23-Stecker, 12-polig
Profibus combined cableassembled on both sides:with two M23 male connectors,12 polesassembled on one side:with M23 male connector, 12 poles
Pin 3 n.c.
Pin 4 Line B rot / redPin 5 n.c.Pin 6 n.c.
n.c.Pin 1Line APin 2 grün / green
Erde / earthPin 9 grün/gelbgreen/yellow
+ 24 VPin 7 schwarz / black
Pin 10 n.c.
Pin 12 n.c.n.c.Pin 11
FunktionFunction
FarbeColor
M23-Stecker, 12-poligM23 male connector, 12 poles
GND (0 V)Pin 8 blau / blue
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es
0975 202 202/... M
0975 202 201/... M
Standardlängen: 0975 202 201/... M: 0,3 M / 0,6 M / 1 M / 2 M / Standard lengths: 0975 202 201/... M: 0.3 M / 0.6 M / 1 M / 2 M /3 M / 5 M / 10 M / 15 M / 20 M / 25 M 3 M / 5 M / 10 M / 15 M / 20 M / 25 M0975 202 202/... M: 1 M / 3 M / 5 M / 10 M / 15 M 0975 202 202/... M: 1 M / 3 M / 5 M / 10 M / 15 MAndere Kabellängen oder Leitungsaufbauten auf Anfrage. Other cable lengths or cable specifications on request.
BestellbezeichnungDesignation
4.38
RKU A 6-203/... M einseitig / one side
Spannungsversorgung, einfach,für Ausgangs-/Mischmodule(0970 PSL 2xx)beidseitig umspritzt:mit M23-Stecker und M23-Kupplung, 6-polig (Pin 1, 2, 3 belegt), 0,6 meinseitig umspritzt:mit M23-Kupplung, 6-polig(Pin 1, 2, 3 belegt)
Power supply single, for out-put/mixing modules (0970 PSL 2xx)molded on both sides:with M23 male connector andM23 female connector, 6 poles(Pin 1, 2, 3 assigned), 0.6 mmolded on one side:with M23 female connector, 6 poles (Pin 1, 2, 3 assigned)
RKU E 6-203/... M einseitig / one side
RSU 6-RKU A 6-203/0,6 M beidseitig / both sides
Spannungsversorgung System/Sensorik einfach, für reine Eingangsmodule (0970 PSL 1xx)einseitig umspritzt:mit M23-Kupplung, 6-polig (Pin 1, 4, 5 belegt)
Power supply system/sensorsingle, for modules with inputsonly (0970 PSL 1xx)molded on one side:with M23 female connector, 6 poles (Pin 1, 4, 5 assigned)
Pin 2 +24 V 1
ErdeearthPin 1 grün/gelb
green/yellow
GND (0 V)Pin 3 2n.c.Pin 4n.c.Pin 5n.c.Pin 6
SignalSignal
AdernLeads
M23-Stecker/-Kupplung, 6-poligM23 male/female connector,6-poles
Pin 4 +24 V 1
ErdeearthPin 1 grün/gelb
green/yellow
GND (0 V)Pin 5 2n.c.Pin 6
n.c.Pin 2n.c.Pin 3
SignalSignal
AdernLeads
M23-Stecker/-Kupplung, 6-poligM23 male/female connector,6 poles
RSU 6-RKU A 6-203/0,6 M
RKU E 6-203/... M
RKU A 6-203/... M
Standardlängen: 5 M / 10 M / 15 M Standard lengths: 5 M / 10 M / 15 MAndere Kabellängen oder Leitungsaufbauten auf Anfrage. Other cable lengths or cable specifications on request.
BestellbezeichnungDesignation
Ein Einsatz der Produkte in aggressiven Medien ist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use.
4.39
RSU 6-RKU 6-204/0,6 M beidseitig / both sides
RKU 6-204/... M einseitig / one side
Spannungsversorgung, zweifachbeidseitig umspritzt:mit M23-Stecker und M23-Kupplung, 6-polig, 0,6 meinseitig umspritzt:mit M23-Kupplung, 6-polig
Power supply doublemolded on both sides:with M23 male connector andM23 female connector, 6 poles,0.6 mmolded on one side:with M23 female connector, 6 poles
Ein Einsatz der Produkte in aggressiven Medienist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es
Pin 2 +24 V 1 1
ErdeearthPin 1 grün/gelb
green/yellow
GND (0 V) 1Pin 3 2+24 V 2Pin 4 3GND (0 V) 2Pin 5 4
1 = Aktorik / Actuator system / 2 = Sensor/System
SignalSignal
AdernLeads
M23-Stecker/-Kupplung, 6-poligM23 male/female connector,6 poles
n.c.Pin 6
RKU 6-204/... M
RSU 6-RKU 6-204/0,6 M
Standardlängen: 5 M / 10 M / 15 M Standard lengths: 5 M / 10 M / 15 MAndere Kabellängen oder Leitungsaufbauten auf Anfrage. Other cable lengths or cable specifications on request.
BestellbezeichnungDesignation
4.40
0979 PTX 101
Profibus-Abschlusswiderstand,M12-Stecker, 4-polig, B-codiert
Profibus terminating resistor,M12 male connector, 4 poles, B coding
Profibus-Abschlusswiderstandfür den 12-poligen M23-Busanschluss
Profibus terminating resistorfor the 12 pole M23 bus con-nection
0979 PTX 201
0979 PTX 2010979 PTX 101
BestellbezeichnungPart no.
Ein Einsatz der Produkte in aggressiven Medien ist im Einzelfall zu überprüfen.
The application of these products in harsh environments should always be checked before use.
4.41
Anschlusshinweis: Profibus M12-ModuleConnecting information: Profibus M12 modules
Spannungsversorgungsleitung,
einseitig umspritzt, für reine
Eingangsmodule, Pin 1, 4, 5
belegt
Power supply cable, molded on
one side, for series with inputs
only, Pin 1, 4, 5 assigned
Best.-Bez./Part-no.
RKU E 6-203/5 M
Spannungsversorgungleitung,
einseitig umspritzt, für
Ausgangs- und Mischodule
Power supply cable, molded on
one side, for output and mixing
modules
Best.-Bez./Part-no.
RKU 6-204/5 M
T-Verteiler zum Weiterschleifen
der Spannungsversorgung
T-connector to drag the power
supply
Best.-Bez./Part-no.
0906 UTP 201
Spannungsversorgung für System/Sensorik und Aktorik, M23-Stecker, 6 poligPower supply for system/sensor and actuator system, M23 male connector, 6 poles
konfektionierbare Kupplung für
Profibus-Signalleitung
field attachable female
connector for Profibus signal
cable
Best.-Bez./Part-no.
0976 PFC 101
konfektionierte Profibus-
Signalleitung
assembled Profibus signal cable
beidseitig
both sides
einseitig, Kupplung
one side, female connector
Best.-Bez./Part-no.
0975 254 101/... M
0975 254 103/... M
Busanschluss Bus-In, M12-Stecker, 5 polig, B-codiertBus connection Bus-In, M12 male connector, 5 poles, B coding
konfektionierbarer Stecker für
Profibus-Signalleitung
field attachable male connector
for Profibus signal cable
Best.-Bez./Part-no.
0976 PMC 101
konfektionierte Profibus-
Signalleitung
assembled Profibus signal cable
beidseitig
both sides
einseitig, Stecker
one side, male connector
Best.-Bez./Part-no.
0975 254 101/... M
0975 254 102/... M
beidseitig, M12-Kupplung –
SUBD-Stecker
both sides, M12 female connector
– SUBD male connector
0975 254 104/... M
beidseitig, M12-Stecker –
SUBD-Stecker
both sides, M12 male connector –
SUBD male connector
0975 254 105/... M
Abschlusswiderstand
Terminating resistor
Best.-Bez./Part-no.
0979 PTX 101
Busanschluss Bus-Out, M12-Kupplung, 5 polig, B-codiertBus connection Bus-Out, M12 female connector, 5 poles, B coding
konfektionierbare Kupplung
field attachable female connector
Lötanschluss / solder connection
Schraubanschluss / screw terminal
Best.-Bez./Part-no.
0906 UFC 201
0906 UFC 202
AS-I
nte
rface
Inte
rbu
sPro
fib
us
CA
No
pen
Devic
eN
et
Eth
ern
et
e2c
67
e2c
20
Dis
trib
uti
on
bo
xes
T-co
nn
ect
ors
Ad
ap
tors
Co
rdse
ts
sin
gle
-en
ded
Co
rdse
ts
do
ub
le-e
nd
ed
Field
att
ach
ab
les
Rece
pta
cles
Acc
ess
ori
es
4.42
Anschlusshinweis: Profibus M23-ModuleConnecting information: Profibus M23 modules
Schutzkappe für nicht belegten Busanschluss
Dust cover for unused bus connection
Best.-Bez./Part-no.
ZVK 2
Spannungsversorgungsleitung,
einseitig umspritzt, für reine
Ausgangs- und Mischmodule,
Pin 1, 2, 3 belegt
Power supply cable, molded on
one side, for series with output
and mixing modules only,
Pin 1,2,3, assigned
Best.-Bez./Part-no.
RKU A 6-203/5 M
T-Verteiler zum Weiterschleifen
der Spannungsversorgung
T-connector to drag the power
supply
Best.-Bez./Part-no.
0906 UTP 201
Spannungsversorgung für Aktorik, M23-Stecker, 6 poligPower supply for actuator system, M23 male connector, 6 poles
konfektionierbarer Stecker für Profibus-Kombileitung (Bus und Versorgung in einer Leitung)
field attachable male connector for Profibus combined cable (Bus and power supply in one cable)
Best.-Bez./Part-no.
0976 PMC 201
T-Verteiler zur getrennten Zuführung von Bus- und Versorgungsleitung bzw. zum Anschluss der Kombilei-
tung für Bus-In und Bus-Out, um bei einem Wechsel des Moduls den Busstrang nicht zu unterbrechen
T-connector for separate feeding of bus and power supply lines respectiveley for connecting the combi-
cable for Bus-In and Bus-Out without interrupting the bus line when changing a module
Best.-Bez./Part-no.
0906 UTP 202
konfektionierbarer Stecker für die getrennte Zuführung von Bus und Versorgung über T-Stück
field attachable male connector for the separate feeding of bus and power supply via a T-connector
Best.-Bez./Part-no.
0976 PMC 202
Abschlusswiderstand
Terminating resistor
Best.-Bez./Part-no.
0979 PTX 201
konfektionierte Profibus-Kombileitung
assembled Profibus combined line
beidseitig
both sides
einseitig, Stecker
one side, male connector
Best.-Bez./Part-no.
0975 202 201/...M
0975 202 202/...M
Busanschluss Bus-In/Bus-Out (Bus + Spannungsversorgung System/Sensor), M23-Kupplung, 12 poligBus connection Bus-In/Bus-Out (Bus + power supply system/sensor), M23 female connector, 12 poles
konfektionierbare Kupplung
field attachable female connector
Lötanschluss / solder connection
Schraubanschluss / screw terminal
Best.-Bez./Part-no.
0906 UFC 201
0906 UFC 202
top related