falcon brochure 9-18-12

Easily, Effectively and Economically dispenses oil based insecticides, fungicides, germicides, disinfectants, odor control and other chemical products.

• ErgonomicTankDesignconformstotheOperator’sbody• GreatestPerformance-to-Weightratioofanymachineavailable• Largeeasy-to-removetankcaps-Easilyaccessible• Standardwith1.5VDC“Buzzer”patentedmicroprocessorignitionsystemwithintegratedswitch

• PatentedDyna-FogStainlessSteelengineandstartingsystemforeasyreliableandconsistentstarting

• Non-PressurizedFuelTanksystemprovidesquickstartingandsuperiorperformance

For its size, no other machine surpasses the Falcon’s™ application capacity or its speed in completing difficult chemical application jobs such as warehouses, factories, food processing plants, greenhouses, parks, cattle barns, swine/poultry houses, grain mills shopping centers, schools, restaurants, hotels and much more.

For ease of use, durability, efficiency, effectiveness and economy, Dyna-Fog Falcon out performs any brand in the world.

www.dynafogasia.com

Model 4000 Thermal Fog Applicator

one year limited warranty© 2009 Curtis Dyna-Fog, Ltd. All rights reserved. Falcon is a trademark of Curtis Dyna-Fog, Ltd. The words Dyna-Fog are a registered trademark of Curtis Dyna-Fog, Ltd. in the United States and/or other countries. To maintain the highest quality products, Curtis Dyna-Fog, Ltd. reserves the right to make technical modifications at any time without prior notice.

Optional Air/Fog Amplifier Increases Fog Width

Westfield, Indiana, USA

SpecificationS

Type: Thermal Aerosol Fog, Resonant Pulse Principle

Formulation Output: 0-42 liters/hr or 0-11 gal/hr

Engine Performance: 22KW or 18,900 kcal/hr. or 30 Hp

Fog Metering Control: Interchangeable Orifice, Metering Valve (Optional)

Fuel Consumption: 1.9 liters/hr or 0.5 GPH

Fuel Tank Pressure Vented, Non-Pressurized

Weight (Empty): 6.7 kg or 14.8 lbs.

Weight (Full): 13.6 kg or 30 lbs.

Fuel tank: 2.2 liter or .58 Gal

Formulation Tank: 6.2 liters or 1.64 Gal

Formulation Tank Material:

High Density Polyethylene

Power Supply: (1) 1.5 Volt “AAA” size Alkaline Battery

Ignition Source: “Buzzer” Type Electronic Coil

Starting Gasoline Method

Patented “Primer Bulb”

Fog Particle size: 0.5 - 50 microns

Length: 132 cm or 52 in

Width: 31.75 cm or 12.5 in

Height: 31.2 cm or 12.3 in

Shipping data:L x W x H: 144.8 x 33.8 x 33.8 (cm) or 57 x 13.3 x 13.3 (in)Weight: 10 kg or 22 lbsVolume: 0.16 cu. M. or 5.9 Cu. Ft

TM

www.dynafogasia.comone year limited warranty© 2012 Curtis Dyna-Fog, Ltd. All rights reserved. Falcon is a trademark of Curtis Dyna-Fog, Ltd. The words Dyna-Fog are a registered trademark of Curtis Dyna-Fog, Ltd. in the United States and/or other countries. To maintain the highest quality products, Curtis Dyna-Fog, Ltd. reserves the right to make technical modifications at any time without prior notice.

CURTIS DYNA-FOG“Innovators of Spraying and Fogging Technology Since 1947”

LtdfaLcon

info@dynafog.com

“duo-flowTM” option (for water based applications)

one year limited warranty

diStributed by:

caLL for your neareSt diStributor

317.896.2561317.896.3788 FAx

INFO@DyNAFOG.COM

© 2012 Curtis Dyna-Fog, Ltd. All rights reserved. Falcon is a trademark of Curtis Dyna-Fog, Ltd. The words Dyna-Fog are a registered trademark of Curtis Dyna-Fog, Ltd. in the United States and/or other countries. To maintain the highest quality products, Curtis Dyna-Fog, Ltd. reserves the right to make technical modifications at any time without prior notice.

Westfield, Indiana, USA

FalconTM“duo-flowTM”ThermalFogApplicator

SmartFogTM“duo-flowTM”ThermalFogApplicatorSpecifyKitpartnumber59086-7

The “Duo-Flow” option enables a Falcon or Smart Fog to be able to efficiently apply both “Oil” base and “Water” base formulations. Water requires more BTU’s of heat to vaporize, therefore, flow rates using water will be less than when using oil. To accomplish the change from Oil to Water and vice-versa, a 3-way valve is mounted on the machine. One port of the valve directs flow for use with “oil” base products and the

safe operation and proper application of product. The “Mist/Fogging Chamber Attachment” helps to propel the thermal mist and fog away from the machine and is used with both “Oil” and “Water” base formulations.

other port of the valve directs flow for use with “water” base products. Plumbing for each formulation type is routed to the same injection point of the engine. Injecting liquid into the same point on the engine ensures

SpecifyKitpartnumber59086-7

Rev. 9-18-12

3-WayValve...easilyselectbetweenoilandwaterbased mode.

Scanimageformoreinformation

OIL(ThermalFOG)

WATER-HO(ThermalMIST)

Orifice FlowRateGPH(LPH)

#24 1.5 (5.7)

#28 2.6 (10.0)

#36 4.6 (17.5)

#60 8.0 (30.0)

#72 11.0 (42.0)

duo-flowToSetFlowRate:1. Rotatevalveto“Oil”or“Water”positiondependingonformulationtype.

2. Installorificetoachievedesiredflowshownintable.

3. TurnfogOn/OffusingtheOn/Offvalve.

Orifice

Orifice

oiL h o2

tM

Orifice FlowRateGPH(LPH)

#31 2.0 (7.6)

#36 2.7 (10.2)

#40 3.7 (14.0)

#45 4.1 (15.5)

2

Duo-FlowLabel

TM