extreme stainless mug (vacuum insulated) - 16 oz. · mug (vacuum insulated) - 16 oz. stainless...
Post on 19-May-2020
2 Views
Preview:
TRANSCRIPT
Product Photos:
Silver
Pink
Black
Blue Violet
Extreme
Stainless
Steel Travel
Mug
(Vacuum
Insulated) -
16 oz. Stainless Steel Travel Mugs
from Contigo®
The Extreme Mug is the
ultimate on-the-go coffee
companion. The
Extreme Stainless Steel
Travel Mug is perfect
for a road warrior's
Monday morning
commute, or the outdoor
enthusiast's latest
adventure. The stylishly
rugged features aren't
just for good looks
though - they combine
into a travel mug that
really can go anywhere,
anytime.
The Extreme Travel
Mug is a double-wall
stainless steel mug with
vacuum insulation,
ensuring that your hot
coffee or other hot or
cold beverages stay that
way for hours.
Benefits:
Patented pull-tab
lid makes this
travel mug 100%
leak-proof.
Vacuum-
insulated
technology means
that this stainless
steel mug keeps
beverages hot for
4 hours, and cold
for 12 hours.
Patented
carabiner clip on
the handle allows
you to take this
travel mug
wherever you go.
Attach it to a bag
strap for hands-
free portability.
Textured grips
make
the Extreme
Mug easy to
carry and hold.
Will hold up to
16 oz. of your
favorite beverage
and fits most
standard car
cupholders.
Constructed with
a double wall and
stainless steel inside and out for
maximum
performance.
Does not contain
rubber or latex.
Made from
100% FDA-
approved
materials.
Volume: 16 oz.
Dimensions: 5" at
widest point, including
handle, x 8.1"H x 2.9"
diameter at base
AUTOSEAL® Aria Stainless Steel Travel Mug
WARNING:
Careful. The beverage you are about to enjoy is very hot. For best results always
use caution.
Always press the AUTOSEAL® button when the tumbler is in the upright position
prior to lifting it to drink. This will release any built-up pressure. Release button to
seal mug.
Keep out of reach of children when filled with hot liquids.
Prior to drinking, check to ensure the lid is properly threaded to body and screwed
down 100%. Button should be depressed to release pressure each time the lid is
screwed on.
If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before
sealing with the lid.
Coffee brewed below boiling temperatures can be poured directly from coffee
makers into the mug without waiting for liquid to cool down.
Avoid accidental depressing of button by sliding the button down to lock, exposing
the red "locked" area above the button.
Do not overfill. Fill liquids to just below the threading in the body.
Do not microwave and do not freeze.
Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh
chemicals.
USAGE RECOMMENDATIONS:
Suitable for hot and cold beverages.
To screw the lid on easily and safely place lid on top of mug. Apply slight
downward pressure and rotate counter-clockwise until you hear a click and lid falls
into place. Proceed to rotate lid clockwise to tighten down.
The AUTOSEAL® lid that came with your new purchase is designed to only fit your
new Contigo® mug. Not for use with other products.
AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
Following your purchase, wash all parts with hot soapy water before use. Rinse
thoroughly and dry. Always store with lid removed to allow parts to dry
completely. Travel mug and lid are top-rack dishwasher safe.
LID CLEANING TIPS:
Always rinse the lid immediately after each use. Store with lid removed to allow
parts to dry completely.
Rinse drink spout and lid vent immediately after use, prior to putting into the
dishwasher:
1. Turn lid so the underside is facing up and fill lid with hot soapy
water.
2. Tilt the lid back and forth first towards the drink spout and then
towards the button while pressing the button to allow the soapy water to rinse
through both the drink spout and the vent hole.
3. Repeat 1 and 2 a few times for best results.
Additional Cleaning Tips:
To clean the top of the lid:
1. Use a non-abrasive sponge or brush head/swab to clean the drink
spout in the open and closed position.
2. Rinse while pressing the button to allow the soapy water to rinse
through the drink spout.
Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy
water.
If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a
cotton swab can be used to clean the inside of the
AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with
hot soapy water. Run brush head or swab along the
following areas to ensure complete cleaning:
1. Underneath and along both sides of the center plastic piece of the
lid. Reference "A" and "C" below.
2. Along both the inner and outer walls of the threading. Reference "B"
below.
3. The underside of the spout. Reference "D" below.
Rinse repeatedly while pressing the button to allow the soapy water to rinse
through the drink spout.
Click to view General Care & Use Instructions (all products)
AUTOSEAL® Bella Double Wall Insulated Mug
WARNING:
Careful. The beverage you are about to enjoy is very hot. For best results always use
caution.
Always press the AUTOSEAL® button when the tumbler is in the upright position prior
to lifting it to drink. This will release any built-up pressure. Release button to seal
mug.
Keep out of reach of children when filled with hot liquids.
Prior to drinking, check to ensure the lid is properly threaded to body and screwed
down 100%. Button should be depressed to release pressure each time the lid is
screwed on.
If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before
sealing with the lid.
Coffee brewed below boiling temperatures can be poured directly from coffee makers
into the mug without waiting for liquid to cool down.
Avoid accidental depressing of button by keeping button free and clear of other objects.
Do not overfill. Fill liquids to just below the threading in the body.
Do not microwave and do not freeze.
Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh
chemicals.
USAGE RECOMMENDATIONS:
Suitable for hot and cold beverages.
To screw the lid on easily and safely place lid on top of mug. Apply slight downward
pressure and rotate counter-clockwise until you hear a click and lid falls into
place. Proceed to rotate lid clockwise to tighten down.
The AUTOSEAL® lid that came with your new purchase is designed to only fit your
new Contigo® mug. Not for use with other products.
AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
Following your purchase, wash all parts with hot soapy water before use. Rinse
thoroughly and dry. Always store with lid removed to allow parts to dry completely.
Travel mug and lid are top-rack dishwasher safe.
LID CLEANING TIPS:
Always rinse the lid immediately after each use. Store with lid removed to allow
parts to dry completely.
Rinse drink spout and lid vent immediately after use, prior to putting into the
dishwasher:
1. Turn lid so the underside is facing up and fill lid with hot soapy water.
2. Tilt the lid back and forth first towards the drink spout and then towards
the button while pressing the button to allow the soapy water to rinse
through both the drink spout and the vent hole.
3. Repeat 1 and 2 a few times for best results.
Additional Cleaning Tips:
To clean the top of the lid:
1. Use a non-abrasive sponge or brush head/swab to clean the drink spout
in the open and closed position.
2. Rinse while pressing the button to allow the soapy water to rinse
through the drink spout.
Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy
water.
If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a
cotton swab can be used to clean the inside of the
AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with
hot soapy water. Run brush head or swab along the
following areas to ensure complete cleaning:
1. Underneath and along both sides of the center plastic piece of the
lid. Reference "A" and "C" below.
2. Along both the inner and outer walls of the threading. Reference "B"
below.
3. The underside of the spout. Reference "D" below.
Rinse repeatedly while pressing the button to allow the soapy water to rinse through
the drink spout.
Click to view General Care & Use Instructions (all products)
AUTOSEAL® Elite Stainless Steel Travel Mug (sold only at QVC)
WARNING:
Careful. The beverage you are about to enjoy is very hot. For best results always use
caution.
Always press the AUTOSEAL® button when the tumbler is in the upright position prior
to lifting it to drink. This will release any built-up pressure. Release button to seal
mug.
Keep out of reach of children when filled with hot liquids.
Prior to drinking, check to ensure the lid is properly threaded to body and screwed
down 100%. Button should be depressed to release pressure each time the lid is
screwed on.
If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before
sealing with the lid.
Coffee brewed below boiling temperatures can be poured directly from coffee makers
into the mug without waiting for liquid to cool down.
Avoid accidental depressing of button by keeping button free and clear of other objects.
Do not overfill. Fill liquids to just below the threading in the body.
Do not microwave and do not freeze.
Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh
chemicals.
USAGE RECOMMENDATIONS:
Suitable for hot and cold beverages.
To screw the lid on easily and safely place lid on top of mug. Apply slight downward
pressure and rotate counter-clockwise until you hear a click and lid falls into
place. Proceed to rotate lid clockwise to tighten down.
The AUTOSEAL® lid that came with your new purchase is designed to only fit your
new Contigo® mug. Not for use with other products.
AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
Following your purchase, wash all parts with hot soapy water before use. Rinse
thoroughly and dry. Always store with lid removed to allow parts to dry completely.
Lid is top-rack dishwasher safe.
Hand wash mug body.
LID CLEANING TIPS:
Always rinse the lid immediately after each use. Store with lid removed to allow
parts to dry completely.
Rinse drink spout and lid vent immediately after use, prior to putting into the
dishwasher:
1. Turn lid so the underside is facing up and fill lid with hot soapy water.
2. Tilt the lid back and forth first towards the drink spout and then towards
the button while pressing the button to allow the soapy water to rinse
through both the drink spout and the vent hole.
3. Repeat 1 and 2 a few times for best results.
Additional Cleaning Tips:
To clean the top of the lid:
1. Use a non-abrasive sponge or brush head/swab to clean the drink spout
in the open and closed position.
2. Rinse while pressing the button to allow the soapy water to rinse
through the drink spout.
Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy
water.
If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a
cotton swab can be used to clean the inside of the
AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with
hot soapy water. Run brush head or swab along the
following areas to ensure complete cleaning:
1. Underneath and along both sides of the center plastic piece of the
lid. Reference "A" and "C" below.
2. Along both the inner and outer walls of the threading. Reference "B"
below.
3. The underside of the spout. Reference "D" below.
Rinse repeatedly while pressing the button to allow the soapy water to rinse through
the drink spout.
Click to view General Care & Use Instructions (all products)
AUTOSEAL® Elle Double Wall Insulated Mug
WARNING:
Careful. The beverage you are about to enjoy is very hot. For best results always use
caution.
Always press the AUTOSEAL® button when the tumbler is in the upright position prior
to lifting it to drink. This will release any built-up pressure. Release button to seal
mug.
Keep out of reach of children when filled with hot liquids.
Prior to drinking, check to ensure the lid is properly threaded to body and screwed
down 100%. Button should be depressed to release pressure each time the lid is
screwed on.
If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before
sealing with the lid.
Coffee brewed below boiling temperatures can be poured directly from coffee makers
into the mug without waiting for liquid to cool down.
Avoid accidental depressing of button by keeping button free and clear of other objects.
Do not overfill. Fill liquids to just below the threading in the body.
Do not microwave and do not freeze.
Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh
chemicals.
USAGE RECOMMENDATIONS:
Suitable for hot and cold beverages.
To screw the lid on easily and safely place lid on top of mug. Apply slight downward
pressure and rotate counter-clockwise until you hear a click and lid falls into
place. Proceed to rotate lid clockwise to tighten down.
The AUTOSEAL® lid that came with your new purchase is designed to only fit your
new Contigo® mug. Not for use with other products.
AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
Following your purchase, wash all parts with hot soapy water before use. Rinse
thoroughly and dry. Always store with lid removed to allow parts to dry completely.
Lid is top-rack dishwasher safe.
Hand wash travel mug body.
LID CLEANING TIPS:
Always rinse the lid immediately after each use. Store with lid removed to allow
parts to dry completely.
Rinse drink spout and lid vent immediately after use, prior to putting into the
dishwasher:
1. Turn lid so the underside is facing up and fill lid with hot soapy water.
2. Tilt the lid back and forth first towards the drink spout and then towards
the button while pressing the button to allow the soapy water to rinse
through both the drink spout and the vent hole.
3. Repeat 1 and 2 a few times for best results.
Additional Cleaning Tips:
To clean the top of the lid:
1. Use a non-abrasive sponge or brush head/swab to clean the drink spout
in the open and closed position.
2. Rinse while pressing the button to allow the soapy water to rinse
through the drink spout.
Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy
water.
If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a
cotton swab can be used to clean the inside of the
AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with
hot soapy water. Run brush head or swab along the
following areas to ensure complete cleaning:
1. Underneath and along both sides of the center plastic piece of the
lid. Reference "A" and "C" below.
2. Along both the inner and outer walls of the threading. Reference "B"
below.
3. The underside of the spout. Reference "D" below.
Rinse repeatedly while pressing the button to allow the soapy water to rinse through
the drink spout.
Click to view General Care & Use Instructions (all products)
AUTOSEAL® Sport Stainless Steel Travel Mug
WARNING:
Careful. The beverage you are about to enjoy is very hot. For best results always use
caution.
Always press the AUTOSEAL® button when the tumbler is in the upright position prior
to lifting it to drink. This will release any built-up pressure. Release button to seal
mug.
Keep out of reach of children when filled with hot liquids.
Prior to drinking, check to ensure the lid is properly threaded to body and screwed
down 100%. Button should be depressed to release pressure each time the lid is
screwed on.
If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before
sealing with the lid.
Coffee brewed below boiling temperatures can be poured directly from coffee makers
into the mug without waiting for liquid to cool down.
Avoid accidental depressing of button by keeping button free and clear of other objects.
Do not overfill. Fill liquids to just below the threading in the body.
Do not microwave and do not freeze.
Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh
chemicals.
USAGE RECOMMENDATIONS:
Suitable for hot and cold beverages.
To screw the lid on easily and safely place lid on top of mug. Apply slight downward
pressure and rotate counter-clockwise until you hear a click and lid falls into
place. Proceed to rotate lid clockwise to tighten down.
The AUTOSEAL® lid that came with your new purchase is designed to only fit your
new Contigo® mug. Not for use with other products.
AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
Following your purchase, wash all parts with hot soapy water before use. Rinse
thoroughly and dry. Always store with lid removed to allow parts to dry completely.
Travel mug and lid are top-rack dishwasher safe.
LID CLEANING TIPS:
Always rinse the lid immediately after each use. Store with lid removed to allow
parts to dry completely.
Rinse drink spout and lid vent immediately after use, prior to putting into the
dishwasher:
1. Turn lid so the underside is facing up and fill lid with hot soapy water.
2. Tilt the lid back and forth first towards the drink spout and then towards
the button while pressing the button to allow the soapy water to rinse
through both the drink spout and the vent hole.
3. Repeat 1 and 2 a few times for best results.
Additional Cleaning Tips:
To clean the top of the lid:
1. Use a non-abrasive sponge or brush head/swab to clean the drink spout
in the open and closed position.
2. Rinse while pressing the button to allow the soapy water to rinse
through the drink spout.
Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy
water.
If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a
cotton swab can be used to clean the inside of the
AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with
hot soapy water. Run brush head or swab along the
following areas to ensure complete cleaning:
1. Underneath and along both sides of the center plastic piece of the
lid. Reference "A" and "C" below.
2. Along both the inner and outer walls of the threading. Reference "B"
below.
3. The underside of the spout. Reference "D" below.
Rinse repeatedly while pressing the button to allow the soapy water to rinse through
the drink spout.
Click to view General Care & Use Instructions (all products)
AUTOSEAL® West Loop Stainless Steel Travel Mug - 16 oz.
WARNING:
Careful. The beverage you are about to enjoy is very hot. For best results always use
caution.
Always press the AUTOSEAL® button when the tumbler is in the upright position prior
to lifting it to drink. This will release any built-up pressure. Release button to seal
mug.
Keep out of reach of children when filled with hot liquids.
Prior to drinking, check to ensure the lid is properly threaded to body and screwed
down 100%. Button should be depressed to release pressure each time the lid is
screwed on.
If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before
sealing with the lid.
Coffee brewed below boiling temperatures can be poured directly from coffee makers
into the mug without waiting for liquid to cool down.
Avoid accidental depressing of button by keeping button free and clear of other objects.
Do not overfill. Fill liquids to just below the threading in the body.
Do not microwave and do not freeze.
Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh
chemicals.
USAGE RECOMMENDATIONS:
Suitable for hot and cold beverages.
To screw the lid on easily and safely place lid on top of mug. Apply slight downward
pressure and rotate counter-clockwise until you hear a click and lid falls into
place. Proceed to rotate lid clockwise to tighten down.
The AUTOSEAL® lid that came with your new purchase is designed to only fit your
new Contigo® mug. Not for use with other products.
AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
Following your purchase, wash all parts with hot soapy water before use. Rinse
thoroughly and dry. Always store with lid removed to allow parts to dry completely.
All lids are top-rack dishwasher safe.
If you have purchased a mug that has a brushed stainless steel body (not
colored/painted body), the body is top-rack dishwasher safe.
If you have purchased a mug that has a COLORED/PAINTED body, it is
recommended that the body be hand washed.
LID CLEANING TIPS:
Always rinse the lid immediately after each use. Store with lid removed to allow
parts to dry completely.
Rinse drink spout and lid vent immediately after use, prior to putting into the
dishwasher:
1. Turn lid so the underside is facing up and fill lid with hot soapy water.
2. Tilt the lid back and forth first towards the drink spout and then towards
the button while pressing the button to allow the soapy water to rinse
through both the drink spout and the vent hole.
3. Repeat 1 and 2 a few times for best results.
Additional Cleaning Tips:
To clean the top of the lid:
1. Use a non-abrasive sponge or brush head/swab to clean the drink spout
in the open and closed position.
2. Rinse while pressing the button to allow the soapy water to rinse
through the drink spout.
Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy
water.
If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a
cotton swab can be used to clean the inside of the
AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with
hot soapy water. Run brush head or swab along the
following areas to ensure complete cleaning:
1. Underneath and along both sides of the center plastic piece of the
lid. Reference "A" and "C" below.
2. Along both the inner and outer walls of the threading. Reference "B"
below.
3. The underside of the spout. Reference "D" below.
Rinse repeatedly while pressing the button to allow the soapy water to rinse through
the drink spout.
Click to view General Care & Use Instructions (all products)
AUTOSEAL® West Loop Stainless Steel Travel Mug - 20 oz.
WARNING:
Careful. The beverage you are about to enjoy is very hot. For best results always use
caution.
Always press the AUTOSEAL® button when the tumbler is in the upright position prior
to lifting it to drink. This will release any built-up pressure. Release button to seal
mug.
Keep out of reach of children when filled with hot liquids.
Prior to drinking, check to ensure the lid is properly threaded to body and screwed
down 100%. Button should be depressed to release pressure each time the lid is
screwed on.
If filling with boiling liquids, allow liquid to cool down for at least 3 minutes before
sealing with the lid.
Coffee brewed below boiling temperatures can be poured directly from coffee makers
into the mug without waiting for liquid to cool down.
Avoid accidental depressing of button by keeping button free and clear of other objects.
Do not overfill. Fill liquids to just below the threading in the body.
Do not microwave and do not freeze.
Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh
chemicals.
USAGE RECOMMENDATIONS:
Suitable for hot and cold beverages.
To screw the lid on easily and safely place lid on top of mug. Apply slight downward
pressure and rotate counter-clockwise until you hear a click and lid falls into
place. Proceed to rotate lid clockwise to tighten down.
The AUTOSEAL® lid that came with your new purchase is designed to only fit your
new Contigo® mug. Not for use with other products.
AUTOSEAL® lid is designed to help prevent spills from accidental tipping.
Following your purchase, wash all parts with hot soapy water before use. Rinse
thoroughly and dry. Always store with lid removed to allow parts to dry completely.
Lid is top-rack dishwasher safe.
Hand wash mug body.
LID CLEANING TIPS:
Always rinse the lid immediately after each use. Store with lid removed to allow
parts to dry completely.
Rinse drink spout and lid vent immediately after use, prior to putting into the
dishwasher:
1. Turn lid so the underside is facing up and fill lid with hot soapy water.
2. Tilt the lid back and forth first towards the drink spout and then towards
the button while pressing the button to allow the soapy water to rinse
through both the drink spout and the vent hole.
3. Repeat 1 and 2 a few times for best results.
Additional Cleaning Tips:
To clean the top of the lid:
1. Use a non-abrasive sponge or brush head/swab to clean the drink spout
in the open and closed position.
2. Rinse while pressing the button to allow the soapy water to rinse
through the drink spout.
Clean the underside of the lid with a non-abrasive sponge or swish in hot, soapy
water.
If desired, a small, pipe-cleaner-style brush, small arts and crafts paint brush, or a
cotton swab can be used to clean the inside of the
AUTOSEAL® mechanism. Turn lid so the underside is facing up and fill lid with
hot soapy water. Run brush head or swab along the
following areas to ensure complete cleaning:
1. Underneath and along both sides of the center plastic piece of the
lid. Reference "A" and "C" below.
2. Along both the inner and outer walls of the threading. Reference "B"
below.
3. The underside of the spout. Reference "D" below.
Rinse repeatedly while pressing the button to allow the soapy water to rinse through
the drink spout.
Click to view General Care & Use Instructions (all products)
Extreme Stainless Steel Travel Mug
Careful. The beverage you are about to enjoy is very hot. For best results always use
caution.
The sealing lid is only designed to fit your Contigo® mug. Not for use with other
products.
Sealing lid is designed to help prevent spills from accidental tipping.
Product can be used for both hot and cold liquids.
Hand wash all parts with hot soapy water before use. Clean with lid in the open
position. Rinse thoroughly and dry. Always store with lid removed.
The lid closure tab should be in the open position when securing lid onto mug or when
removing lid. Prior to drinking check to ensure the lid is secured tightly.
Lid can be positioned for right- or left-handed drinkers.
Lid is top-rack dishwasher safe. Body of the mug is hand wash only.
Not recommended for carbonated beverages.
CAUTION:
Do not use cleaners containing bleach, chlorine, abrasives, and/or other harsh
chemicals.
Do not microwave and do not freeze.
Do not overfill. Fill liquids to just below the lid threading. Hot liquids can burn user.
Do not fill with boiling liquids. Liquid temperatures should be 90 degrees C or less to
avoid burning.
Keep out of reach of children when filled with hot liquids.
top related