etanplast® - high-rate waterproofing
Post on 15-May-2015
324 Views
Preview:
DESCRIPTION
TRANSCRIPT
MECHANISED WATERPROOFINg
ETANPLAST®
High-rate waterproofing
kEYBENEFITS
The structure can be adapted to all types of traffic
The process can be used in new construction and maintenance
The process can be rapidly applied, which saves time
Saving across the board
kEYFIguRES
Most waterproofing systems for engineering structure decks require a substantial amount of
time-consuming manual application, which lengthens the process and makes it dependent on the
weather.
Eurovia has revolutionised waterproofing by developing a reliable and very effective
waterproofing process that is fully mechanised: Etanplast®.
ETANPLAST®
HIgH-RATE WATERPROOFINg
Up to 5,000m2
per day
A 30-year track record
Dozensof major project references
Etanplast® is a multi-layer waterproofing / surface course for concrete engineering structure decks. The exclusive process is original in two ways: it uses very high-performance polymer-modified bituminous products and it can be mechanically laid using equipment specific to the roadworks industry.
The benefits of Etanplast® are reflected in its
components, multi-layer structure and mechanised
laying process.
LASTINg EFFECTIVENESS
The use of modified binders for all layers ensures durable high performance.
The mechanised laying process ensures that the work is uniform.
SAVINg
The elimination of manual operations ensures rapid laying (up to 5,000m2 per day, depending on the structure to be waterproofed) and rapid re-trafficking.
The waterproofing and surface courses are laid by a single contractor, which saves considerable amounts of time and substantially simplifies the organisation of works.
These benefits, together with ongoing quality
control set out in the specific procedures applied
before and during Etanplast® application, ensure
faultless waterproofing.
INNOVATION IS OuR TRADE
SAVINg ACROSSTHE BOARD
uNIVERSALLY PROVEN EFFICIENCY
Since it was first used in 1987, Etanplast® has been applied to high-profile, high-traffic structures in France and abroad, including the Ile de Ré viaduct, the Channel Tunnel terminal, the Normandy bridge access viaducts, a wide range of viaducts along the A26, A39, A51, A71 and A75 motorways in France, the Confederation Bridge and the Ile aux Tourtes Bridge in Quebec and Turtle Creek Dam in the United States.
Etanplast® is a benchmark process that can be applied to all types of reinforced, pre-stressed, girder and arch segment engineering structures with concrete decks: bridges, viaducts, cut and cover tunnels, car parks, etc.
Etanplast® can even be used on combined structures – concrete decks over metal structures – provided a membrane is first laid (at about 1.5kg/m2) over the primed substrate to avoid the effects of any cracks in the deck. The size of the structure to be waterproofed must of course be compatible with the use of high-speed laying machinery.
Following mechanical and/or high-pressure water cleaning of the deck, the various components of the Etanplast® complex are applied mechanically:
> Cold primer or special emulsion free of chlorine ions
> Microplast® fine-graded sand asphalt with Polybitume® highly modified bitumen. Applied in a nominal thickness of 25mm, it provides a uniform deck surface and the ideal substrate for the waterproofing layer. It is highly compact, thus contributing to the waterproofing system. The choice of binder ensures excellent rutting, fatigue and crack resistance.
> Thick 2.5kg/m2 Polybitume® highly modified bitumen membrane which ensures the essential waterproofing function of the complex.
> Protective layer of 2.5 to 3kg/m2 of agglomerated slate chips to ensure that the membrane can be trafficked while the surface course is being laid and to prevent the membrane binder from migrating into the upper asphalt mix.
> Surface course of at least 40mm thickness of 0/10mm or 0/14mm asphaltic concrete with modified binder.
The Etanplast® process is patented.A French Technical Opinion was issued for it in December 1996.It has been approved by the French Railways for use on road and rail bridges.Etanplast® was also approved by the British Board of Agrément (BBA) in 1995 and certified by the Quebec Ministry of Transport in 2004.
Etanplast® is a registered trademark.
VERSATILE AND CONSISTENTLY EFFECTIVE
CONTROLLED APPLICATION ACROSS THE BOARD
THE FIRST HIgH RATE SOLuTION
Etanplast® is the first waterproofing process to be laid by high-speed equipment, the “MHC Complex” defined in Update No. 2 of the STER 81 pilot file published by Sétra in July 1990.
TECHNICAL DEPARTMENT
18, place de l’Europe - 92565 Rueil-Malmaison cedex
Tel. : 33 (0)1 47 16 38 00 - Fax : 33 (0)1 47 16 38 01
www.eurovia.com
technique@eurovia.com
- Au
gust
20
13 -
pho
tos
cred
it : p
hoto
libra
ry E
urov
ia
top related