engineering materials emt 110 semester 1 2012/2013 by: puan nurul ain harmiza abdullah
Post on 27-Dec-2015
223 Views
Preview:
TRANSCRIPT
Engineering MaterialsEMT 110Semester 1 2012/2013
BY: PUAN NURUL AIN HARMIZA ABDULLAH
Pn. Nurul Ain Harmiza Abdullah GROUP A
En. Zulkarnain Mohd Idris GROUP B
Lecturers
Timetable
Smith, W.F. and Hashemi, J. (2011).
Foundations of Materials Science and Engineering
5th Edition, Mc Grawhill.
RM 85
Text book:
The course is tailored to give students a broad introduction to material properties and limitations. The subject will cover fundamental material structure, class of material properties, measurement of the properties, and knowledge to make material selection with better properties. The common micro-structural features of different material classes will be outlined in order to relate material with its characteristics.
Course synopsis
At the end of the course, students are expected to be:
CO1: Ability to compare types of material families (metal, polymer,
ceramic, and composite) and describe material structure. CO2:
Ability to analyze, calculate, and compare various material characteristic and properties such as mechanical, electrical, magnetic, and optical properties.
CO3: Ability to analyze material reliability in terms of material life
cycle, oxidation and corrosion mechanism.
Learning Outcomes
Credit hours : 3 Contact hours: 3 hours (L) and 1 hours (T)per
week Lecture : 42 hours per semester Tutorial : 14 hours per semester
Peperiksaan / Examination : 70 % Mid Term Examination 1 = 10 % Mid Term Examination 2 = 10 % Final Examination = 50 %
Penilaian berterusan / Continual assessment : 30 % Activities (reports & in class) = 5 % Quizzes = 5 % Assignments = 20 %
Evaluation contribution
At least 3 Quizzes (5%) Activities / Viva (5%) Assignments (20%) Midterm Test 1: Week 7 (10%) Midterm Test 2: Week 15 (10%) Final Exam (50%)
Evaluation
Assignment 1 (5%): Proposal of Student Centered Learning (SCL)
project
Assignment 2 (5%)
Assignment 3 (10%): Final Report for SCL project
Assignments
WEEK
CHAPTER
TITLE CO
ASSIGNMENT
QUIZ
ACTIVITY
EXAM
1 1 Introduction to material properties
1
2 2 Atom and bonding 1
3 3 Material structure and atomic packing
1
4 A1
5 4 Solidification and crystal imperfection
1 Q1
6 6 Mechanical properties of material
2
7 7 A2 Test 1
SEMESTER BREAK
WEEK
CHAPTER
TITLE CO
ASSIGNMENT
QUIZ
ACTIVITY
EXAM
9 5 Diffusion and phase diagram
2
10 8
11 14 Electrical, magnetic, and optical properties
2 A3
12 15
13 16 Q2
14 13 Material oxidation, corrosion
3
15 Q3 Viva Test 2
FINAL EXAM
All notes will be uploaded to: http://www.portal.unimap.edu.my/
Go to: Log inLecture noteSchool of Bioprocess
EngineeringSemester 1 Sidang Akademik 2012/2013 BIOTECHNOLOGY ENGINEERING TECHNOLOGYFIRST YEAREMT110
Notes
Attendance should not less than 80%, or else you will be barred from taking final examination.
Plagiarism and copying other students’ work is strictly prohibited especially in doing assignments and lab reports, or else both parties will get zero.
Cheating in quizzes and examination is also prohibited, or else both parties will get zero.
Therefore, study hard and smart. Take note of the important chapters or things that will be highlighted throughout lectures.
Important Informations
Reading schedule is based on the syllabus. Read the learning topic before joining in the
class.
For example: Next week (2nd)
Reading assignment: Atomic Structures Pop-up quiz on the reading assignment
READING SCHEDULE
top related