electrical and computer engineering irregular object dimensioning system advisor: professor neal...
Post on 22-Dec-2015
216 Views
Preview:
TRANSCRIPT
Electrical and Computer Engineering
Irregular Object Dimensioning System
Advisor: Professor Neal Anderson
Michael BaccariPeter Bian
Michael CoughlinAvi Noy
2Electrical and Computer Engineering
Agenda
Statement of Problem
Requirement Specification
System Block Diagram
Proposed MDR Specification
Summary
3Electrical and Computer Engineering
Statement of Problem
Background• Sorting facilities’ conveyer belts.
• Components of sort system: Photo eye, laser measuring heads, set of 6 line-scan cameras.
4Electrical and Computer Engineering
Statement of Problem (Cont’d)
Background (Cont’d)
• Current issues with the dimensioning component.• “The irregular approval.”
5Electrical and Computer Engineering
Requirement Specification
Design• SDP team proposal• Motivation• Approach
Deliverables• A working prototype of the improved dimensioning system.
Included with prototype: Parts list System Schematic Schematic of control box Bill of materials Program code of the user program
• The user program.
6Electrical and Computer Engineering
Requirement Specification (Cont’d)
Principle of Operation• Actual implementation will automate following process:
Object is placed on conveyer belt. User starts conveyer belt.
• Cameras take pictures of object, data feeds into control box.
• LMS 200 lasers scan the object, data feeds into control box.
• Control box contains microcontroller chip with dimensioning algorithms.
• Calculated dimensions are sent to computer via USB or network port.
• Dimensions are displayed on user program.
7Electrical and Computer Engineering
Requirement Specification (Cont’d)
Design alternatives• Line scan cameras
Pros:High resolution
Cons:Taking picture of object is slow as it has to process
each line of image separately.
• 2-D camerasPros:
High speed.Cons:
Lower resolution.
8Electrical and Computer Engineering
Requirement Specification (Cont’d)
User Interface• The user program contains a start button which will start the
process of dimensioning the object.
Input• The irregular object dimensioned by the system.• User places the object on conveyer belt for scanning.
Output• The dimensions for the optimum size box for the irregularly
shaped object. • Dimensioning results will be displayed in a user program
which will stream the information.
9Electrical and Computer Engineering
Requirement Specification (Cont’d)
Acceptability Tests
• The standard irregular approval test is met.
• The time needed to calculate the dimensions must be faster than the time it takes for the object to move from the dimensioning system to the side cameras.
• The system must be able to handle dimensioning of multiple objects at a constant rate for a period of time to be determined without crashing or timeouts.
10Electrical and Computer Engineering
Requirement Specification (Cont’d)
“The Irregular Approval”
11Electrical and Computer Engineering
Requirement Specification (Cont’d)
Product Cost• Subsystem of a larger tunnel system.
• Components provided by Sick Inc.: Two (master and slave) LMS 200 laser measuring heads. All required wires for connecting to control box. Two sets of parabolic LED light sources.
• Any modifications we make to the dimensioning system will be accounted for in the cost of the total tunnel system. For example:
Newly proposed cameras. Modified control box.
• The control box, conveyer belt and possibly the cameras will be built using the allotted budget.
12Electrical and Computer Engineering
System Block Diagram
13Electrical and Computer Engineering
Proposed MDR Specification
Current hardware given from Sick Inc. operating.
Complete research on:• Multiplexing of lasers and newly added cameras.• Mathematical algorithms.• Microcontroller chips.
Schematic for control box.
Working conveyer belt.
14Electrical and Computer Engineering
Summary
Design• Multiplex the laser system and cameras.• Mathematical algorithms for dimensioning.• Integrated control box.
Motivation• Increase the accuracy for dimensioning irregular objects.• Obtain “irregular approval.”
15Electrical and Computer Engineering
Comments / Questions?
top related