e p la c emen t bladders - fuel safe
Post on 21-Feb-2022
2 Views
Preview:
TRANSCRIPT
21 800-433-6524 Email: sales@fuelsafe.com www.fuelsafe.com 21
rePlaCemenT bladders
Part No. Capacity To FitRB105 5 gal PC105
RB108A 8 gal PC108A
RB108B 8 gal PC108B
RB110 10 gal PC110
RB112 12 gal PC112
RB115 15 gal PC115
RB117 17 gal PC117
RB118A 18 gal PC118A
RB118B 18 gal PC118B
RB122A 22 gal PC122A
RB122B 22 gal PC122B or C
RB122C 22 gal PC122C
RB122E 22 gal *PC122E
RB124 24 gal PC124
RB126 26 gal PC126
RB129 29 gal PC129
RB132A 32 gal PC132A
RB132B 32 gal PC132B
RB144 44 gal PC144
Capacities are approximate. Verify can size before ordering.
Part No. Capacity To FitRB205 5 gal SM105
RB208A 8 gal SM108A
RB208B 8 gal SM108B
RB210 10 gal SM110
RB212 12 gal SM112
RB215 15 gal SM115
RB217 17 gal SM117
RB218A 18 gal SM118A
RB218B 18 gal SM118B or C
RB222A 22 gal SM122A
RB222B 22 gal SM122
RB222C 22 gal SM122C
RB222E 22 gal *SM122E
RB224 22 gal SM124
RB226 26 gal SM126
RB229 29 gal SM129
RB232A 32 gal SM132A
RB232B 32 gal SM132B
RB244 44 gal SM144
Capacities are approximate. Verify can size before ordering.
Part No. Capacity To FitRB305 5 gal ED105
RB308 8 gal ED108
RB312 12 gal ED112
RB315 15 gal ED115
RB322A 22 gal ED122A
RB322B 22 gal ED122B
RB325 25 gal ED125
RB332A 32 gal ED132A
RB332B 32 gal ED132B
Capacities are approximate. Verify can size before ordering. Only stock sizes available with Enduro bladders.
Part No. RB122E
Oval Series Replacement Bldrs
Part No. FitsRB124 PC124
RB122E PC122E1
RB122E PC122E2
RB024 XC124
RB022E-1 XC122E-1
RB022E-2 XC122E-2
RB022E-3 XC122E-3
RB022E-4 XC122E-4
Off Road Buggy and Truck Replacement Bladders
Part No. Fits Buggy Part No. Part No. FitsTruck Part No.RBOR120BP OR120BP (Pro Cell™) RBOR125TP OR125TP (Pro Cell®)
RBOR125BP OR125BP (Pro Cell®) RBOR135TP OR135TP (Pro Cell®)
RBOR125BE OR125BE (Enduro) RBOR140TP OR140TP (Pro Cell®)
RBOR135BP OR135BP (Pro Cell®) RBOR150TP OR150TP (Pro Cell®)
RBOR140BP OR140BP (Pro Cell®) RBOR160TP OR160TP (Pro Cell®)
RBOR170TP OR170TP (Pro Cell®)
Pro Cell BladdersFIA-FT3 certified, suitable for all hydrocarbon fuels and alcohol blends. Flexible bladder design can be collapsed for installation. Extremely durable. Comes with nut-ring, foam, gasket, blank steel plate and pickup (-8 plumbed right rear).
Sportsman BladdersFIA-FT3 certified, suitable for all hydrocarbon fuels (gasoline, diesel, avgas.) Flexible bladder design can be collapsed for installation. Lightest weight. Comes with nut-ring, foam, gasket, blank steel plate and pickup (-8 plumbed right rear).
Enduro BladdersFIA-FT3 certified. Compatible with all types of fuel (baffling foam must be removed for use with alcohol fuels). Not collapsible. Very durable and cost effective. Comes with nut-ring, foam, gasket, blank steel plate and pickup (-8 plumbed right rear).
Off Road Replacement Bladders
Oval Series Replacement Bladders
REPLACEMENT BLADDERS
22 800-433-6524 Email: sales@fuelsafe.com www.fuelsafe.com
rePlaCemenT Cans / Foam
Top External Flange (EF)Steel Container Shoebox Lid (SB)Bottom Flange (BF) Replacement Foam
Top or Bottom Flange/Shoebox
Part No. Cpty. FitsAC105 5 gal PC/SM/ED/RS/EED
AC108A 8 gal PC/SM/ED/RS/EED
AC108B 8 gal PC/SM
AC110 10 gal PC/SM
AC112 12 gal PC/SM/ED/RS/EED
AC 115 15 gal PC/SM/ED/RS/EED
AC117 17 gal PC/SM
AC118A 18 gal PC/SM
AC118B 18 gal PC/SM
AC122A 22 gal PC/SM/ED/RS/EED
AC122B 22 gal PC/SM/ED/RS/EED
AC122C 22 gal PC/SM
AC126 26 gal PC/SM/ED/RS/EED
AC129 29 gal PC/SM
AC132A 32 gal PC/SM/ED/RS/EED
AC132B 32 gal PC/SM/ED/RS/EED
AC144 44 gal PC/SM
Add EF for external flange, SB forshoebox lid or BF for bottom flange.
Steel Cpty. FitsSC105 5 gal PC/SM/ED/RS/EED
SC108A 8 gal PC/SM/ED/RS/EED
SC108B 8 gal PC/SM
SC110 10 gal PC/SM
SC112 12 gal PC/SM/ED/RS/EED
SC 115 15 gal PC/SM/ED/RS/EED
SC117 17 gal PC/SM
SC118A 18 gal PC/SM
SC118B 18 gal PC/SM
*SC118C 18 gal PC/SM
SC122A 22 gal PC/SM/ED/RS/EED
SC122B 22 gal PC/SM/ED/RS/EED
SC122C 22 gal PC/SM
SC122E 22 gal PC/SM
SC124 24 gal PC/SM
SC126 26 gal PC/SM/ED/RS/EED
SC129 29 gal PC/SM
SC132A 32 gal PC/SM/ED/RS/EED
SC132B 32 gal PC/SM/ED/RS/EED
SC144 44 gal PC/SM
*SC118C has vertical end flange.
Pro Cell (PC) & Sportsman (SM)
Part # Cpty. FitsFB105 5 gal PC/SM
FB108A 8 gal PC/SM
FB108B 8 gal PC/SM
FB110 10 gal PC/SM
FB112 12 gal PC/SM
FB115 15 gal PC/SM
FB117 17 gal PC/SM
FB118A 18 gal PC/SM
FB118B 18 gal PC/SM
FB122A 22 gal PC/SM
FB122B 22 gal PC/SM
FB122C 22 gal PC/SM
FB122E 22 gal PC/SM
FB124 24 gal PC/SM
FB126 26 gal PC/SM
FB129 29 gal PC/SM
FB132A 32 gal PC/SM
FB132B 32 gal PC/SM
FB144 44 gal PC/SM
Enduro (ED)/Race Safe (RS)
Part # Cpty. FitsFB205 5 gal ED/RS/EED
FB208 8 gal ED/RS/EED
FB212 12 gal ED/RS/EED
FB215 15 gal ED/RS/EED
FB222A 22 gal ED/RS/EED
FB222B 22 gal ED/RS/EED
FB225 25 gal ED/RS/EED
FB232A 32 gal ED/RS/EED
FB232B 32 gal ED/RS/EED
Yellow Foam Blocks 6" x 6" x 6" foam block - Part No. FB6 12" x 12" x 12" foam block - Part No. FB12
Bolted End Load Can For ARCA and other touring seriesPart No. SC122E
NASCAR® Steel ContainerFully welded 20 gauge steel for Touring Series/ARCA/Pro Cup Part No. SC122E-NC - 22 gal.
Steel Containers-Powder Coated Aluminum Containers Replacement Foam
REPL
ACEM
ENT
CANS
/ FO
AM
23 800-433-6524 Email: sales@fuelsafe.com www.fuelsafe.com 23
If you will be using more than 80 percent of your fuel capacity before refueling, you will benefit from the use of a collector (surge tank) which collects fuel more efficiently than a large open bottom tank. Whether you are looking to run down to the last ounce of fuel or just want to ensure a solid supply for an EFI set-up, our various collector options can fill your needs.
6" x 6" x 4" Polymer Surge Tank Collectors
With 3 Ball Check ValvesPart No. ST100
With 3 Ball Check Valves & fitting. Specify pickup size: -6, -8, -10. Part No. ST100-6 (or -8 or -10)
With 3 Machined Aluminum DoorsPart No. ST100-B
With 3 Machined Alum. Doors. Specify pickup size: -6, -8, -10Part No. ST100A-B
With 3 Machined Aluminum Doors, Bosch 044 High Pressure Pump, Filter and Wire HarnessPart No. ST100-HPB-B
With Low Pressure Pump, Filter & Wire HarnessPart No. ST100-LP
With High Pressure Pump, Filter & Wire HarnessPart No. ST100-HP
With 3 Ball Check Valves,Bosch 044 High PressurePump, Filter & Wire HarnessPart No. ST100-HPB
ColleCTors
Fabric Flexible Collectors
Corner Collector w/ (2) Ball Check Valves (Sides 6.5" x Face 9.5" x Height 5.25")Part No. ST100B
Center Collector w/ (3) Ball Check Valves (7.5" x 6" x 5")Part No. ST100C
Corner Box Collectorw/(2) Ball Check Valves(7.5" x 6" x 5")Part No. ST100D
Center Collector w/ 3 Machined Alum. Doors & Directional Fins (7.5" x 6" x 5" excluding fins)Part No. ST100E-B
Corner Box Collector w/ 2 Machined Alum. Doors (7.5" x 6" x 5")Part No. ST100D-B
Center Collector w/ (3) BallCheck Valves & Directional Fins (7.5" x 6" x 5" excluding fins)Part No. ST100E
Corner Collector w/1 Machined Alum. Door (Sides 6.5" x Face 9.5" x Height 5.25")Part No. ST100B-B
Center Box Collector with3 Machined Alum. Doors(7.5" x 6" x 5")Part No. ST100C-B
1" Surge Tank Check ValvePart No. CV100
Trap Doors and Check Valves
1½" Trap Door Check Valve, alum., with O-ring seal & feed rampPart No. TD150-OR
COLLECTORS
24 800-433-6524 Email: sales@fuelsafe.com www.fuelsafe.com
Fill PlaTes / elboWs
6X10 dual 2¼" remote aluminum plate w/ fill & vent check valves for dual dry break (pictured)Part No. DR250
6X10, 4-3/4" BC w/ -8 pickup and -8 ventPart No. ML6X10A
6X10 fill plate,1" vent, 4-3/4" BCPart No. ML6X10B (pictured above)1" vent & steel ball, 4-3/4" BC - Part No. ML6X10BS1¼" vent valve - Part No. ML6X10C1¾" vent valve - Part No. ML6X10D
6X10, offset filler, -8 pickup, -8 vent, 4-3/4" BCPart No. ML6X10E6X10, offset filler & sender provision, 4-3/4" BC Part No. ML6X10E-S (pictured above)
Standard Style Fill Plates
Remote Style Fill Plates
Multi-Location Fill Plates
6X10, 2.5" cap w/ rollover protection, -8 vent, -8 pickup - Part No. SF6X10A 6X10 aluminum fill plate w/ 45° remote fill, single
-8 pickup, single -8 vent w/ rollover protection, extra capped bulkhead, sender provision2.25" remote fill - Part No. ML6X10RF-2252.5" remote fill - Part No. ML6X10RF-2503" remote fill - Part No. ML6X10RF-300
6X10, 2.25" cap w/ rollover protection, -8 vent, -8 pickup - Part No. SF6X10B
6X10, 2.5" cap w/ rollover protection, alum.Part No. SF6X10C
6X10 fill plate, 4" cap, -8 vent, -8 pickupPart No. SF6X10D
4x6 fill plate, 3" rollover valve & 1" ventPart No. RF390B4x6 fill plate, 2¼" rollover valve & 1" vent check valvePart No. RF4X6B
4x6 fill plate, 2.5" cap w/ rollover protectionPart No. SF4X6D
Fuel Safe's standard 6X10 fill plate w/ 2.5" cap w/ rollover protection -8 pickup, -8 vent, -8 return capped off, provision for senderSteel plate - Part No. SF6X10E Aluminum plate - Part No. SF6X10E-A
4x6 fill plate, 3" rollover valvePart No. RF390A4x6 fill plate, 2.25" rollover valvePart No. RF4X6A
4x6 fill plate, 2.25" cap w/ rollover protection, -6 vent, -6 pickupPart No. SF4X6B
4x6 fill plate, 2.25" cap & neck, w/ rollover protection, -6 vent, -6 pickupPart No. SF4X6C
6X10 dual remote 2.25" w/ 45° fill valves, aluminumPart No. DR245A6X10 dual remote 2.5" w/ 45° fill valves, aluminumPart No. DR245B 6X10, 45° 3" dual remote plate w/1" vent aluminumPart No. DR345 (pictured above)
Rubber ElbowsTough, for use with remote fill plates45° elbow , 2¼" - Part No. RE45-22545° elbow, 3" - Part No. RE45-390° elbow, 2¼" - Part No. RE90-22590° elbow , 3" - Part No. RE90-3
FILL
PLA
TES
/ RUB
BER
ELBO
WS
25 800-433-6524 Email: sales@fuelsafe.com www.fuelsafe.com 25
AN 45° Hose Barb, Lightweight-6, 3/8" - Part No. HFL45-6-8, 1/2" - Part No. HFL45-8-10, 5/8" - Part No. HFL45-10-12, 3/4" - Part No. HFL45-12
AN 45° Hose Barb, Brass Plated-6, 3/8" - Part No. HF45-6-8, 1/2" - Part No. HF45-8-10, 5/8" - Part No. HF45-10-12, 3/4" - Part No. HF45-12 AN 90° Hose Barb, Brass Plated-6, 3/8" - Part No. HF90-6-8, 1/2" - Part No. HF90-8-10, 5/8" - Part No. HF90-10-12, 3/4" - Part No. HF90-12
AN 90° Hose Barb, Lightweight-6, 3/8" - Part No. HFL90-6 -8, 1/2" - Part No. HFL90-8 -10, 5/8" - Part No. HFL90-10-12, 3/4" - Part No. HFL90-12
Fuel and Vent Hookup Fittings - AN Straight Hose Barb, Lightweight-6, 3/8" - Part No. HFL00-6-8, 1/2" - Part No. HFL00-8-10, 5/8" - Part No. HFL00-10-12, 3/4" - Part No. HFL00-12
Fuel and Vent Hookup Fittings -AN Straight Hose Barb, Brass plated-6, 3/8" - Part No. HF00-6-8, 1/2" - Part No. HF00-8-10, 5/8" - Part No. HF00-10-12, 3/4" - Part No. HF00-12
AN Hose Barbs
HF00 HF45 HF90
HFL45 HFL90HFL00
Bulkhead Fittings
BHF00 BHF90
Straight Fittings 90° Fittings -4, 1/4" - Part No. BHF00-4 -4, 1/4" - Part No. BHF90-4 -6, 3/8" - Part No. BHF00-6 -6, 3/8" - Part No. BHF90-6 -8, 1/2" - Part No. BHF00-8 -8, 1/2" - Part No. BHF90-8-10, 5/8" - Part No. BHF00-10 -10, 5/8" - Part No. BHF90-10 -12, 3/4" - Part No. BHF00-12 -12, 3/4" - Part No. BHF90-12
(mounted on multi-location plate)2-1/4" 90° Rollover Valve (4-3/4" BC) - Part No. FV290A2-1/2" 90° Rollover Valve (4-3/4" BC) - Part No. FV290B3" 90° Rollover Valve (4-3/4" BC) - Part No. FV3902-1/4" 90° Rollover Valve (5-3/8" BC) - Part No. CTR225-903" 90° Rollover Valve (5-3/8" BC) - Part No. CTR300-902-1/4" 45° Rollover Valve (4-3/4" BC) - Part No. FV245A2-1/2" 45° Rollover Valve (4-3/4" BC) - Part No. FV245B2-1/4" 45° Rollover Valve (5-3/8" BC) - Part No. CTR225-452-1/4" Rollover Valve (4-3/4" BC) - Part No. QF2453" Rollover Valve (4-3/4" BC) - Part No. QF345
Remote Fill Valves
FV290/FV390 FV245 QF245/QF345
2-1/2" Rollover Valve, 4¾" BC - Part No. FV290B-C2-1/4" Rollover Valve, 4¾" BC - Part No. FV290A-C
AN "Y" fitting, lightweight, aluminum-8 female to two -6 males - Part No. HFL-Y- 8-6-8 female to two -8 males - Part No. HFL-Y-8
AN straight bulkhead fitting, billet aluminum blue anodized, steel washer, nylon washer and nut.-6 AN to -8, -8 through plate - Part No. BHF00-8-6-8 AN to -10, -10 through plate - Part No. BHF00-10-8
FV290A-C (Bayonet)
Standard Fill Valves
Adapters
FV290B-C (Threaded)
Fill valves / bulkhead FTGs. FILL VALVES / BULKHEAD FITTINGS
26 800-433-6524 Email: sales@fuelsafe.com www.fuelsafe.com
Vent Check Valveswith Rollover Protection
venT valves / venT FilTers
In hose 3/8" Rollover Vent ValvePart No. RV38
-8 return check valvePart No. ITRV08
-4 vent check valve, low clearance 90°, 1/4" out vent, was PN 1FLU101Part No. THV45
In tank or inline vent valve,red anodized aluminum-6 AN - Part No. TPV68mm hose barb - Part No. TPV8
In line vent valve with 7 mm hose barb, with rollover protection, red anodized aluminumPart No. TRL7
-8 in tank vent check valvePart No. ITVV08with spring for standard fillPart No. ITVV08S
In tank vent check valve 90° fitting-6 - Part No. ITVV06-90-8 - Part No. ITVV08-90-10 - Part No. ITVV10-90
1" Check ValvePart No. ITV100
1-3/4" Check ValvePart No. ITV175
1" Weld-in Check ValvePart No. ITV100-NF
Large Diameter Vent Check Valves with Rollover Protection. For positive shut-off and faster refueling. Mounts in bladder.
-6 return check valvePart No. ITRV06
In Tank Rollover Return Valves
Pressure Relief Vent Valve
3/8" - Part No. VF381/2" - Part No. VF121" - Part No. VF100
In Line Vent Valve Air Vent Filters Rollover Valve
In tank Rollover Return Valve, High Performance-6, 3/8" - Part No. ITRV06HP-8, 1/2" - Part No. ITRV08HP-10, 5/8" - Part No. ITRV10HP
-10 in tank vent check valve assemblyPart No. ITVV10
-6 in tank vent check valvePart Number ITVV06with spring for standard fill Part No. ITVV06S
In line vent check valveOffers positive shut-off-6, 3/8" - Part No. ILVV06-8, 1/2" - Part No. ILVV08
High Flow Vent Valve-10 in tank check valve with low profile cap and internal springPart No. ITVV10LP-S
-8 (1/2") in tank discriminator valve bulkhead/plate mountPart No. ITDV08
Discriminator Valves (discriminates between gas and air)
1" discriminator valve with -12 fittings, external mountPart No. DV100
In tank discriminator(-10, -12, -16) Must be welded in a platePart No. ITDV
1-3/4" external mounted discriminator valvePart No. DV175
VENT
VAL
VES
/ VEN
T FI
LTER
S
27 800-433-6524 Email: sales@fuelsafe.com www.fuelsafe.com 27
PumPs / harnesses / PiCkuPs
3/8" Horizontal - Part No. FS381/2" Horizontal - Part No. FS12
FSHP adapter for Bosch pump to FSHP Filter Part No. 1HDW52
In Tank Fuel Pumps & FiltersBosch Pump & Accessories
Low Pressure Pump (4-6 PSI) 35 gphPart No. FPLPComes with filter - Part No. FSLP
Bosch High Output Pump 200 liters per hour (52.5 gph) at 72 psi (5 bar) at 13A, comes with filterPart No. FPO44
High Pressure Pump (95 PSI) 80 gphPart No. FPHP Comes with filter - Part No. FSHP
Billet aluminum in-line check valve for Bosch pump. Threads directly onto pump outlet and -8 male AN fitting on outlet side. 2-3 PSI cracking pressurePart No. ILPCV08
3/8" Vertical - Part No. FS061/2" Vertical - Part No. FS08
Wiring Harnesses
Female, 2-wirePart No. WH04F2
Male 2-wire, with terminal for 1 FPHPPart No. WH04M2
Female, 4-wirePart No. WH04F4
Male 4-wire, withterminal for 2 FPHPPart No. WH04M4
Female, 5 pin, 4-wire, positive lockingPart No. WH05F4
Male, 5 pin, 4 wire(mount in plate)Part No. WH05M4
Male, 4 pin, 2 wire, 24" length, includes install kitPart No. WH04M2-NC
Male, 4 pin, 4 wire, 24" length, includes install kitPart No. WH04M4-NC
Includes 2 ft. hose, swivelhose barb & bulkhead fitting- 4 , 1/4" (no filter) - Part No. FP179 - 6, 3/8" (with filter) - Part No. FP180 - 8, 1/2" (with filter) - Part No. FP181- 10, 5/8" (no filter) - Part No. FP182- 12, 3/4" (no filter) - Part No. FP183
Corner Pick-up AssemblyDesigned for use where maximum fuel pick-up is required. Allows the fuel line to pick up the last drop of fuel.3/8" - Part No. CP381/2" - Part No. CP125/8" - Part No. CP58
Billet UltralightLow Profile PickupRequires mounting stud in bladder. -6 AN - Part No. BPU06-8 AN - Part No. BPU08-10 AN - Part No. BPU10
35 Micron Aluminumwith Stainless ElementOverall lengths4.5" Billet with -6 filter - Part No. FF200A6" Billet with -8 filter- Part No. FF200B6" Billet with -6 filter - Part No. FF250A8" Billet with -8 filter - Part No. FF250B
Plastic Low Profile PickupRequires mounting stud in bladder. -6 AN - Part No. LPP06-8 AN - Part No. LPP08-10 AN - Part No. LPP010
Pickup Accessories
In Line Filters
Fuel Pick-Up Kits
PUMPS / HARNESSES / PICKUPS
All wiring harnesses are 16 gauge.
28 800-433-6524 Email: sales@fuelsafe.com www.fuelsafe.com
Fill CaPsNewton "Monza Style" Fill Caps Newton Flush Fill Caps Standard Fill Caps
1¾" , 6 bolt, 2½" BCWas PN AFC175APart No. A26S
Locking insert for CF250 & CF275Part No. Z2L
A x B x C dimensions.More information atwww.fuelsafe.com/store.
3”, 9 bolt, 4” BCWas AFC300BPart No. A49S
1¾", 6 bolt, 2½" BC with weld flangeWas PN AFC175BPart No. A2NSX
A-3.2" x B-2.4" x C-1.1"Internal venting system•Flange neck: 3.25" dia•2.5 BC, 6 bolt•2" hose barb adapter on flange•Accepts fill nozzles up to 1.25" •in dia.
Part No. CF200
3", 9 bolt, 4" BC, w/ lockWas AFC300B-LPart No. A49L
2", 6 bolt, 3" BC, w/ lockWas AFC200A-LPart No. A36L
2", 6 bolt, 3" BCWas AFC200APart No. A36S
A-4" x B-3" x C-1.3"Internal venting system•Flange neck: 3.7" dia•3" BC, 6 bolt•Combination 2" or 2.25" •hose barb adapterLocking insert option•Accepts fill nozzles up to •1.25" in dia.
Part No. CF250
3”, 12 bolt, 4.75 BCWas AFC300APart No. A412S
1.75" threaded non vented fill cap with dipstick provisionPart No. FC175
2.5" threaded non vented fill cap Part No. FC250C
2.25" bayonet style, non vented fill capPart No. FC225
3" bayonet style, non vented fill capPart No. FC300
2”, 6 bolt, 3" BC w/ 2" & 2.25" remote flangeWas AFC200BPart No. A36NS2
A-4.6" x B-3.3" x C-1.3"Chrome finish•Flange neck: 3.7" dia.•3" BC, 6 bolt•2" or 2.25" hose barb adapter •on flangeLocking insert option•Accepts fill nozzles up to •1.25" in dia.
Part No. CF275
3", 12 bolt, 4.75 BC, w/ lockWas AFC300A-LPart No. A412L
2”, 6 bolt, 3" BC w/ 2" & 2.25" remote flange, w/ lockWas AFC200B-LPart No. A36NL2
A-5.2" x B-3.9" x C-3.6"With locking insert•Compression style mounting •flange 3.7" dia.2" or 2.25" hose barb adapter •on flangeAccepts fill nozzles up to •1.25" in dia.
Part No. CF300
4" fill bail cap, bayonet style (fits FN400 & CTF400)Part No. FC400
FILL
CAP
S
29 800-433-6524 Email: sales@fuelsafe.com www.fuelsafe.com 29
dry breaks / Fill equiPmenTRedhead® Dry BreaksFemale 1.5" tank mount1.75" receiver, no bulbPart No. DBF125A
Female 4" BC flange, tank mount for DBM200R, 2.5" receiver, no bulbPart No. DBF225B
Female 4.75" BC , tank mount for DBM200R, 2.5" receiver, no bulbPart No. DBF225C
Female 1½" remote mount, 1.75" receiver with aluminum bulbPart No. DBF125B
Male, 1.5" hose barb, 1.75" probe, 1.25" ID borePart No. DBM125
Male, 2.25" hose barb, 2.5" probe, 2" ID borePart No. DBM200R
Female 2.25" or 2.5" hose barb with polymer bulbPart No. DBF300R
Big Bore Dry Break, Female, 2.25" hose barb, 2.5" receiverPart No. DBF300R-A225Big Bore Dry Break, Female, 3" hose barb, 2.5" receiverPart No. DBF300R-A3
Double Dry Break, Female, 4.5" center, 2.5" receiver, 2.25" hose barb with aluminum bulbPart No. DDBF225R-100Double Dry Break, Female, 100mm center, 2.5" receiver, 2.25" hose barb with aluminum bulbPart No. DDBF225R-4.5
Double Dry Break, Female, 4.5" center, tank mount, 2.5" receiver, no bulbPart No. DDBF225T-4.5Double Dry Break, Female, 100mm center, tank mount, 2.5" receiver, no bulbPart No. DDBF225T-100
Double Dry Break, Male, 100 mm center, 2.5" probe, 2.25" hose barb, 2" ID borePart No. DDBM225R-100Double Dry Break, Male, 4.5" center, 2.5" probe, 2.25" hose barb, 2" ID borePart No. DDBM225R-4.5
Redhead® Dry Break Rebuild Kits
Quick Fill Dump Cans11 gallon - Red - Part No. DC011R11 gallon - White - Part No. DC011W
Refueling Vent Bottle5 gallon/20 liter. Can be used for filling or to catch vent overflow.Part No. DC006
Big Bore Filler4" neck fits 3" hose Part No. FN400Fender Fillers & Adapters
2.25" recessed remote fender fillerPart No. RFF225
3" recessed remote fender fillerPart No. RFF300
Fender Adapter9 bolt for 3" AFC300B cap, with hose barb, without nut-ring2.25" - Part No. FA300-2253" - Part No. FA300-300
2.25" recessed remote fender filler kit includes RFF225, 2' filler hose, 2' aluminum tubing and hose clampsPart No. RFK225
3" recessed remote fender filler kit includes RFF300, 2' filler hose, 2' aluminum tubing and hose clampsPart No. RFK300
DRY BREAKS / FILL EQUIPMENT
Female, for 2.25" receiver, 2" ID borePart No. 1HDW39Male, 2.5" probe, 2" ID borePart No. 1HDW40Female, 1.75" receiver, 1.25" ID borePart No. PP125FMale, 1.75" probe, 1.25" ID borePart No. PP125M
30 800-433-6524 Email: sales@fuelsafe.com www.fuelsafe.com
Electronic Parts
Sending Units
Fire boTTles / senders / misC.
LED Panel LightLED 12 Volt Panel LightPart No. 1ELE52
Electronic fuel level sending units are specially designed for fuel cells and bladders. No mov-ing parts make these units very durable. Send-ing units can be shortened to fit your cell and recalibrated for accuracy. Must specify OHM range (empty to full) when ordering.
Length/OHM Range Part No.12" probe, 0-90 SUP12 0-9012" probe, 10-180 SUP12 10-18012" probe, 240-33 SUP12 240-3312" probe, 76-6 SUP12 76-624" probe, 0-90 SUP24 0-9024" probe, 10-180 SUP24 10-18024" probe, 240-33 SUP24 240-33Add -L to part number for fullyadjustable low level light assembly.
Fuel Gauge0-90 OhmGas GaugePart No. GA200
Dip Stick, -6 bulkhead. Standard length is 18".Part No. DS08
Filler Cap, 1-3/4" non-vented, black anodized finish. Standard length is 18".Part No. FC175-DS
Float Switch (350 Milliamp)Part No. 1ELE51
Blank Aluminum PlatesComes with bolt kit and gasket.12 Bolt Oval - 4" x 6" - Part No. 1PLA0524 Bolt Oval - 6" x 10" - Part No. 1PLA1312 Bolt Circle - 4-3/4" BC - Part No. 1PLA1410 Bolt Circle - 3-1/8" BC - Part No. 1PLA166 Bolt Circle - 2-15/16" BC - Part No. 1PLA186 Bolt Circle - 2" BC - Part No. 1PLA305 Bolt Circle (Sending Unit) - Part No. 1PLA344 Bolt Circle - 1-5/8" BC - Part No. 1PLA629 Bolt Circle - 4" BC - Part No. 1PLA73 16 Bolt Circle - 6" BC - Part No. 1PLA75(Anodized plates are 2PLA series; i.e. 2PLA05.)
Gaskets10 Bolt Circle - 3-1/8" BC - Part No. 1GAS075 Bolt Circle (Sending Unit) - Part No. 1GAS694 Bolt Circle - 1-5/8" BC - Part No. 1GAS746 Bolt Circle - 2-15/16" BC - Part No. 1GAS756 Bolt Circle - 2" BC - Part No. 1GAS769 Bolt Circle - 4" BC - Part No. 1GAS7712 Bolt Circle - 4-3/4" BC - Part No. 1GAS7812 Bolt Circle - 5-3/8" BC - Part No. 1GAS7924 Bolt Oval - 6" x 10" - Part No. 1GAS9712 Bolt Oval - 4" x 6" - Part No. 1GAS98
Nylon Washer Kits1.080" ID x 1.5" OD (10 count) - Part No. GK53-10 bulkhead fitting (10 count) - Part No. GK54-8 bulkhead fitting (10 count) - Part No. GK55.583" ID x .937" OD (10 count) - Part No. GK56.25" ID x .5" OD (50 count) - Part No. GK57
Displacement BlocksTune your fuel cell's volume. Custom sizes also available.1/8 gallon, 2-7/8" x 2-7/8" x 3-3/8" - Part No. DB025 1/2 gallon, 8-3/4" x 3-1/2" x 3-1/2" - Part No. DB0501 gallon, 8-1/4" x 5-1/4" x 5-1/4" - Part No. DB1002 gallon, 5" x 8" x 12" - Part No. DB200
Dip Sticks
Clear Hose Vent/ Fill1" ID Wire Reinforced - Part No. CVH100W1" ID Nylon Reinforced - Part No. CVH100N1" ID Helix Reinforced - Part No. CFH100H1.25" ID Helix Reinforced - Part No. CVH125H1.5" ID Helix Reinforced - Part No. CFH150H2" ID Helix Reinforced - Part No. CFH200H2" ID w/ Copper Ground Wire - Part No. CFH200WC2.25" ID Not reinforced - Part No. CFH2252.25" ID Wire Reinforced - Part No. CFH225W2.5" ID w/ Copper Ground Wire - Part No. CFH250WC2.5" ID Helix Reinforced - Part No. CFH250H3" ID Helix Reinforced - Part No. CFH300H3" ID w/ Copper Ground Wire - Part No. CFH300WC
Fire Safe™Fire Suppression Systems
FSK225-A-SL FSK4002.25 liter aluminum bottle with charge •gaugeSteel mounting base, mounting straps•12 & 6 foot pull cable, one each•2 nozzles and 1 tee fitting•12' tubing•2 E stickers•
4 liter steel bottle with charge gauge•Steel mounting base, mounting straps•12 & 6 foot pull cable, one each•6 nozzles, 5 tee fittings, 1 bulkhead •fitting15' tubing•2 E stickers•
Charged to 7 Bar (100 PSI),System weight: 11 lbs.Length 14" Diameter 5"Part No. FSK225-A-SL
Charged to 8 Bar (116 PSI)System weight: 18 lbs.Length 17" Diameter 6"Part No. FSK400FSK400 shown
Low Level SensorsFor positive indication of low fuel levels. 6" probe - Part No. 1ELE0712" probe - Part No. 1ELE1324" probe - Part No. 1ELE08
Black, Wire Reinforced, 2.25" ID, sold in 10' lengthsPart No. BFH225
FIRE
BOT
TLES
/ SE
NDER
S/MI
SC.
Pickup Hose-4, 1/4" ID - Part No. PUH04-6, 3/8" ID - Part No. PUH06 -8, 1/2" ID - Part No. PUH08-10, 5/8" ID - Part No. PUH10-12, 3/4" ID - Part No. PUH12 5/16" ID - Part No. 1HOS31
top related