dth hammer 5” - desco-inc.com hammer 5.p… · dth hammer backhead thread length outside diameter...

No12345678910111213141516

Part NameBack headB.H. O-ringSpace ringDisk SpringCheck valveChockC.V springAir distributorA.D. O-ringInner cylinderPistonCasePiston retainer ringBit. retainer ringBit. ret. O-ringChuck

Part No5.0T-015.0T-01-15.0T-03-15.0T-05-15.0T-065.0T-06-15.0T-06-25.0T-085.0T-08-15.0T-105.0T-115.0T-125.0T-11-15.0T-195.0T-19-15.0T-20

Notice

of the other shanks.

SPECIFICATIONDTH HammerBackhead ThreadLengthOutside DiameterWeightShank Type

5” HammerAPI 3*1/2 REG. Pin 1,112mmDia. 121mm68kgDHD350, SD5, QL5

AIR CONSUMPTION CHART150 PSI (10.5bar)250 PSI (17.5bar)350 PSI (24.5bar)

285CFM520CFM750CFM

MODEL TD50 SHANK TYPE DHD350

Desco Inc.(HQ/Manufacturer)HEAD OFFICE: 1240-1, Ok-Dong, Gwangsan, Gwangju, Korea

TEL : 82.62.952.4564 / FAX : 82.62.953.1593EXPORT DIVISION

2607 jidong, Lottecastle, 76, Soongin-Dong, Jongno-Gu, Seoul, KoreaTEL : 82-2-3670 6400 / FAX : 82-2-3670 6399

E-mail : desco@desco-inc,com

DTH HAMMER 5”DESCO INC. is at your solution and service.

1

2

3

4

56

7

8

9

10

11

12

13

14

15

16

No1234567891011121314151617

Part NameBack headB.H. O-ringSpace ringMake-up ring(urethane)Check valveChockC.V springAir distributorA.D. O-ringInner cylinderPistonCasePiston retainer ringBearingBit. retainer ringBit. ret. O-ringChuck

Part No5.0A-015.0A-01-15.0A-03-15.0A-04-15.0A-065.0A-06-15.0A-06-25.0A-085.0A-08-15.0A-105.0A-115.0A-12(Q)5.0A-11-15.0A-14(Q)5.0A-19(Q)5.0A-19-15.0A-20(Q)

Notice

of the other shanks.

SPECIFICATIONDTH HammerBackhead ThreadLengthOutside DiameterWeightShank Type

5” HammerAPI 3*1/2 REG. Pin 1,112mmDia. 121mm68kgDHD350, SD5, QL5

AIR CONSUMPTION CHART150 PSI (10.5bar)250 PSI (17.5bar)350 PSI (24.5bar)

285CFM520CFM750CFM

MODEL ACE50 SHANK TYPE QL50

Desco Inc.(HQ/Manufacturer)HEAD OFFICE: 1240-1, Ok-Dong, Gwangsan, Gwangju, Korea

TEL : 82.62.952.4564 / FAX : 82.62.953.1593EXPORT DIVISION

2607 jidong, Lottecastle, 76, Soongin-Dong, Jongno-Gu, Seoul, KoreaTEL : 82-2-3670 6400 / FAX : 82-2-3670 6399

E-mail : desco@desco-inc,com

DTH HAMMER 5”DESCO INC. is at your solution and service.

1

2

3

4

5 6

7

8

9

10

11

12

14

13

15

16

17

No12345678910111213141516

Part NameBack headB.H. O-ringSpace ringDisk SpringCheck valveChockC.V springAir distributorA.D. O-ringInner cylinderPistonCasePiston retainer ringBit. retainer ringBit. ret. O-ringChuck

Part No5.0T-015.0T-01-15.0T-03-15.0T-05-15.0T-065.0T-06-15.0T-06-25.0T-085.0T-08-15.0T-105.0T-115.0T-125.0T-11-1(S)5.0T-19(S)5.0T-19-1(S)5.0T-20(S)

Notice

of the other shanks.

SPECIFICATIONDTH HammerBackhead ThreadLengthOutside DiameterWeightShank Type

5” HammerAPI 3*1/2 REG. Pin 1,112mmDia. 121mm68kgDHD350, SD5, QL5

AIR CONSUMPTION CHART150 PSI (10.5bar)250 PSI (17.5bar)350 PSI (24.5bar)

285CFM520CFM750CFM

MODEL TD50 SHANK TYPE SD5

Desco Inc.(HQ/Manufacturer)HEAD OFFICE: 1240-1, Ok-Dong, Gwangsan, Gwangju, Korea

TEL : 82.62.952.4564 / FAX : 82.62.953.1593EXPORT DIVISION

2607 jidong, Lottecastle, 76, Soongin-Dong, Jongno-Gu, Seoul, KoreaTEL : 82-2-3670 6400 / FAX : 82-2-3670 6399

E-mail : desco@desco-inc,com

DTH HAMMER 5”DESCO INC. is at your solution and service.

1

2

3

4

56

7

8

9

10

11

12

13

14

15

16