drum pump range - global pumps australia | … · techniflo drum pumps are lightweight, handy and...
Post on 19-Aug-2018
227 Views
Preview:
TRANSCRIPT
Drum Pump Range
S40701
2 or to request a quoteT(+61 8) 8275 8000F(+61 8) 8275 8099
sales@globalpumps.com.auwww.globalpumps.com.au
For more information 12 Selgar AvenueClovelly Park SA 5042
Contents
3
Electric Powered
Electric Powered
Electric Powered
Electric Powered
Electric Powered
Electric Powered
Electric Powered
Electric Powered
Air Powered
Electric powered
Electric Powered
Electric Powered
TP - 160
TP - 180
TP - 280
TP - 360
TP - 380
TP - 400Ex, ATEX Approved
TP - 500SM, Three Phase
TP - Air 1, 2, 3
TP - 700SR, High Viscosity
TP - 700DRE
TP - DRA
Accessories
5
5
5
6
6
6
7
7
8
9
9
9
10
Introduction
Examples of Liquids
TP - 125, 128, 132
4
4
Electric Powered
Introduction
Examples of liquids
Techniflo drum pumps are lightweight, handy and extremely powerful devices suitable for transferring thin to low viscous, neutral or corrosive liquids. Designed for portable and static use, the pumps are particularly suitable for intermittent operation. The combination of both electric powered and compressed air powered state-of-the-art motors are simple — yet have a high technical design which will assure sound and reliable operation. Because of their modular concept, every motor can be combined with every pump tube. The delivery rate can be regulated in accordance with your needs. An electronic power regulator is available for this purpose.
Pumps fitted with compressed air motors and stainless steel pump tubes provide a particularly high level of safety when pumping lightly flammable liquids of various danger classes from one container to another.
Hydrochloric acid, soda lye, formic acid, sal ammoniac, photo developer, lime potash, fixing baths, acetic acid, phosphoric acid, fruit acids, nitric acid, hydrofluoroc acid, bleaching solution, water, lactic acid, boric acid, chromic acid, alcohols, food additives, soap solutions and a wide range of other liquids.
For flammable liquids and for use in explosive surroundings, explosion-proof drum pumps with necessary accessor ies can be suppl ied.
Motor and pump tube require ATEX approval for flammable liquids.
4
Electric Powered
TP - 125, 128, 132
TP - 160
TP - 180
Pump Type
Pump Tube Type
Flow Rate (l/min)
Head Rotor/Impeller (m)
Max Viscosity (MPas)
Tube Diameter (mm)
Tube Length (mm)
Construction
Motor Power (W)
Motor Voltage (V/Hz)
Weight (kg)
TP-125, 128, 132
PP/SS 316Ti
22/30/40
4
200
25/28/32/PP28/32SS
500/700/1000/1200
sealless
250 (universal motor)
240/50
2-4
TP-160
PP/PVDF/SS 316Ti/Al
80
6/12
300
41
700/1000/1200/1500+
sealless (SS with mech seal)
400 (universal motor)
240/50
7-10
Pump Type
Pump Tube Type
Flow Rate (l/min)
Head Rotor/Impeller (m)
Max Viscosity (MPas)
Tube Diameter (mm)
Tube Length (mm)
Construction
Motor Power (W)
Motor Voltage (V/Hz)
Weight (kg)
TP-180
PP/PVDF/SS 316Ti/Al
150
8/21
500
41
700/1000/1200/1500+
sealless (SS with mech seal)
600 (universal motor)
240/50
7-10
Pump Type
Pump Tube Type
Flow Rate (l/min)
Head Rotor/Impeller (m)
Max Viscosity (MPas)
Tube Diameter (mm)
Tube Length (mm)
Construction
Motor Power (W)
Motor Voltage (V/Hz)
Weight (kg)
Laboratory pump. Suitable for drums and containers with a narrow neck.
Pump tube can be combined with an air motor or any other TECHNIFLO motor.
Double insulated, category II, Splash proofing, to IP24.
O n / o f f s w i t c h T h e r m o -protection.
Suitable for liquids with specific gravity up to 1.35.
With electronic speed control available as an option.
Double insulated, category II, Splash proofing, to IP24.
On/off switch with low voltage release as standard.
Overload protection switch.
Suitable for pumping fluid acids and bases, neutral, aggressive and non-flammable liquids.
Suitable for liquids with specific gravity up to 1.45.
With electronic speed control available as an option.
Double insulated, category II, Splash proofing, to IP24.
On/off switch with low voltage release as standard.
Overload protection switch.5
Electric Powered
TP - 280
TP - 360
TP - 380
Pump Type
Pump Tube Type
Flow Rate (l/min)
Head Rotor/Impeller (m)
Max Viscosity (MPas)
Tube Diameter (mm)
Tube Length (mm)
Construction
Motor Power (W)
Motor Voltage (V/Hz)
Weight (kg)
TP-280
PP/PVDF/SS 316Ti/Al
200
14/28
1000
41
700/1000/1200/1500+
sealless (SS with mech seal)
825 (universal motor)
240/50
7-10
TP-360
PP/PVDF/SS 316Ti/Al
93
74
11/26 max
600
41
700/1000/1200/1500+
sealless (SS with mech seal)
650
240/50
7-10
Pump Type
Pump Tube Type
Flow Rate Rotor (l/min)
Flow Rate Impeller (l/min)
Head Rotor/Impeller (m)
Max Viscosity (MPas)
Tube Diameter (mm)
Tube Length (mm)
Construction
Motor Power (W)
Motor Voltage (V/Hz)
Weight (kg)
TP-380
PP/PVDF/SS 316Ti/Al
112
74
16/37 max
1000
41
700/1000/1200/1500+
sealless (SS with mech seal)
825
240/50
7-10
Pump Type
Pump Tube Type
Flow Rate Rotor (l/min)
Flow Rate Impeller (l/min)
Head Rotor/Impeller (m)
Max Viscosity (MPas)
Tube Diameter (mm)
Tube Length (mm)
Construction
Motor Power (kW)
Motor Voltage (V/Hz)
Weight (kg)
Industrial grade.
Suitable for liquids with specific gravity greater than 1.5.
With electronic speed controlavailable as an option.
Double insulated, category II, Splash proofing, to IP24.
On/off switch with low voltage release as standard.
Overload protection switch.
Suitable for pumping fluid acids and bases, neutral, aggressive and non-flammable liquids.
Suitable for liquids with specific gravity up to 1.5.
With electronic speed control and soft start.
Double insulated, category II, rated to IP55.
On/off switch with low voltage release as standard.
Overload protection switch.
Suitable for pumping fluid acids and bases, neutral, aggressive and non-flammable liquids
Suitable for liquids with specific gravity up to 1.9
With electronic speed control and soft start
Double insulated, category II, rated to IP55
On/off switch with low voltage release as standard
Overload protection switch6
Electric Powered
TP - 400EX, ATEX Approved TP-400Ex
PP/PVDF/SS 316Ti/Al
100
8/20
600
41
700/1000/1200/1500+
sealless (SS with mech seal)
550 Ex
240/50
12-15
Pump Type
Pump Tube Type
Flow Rate (l/min)
Head Rotor/Impeller (m)
Max Viscosity (MPas)
Tube Diameter (mm)
Tube Length (mm)
Construction
Motor Power (W)
Motor Voltage (V/Hz)
Weight (kg)
EX protected pump, suitable for flammable liquids.
EC Type Examination.
Cert No. DEMKO 03 ATEX 135563X.
EEx de IIA T6.
Splash proofing to IP54.
On/off and overload protection switch.
7
Air Powered
TP - AIR 1
TP - AIR 2
TP - AIR 3
Pump Type
Pump Tube Type
Flow Rate (l/min)
Head Rotor/Impeller (m)
Max Viscosity (MPas)
Tube Diameter (mm)
Tube Length (mm)
Construction
Motor Power (W)
Weight (kg)
TP-AIR 1
PP/PVDF/SS 316 Ti/Al
90
10/24
400
41
700/1000/1200/1500+
sealless (SS with mech seal)
300W at max 6 bar
operating pressure
3-5
TP-AIR 2
PP/PVDF/SS 316Ti/Al
120
10/27
600
41
700/1000/1200/1500+
sealless (SS with mech seal)
700W at max 6 Bar
operating pressure
3-5
Pump Type
Pump Tube Type
Flow Rate (l/min)
Head Rotor/Impeller (m)
Max Viscosity (MPas)
Tube Diameter (mm)
Tube Length (mm)
Construction
Motor Power (W)
Weight (kg)
TP-AIR 3
PP/PVDF/SS 316Ti/Al
120
10/27
600
41
700/1000/1200/1500+
sealless (SS with mech seal)
400W at max 6 Bar
operating pressure
4-5
Pump Type
Pump Tube Type
Flow Rate (l/min)
Head Rotor/Impeller (m)
Max Viscosity (MPas)
Tube Diameter (mm)
Tube Length (mm)
Construction
Motor Power (W)
Weight (kg)
Compressed air motor withball valve for compressed aircontrol. This regulates the motor speed and varies thepumping capacity.
EC Type Examination.
Cert No IBEx U05 ATEX B007 X
Compressed air motor withstarting button on the handle.The pump starts transferringliquids when the button ispressed.
An ATEX version with 600Wis also available.
8
C o m p r e s s e d a i r m o t o r , Stainless Steel housing, with plug valve at air intake for compressed air control. This regulates the motor speed and varies the pumping capacity.
EC Type Examination.
Cert No IBEx U05 ATEX B007 X
Electric Powered - High Viscosity
TP - 700 SR
TP - 700 DRE
TP - 700 DRA
Pump Type
Pump Tube Type
Flow Rate (l/min)
Delivery Head (m)
Max Viscosity (MPas)
Tube Diameter (mm)
Tube Length (mm)
Construction
Motor Power (W)
Stator Material
Weight (kg)
TP-700 SR
SS 316Ti
12/25/50
60 single stage/120 double stage
20,000
54
700/1000/1200-2000
Mechanical seal or gland
825W
NBR, NBR light, Hypalon,
Viton, EPDM and PTFE
6-14
Universal, solidly built, handyand powerful pump. For lightand viscous liquids such aspaint, varnish, oil, soap, washingliquids, fruit juice, jam, etc.
Driven by universal motor,TP-280 or compressed airmotors TP-AIR 2 and TP-AIR 3.
Pump tube with planetary gear(15:1).
Powerful, high-viscosity pumpfor permanent operation. Forp u m p i n g h i g h l y v i s c o u s substances such as latex basedpaint, glue, cream, paste, gel,chocolate mass, honey, etc.
D r i v e n b y 3 - p h a s e w i t h 0.37/0.55/0.75 or 1.1kW at700rpm or 900 rpm. Withpump hanger, flexible or rigidcoupling.
Versat i le , sol idly bui l t andpower fu l eccent r ic sc rew pump for highly viscous media such as sediment, pastes, soap, shampoo, honey, syrup,jam, ketchup, etc.
Dr iven by compressed a i rmotors TP-AIR 4 (0.5kW),6 (1.0kW), 8 (1.5kW).
With pump hanger, f lexibleor rigid coupling.
Pump Type
Pump Tube Type
Flow Rate (l/min)
Delivery Head (m)
Max Viscosity (MPas)
Tube Diameter (mm)
Tube Length (mm)
Construction
Motor Power (kW)
Stator Material
Weight (kg)
TP-700 DRE
SS 316Ti
12/25/50
60 single stage/120 double stage
20,000
54
700/1000/1200-2000
Mechanical seal or gland
0.37-2.2kW
NBR, NBR light, Hypalon,
Viton, EPDM and PTFE
15-30
Pump Type
Pump Tube Type
Flow Rate (l/min)
Delivery Head (m)
Max Viscosity (MPas)
Tube Diameter (mm)
Tube Length (mm)
Construction
Motor Power (kW)
Stator Material
Weight (kg)
TP-700 DRA
SS 316Ti
12/25/50
60 single stage/120 double stage
100,000
54
700/1000/1200-2000
Mechanical seal or gland
0.5-1.5kW
NBR, NBR light, Hypalon,
Viton, EPDM and PTFE
15-25
9
ACCESSORIES
Nozzle: Brass Nickel Plated, Teflon seal, rotating jointIdeally suited for filling and transferring liquids also in the food and pharmaceutical industry.
Hose connection: 25mm or 32mmWorking pressure: max. 4 barViscosity: 750 MPasFlow rate: 80 l/mmLiquid temperature: max. 80°CWeight: 1.4 kg
Strainer: Polypropylene Strainer,Stainless SteelRecommended when pumping dirty or contaminated liquidswith abrasive particles.
Nozzle: PolypropyleneHousing and internal pieces in black polypropylene PP, valve seats and O-rings are in Viton(FPM), spring in Titanium.
Hose connection: 19mm or 25mmWorking pressure: max. 2 barViscosity: 750 MPasFlow rate: 100 l/mmLiquid temperature: max. 50°CWeight: 0.26 kg
Barrel adaptors, PP• Ø41 mm• Ø32 mm
Barrel adaptors, Stainless Steel• Ø41 mm• Ø32 mm
Emission proof drum adaptor• PP• Brass• SS 316Ti
The adaptor prevents emission of harmful gases and vapours out of the drum.
Electronic FlowmeterPolypropylene housing. Other materials: POM, PVDF or Stainless Steel.Option: Volume pre-set, I/P & O/P for further data processing.
Mixing Pump Tube -Double Function
For pumping and mixing, sealless pump tubes made of PP with tube Ø50mm and lengths of 1m
for 200 litre drums and 1.2m for containers available. SS mixing pump tube is certified to conform to ATEX.
PP PVDF
SS316Ti AL
For different applications depending on the liquids, pump tubes are available in PP, PVDF, SS 316Ti and Aluminium. The pump tubes are connected to the motor via hand-wheel and can be fitted and removed with a few rotations fast and easy without the need of any special tools.• Pump tubes with axial-flow rotor are to be used for high
delivery rate and low head.• Pump tubes with radial-flow impeller are the right
choice for low delivery rate and high head.
10
or to request a quoteT(+61 8) 8275 8000F(+61 8) 8275 8099
sales@globalpumps.com.auwww.globalpumps.com.au
For more information 12 Selgar AvenueClovelly Park SA 5042
Drum Pump Range
Stock Availability
• A comprehensive range of pumps & spares are held in stock to meet immediate requirements.
Expertise
• Trained and experienced product specialists with expertise in handling the complete range of Techniflo products.
Technical Support
• Full technical information covering all aspects of pump performance including compatibility with materials and systems design...................
Advice
• Reliable advice regarding pump unit assembly, installation, operation, preventative maintenance programming and spare parts inventory..................
Service Support
• Full repair and service capabilities including scheduled servicings.....................................................
Quality Control
• Techniflo pumps are manufactured strictly in accordance with the requirements of ISO 9001:2008 to ensure the highest levels of product quality.
or to request a quoteT(+61 8) 8275 8000F(+61 8) 8275 8099
sales@globalpumps.com.auwww.globalpumps.com.au
For more information
12 Selgar Avenue
Clovelly Park SA 5042
S:\In
dust
rial\D
RA
WIN
GS
\Spec
Sheets
\S40701
top related