dleds street lights
Post on 13-Jun-2015
1.215 Views
Preview:
DESCRIPTION
TRANSCRIPT
Detas SpA - divisione DLEDS www.dleds.com
LED Street lights:state of the art Dleds products
1
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 2
The main reasons why the LED lighting is becoming an important role in the industry can be summarized with the following key factors:
1. Big energy saving replacing existing systems
2. Energy saving on new systems
3. Life of the new technology
4. Reduction of the maintenance costs
5. Better light quality
6. Environment friendly
7. Free choose of the color temperature
8. High electrical safety and power-on light immediately
LED key points
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 3
Most of the lighting fixtures in our countries are outdated and obsolete.
The recovery of energy efficiency appears to be a major factor in the consideration of the LED source as an alternative to the existing one.
The use of LED technology in the municipal area can be used for street lighting fixtures but also for lighting road bike paths, walkways, gardens, parks, common areas, parking lots, etc..
1. Recovery of energy efficiency on existing systems
Obsolete lighting fixture - Brescia
City – Garda Lake
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 4
When we speak about percentage energy saving of the LED fixture to
the standard existing lamp, we mean how much the new LED light can
save giving as a target the respect of the lighting class of the
EN13201.
Until few times ago, the choice of one light fixture rather then another
was made considering aesthetic and performances. Sometimes this
choice appears exceeded.
If, for example, sphere light fixtures are replaced ( emitting on 360°)
the recovery of the energy efficient will be probably the max. possible.
We can therefore say that the use of LED light fixtures can improve the
efficiency between 30 and 70% depending on the individual case.
How much you can save in percentage terms by replacing the existing lighting with LED technology?
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 5
Using LED lights on new systems can achieve interesting saving levels in consideration of the 2 following issue:
Reduction of one lighting category thanks to the high colorimetric index ( italian law UNI11248 )
Actual availability of led fixtures with “real” efficiency of more then 70 Lm/Watt
What does it mean “efficiency Lm/Watt”?
Since there is no rules on which information have to appear on the catalog of the LED streetlight manufacturers or importers, we assist to a different and sometimes misleading information..
2. Energy savings on new systems
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 6
The efficiency declared in the catalog (for example 100lm/watt or 5500 lm/watt if the lamp has 55 Leds) is related to the LED efficiency at the JCT of 25°C ( as declared by the manufacturer) or to the lamp in working conditions ?
Making a true compare between LED street lights
Appears clear as the luminous flux is referred to the Junction temperarature of 25°C : a condition not real in the actual practice
Extract from LED manufacturer catalog
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 7
Here is the graphic which let understood which can really be the efficiency of the “system”
LED efficiency VS junction temperature
Therefore, the LED efficiency is inversely proportional to the Junction Temperature It is surely important using LEDs with high efficiency but it is also important that the
lamp is equipped with a good heatsink so that the Led can keep a high level of performances.
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 8
Another important factor is the expectation in the life of the LED and also here it is necessary to clarify some important matters.
The life of the LEDs depends on several factors: Kind and Brand of the used LED. On the market are probably
thousands of manufacturers but only some of them can guarantee reliability, performance over the time.
As the LED is driven and heat sinked. The junction temperature is the key to understand how long can work the led.
The LED package and which reliability has the led once mounted on the printed circuit board.
3. Life time of the LED
Extract from LED manufacturer catalog
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 9
LED life can change from 50.000 to more then 100.000 hrs according
to which kind of led is used and from the junction temperature.
The life of the Led fixture depends not only on the above mentioned
factors but also on which kind of led driver is used and if additional
electronic circuit are present.
A led driver is reliable if it is certified and if the MTBF is declared.
3. Conclusion
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 10
The reduction of maintenance costs is referred basically to the life of the LED source, which we have evaluated in 3-6 times greater then the traditional sources.
The reduction of the maintenance is also given by the fact the the Led is a cold light, meaning that the light going our of the lamp is cool. For that reason it attracts less insects.
The Led street light is an electronic device and if it is well designed and produced can last
4. Reduction of maintenance cost
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 11
5. Better light quality
Several studies argue that there are many advantages of the LED light
compared on the old light.
We will mention few of them without make specific comments since the technical aspects of the vision can be debated.
The “white light” produced by the LED lights together with the high level of uniformity makes a better effect on the road.
We support our customers to make test on the roads and interview road users, pedestrian about the new technology.
Reduction of glaring effect if the lamp is designed with such feature.
Better uniformity thanks to the design of the led distribution.
Reduction of the reflection effect on the wet asphalt thanks to the better
uniformity without top spots.
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 12
6. Environmental friendly
LED lights do not contains any mercury or some other dangerous component. One LED light can be disassembled and all can be recycled
According to Standford University the mercury content in this small fluorescent light can pollute 4000 liters of water.
What about these lamps?
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 13
LED can be produced with several
color coordinates.
We call it “color temperature” in °K.
A typical offer in the current LED
market is about 3000°K or less
( Warm white ) 4000 °K (Neutral
white) and 5000 °K (cool white)
7. Free temperature color
Color temperature chart
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 14
LED power-on light immediately are typically sold with class 2 electrical safety ( double insulation).
It means that in case of a single failure there is no contact with any dangerous voltages from the user.
This is usually achieved at least in part by having two layers of insulating material surrounding live parts or by using reinforced insulation.
It is very important that LED light turns on immediately
8. High electrical safety and power-on light immediately
Example of fixture with class 2 electrical safety
15
Who we are
DLEDS is the division of Detas S.p.A. which deals with LED lighting.
Detas group is relatively young, but experience and expertise has been passed down from generation to generation since 1896 when in Pula (Istria) was born the first company producing materials and electrical systems.
Detas SpA operational headquarters is in Rezzato (Brescia) and in Nice there is the commercial subsidiary of the French group.The group's brands are
DETAS (industrial automation systems)
REO Italy (power electronics)
HAAKE Italy (man-machine security systems)
D-POWER (devices for signaling and road safety)
DLEDS (LED lighting)
Detas SpA is also ICOTEK GmbH distributor (fastening
systems).
Detas SpA - DLEDS division www.dleds.com info@dleds.com
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 16
DETAS DLEDS outdoor & streetlights
Patented LED lights for :
Urban design
Streetlights
Bycycle & pedestrian paths
Tunnels
Canopies
Parking
Using the LED technology in residential and city ambient means:
Choose the future
Being environmentally friendly
And the global sustainability
Reduce the light pollution
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 17
Municipalities luminaires –some examples
SaturnMizar
City Quincy
Custom retrofitting available
Housing different color available
Zero light pollution
Using one of top 3 LED
manufacturers in the world
Low Junction temperature for long
life
Power Factor >0.9
UL approved LED driver
High CRI index also available in
neutral white
Unexpensive dimmable
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 18
LED Street Lights
Twister
Mark Shark
Radiant 2
Asymmetric or Symmetric optics
Class 2 power supply
IP65 lights
Using one of top 3 LED
manufacturers in the world
Low Junction temperature
Zero light pollution
Power Factor correction >0.9
UL approved LED driver
High CRI index also available in
neutral white
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 19
LED Street Lights Detas DLEDS competitive advantages
Optical Design
In-House Gonio-
photometer
Photometric
Curves
Litestar-Design
20 years experience in power supply
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 20
Coming soon : STRATOS outperforming Led streetlight
Modular design
Using Luxeon Rebel 110
lm/W
Interdistance/Height=4
3 Years Warranty
Also available with 4000 °K
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 21
References
Garda See – Mark48
Autoroute in Florence – Atlas PE
Paris – Mizar
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 22
References
Monaco - Twister
Garda See - City
Brescia - Mark
Detas SpA - divisione DLEDS www.dleds.com info@dleds.com 23
DETAS SpA – divisione DLEDSHeadquartes: Via Treponti, 29 25086 Rezzato (BS)web: www.dleds.comemail: info@dledsT +39 030 2594120F +39 030 2792864
DETAS FRANCE 17 rue Guiglionda de Sainte Agathe - 06300 NICEemail: commercial@detas.frweb: www.detas.frT +33 4 83 73 51 90 / 91 F +33 4 93 55 24 09
Contacts
CEO Giorgio Durinemail: gdurin@detas.comT +39 030 2594120 int. 103
Sales dept.Grazia Barberaemail: gbarbera@detas.comT +39 030 2594120 int. 104
Marketing dept.Alex Rossi email:arossi@detas.comT +39 030 2594120 int. 126
top related