df-520 duplo folder instruction manual
Post on 23-Feb-2015
1.164 Views
Preview:
TRANSCRIPT
DUPLO CORPORATION
Duplo Folder
Please let our service people install the machine.
Instruction Manual
2
1. Easy to Use• Automatic detection of paper size (A3 to B6).
• A one touch function automatically returns the folding
stopper and stacker to their proper positions.
2. Enhanced Basic Performance• Folding speed of 45 to 120 sheets/min.(B4, 64g/m 2,
single fold).
• Loading capacity of the paper feed table: 500 sheets (B4
64g/m 2)
• Paper thickness: 52.3 to 157g/m 2
3. Various Memory Functions (Standard)• Correction memory function for fixed folding (36
types).
• Registration of special folding methods (MAX 2
memories).
4. Fixed Folding of Non-Fixed PaperCan Be Carr ied Out Easi ly byInputting Their Size on the Keypad.(Paper length folding mode)
5. Various Types of Paper (Art/CoatedPaper) Can Be Folded by EasyOperation.
6. Var ious Funct ions (Standard)Ensuring Folding Accuracy andUsability
• Test folding can be carried out.
• The counter display can be used for additions and
subtractions.
• A slant correction device is installed to straighteng
paper.
• Cross folding can be carried out.
FEATURES OF DUPLO FOLDER
DECLARATION OF CONFORMITY
Duplo Corporation, located at 7-6, Izumi Honcho 1-chome, Komae-shi, Tokyo 201. Japan, declares that the followingproduct.
Name of Product: Paper folding machine.Type No.: DF-520
complies with the provisions defined by Low Voltage Directive 73/23/EEC under the application of IEC Publication 950.Edition 1with Amendment 1 (1992) including the deviation of EN60950.
It was tasted by Japan Electrical Testing Laboratory Located at 14-12. Yoyogi 5-chome, Shibuya-ku. Tokyo 151, Japanunder the test number 93-0407.
ÜBEREINSTIMMUNGSERKLÄRUNG
Die Duplo Corporation mit Sitz in 7-6, Izumi Honcho 1-chome, Komae-shi, Tokio 201, Japan, versichert, daß das folgendeProdukt.
Bezeichnung des Produkts: PapierfaltmaschineTypen-Nr.: DF-520
die in der EWG-Niederspannungsrichtlinie 73/23/EEC festgelegten Bestimmungen erfullt, unter Anwendung der IECVeröffentlichung 950, Ausgabe 1 mit Zusatz 1 (1992), einschlieBlich Abweichung von EN60950.
Die Maschine wurde vom Jpapan Electrical Testing Laboratory mit Sitz in 14-12, Yoyogi 5-chome, Shibuya-ku, Tokio 151,Japan unter der Prüfnummer 93-0407 geprüft.
DECLARATION DE CONFORMITE
Duplo Corporation, située à 7-6, Izumi Honcho 1-chome, Komae-shi, Tokyo 201, Japon déclare que le produit suivant:
Nom du produit: Plieuse de papierN de type: DF-520
est conforme aux dispositions définies par la Directive sur la basse tension 73/23/EEC en application de la Publication IEC950. Edition 1 avec Amendement 1 (1992) y compris la dérogation de EN60950.
Ce produit a été mis à l'essai par Japan Electrical Testing Laboratory situé à 14-12, Yoyogi 5-chome, Shibuya-ku, Tokyo151, Japon, sous numéro d'essai 93-0407.
3
SAFETY PRECAUTIONSThank you for purchasing a Duplo Folder .This instruction manual describes the functions of the Duplo Folder
, how to operate it, and safety precautions in use.Before using your unit, read this instruction manual carefully in orderto use your unit correctly and get the best out of it.After reading the manual, keep it safely for future reference when youhave questions regarding your unit or when your unit malfunctions.
Safety SymbolsVarious safety symbols are shown in this instruction manual and labeled on the unit to guide you in usingyour unit correctly, and to prevent injuries to you and those around you, and other damages.These symbols have the following meanings.
Safety Symbols
Indicates death or serious injuries will result if this precaution is not followedand consequently, the unit is incorrectly handled.
Indicates injuries and damages to objects will result if this precautions is notfollowed and consequently, the unit is incorrectly handled.
The % symbols warn of possible danger.The specific danger is shown inside the %.(In this example, the symbol warns of possible electric hazard.)
The symbols show prohibited acts.
The specific prohibited act is shown inside the .(In this example, the symbol indicates disassembly is prohibited.)
The ¶ symbols show instructions.The specific instruction is shown in the ¶.(In this example, the symbol instructs that the plug be disconnected.)
WARNING
CAUTION
Beware of Electric Hazard
Disassembly Prohibited
Disconnect Plug
4
CONTENTS1. WARNING ........................................ 5
2. PRECATION ..................................... 7
3. INSTALLING THE UNIT ........................ 83-1. REMOVING THE PRESS RELEASE
LEVER ........................................................ 83-2. COMPONENT PARTS ............................... 93-3. ATTACHING THE PARTS ........................ 10
4. NAMES OF THE PARTS ..................... 12
5. NAMES AND FUNCTIONS OF THECONTROL PANEL PARTS PANEL PARTS ................................................ 13
6. PRECAUTIONS BEFORE USE ........... 156-1. PAPER TO BE USED ............................... 156-2. PRECAUTIONS FOR STACKING
PAPER ...................................................... 16
6-3. GENERAL PRECAUTIONS ...................... 18
7. OPERATION PROCEDURES.............. 197-1. FIXED FOLDING OF FIXED PAPER ....... 197-2. Folding Thick Paper .................................. 25
7-3. Double Folding Thick Paper ..................... 267-4. SPECIAL FOLDING OF FIXED PAPER ... 297-5. Calling the Registration ............................. 347-6. SWITCHING THE MODE USED. ............. 34
8. FOLDING ADJUSTMENTS ANDREGISTERING CORRECTIONS ......... 368-1. ADJUSTING THE FOLDING SLIPPAGE
IN THE VERTICAL DIRECTION ............... 368-2. REGISTERING THE FOLDING STOPPER
CORRECTION .......................................... 388-3. ADJUSTING THE FOLDING SLIPPAGE IN
THE HORIZONTAL DIRECTION .............. 40
9. USING ART/COATED PAPER ............ 419-1. PRECAUTIONS FOR STACKING
PAPER ...................................................... 419-2. OPERATING PRECAUTIONS .................. 42
10.USING NON-FIXED PAPER................ 4410-1. FIXED FOLDING PROCEDURE .............. 4410-2. SPECIAL FOLDING PROCEDURES ....... 46
11.CROSS FOLDING ............................... 5111-1. PRECAUTIONS UPON USE .................... 5111-2. CROSS FOLDING FIXED PAPER ........... 5211-3. CROSS FOLDING UN-FIXED PAPER ..... 54
12.TROUBLESHOOTING......................... 5712-1. PAPER HAS JAMMED NEAR THE PAPER
FEED RING .............................................. 5712-2. PAPER HAS SLIPPED NEAR THE PAPER
FEED SECTION ....................................... 5812-3. PAPER HAS COILED AROUND THE
RUBBER ROLL INSIDE THE UNIT .......... 5812-4. PAPER HAS JAMMED AT THE FIRST
FOLDING PLATE ..................................... 5912-5. PAPER HAS JAMMED AT THE SECOND
FOLDING PLATE ..................................... 60
12-6. PAPER HAS JAMMED NEAR THESTACKER ................................................. 62
13.EMERGENCY STOPS......................... 63
14.ERROR MESSAGES ........................... 64
15.TROUBLE SHOOTING GUIDE ........... 66
16.Cleaning the Unit ................................ 6916-1. Cleaning the Rubber Roll .......................... 6916-2. Cleaning the Paper Feed Ring ................. 70
17.Specifications ..................................... 71
5
1. WARNING1 Use only the power supply voltage displayed.
AC230V
Voltages Other than 230V Prohibited
Disconnect Plug
Prohibited
Prohibited
Prohibited
Prohibited
Check Capacity
2 Ensure that the total current of all the units connected to the wall outlet does notexceed power supply capacity.When using the extension cord, ensure that the total current of all the units con-nected to this extension cord does not exceed the specification of the extensioncord.If it exceeds the specified current or power supply capacity, fire hazards may result.
3 Do not scratch, damage, or remodel the power cord.Do not place heavy objects on the power cord, nor pull or bend it.Or the power cord will damage and cause fire and electric hazards.
6 Disconnect the power plug from the outlet by pulling the plug instead of the powercord.Pulling the power cord will damage the power cord and cause fire and electric haz-ards.
7 If the power plug or cord becomes abnormally hot, first turn off the power switchand disconnect the power plug from the outlet.If used continuously in this state, fire and electrical hazards may result. Contactyour dealer.
4 Do not bind up the power cord even if it is too long, or this will cause poor heatemission and fire hazards as a result.
5 Do not touch the power plug with wet hands, or electric hazards may result.
+ 6%–10%
6
1. WARNING
8 When not using the product for a long period of time due to vacations, etc., be sureto disconnect the power plug from the outlet. If it malfunctions, fire hazards causedby power leakage may result.
Disconnect Plug
9 Remove dusts on the blades of the power plug and the surface from which theblades extend with a dry cloth. The dusts attached may cause fire hazards.
Wipe Plug
10 If the device is abnormally hot, emitting smoke or an abnormal smell, etc., first turnoff the power switch and disconnect the power plug from the outlet. If the device isused in these states, fire and electrical hazards may result.Contact your dealer immediately.
Disconnect Plug
11 Do not place the device and its power cord near heating equipment and the vents ofheaters, or the covers and power cord coating may melt and cause fire and electri-cal hazards.
Prohibited
12 Do not place the device where people may step on the power cord, or the powercord may damage and cause fire and electrical hazards.
Prohibited
13 Do not remove the covers and rear panels using tools.The inside of the device contains high voltage and mechanism driving parts whichmay cause electrical hazards and injuries.
Disassembly Prohibited
Disassembly Prohibited
14 Do not remodel the device, or fire and electrical hazards may result and cause inju-ries.
Prohibited
15 Before cleaning the device, be sure to disconnect the power plug from the outlet, orthe device may be started accidentally during cleaning and cause injuries.
7
2. PRECATION1 Do not install the product in environments other than those specified, as this will
not only cause the product to rust and malfunction, but will lead to power leakage,fire hazards, and electrical hazards as well.
Temperature : 5 ˚C to 35 ˚C Temperature Change Rate : Below 10 ˚C/h
Humidity : 20%RH to 85%RH Humidity Change Rate : Below 20%/RH/hProhibited
2 Do not install the device where it is very dusty, or it may malfunction.
3 Do not lift up nor tilt the device, or it may turn over and cause injuries.
4 Do not install the device where there are vibrations, or it may move, turn over, andcause injuries.
5 Do not use the device in direct sunlight.
6 Do not place the device on a shaky table or in a tilted position, or it may fall andcause injuries.
7 When moving the device, be sure to disconnect the power plug from the outlet, orthe power cord may damage and cause fire and electrical hazards.
8 Do not use the device where it may be exposed to splashing water droplets andpower leakage occurs easily, or electrical hazards may result.
Prohibited
Prohibited
Prohibited
Prohibited
Prohibited
Prohibited
Disconnect Plug
8
3-1. REMOVING THE PRESS RELEASE LEVER
This press release level is attached to the unit at shipment to prevent the rubber roll frombecoming distorted.Be sure to remove it when installing the unit.
Take note that the unit will be damaged if it is used without removing the lever.
Remember to remove it in the following order when installing the unit.
1 Two press release levers are insertedin the left and right shaft edges of therubber roll.
2 First remove press release lever(A).
• To remove, push inwards and pull out the press
release lever, as shown in the figure.
Also remove that of the operating side in thesame way.
• Next, pull out press release lever(B) as shown in
the figure.
Also remove that of the operating side in thesame way.
3. INSTALLING THE UNIT
<Operating side>Press release lever(B)
Press release lever(A)
Press release lever(B) <Non-operating side>
Press release lever(A)
Press release lever(A)
Press release lever(B)
9
After checking that you have following parts, attach them to the unit.
ó ò
ô
3. INSTALLING THE UNIT
3-2. COMPONENT PARTS
No. Name Qty.ó
ò
1
1
ô
ö
1
1
No. Name Qty.First folding plate
Second folding plate
Cross folding lever
Instruction Manual
ö
DUPLO CORPORATION
Duplo Folder
Please let our service people install the machine.
Instruction Manual
10
1 First, attach the second folding plate.• Before starting, push the lock lever at the side of
the folding plate to “UNLOCK”.
• Next, insert the folding plate into the unit.
• After inserting it properly, push the lock lever to
“LOCK”.
2 Attach the first folding plate in thesame way.
* If the paper jams inside the folding plate, turn off
the power supply, pull out the control cord of the
folding plate, push the lock lever to ''UNLOCK",
and remove the folding plate.
3 After attaching the folding plates,connect the control cord of the firstfolding plate to connector No. 1 andthat for the second folding plate toconnector No. 2.
Note 1: Be sure to insert the control cordscorrectly.
Note 2: Be sure to turn off the power beforeconnecting/disconnecting the controlcords.
3. INSTALLING THE UNIT
3-3. ATTACHING THE PARTS
Second
folding plate
Lock lever
Lock lever
First
folding plate
Stopper
Control cord 1
Control cord 2
11
3. INSTALLING THE UNIT
4 Attach the cross folding lever at itsproper place.
<Parts Used>Cross folding lever .................................................. 1
Note:• The unit has a built-in battery to protect the different types of data registered.
• This battery must be charged when installing the unit for the first time. To charge it, leave the power switch of the unit
on for about five hours.
• The battery will wear out when the unit has been left off continuously for about three months. Therefore turn on the
power occasionally to charge it.
• As data registered and set will be lost when the battery has worn out, be sure to keep a copy of these data.
Cross folding lever
12
4. NAMES OF THE PARTS
Slant correction
paper feed knob
Paper separator pressure
adjusting dial
Paper feed ring
Paper receiving tray
Paper receiving
stopper
Stacker roller
Auxiliary paper
feed plate
Guide
Cross folding leverPaper feed table
Top cove
First folding plate
Control panel
Paper feed pressure
adjusting lever
Second folding plate
Power switch
Paper set lever
Paper feed ring
(For moving)
Rubber roll
Jam correction handle
Set knob
13
No. Name Function
Start/stop button
Test buttonNumber of sheets/paper lengthswitch buttonClear buttonKeypad(0 to 9)Folding modeselection button
Speed controller
First foldingstopper adjustingbutton
Second foldingstopper adjustingbutton
1
2
3
4
5
6
7
8
9
Starts/stops folding.
Each time this button is pressed, start/stop is repeated alternately.
Each time this button is pressed, the unit folds two sheets of paper and stops.
Sets the number of sheets to be folded and switches the input of the paper length.
The paper length input is memorized when it is set.
Press this button to change the number of sheets to be folded and the paper length.
Press these buttons to set the number of sheets to be folded and the paper length.
There are 6 types of fixed folding methods and 2 types of special folding methods
available.
When the power is turned on, the display lamp of the single fold mode will light up.
Each time the button on the right is pressed, the folding mode lamp display switches to
the right.
When the left button is pressed, it switches to the left.
The special folding mode cannot be selected if no special folding method has been
registered.
The processing speed can be changed freely within the range of 45 to 120 sheets/min.
The processing speed increases as the knob is slid to the right and decreases as it is slid
to the left.
When the right button (+) is pressed, the folding stopper moves to the right.
When the left button (–) is pressed, the folding stopper moves to the left.
The stopper moves slightly each time the button is pressed, and continues moving
when pressed continuously until it is released.
When the right button (+) is pressed, the folding stopper moves to the right.
When the left button (–) is pressed, the folding stopper moves to the left.
The stopper moves slightly each time the button is pressed, and continues moving
when pressed continuously until it is released.
1–1 2 3 4 5 60
1
2
1 2
1 2 3 4 5
6 7 8 9 0 C1
12131415
1234567891011
5. NAMES AND FUNCTIONS OF THECONTROL PANEL PARTS PANEL PARTS
14
No. Name FunctionSpecial foldingregistration button
Fixed foldingcorrection button
Number of sheets/paper lengthdisplay window
Paper size displaywindow
Fixed foldingdisplay windowSpecial foldingregistrationdisplay lamp
:
A
B
C
D
E
5. NAMES AND FUNCTIONS OF THE CONTROL PANEL PARTS
This button is used to memorize the stopping position of the folding stopper, stacker,
etc. when moved in special folding modes such as cross folding and non-fixed folding
modes, etc.
Up to two registration methods can be memorized. Once memorized, the registered
data is preserved even after the power is turned off.
To erase the registered data, keep pressing the corresponding registration button (1) or
(2) until the buzzer sounds.
This button is used to register the correction value when the folding stopper is adjusted
finely in the fixed folding mode.
Up to 36 types (No. of fixed folding modes x paper type) of correction values can be
registered.
To erase the registration, select the folding mode of the corresponding paper size to be
delected and continue pressing this button until the buzzer sounds.
This window displays the number of processed sheets (counter), the values input for
paper length, error messages, etc.
This window displays the size of paper placed on the paper feed table which is
automatically determined (fixed sizes of A3 to B6).
Also displays the operation state “ O . P” when the paper length is input.
This window displays six types of fixed folding modes.
The display lamp blinks when a mode registered for folding correction is selected.
This lamp lights up when the special folding mode is set.
This mode cannot be selected if no special folding method has been registered.
15
• Straighten folded or curled paper before use.
• Make sure that the ink on the paper has dried up properly
before use.
If the ink has not dried properly, it may dirty the
machine, and cause other problems such as dirtying the
folded surface with ink, etc.
6. PRECAUTIONS BEFORE USE6-1. PAPER TO BE USED
16
6. PRECAUTIONS BEFORE USE
6-2. PRECAUTIONS FOR STACKING PAPER
• If the paper is not stacked neatly on the paper feed table,
the unit will not be able to read the size of the paper
accurately and as a result, may determine the paper as
outside the standard size. Therefore, be sure to stack the
paper neatly.
The paper feed table has a built-in device for readingpaper size.Take note that this device will not be able to read thepaper size correctly if the paper is stacked unevenly.This may as a result cause problems.
• Automatic paper size detection can be carried out for
paper up to ±2.5 mm of the fixed paper.
• If the paper is not stacked properly lengthwise, mis-feed
or chain feed may occur.
• When stacking just a few sheets of paper on the paper
feed table, lower the paper set lever while pressing the
back edge of the paper.
PaperGuide plate
Paper set lever
17
6. PRECAUTIONS BEFORE USE
• Adjust so that the front part of the paper touches the
paper feed ring in front lightly. (Arrow)
• The paper will be folded as shown in the figure if placed
with the printed surface up on the paper feed table.
• For “accordion fold” and “irregular accordion fold”, the
printed surface of some paper will be folded outwards.
Paper
Paper feed
rings
Single fold Brochure foldAccordion foldLetter foldIrregular
accordion foldDouble fold
18
6-3. GENERAL PRECAUTIONS
6. PRECAUTIONS BEFORE USE
1 Occasionally make sure that thepower plug is not abnormally hot.
If the power plug is abnormally hot, contactyour nearest dealer.
2 Make sure that the power cord is notfrayed nor scratched.
3 Connect the power plug to theelectrical outlet properly upon use.
4 When not using the unit over a longperiod of time, turn on its poweroccasionally.The unit has a built-in battery to protect the different
types of data registered.
• The battery is used when the power of the unit is
off. (It will be used even if there is nothing
registered.) It is charged when the power is on.
• As the data registered and set will be lost when the
battery has worn out, be sure to keep a copy of it.
• The battery will wear out when the unit has been
left off continuously for about three months. Turn
on the power occasionally to charge it.
19
1 Insert the power cord in the electricaloutlet and turn on the power.
• Press “I” to turn on the power.
• Press “O” to turn off the power.
The folding stoppers and stacker rollers on thefolding plates will move to their initial settingpositions when the power is turned on. Waitfor a few seconds for this to complete which isindicated by the sound of the buzzer.
2 Raise the paper set lever and placesome paper on the paper feed table.
• Loosen the fixing screws of the guide, and move
the guide slightly more than the width of the paper.
• Loosen the paper and stack sheets of paper neatly
on the paper feed table.
• Insert the paper until its front part touches the front
guide plate lightly.
3 After pressing the guide to the side ofthe paper lightly, tighten the screwsto secure the guide.
• The left and right guides move in the same
direction.
Paper can be stacked to a height ofapproximately 45 mm at one time. Do notstack too many sheets paper.
4 Lower the paper set lever.
Start the various fixed folding operations for fixed paper as follows.
7. OPERATION PROCEDURES7-1. FIXED FOLDING OF FIXED PAPER
Power switch
Paper
Fixing screw
Paper set lever
Guide Fixingscrew
Guides Fixing screw
Fixing screw
Guides
Paper set lever
20
7. OPERATION PROCEDURES
5 Press the “fold mode selection”button and select the desired foldmode.
• When the right “folding mode selection” button is
pressed, the lamp on the right of that currently lit
will light up.
• When the left one is pressed, the lamp on the left of
that currently lit will light up.
• If “special folding” had been registered previously,
“special folding” modes 1 and 2 can be selected by
pressing these “folding mode selection” buttons. If
no special folding methods have been registered,
the special folding mode cannot be selected and
instead the fixed folding mode will be set.
6 Check the paper size display.
• When paper outside the fixed size is used, the size
of the paper will not be detected automatically and
consequently not displayed.
When using such a kind of paper, refer to“Using Non-Fixed Paper” on page 44.
21
7 Adjust the paper feed pressureadjusting lever to “0”.
• If the paper slips and no paper is fed, raise the
paper feed pressure one level from 0 to 1.
• If several sheets of paper are fed at one time, lower
the paper feed pressure one level from 0 to –1.
When using art paper or coated paper, refer to“Using Art /Coated Paper” on page 41.
8 Open the Top cover and adjust theseparator pressure adjusting dial to“0”.
• If several sheets of paper are fed at one time, raise
the separator pressure dial from 0 to 1 or 2.
• Adjust the separator pressure by gradually
increasing the level 0.5 each time.
When using art paper or coated paper, refer to“Using Art /Coated Paper” on page 41.
9 Close the Top cover and adjust thespeed controller as desired.
7. OPERATION PROCEDURES
Paper feed pressure adjusting lever
Separator pressure adjusting dial
22
7. OPERATION PROCEDURES
10 Press the “test” button and performtest folding.
• Two sheets of paper will be folded.
Even after two folded sheets of paper havebeen ejected, the machine will not stopworking when the stop button is pressed untilthe buzzer sounds and the motor inside stopscompletely.The unit will not respond to whatever buttonon the control panel is pressed.
• The paper will be folded properly if it is folded
after it has reached the stopper inside the folding
plate.
• If the paper flowing into the folding plate is folded
without reaching the stopper due to conditions
such as environmental conditions (temperature,
humidity), paper quantity, its type, paper couch
conditions, folding speed, curling etc., it may not
be folded properly.
• In some cases, the paper may also coil around the
rubber roll and cause problems.
• As such problems can be corrected by decreasing
the folding speed, keep decreasing the speed until
the paper is folded properly.
23
7. OPERATION PROCEDURES
11 Check the folded paper for testing.
• Proceed onto the next step if the sheets of paper
have been folded satisfactorily.
Check the second ejected paper to confirmthat folding is performed correctly.
• If the sheets of paper have not been folded
satisfactorily, refer to the following steps.
óIf folding has slipped in the vertical direction:
Press the “folding stopper adjustment” button and
adjust the folding slippage.
Refer to “Adjusting the folding slippage in the
vertical direction” on page 36.
òIf the folding has slipped in the horizontal direction:
Rotate the “slant correction knob” and adjust the
folding slippage.
Refer to “Adjusting the folding slippage in the
horizontal direction” on page 40.
Check the folding slippage in the horizontaldirection with the second sheet of test foldsample.
12 Perform test folding again and makesure that there is no slippage.
• To register the corrected stopper position, refer to
“Registering the Folding Stopper Correction” on
page 38.
Even if the paper of one size is used, foldingslippage in the vertical direction may occurbecause of the kind of paper used, the paperthickness, processing speed.It is therefore necessary to adjust the foldingstopper slightly.
Paper for testing folding
Slant correction knob
24
7. OPERATION PROCEDURES
13 Input the number of sheets to be foldedon the keypad.
• Press the numerical key buttons and input/set the
number of sheets to be processed.
• When this is input, the counter drops.
• If this is not input, the counter increases.
14 After completing all preparations,start operation.
• Press the “start/stop” button.
15 The unit stops automatically when ithas reached the number of sheets tobe processed.
• It also stops automatically if there is not more
paper on the paper feed table.
16 To interrupt or to stop operation,press the “start/stop” button again.
25
7-2. FOLDING THICK PAPER
7. OPERATION PROCEDURES
When folding into two cardboard paperand fine quality thick paper (157 g/m 2), thecorners and center of the folded part of thepaper may bend due to conditions such asthe using environment (terperature,humidity), paper size, fiber direction of thepaper, etc. This is not a malfunction of themachine.Should the paper bend as above, performthe following steps.
1 Press the + side of the FOLDINGPLATE 2 button several times (3 to 5times) and move the folding stopperof folding plate 2.
2 Press the START/STOP button andstart folding operations.Should the paper bend again duringfolding, press the START/STOPbutton and stop the machine. When ithas stopped completely, press the +side of the FOLDING PLATE 2 buttontwice and start folding operationsagain.
3 Af te r comp le t i ng t he f o l d i ngoperations, turn off the POWERswitch.
Note :If thin paper is folded with the folding stopper offolding plate 2 moved to fold thick paper, the thinpaper will not be folded properly. Therefore aftercompleting folding operations for thick paper, alwaysturn off the power once.
4 Perform steps 1 to 3 only for folding athick paper into two.Paper can be folded into more thantwo parts (Inner triple-folding, etc.)properly using the normal procedure.
Corner
Center of folded part
POWER switch
26
7-3. DOUBLE FOLDING THICK PAPER
7. OPERATION PROCEDURES
• When thick paper (above 105 g/u) such as fine
quality paper, etc. is folded into fours, its thickness
may cause its folds to open when it is ejected to the
stacker. As a result, the paper will not be able to
pass through the stacker rolls and paper jam will
occur.
Note : Take note that paper below B6 size(157 g/m2) cannot be ejected if foldedinto fours.
• In this case, proceed in the following steps.
óPlace the paper on the paper feed table, lower the
paper set lever and raise the paper feed table.
òWhile pressing the “clear” button, press numerical
key “5” or “6” and move the stacker roll manually.
ôAdjust so that the stacker rolls are above the belt.
Paper
Paper set lever
Lever Stacker rollers
Stacker lever
Lever
Belts
27
• While lifting up the stacker rolls with your hand,
pull the levers (left and right) attached to the
stacker lever in the direction of the arrow, and
adjust so that the stacker rolls are above the belt.
öSet the folding mode to “Double fold”.
õPress the “test” button and test the folding.
Check if the paper is ejected smoothly.
úIf the paper is not ejected smoothly, change the
position of the stacker rolls.
While pressing the “clear” button, press any
numerical key between “3” and “6” and adjust the
stacker rolls to the best position.
7. OPERATION PROCEDURES
Stacer lever
Belt
Stacer roller
Lever
28
ùIf there is folding slippage, adjust the stopping
position of the folding stopper with the adjusting
button of folding plate 1 or 2.
ûAfter completing all adjustments, press “special
folding” registration 1 or 2 and register this special
folding method.
Note : If a special folding method had beenregistered before, registering the newmethod wi l l e rase the prev iousregistration data.
üPress the numerical buttons and input and set the
number of sheets to be folded.
†Press the “start/stop” button and begin folding
operations.
7. OPERATION PROCEDURES
29
7. OPERATION PROCEDURES
7-4. SPECIAL FOLDING OF FIXED PAPER
Start special folding operations for fixed paper as follows.
1 Stack some paper on the paper feedtable.
2 Fold the paper as desired andmeasure the folded paper. Adjust theposition of the folding stopper of thefolding plate accordingly.
• The figure on the right shows an example of an
accordion fold.
°After the operations have completed, be sure to
lower the left and right levers attached to the
stacker lever in the direction of the arrow.
If the stacker rolls are left lifted up, problems will
occur when “folding mode” is executed with the
usual paper quantity.
Stacker rollers Lever
Stacker lever
Belts
Paper
Paper set lever
Accordion fold
30
7. OPERATION PROCEDURES
3 For measurement A, press the“folding plate 1” adjusting button andmove the folding stopper of the firstfolding plate to the correspondingposition.
• For measurement B, press the “folding plate 2”
adjusting button and move the folding stopper of
the second folding plate to the corresponding
position.
• When carrying out special folding, folding sizes
should be within the following ranges.
Folding range (A) for first folding plate:
38mm to 325 mm
Folding range (B) for second folding plate:
40mm to 216mm
Max. paper length when folded (C):
216mm
4 Next fix the stopping position of thestacker rollers.
• Press the (1 to 7) on the keypad with the clear
button held down and move the stacker rollers.
• The stopping position of the stacker rollers
depends on the length of the paper fold.
Refer to the following table “Stacker Roller
Positions” when pressing the keyson the keypad.
Stacker roller
31
7. OPERATION PROCEDURES
Number Length of Paper Fold Folding Mode
B6: Single Fold, Double Fold, Letter Fold, Accordion Fold, IrregularAccordion Fold, Letter Fold
A5: Double Fold, Letter Fold, Accordion FoldB5: Double Fold, Letter Fold, Accordion FoldA4: Double FoldB4: Double Fold
A5: Single Fold, Irregular Accordion Fold, Brochure FoldA4: Letter Fold, Accordion FoldA3: Double Fold
B5: Single Fold, Irregular Accordion Fold, Brochure FoldB4: Letter Fold, Accordion Fold
A4: Single Fold, Irregular Accordion Fold, Brochure FoldA3: Letter Fold, Accordion Fold
B4: Single Fold, Irregular Accordion Fold, Brochure Fold
A3: Single Fold, Irregular Accordion Fold, Brochure Fold
Bigger than A3, Single Fold
40—91 mm
91—105 mm
105—128.5 mm
128.5—148.5 mm
148.5—182 mm
182—210 mm
210—216 mm
1
2
3
4
5
6
7
5 Next, press the “special folding”reg is t ra t ion bu t ton 1 o r 2 totemporarily register it.
• The “special folding” display lamp 1 or 2 lights up.
Up to two types of special folding can beregistered.
6 Press the “test” button and carry outtest folding.
• Check the fold of the paper.
32
7. OPERATION PROCEDURES
7 If there is folding slippage, adjust thestopping position of the foldingstopper.
• Press either the “folding plate 1” or “folding plate
2” button to adjust the stopping position of the
folding stopper.
8 If the paper is not ejected smoothly,adjust the stopping position of thestacker rollers properly.
• Press the keys on the keypad to adjust the stopping
position of the stacker rollers with the clear button
held down.
9 Press the “test” button and checkhow the papers are ejected.
33
7. OPERATION PROCEDURES
Once the values have been registered, theywill be kept even after the power is turned off.
To erase the registration ó Select “special folding” display lamp 1 or 2 that is tobe erased with the “ folding mode selection” button.
ò Next, press the “special folding registration” buttonuntil the buzzer sounds.
The “special folding” display lamps turns off,indicating that the registration has been erased.
10 After completing all adjustments,press “special folding” registration 1or 2 button.
• When registration button 1 is pressed, the folding
method will be registered in special folding mode
1.
• When registration button 2 is pressed, the felding
made it will be registered in special folding mode
2.
• This completes the registration of special folding.
• When a new special folding method is registered,
the data previously registered will be erased.
11 Press the keys on the keypad to inputt h e n u m b e r o f s h e e t s t o b eprocessed.
• Next, proceed onto “Operation Procedures” on
page 19.
34
7. OPERATION PROCEDURES
7-5. CALLING THE REGISTRATION
• When folding is to be carried out using the data
that was registered during the special folding
process, press the “folding mode selection” button
and select the registered special folding mode,
1 or 2.
• If no registrations had been made previously, the
special folding mode cannot be selected.
• The special folding mode cannot be selected even
if “special folding” registration button 1 or 2 is
pressed.
• In “special folding” registration, the positions of
the folding stopper (folding plate 1 or 2) and the
stacker rolls can be memorized.
7-6. SWITCHING THE MODE USED
1 Switching from fixed to non-fixedpaper
óPress the “Number of sheets/paper length” button
and switch to the mode for non-fixed paper (length
input mode).
• If measurements had been registered previously,
these will be displayed on the display window.
35
7. OPERATION PROCEDURES
2 Precaut ions For Select ing TheFolding Mode
• If non-fixed paper of 137 to 157 mm is used, it
cannot be folded in the double fold, irregular
accordion fold, and brochure fold styles.
òMeasure the length of the paper to be used, and
input its length using the numerical keys.
• If the measurements previously registered and
currently being displayed are not to be used, press
the “clear” button, erase these measurements, and
input the desired measurements.
Note : Take note that desired measurementscannot be input i f the prev iousmeasurements registered have not beenerased.When new measurements are input, theregistration of the fixed folding correctionusing the previous measurements will beerased.
• When the measurements being displayed are to be
used, there is no need to input the measurements
again.
ôContinue pressing the “Number of sheets/paper
length” button until the buzzer sounds.
• The display changes to the paper length folding
mode, indicating that operations can be started.
• When non-fixed paper is to be used, the unit cannot
be operated until the paper size display window
shows “LP”.
137 to 157mm
Irregular
accordion foldDouble fold Brochure fold
36
8. FOLDING ADJUSTMENTS AND REGISTERING CORRECTIONS8-1. ADJUSTING THE FOLDING SLIPPAGE IN THE VERTICAL DIRECTION
To adjust the folding slippage in the vertical direction, press the “folding stopperadjusting” button.
Folding Style Fold Surface A Adjustment
Press the left button
Press the right button
Press the left button
Press the right button
Press the right button
Press the left button
Press the left button
Press the right button
Press the right button
Press the left button
Press the left button
Folding Plate 1Adjusting Button
Single Fold
Double Fold
Letter Fold
Accordion Fold
Brochure Fold
IrregularAccordion Fold
When A
is longer
When Ais shorter
When Ais longer
When Ais shorter
When A
is longer
When Ais shorter
When Ais longer
When Ais shorter
When Ais longer
When Ais shorter
When Ais longer
When Ais shorter
Press the right button
37
Folding Style Fold Surface B Adjustment Folding Plate 2Adjusting Button
Press the left button
Press the right button
Press the left button
Press the right button
Press the right button
Press the left button
Press the right button
Press the left button
Press the right button
Double Fold
Letter Fold
Accordion Fold
Brochure Fold
IrregularAccordion Fold
When Bis longer
When Bis shorter
When B
is longer
When Bis shorter
When Bis longer
When Bis shorter
When Bis longer
When Bis shorter
When Bis longer
When Bis shorter
Press the left button
8. FOLDING ADJUSTMENTS AND REGISTERING CORRECTIONS
38
8-2. REGISTERING THE FOLDING STOPPER CORRECTION
1 Specify the folding mode.
2 Perform test folding.
3 Press the “folding stopper adjusting”button to adjust the folding slippage.
8. FOLDING ADJUSTMENTS AND REGISTERING CORRECTIONS
(1) Use this correction registration function to memorize the position of the foldingstopper after adjusting the folding slippage in the vertical direction.
(2) This function is extremely useful when folding the same type of paper (size, type,thickness) at the same folding speed.
(3) Corrections can be registered in every folding mode.Up to 36 types of correction registrations are possible. However, take note thatcorrections cannot be registered in the special folding mode. (This will onlyregister the special folding method again.)
39
4 After adjusting folding slippage,continue pressing the “fixed foldingcorrection” button until the buzzer(pi, pi, pi) sounds.
• When the value of the folding stopper correction is
registered, the display lamp of the specified
folding mode will start blinking.
Once the value of the folding stoppercorrection is registered, it will be kept evenafter the power is turned off.
8. FOLDING ADJUSTMENTS AND REGISTERING CORRECTIONS
To change the correctionvalue
• Carry out the procedure for registering corrections.
To erase the registration • Continue pressing the “fixed folding correction”button until the buzzer sounds pi, pi, pi and changesto pi.... (takes about 5 seconds).
• When the registration is erased, the fixed foldingdisplay lamp stops blinking.
40
8-3. ADJUSTING THE FOLDING SLIPPAGE IN THE HORIZONTAL DIRECTION
8. FOLDING ADJUSTMENTS AND REGISTERING CORRECTIONS
• If folding slips as shown in the figure because the
paper is not cut straight, rotate the “slant
correction” knob to adjust the folding slippage.
1 Rotate the “slant correction” knob toadjust the folding slippage.
• If folding slippage is as shown in Fig. A, rotate the
knob in the direction of the arrow.
• If folding slippage is as shown in Fig. B, rotate the
knob in the direction of the arrow.
2 After using, be sure to rotate the“slant correction” knob to adjust theround holes of the paper feed table tothe pin.
• The position at which the round hole meets the pin
is the standard position.
Slant correction knob
Slant correction knob
Slant correction knob
Slant correction knob
Round
hplePin
41
9. USING ART/COATED PAPER• Art/coated paper are difficult to fold as their printed surfaces tend to stick together
easily and cause double feeding.• When folding such a kind of paper, observe the following precautions before starting
folding operations.
1 Loosen the paper thoroughly.
2 Next arrange the paper neatly andstack them on the paper feed table.
3 For other precautions, refer to“Precautions for Stacking Paper” onpage 16.
9-1. PRECAUTIONS FOR STACKING PAPER
Paper
Paper set lever
42
9-2. OPERATING PRECAUTIONS
1 If double-feed occurs frequently andcannot be corrected, reduce theamount of paper on the paper feedtable until the middle of the guide(approx. 25mm)
As the specific gravity of this type of paper ishigher than that of normal paper, they tend tostick together, causing double-feeding tooccur frequently.The amount of paper loaded on the table istherefore reduced.
2 Adjust the paper feed pressureadjusting lever to “3”.
• If the paper slips, gradually raise the paper feed
pressure one level at a time , from “3” to “4”, until
the appropriate paper feed pressure is obtained.
• When the paper slips, the display shows “-¡-”
and the unit will stop. Raise the paper feed pressure
one level when the unit stops.
Set the paper feed pressure within the rangeof 3 to 5.
3 Next, open the top cover and adjustthe separator pressure.
• Set the separator pressure adjusting dial to “2.5”.
• If the paper sticks and several sheets of paper are
fed at one time (double feeding), gradually raise
the separator pressure adjusting dial 0.5 at a time
until the appropriate separator pressure is obtained.
Set the separator pressure within the range of2.5 to 3.5.
• The separator pressure may have to be set to 3.5 or
above if the paper feed ring or paper separator, etc.
is worn out.
But try to set the pressure at the lowest level
possible.
9. USING ART/COATED PAPER
Paper
25m
m
Guide
Paper feed pressure adjusting lever
Separator pressure adjusting dial
43
9. USING ART/COATED PAPER
4 If the paper is not folded properly,adjust the speed control to a slowerspeed.
When paper is folded at a high speed, as thefront edges of the paper cannot reach thefolding stopper due to various conditions suchas environmental conditions (temperature,humidity), paper size, thickness of paper,paper couch conditions, and printed surfaceconditions, etc., the paper is not foldedproperly.
5 From here, carry out the usualprocedures.
• Refer to “Operation Procedures” on page 19.
44
9-1. Ł ‘ Ł g p Ł
10. USING NON-FIXED PAPER10-1. FIXED FOLDING PROCEDURE
Start fixed folding operations for non-fixed paper according to the following procedure.
1 Press the “Number of sheets/paperlength” button and set the paperlength input mode.
• When the paper length input mode is set, the
“paper size” and “Number of sheets/paper length”
display windows will display as shown in the
figure.
Take note that when non-fixed paper is usedin modes normally used, the paper sizeautomatic detection function operates and theunit will stop.
2 Next, measure the length of the paperto be used, and input the length onthe keypad.
• Paper lengths that can be input range from
minimum 135mm to maximum 432mm.
• Use measuring instruments which are in mm.
• To input 135, press numerical button [1] [3] and
then [5].
• To input 432mm, press numerical buttons [4],[3],
and then [2].
When using paper which are 135mm to 152mm long, the folding modes-double folding,irregular accordion folding, brochure folding,etc.-cannot be selected as such paper are toobig for the folding plate to fold them into thesestyles.
If the paper length has already beenregistered, press the “clear” button to erasethe value registered first before inputting.
45
10. USING NON-FIXED PAPER
3 Register the paper length input.
• Continue pressing the “Number of sheets/paper
length” button until the buzzer sounds.
• The “paper size” and “Number of sheets/paper
length” display windows will switch to the paper
length folding mode display shown in the figure.
The paper length registered will be kept evenafter the power is turned off.
4 Press the keys on the keypad to inputt h e n u m b e r o f s h e e t s t o b eprocessed.
• From here, carry out the usual procedures.
Refer to “Operation Procedures” on page 19.
5 When using fixed paper again, pressthe “Number of sheets/paper length”button.
• The normal operation mode will be set.
Folding stopper corrections can be registered in the paper length folding mode as well. (As well as the six typesof fixed folding modes). However, take note that if the paper length is changed, the previous correction valuememorized will be erased.
46
10-2. SPECIAL FOLDING PROCEDURES
1 Press the “Number of sheets/paperlength” button and set the paperlength input mode.
• When the paper length input mode is set, the
“paper size” and “Number of sheets/paper length”
display windows will display as shown in the
figure.
Take note that when non-fixed paper is usedin modes normally used, the paper sizeautomatic detection function operates and theunit will stop.
2 Next, measure the length of the paperto be used, and input the length onthe keypad.
• Paper lengths that can be input range from
minimum 135mm to maximum 432mm.
• Use measuring instruments which are in mm.
I f the paper length has already beenregistered, press the “clear” button to erasethe value registered first before inputting.
3 Register the paper length input.
• Continue pressing the “Number of sheets/paper
length” button until the buzzer sounds.
• The “paper size” and “Number of sheets/paper
length” display windows will switch to the paper
length folding mode shown in the figure.
4 Stack some sheets of paper on thepaper feed table.
10. USING NON-FIXED PAPER
Paper
Paper set lever
47
5 Fold the paper as desired andmeasure the folded paper. Adjust theposition of the folding stopper of thefolding plate accordingly.
• The figure on the right shows an example of an
accordion fold.
• For measurement A, press the “folding plate 1”
adjusting button and move the folding stopper of
the first folding plate to the corresponding
position.
• For measurement B, press the “folding plate 2”
adjusting button and move the folding stopper of
the second folding plate to the corresponding
position.
• When carrying out special folding, folding sizes
should be within the following ranges.
Folding range (A) for first folding plate:
40 to 325mm
Folding range (B) for second folding plate:
40 to 216mm
Max. paper length when folded (C): 216mm
6 Next fix the stopping position of thestacker rollers.
• Press the keys (1 to 7) on the keypad to move the
stacker rollers with the clean button held down.
10. USING NON-FIXED PAPER
Accordion fold
48
• The stopping position of the stacker rollers
depends on the length of the paper fold.
Refer to the following table “Stacker Roller
Positions” when pressing the keys on the keypad.
10. USING NON-FIXED PAPER
Number Length of Paper Fold Folding Mode
B6: Single Fold, Double Fold, Letter Fold, Accordion Fold, IrregularAccordion Fold, Letter Fold
A5: Double Fold, Letter Fold, Accordion FoldB5: Double Fold, Letter Fold, Accordion FoldA4: Double FoldB4: Double Fold
A5: Single Fold, Irregular Accordion Fold, Brochure FoldA4: Letter Fold, Accordion FoldA3: Double Fold
B5: Single Fold, Irregular Accordion Fold, Brochure FoldB4: Letter Fold, Accordion Fold
A4: Single Fold, Irregular Accordion Fold, Brochure Fold
A3: Letter Fold, Accordion Fold
B4: Single Fold, Irregular Accordion Fold, Brochure Fold
A3: Single Fold, Irregular Accordion Fold, Brochure Fold
Bigger than A3: Single Fold
40—91 mm
91—105 mm
105—128.5 mm
128.5—148.5 mm
148.5—182 mm
182—210 mm
210—216 mm
1
2
3
4
5
6
7
7 Next , p ress “spec ia l fo ld ing”reg is t ra t ion bu t ton 1 o r 2 totemporarily register it.
• The “special folding” display lamp 1 or 2 lights up.
Up to two types of special folding can beregistered.
Stacker roller
49
8 Press the “test” button and carry outtest folding.
• Check the fold of the paper.
9 If there is folding slippage, adjust thestopping position of the foldingstopper.
• Press either the “folding plate 1” or “folding plate
2” adjusting button to adjust the stopping position
of the folding stopper.
10 If the paper is not ejected smoothly,adjust the stopping position of thestacker rollers.
• Press the keys on the keypad to adjust the stopping
position of the stacker rollers with the clear button
held down.
11 Press the “test” button to check howthe papers are ejected.
10. USING NON-FIXED PAPER
50
12 After completing all adjustments,continue pressing “special folding”registration 1 or 2 button until thebuzzer (pi, pi, pi) sounds.
• This completes the registration of special folding.
Once the values have been registered, they will be
kept even after the power is turned off.
13 Press the keys on the keypad to inputt h e n u m b e r o f s h e e t s t o b eprocessed.
14 From here, carry out the usualprocedures.
Refer to “Operation Procedures” on page 19.
10. USING NON-FIXED PAPER
• To Cancel the Registration
Continue pressing “special folding” registration 1 or 2
button until the buzzer sounds pi, pi, pi and changes to
pi.... (takes about 5 seconds).
51
• As shown in the figure, cross foldingmeans folding paper already folded intotwo parts into twos again, threes, or inother ways.
• Paper can be cross folded into variousshapes depending on use.
(2) When the paper is cross folded, ∑shape folding, folding slippage in thehorizontal direction may occur due toconditions such as environmentalconditions (temperature, humidity),paper thickness, paper size, type ofpaper, paper couch condit ions.Therefore do not suspect a fault.
(1) The maximum paper thickness is 105 g/m 2. However, this thickness may differ slightlyaccording to various conditions such as environmental conditions (temperature,humidity), paper size, type of paper, paper couch conditions, and printed surfaceconditions.
11-1. PRECAUTIONS UPON USE
Folded Cross single
folding
Cross letter
folding
∑ shape folding
11. CROSS FOLDING
52
11-2. CROSS FOLDING FIXED PAPER
• The following describes the crossfolding shown in the figure and theprocedures for it.
• Start cross folding according to thefollowing procedures.
1 Set the “single fold” mode first andfold the paper into two.
2 Set the single fold paper on the paperfeed table.Face the folded edge of the paper asshown in the figure (back of unit).
• To prevent folding slippage in the horizontal
direction and misfeeding, press the folded edge of
the paper with your hand firmly.
The amount of paper that can be folded isapproximately 2/3 (approx. 36mm) of theheight of the guide at the folded side.
11. CROSS FOLDING
36m
m
Paper
53
3 Open the top cover and move thepaper feed ring at the far end to thefolded edge of the paper.
• Loosen the set screw and move the paper feed ring.
• After moving the paper feed ring, tighten the set
screw properly.
4 Adjust the separator adjusting dial to“0”.
• When double fed occurs, gradually raise the
separator pressure by 0.5 until the appropriate
separator pressure is obtained.
Set the separator pressure to the lowest levelpossible before use.
5 Lower the paper set lever.White pressing the back edges of thepaper.
• Adjust so that the front part of the paper touches
the paper feed ring in front lightly.
6 Close the top cover and adjust thecross folding lever to the guide.
• Place the weight rollers at the tip of the lever on top
of the folded edge.
11. CROSS FOLDING
Paper feed ring(For moving)
Set knob
Separator pressure adjusting dial
Paper
Paper set lever
Cross folding leverTop cover
Weight roller
54
7 Adjust the paper feed pressureadjusting lever to “3”.• When the paper slips or non-feed occurs, raise the
paper feed pressure one level at a time until the
optimum paper feed pressure is obtained.
Set the paper feed pressure within the rangeof 3 to 6.
• When the paper slips and the unit stops, gradually
raise the paper feed pressure one level at a time.
• When the paper slips, the display window shows
[- 1-].
8 From here, refer to “OperationProcedures” on page 19.
• When replenishing paper, raise the cross folding
lever as shown in the figure first.
Cross folding consists of not only the singlefolding of B4, double folding of B5, but theletter folding of B5.
11-3. CROSS FOLDING UN-FIXED PAPER
11. CROSS FOLDING
1 First set the paper length input modeand measure the length of the paper.If the paper length is 360mm forexample, input this value on thekeypad.
R e f e r t o “ 1 0 - 1 . F I X E D F O L D I N GPROCEDURE” on page 44.
2 Register the paper length input.
• Continue pressing the “Number of sheets/paper
length” button until the buzzer sounds.
• The “paper size” and “Number of sheets/paper
length” display windows will switch to the paper
length folding mode display shown in the figure.
Paper feed pressure adjusting lever
Cross folding lever
55
3 Next, set the single fold mode andperform test folding.
• Make sure that the paper has been folded properly.
4 Press the keys on the keypad to inputthe number of sheets to be folded,and start single folding.
If the number of sheets to be folded is 520sheets for example, press the keys on thekeypad to input this value.
5 Face the folded edge of the foldedpaper as shown in the figure and loadit onto the paper feed table.
6 Press the “Clear” button to eraseprevious values.
11. CROSS FOLDING
Paper
Paper set lever
56
7 Measure the length of the paper thathas been folded into two, and inputthis value again.
If the length is 180mm for example, input thisvalue on the keypad.
8 Register the paper length input.
• Continue pressing the “Number of sheets/paper
length” button until the buzzer sound.
• The “paper size” and “Number of sheets/paper
length” display windows will switch to the paper
length folding mode display shown in the figure.
9 Next, set the single folding mode.
10 Press the “test” button to make surethat the paper has been foldedproperly.
11. CROSS FOLDING
57
11 Press the keys on the keypad to inputthe number of sheets to be folded.Next start folding operations.
• Paper will be folded according to the procedures
described above.
For details of other procedures, refer to “Operation
Procedures” on page 19.
When using fixed paper, press the “Number ofsheets/paper length” button.
The normal mode will be set.
12. TROUBLESHOOTING12-1. PAPER HAS JAMMED NEAR THE PAPER FEED RING
1 The “Number of sheets/paper length”display window will show “- lllll-”.
2 Raise the paper set lever and lowerthe paper feed table.Pull the jammed paper towards you.
To cross fold un-fixed paper freely, fold the un-fixed paper into two using fixed folding procedures. Next set thepositions of the folding stopper and stacker rollers by carrying out un-fixed folding of un-fixed paper, registerspecial folding and have the unit record it, and start cross folding. For details, refer to “FIXED-FOLDING OFUN-FIXED PAPER” and “SPECIAL FOLDING OF UN-FIXED PAPER”.
11. CROSS FOLDING
Paper set lever
58
12-2. PAPER HAS SLIPPED NEAR THE PAPER FEED SECTION
12-3. PAPER HAS COILED AROUND THE RUBBER ROLL INSIDE THE UNIT
1 The “Number of sheets/paper length”display window will show “- lllll-”.
2 Increase the paper feed pressure.
• Raise the paper feed pressure adjusting lever one
level at a time.
While observing the paper feed condition.
1 The “Number of sheets/paper length”display window will show “- lllll-”.If the paper has coiled around therubber roll, pull folding plates 1 and 2to the stopper.
2 Open the top cover, and Pull thecoiled paper towards you to remove itwhile rotating the jam correctionhandle.
• If the paper cannot be removed easily, insert a
scale, etc. from between the rubber rolls into the tip
of the paper which has coiled around the lower
rubber roll, and while rotating the jam correction
handle, remove the paper.
12. TROUBLESHOOTING
Jam correction handle
Paper
Rubber roll
Paper feed pressure adjusting lever
59
12-4. PAPER HAS JAMMED AT THE FIRST FOLDING PLATE
1 The “Number of sheets/paper length”display window will show “- lllll-”.
2 Turn off the power and disconnectcontrol cord 1.
Be sure to turn off the power first wheninserting and disconnecting the control cord orthe unit will be damaged.
3 Release the lock of the first foldingplate and remove this plate.
4 Open the top cover and pull thejammed paper towards you toremove.
12. TROUBLESHOOTING
Control cord 1
Lock lever
First
folding plate
60
5 After removing the paper, return thefolding plate and top cover to the unit.
Lock the folding plate and insert control cord 1.
Check that the folding plate has been setcorrectly.Always remove and return folding plates withboth hands.
12. TROUBLESHOOTING
12-5. PAPER HAS JAMMED AT THE SECOND FOLDING PLATE
1 The “Number of sheets/paper length”display window will show “- lllll-”.
2 Turn off the power and disconnectcontrol cord 2.
Be sure to turn off the power first wheninserting and disconnecting the control cord orthe unit will be damaged.
3 Release the lock of the secondfolding plate and remove this plate.
Lock lever
Top cover
First
folding plate
Control cord 2
Second
folding plate
Lock lever
61
12. TROUBLESHOOTING
4 Pull the jammed paper towards you toremove.
5 After completing operations, slide thefolding plate along the slider andreturn it to its original position.
Make sure that the folding plate has been setcorrectly.Always remove and return folding plates withboth hands.
Lock the folding plate and insert control cord 2.
Be sure to turn off the power first when inserting and
disconnecting the control cord.
Slider Control cord 2
Lock lever
Second
folding plate
62
1 The “Number of sheets/paper length”display window will show “- 22222-”.
2 Pull the jammed paper in the stackersection towards you to remove.
12-6. PAPER HAS JAMMED NEAR THE STACKER
12. TROUBLESHOOTING
Paper receiving tray
63
13. EMERGENCY STOPSAn emergency stop device to ensure safety has been, or first folding plates and secondforlding plates installed to the top cover of this unit. Take note that this emergency stopdevice will function as follows.
(1) If the top cover is open while the unitis operating, the “Number of sheets/paper length” display window willshow “ OPEOPEOPEOPEOPE ”, and the unit will stoppromptly.
(2) If the “test” or “start/stop” button arepressed with the top cover open, or iff irst folding plates and secondfolding plates are not promptly set,the “Number of sheets/paper length”display window wil l also show“OPEOPEOPEOPEOPE ” and the unit will not start.
(3) When the top cover is closed or thefirst and second folding plates are setproperly, the unit will be releasedfrom the emergency stop state.
After closing the top cover, press the ''TEST"button and check that the unit operatesproperly.
Top cover
First
folding plate
Second
folding plate
64
14. ERROR MESSAGES• This unit has a self-diagnosing function which will display the following error
messages when problems arise while the unit is operating.• When error messages are displayed, refer to the following countermeasures.
Display Check Correct
No paper on the paper feedtable.
Paper has become stuck at thepaper feed section.
Paper has slipped at the paperfeed section.
Paper has become stuck at therubber roll section or has coiledaround it.
Paper has become stuck at thefolding plate.
Paper has become stuck at thestacker section.
“Err1” is displayed when the“test” or “start/stop” button ispressed.
Paper has become stuck at thestacker section.
“Err2” is displayed when the“test” or “start/stop” button ispressed.
Paper feed table is facing down.
Stacker motor has locked due tooverload.
Load some sheets of paper.
Remove the paper.
Raise the paper feed pressure byone level.
Remove the paper.
Remove the paper.
Remove the paper.
Remove the paper.
Lower the paper set lever and setso that the paper feed table facesup.
Turn off the power and correctthe cause of the lock.
Contact your serviceman.
65
Display Check Correct
14. ERROR MESSAGES
First folding plate motor haslocked due to overload.
Turn off the power and correct thecause of the lock.
Contact your serviceman.
Isn't the control cord for first
folding plate disconnected?Turn OFF the power and insertthe control cord in the connector.
Second folding plate motor haslocked due to overload.
Turn off the power and correct thecause of the lock.
Contact your serviceman.
Isn't the control cord for first
folding plate disconnected?Turn OFF the power and insertthe control cord in the connector.
Top cover is open. Close the top cover.
Isn't first or second folding plateincompletely engaged?
Reset first or second foldingplate in fully engaged position.
Didn't you turn ON the powerwhen the control cord of thefolding plate was disconnected?
• Turn OFF the power.• Turn ON the power after having
connected the control cord tothe connector.
66
15. TROUBLE SHOOTING GUIDEProblem Check Correct
(1) The unit does not start whenthe start button is pressed.
ó Is there paper on the paperfeed plate?
ò Does the paper feed plateface down?
ô Is the paper on the paper feedtable set properly on thepaper switch?
ö Is the paper stuck?
õ Is the top cover open?
û Has problems occurredinside the unit?
• Load some sheets of paper.
• Lower the paper set lever andset the paper feed plate sothat it faces up.
• Set the paper properly.
• Remove the paper.
• Close the top cover.
• Contact your serviceman.
ú Is un-fixed paper used?
ù The paper feed guide is notadjusted properly to the paperwidth.
• Refer to “USING UN-FIXEDPAPER” and input the paperlength.
• Adjust the guide properly tothe paper width.
ü Is the control cord of foldingplate 1 or folding plate 2disconnected?
• Turn off the power and insert thecontrol cord.
ó Has the breaker turned onand cut off the power?
• Press the black button of thebreaker (power returns).
* This breaker cuts off the power temporarily when the motor malfunctionsbecause of paper jams and other problems.Identify the cause, ensure safety and press the black button of the breaker.
ò Is the top cover open? • Close the top cover.
(3) The folding stopper of thefolding plate does not work.
(4) The paper is not folded at theproper folding position.
ó Is the control cord of thefolding plate inserted?
ò Has problems occurredinside the unit?
ó Is the fo ld ing p late setproperly?
ò Environmental conditionssuch as static electricity, etc.may be the cause.
• Inser t the cont ro l cordproperly.
• Contact your serviceman.
• Position the folding plateproperly.
• Lower the folding speed.
• Insert the control cord.
ô Has problems occurredinside the unit?
• Contact your serviceman.
ô Is the control cord of the foldingplate disconnected?
(2) The main motor does notrotate.
67
Problem Check Correct
(6) Paper slips frequently.
(7) Paper jams frequently.
ó Is the paper feed pressure toohigh?
ò Is the separator pressure toolow?
ô Is the paper separator dirty?
ö Are the sheets of paper stickingto each other and cannot beseparated?
õ Is paper outside the specifiedsizes used?
ú Has problems occurred insidethe unit?
ó Is the paper feed pressure toolow?
ò Is the separator pressure toohigh?
ô Is the paper feed ring dirty?
ö Are the sheets of paper stickingto each other and cannot beseparated.
õ Is paper outside the specifiedsizes used?
ú Has problems occurred insidethe unit?
ó Is the rubber roll dirty?
ò Are paper shreds stuck insidet h e p a p e r c o n v e y a n c epassage?
ô The stacker roller position is notcorrect if special folding is beingcarried out.
ö Is the paper curled?
õ Due to static electricity.
(5) Double feed occurs frequently.• Lower the paper feed pressure
gradually until the optimumpressure is obtained.
• Raise the separator pressuregradually until the optimumpressure is obtained.
• Clean with neutral detergent oralcohol.
• Loosen the paper properly andload on the paper feed table.
• Do not use such a kind of paperas they will cause problems.
• Contact your serviceman.
• Raise the separator pressuregradually until the optimumpressure is obtained.
• Lower the separator pressuregradually until the optimumpressure is obtained.
• Clean with neutral detergent oralcohol.
• Loosen the paper properly andload on the paper feed table.
• Do not use such paper as theywill cause problems.
• Contact your serviceman.
• Clean with neutral detergent oralcohol.
• Check inside the unit andremove any paper shreds.
• Re-set the position of thestacker roller.
• Use an anti-static electricityspray available on the market.
15. TROUBLE SHOOTING GUIDE
• Straighten the curl before use.
68
Problem Check Correct
(8) When paper sl ips in thevertical direction.
(9) When paper sl ips in thehorizontal direction.
(10) Paper jam at the rubber rollwhen thick paper or crossfolded thick paper is foldedinto two.
(11) S m a l l p a p e r i s f e dcontinuously.(Double-feed).
ó Was the speed changedhalfway?
ò Was the paper type (quality,amount) changed halfway?
ó I s t h e p a p e r s t a c k e dunevenly?
ò Is there space between thepaper and guide?
ó Is paper outside the specifiedsizes used?
ò Is the space inside theinternal paper conveyancepassage narrow?
ó Is small paper outside thespecified sizes used?
ò Is the paper feed pressuretoo high?
• Adjust each folding stopperfinely.
• Use the original speed.Adjust each folding stopperfinely again.
• Adjust each folding stopperfinely again.
• Stack the paper neatly on thepaper feed table.
• Adjust the guide firmly againstthe paper.
• Rotate the slant correctionknob and correct the foldingslippage.
• Do not use such paper as theywill cause problems.
• Press the folding stopperadjusting button of the secondfolding plate twice and movethe folding stopper to the right.
• Decrease the paper feedpressure by 1 f rom thestandard (0).
• Decrease the folding speeduntil paper feeding stops.
15. TROUBLE SHOOTING GUIDE
• Do not use such a kind ofpaper as they wil l causeproblems.
69
16. CLEANING THE UNIT• As paper shreds, ink of printed paper on the rubber roll and paper feed ring will cause
problems, clean these parts according to the following procedures.• To ensure safety, always turn off the power of the unit first before cleaning.
16-1. CLEANING THE RUBBER ROLL
1 Open the top cover.
2 Disconnect the control cords of thefirst and second folding plates.
3 Push the lock levers of these plates to''UNLOCK", and remove them.
4 Rotate the jam correction handle andthe rubber roll. Clean off the dirt witha cloth moistened with neutraldetergent or alcohol.
Top cover
Control cord 1
Control cord 2
Lock
lever
First
folding plate
Lock
lever
Second
folding plate
Jam correction
handle
Rubber
roll
70
16. CLEANING THE UNIT
16-2. CLEANING THE PAPER FEED RING
1 Open the top cover.
2 While rotating the paper feed ring inthe direction of the arrow with yourhand, clean it with a cloth moistenedwith neutral detergent or alcohol, etc.
Top cover
Paper feed ring
71
17. SPECIFICATIONS
Office use, desktop
297 (W) x 432 (L) mm
128 (W) x 182 (L) mm
Rough paper, fine quality paper, stencil paper, recycled paper,drawing paper, thick paper art/coated paper
Single fold, double fold, irregular accordion fold, letter fold,accordion fold, brochure fold, special cross fold (paper thickness:52.3 to 105g/m2), other special folds
52.3 to 157g/m2, but four-folding cannot be done for A3 up to 128g/m2, and for paper sizes below B6 of 157g/m2
4-figure digital counter display, addition/subtraction systemselectable
Automatic setting
Automatic setting
Top cover open/close detection, paper jam detection at theejection sectionVarious error messages are displayed on the control panel
920 (W) x 490 (D) x 525 (H) mm (MAX)
500 sheets (Fine quality paper, 64g/m2)
45 to 120 sheets/min. (For single folding 64g/m2 of fine quality B4paper)
3 rings, automatic paper separation method, slant correctiondevice
Detection of non-feed, paper jam, etc.
790 (W) x 490 (D) x 525 (H) mm
33 kg
230V • 50Hz
Folding stopper correcting registration function (36 kinds), specialfolding registration function (Max. 2 kinds), Paper length foldingmode
Automatic detection of fixed paper sizes (A3,B4,A4,B5,A5,B6)
Specifications and dimensions are subject to change without prior notice.
Type
Paper size that can befolded
Max.
Min.
Paper quality
Folding mode
Model
Paper thickness
Processing speed
Paper feed method
Loading capacity of paper feed table
Paper size detection function
Mis-feed detection function
Counter
Moving the stacker roller
DimensionsIn storage
Power
Additional functions
Other detections
Moving the folding stopper
In use
Mass
72 96V-92013
top related