deltascope mp10e isoscope dualscopeoperating manual feritscope® mp30e (2.1 - 01/06) page 1...

Operator’s manual

DELTASCOPE® MP10EISOSCOPE® MP10E

DUALSCOPE® MP20E-S RS232 interface

Manual order no. 902-585 Version 2.0 02/2006

DKD-K-33101Certified according to ISO 9001 : 2000

Operating Manual FERITSCOPE® MP30E (2.1 - 01/06) Page 1

Page 2 Operating Manual FERITSCOPE® MP30E (2.1 - 01/06)

� For more detailed information please refer to the operator manual MP10E and MP20E!

Short-Form Operator Manual DELTASCOPE MP10E,

ISOSCOPE MP10E and DUALSCOPE MP20E

®

® ®

ZERO CALNF/Fe NC/NF

milsmm FN

µmMS/m

%

ZERO

CAL

NF/Fe

NC/NF

milsmm FN

µmMS/m

%

Fischer trademark

Normalization is performed

Measurement using the magneticinduction test method is performed

Measurement using the eddy cur-rent test method is performed

Calibration is performed

Restricted operating mode hasbeen selected

"Continuous" display mode hasbeen enabled

Measurement values, errormessages and warnings

Unit of measurement of thedisplayed value

Internal routine is performed

Battery has to be changed orrecharged

Configuration programs have beencalled up

Instrument type

Instrument software version

Symbols and Styles Used

ENTER

ZERO

ON/OFF +

Refers to instrument keys, which have to be pressed

perform Refers to instrument keys or actions, which have to be pressed or performed one

after the other

Refers to instrument keys, which have to be pressed immediately one after the

other (do not keep both keys pressed!)

�

�

Display

��������

������

Performing a Measurement:

ON/OFF

Deleting Measurement Values:

DEL DEL

"Continuous" Display Mode:

Enabling: Disabling

Evaluation (only with MP20E):

FINAL-RES FINAL-RES

ENTER

Normalization:

ZERO

ENTER

Corrective Calibration:

CAL

ENTER

ENTER

ENTER

1. Switch the instrument on:

2. Measuring: Place the probe vertically on the

measuring object

(last value) (all values)

Move the probe over a surface area to deter-

mine the coating thickness distribution.

appears; :

...

(exit the evaluation and delete all

the measurements) or (exit the evaluation

without deleting the measurements)

perform several measurements

on the substrate material

1. perform several measurements on

the substrate material

2. Place standard 1 (foil 1) on the substrate

material perform several measurements

on the standard 1 (foil 1)

3. Set the foil thickness with ,

4. If a 2 point calibration is desired: Place

standard 2 (foil 2) on the substrate mate-

rial perform several measurements on

foil 2 set the foil thickness with , ;

otherwise: after step 3 immediately step 5

5.

�

� � �

� � �

�

�

�

�

�

�

� � �

�

� � �

Measurement and Evaluation:

Normalization / Corrective Calibration:

� For more detailed information please refer to the operator manual MP10E and MP20E!

®

Restricted Operating Mode:

Enabling: ( appears)

Disabling:

ON/OFF + DEL

ON/OFF + ENTER

Configuration

Overview of the Configuration Programs:

10 x ENTER

[ ]157

[ ]159

[ ]FrEE

[ ]FrEE

�

Re-Ini-tiali-

zation

DEL

[ ]30.2 Last measurement value will be displayed;configuration programs have been exited!

Configuration programs are active now!

CAL

MasterCali-

bration

�

Display theRecord of the

InstrumentStatus

� Use and to set the parameters of

the configuration programs; use

to confirm the setting and to

step to the next parameter.

� �

ENTER

�

�

only for MP10E

only for MP20E

© HELMUT FISCHER GMBH+CO.KG Subject to change. 902-586 Version 1.3 - 11/05

H E L M U T F I S C H E R G M B H + C O . K GInstitut für Elektronik und MesstechnikIndustriestrasse 21, 71069 Sindelfingen, GermanyTel.: (0 70 31) 3 03-0, Fax: (0 70 31) 3 03-79E-Mail: mail@helmut-fischer.deInternet: www.helmut-fischer.com

Germanischer LloydCertification

ISO 9001:2000

Certified acc. to

Acoustic Measurement Accept Signal:

Enabling:

Disabling:

ON/OFF +

ON/OFF +

�

�

FINAL-RES

StorageMode*

Switch-OffMode*

2 x �

ENTER

t

t

ZERO

Unit of MeasurementLanguage

Display ModeDisplay ResolutionSwitch-Off Mode

Dual Method*

�

0405

24

- all around the world -GERMANYHELMUT FISCHER GMBH+CO.KGIndustriestraße 21D-71069 Sindelfingen

: (+49) 70 31 303-0Fax: (+49) 70 31 303-79mail@helmut-fischer.dewww.helmut-fischer.com

GREAT BRITAINFISCHER INSTRUMENTATION (G.B.) LTD.Gordleton Industrial ParkHannah Way · PenningtonGB-Lymington/Hants SO41 8JD

: (+44) 15 90 68 41 00Fax: (+44) 15 90 68 41 10mail@fischergb.co.ukwww.fischergb.co.uk

USAFISCHER TECHNOLOGY, INC.750 Marshall Phelps Road Windsor, CT 06095 USA

: (+1) 860 683 07 81Fax: (+1) 860 688 84 96Watts 800 243 84 17info@fischer-technology.comwww.fischer-technology.com

Sole Agent for Helmut Fischer GmbH+Co.KG, Germany:

SWITZERLANDHELMUT FISCHER Elektronik und Messtechnik AGMoosmattstrasse 1 · Postfach · CH-6331 Hünenberg

: (+41) 41 785 08 00 · Fax: (+41) 41 785 08 01switzerland@helmutfischer.comwww.helmut-fischer.com

Branch Offices of Helmut Fischer AG, Switzerland:

SPAINFISCHER INSTRUMENTS, S.A.C/Almogàvers 157 · 3a PlantaE-08018 Barcelona

: (+34) 93 309 79 16Fax: (+34) 93 485 05 94spain@helmutfischer.comwww.helmut-fischer.com

ITALYHELMUT FISCHER S.R.L. Tecnica di Misura Via Columella 40 · I-20128 Milano

: (+39) 0 22 55 26 26Fax: (+39) 0 22 57 00 39italy@helmutfischer.comwww.helmut-fischer.com

JAPANFISCHER INSTRUMENTS K.K.Shinmei 1-9-16· Souka-shiSaitama-ken 340-0012 · Japan

: (+81) 489 29 34 55Fax: (+81) 489 29 34 51japan@helmutfischer.comwww.helmut-fischer.com

FRANCEFISCHER INSTRUMENTATION ELECTRONIQUEParc d'Activités Nord du Pas du Lac · 5, rue Michaël FaradayF-78180 Montigny le BretonneuxBP 289 · F-78053 St Quentin en Yvelines Cedex

: (+33) (0) 1 30 58 00 58Fax: (+33) (0) 1 30 58 89 50france@helmutfischer.comwww.helmut-fischer.com

HONG KONGFISCHER INSTRUMENTATION (FAR EAST) LTD.Unit 2901 · Level 29Metroplaza Tower 2223 Hing Fong RoadKwai Chung, N.T.Hong Kong

: (+852) 24 20 11 00Fax: (+852) 24 87 02 18hongkong@helmutfischer.comwww.helmut-fischer.com

THE NETHERLANDSHELMUT FISCHER MEETTECHNIEK B.V.Tarasconweg 10NL-5627 GB EindhovenPostbus 1828NL-5602 CA Eindhoven

: (+31) 40 248 22 55Fax: (+31) 40 242 88 85netherlands@helmutfischer.comwww.helmut-fischer.com

CHINANANTONG FISCHER INSTRUMENTATION LTD.7F, No. 2 Building2601 Songhuajiang RoadShanghai 200437 · P.R.C.

: (+86) 21 65 55 74 55 Fax: (+86) 21 65 55 24 41china@helmutfischer.comwww.helmut-fischer.com

SINGAPOREFISCHER INSTRUMENTATION (S) PTE LTD.102 E Pasir Panjang Road #04-04Citilink Warehouse ComplexSingapore 118529

: (+65) 62 76 67 76Fax: (+65) 62 76 76 67singapore@helmutfischer.comwww.helmut-fischer.com

DKD-D-33101Accredited acc. toDIN EN ISO/IEC 17025

Valid for Helmut Fischer AG and Branch Offices