creating a layout sheet. sketching key terms & definitions mechanical drafting: drawings are...
Post on 05-Jan-2016
234 Views
Preview:
TRANSCRIPT
Creating a Layout sheet
SketchingSketching Key Terms & Definitions
Mechanical Drafting: Drawings are created using mechanical instruments.
Layout Sheet: consists of borders and a title block that help identify boundaries and information about the item that is
drawn.
Title Block: located at the bottom of the sheet, contains data about the drawing
and its drafter.
sketchingsketching Layout Sheet
Recommendations are made by the American Society of Mechanical Engineers for drawing sheet borders and basic title
block data. However, these vary somewhat due to the needs a specific application or
industry.
The layout sheet consists of borders and a title block.
The borders set a boundary for the drawing and the title supplies information about the
drawing and its drafter.
activity !activity ! Sketching a Layout Sheet
---------- ¼” Border
Sketching a Layout Sheet Step 1: Draw a ¼ ” Border around the
sheet of paper.
¼”
Border
activity !activity ! Sketching a Layout Sheet
---------- ⅝” Title Block
Sketching a Layout Sheet Step 2: Draw a line ⅝” above the bottom
border line.
¼”
Border
⅝”Title
Block
activity !activity ! Sketching a Layout Sheet
----------Title Block Detail
Sketching a Layout Sheet Step 3: Segment the Title Block.
¼”
Border
⅝”Title
Block
Sketching a Layout Sheet Step 3: Segment the Title Block.
1” 4 ¼ ”
1”4 ¼ ”
activity !activity ! Sketching a Layout Sheet
----------Guidelines
1” 1”4 ¼ ”
4 ¼ ”
Sketching a Layout Sheet Step 4: Guidelines
NOTE: ALL GUIDELINES ARE ⅛” APART
⅛”
activity !activity ! Sketching a Layout Sheet
----------Title Block Data
1” 1”4 ¼ ”
4 ¼ ”
DATE:
SCALE:
SCHOOL:
TOWN:
PARTNAME:
DRAFTERNAME:
SHEET NUMBER
STEP 2: Title BlockDraw a Horizontal Line, 5/8” above the bottom borderline.
STEP 3: Segment the Title BlockDraw a Vertical Line, in 1” from the left border lineDraw a Vertical Line, in 1” from the right border line.Draw a Vertical Line, in 5 ¼” from the left border line.
STEP 4: Guidelines5 sections1/8” apartConstruction Lines ONLY
STEP 5: Title Block Data Segment 1: Date / Scale Segment 2: School / Town, State Segment 3: Part Name / Drafter Name Segment 4: Sheet Number
STEP 1: Border¼” in from all sides
top related