countersunk head with tx-star recess, yellow zinc … quality of fischer power- ... 10 80 52 18,5 8...

http://www.fischer.de/en/ - 26/02/2014

Countersunk head with TX-Star recess,yellow zinc plated, partial thread

Scr

ew

s

1

The premium screw for load-bearing wood structures

Diameter 8,0

BUILDING MATERIALS

Glued-laminated timber▪Cross-laminated timber▪Laminated veneer plywood panels▪Oriented strand boards (e.g. OSBpanels)

▪

Hard wood (e.g. beech, oak, etc.)▪Solid structural timber▪Glued timber boards on solid wood▪Soft wood (e.g. Douglas, spruce,pine, fir, etc.)

▪

and other wood materials▪

APPROVALS

ADVANTAGES/BENEFITS

The unique Power-Fast threadreaches into the screw tip andensures a fast bite. This makesinstallation simple and safe evenwith the large screw dimension usedspecifically for load-bearing woodstructures.

▪

The shank ribs reduce drive-inresistance and thereby enable powerand battery conservation in yourwork.

▪

The wood construction screw withflange head can hold much greaterloads thanks to the higher pull-through resistance.

▪

The ETA approval guarantees thehigh safety standard and thepremium quality of fischer Power-Fast screws.

▪

APPLICATIONS

Safety-relevant applications▪Wood frame construction▪Post construction▪Timber houses▪Rooftop insulation systems▪Car ports▪Conservatories▪Playground equipment▪

FUNCTIONING

Screws with countersunk head canbe flush mounted with the wood.

▪

The flange head screws areparticularly effective thanks to theirhigh pull-through resistance.

▪

Additional washers can alsooptionally be used for screws with acountersunk head. These washersalso increase the pull-throughresistance.

▪

TECHNICAL DATA

Countersunk head with TX-Star

recess, yellow zinc plated, partial

thread

http://www.fischer.de/en/ - 26/02/2014

Scr

ew

s

2

Diameter 10,0

Diameter Length Partialthreadlength

Headdiameter

Drive Art.-No.

Appr

oval Sales unit

D l[mm] [mm] [mm] [Ø mm] [mm] Art.-No. Article name [pcs]

8.0 80 14,7 6.5 TX40 659189 ■ 758.0 100 14,7 6.5 TX40 659190 ■ 758.0 120 14,7 6.5 TX40 659191 ■ 758.0 140 14,7 6.5 TX40 659192 ■ 758.0 160 14,7 6.5 TX40 659193 ■ 758.0 180 14,7 6.5 TX40 659194 ■ 758.0 200 14,7 6.5 TX40 659195 ■ 758.0 220 14,7 6.5 TX40 659196 ■ 758.0 240 14,7 6.5 TX40 659197 ■ 758.0 260 14,7 6.5 TX40 659198 ■ 758.0 280 14,7 6.5 TX40 659199 ■ 758.0 300 14,7 6.5 TX40 659200 ■ 758.0 320 14,7 6.5 TX40 659201 ■ 508.0 340 14,7 6.5 TX40 659202 ■ 508.0 360 14,7 6.5 TX40 659203 ■ 508.0 380 14,7 6.5 TX40 659204 ■ 508.0 400 14,7 6.5 TX40 659205 ■ 50

Diameter Length Partialthreadlength

Headdiameter

Drive Art.-No.

Appr

oval Sales unit

D l[mm] [mm] [mm] [Ø mm] [mm] Art.-No. Article name [pcs]

10 80 52 18,5 8 TX40 659018 FCS-ST 10,0 x 80 YZP 50 ■ 5010 100 52 18,5 8 TX40 659019 FCS-ST 10,0 x 100 YZP 50 ■ 5010 120 80 18,5 8 TX40 659020 FCS-ST 10,0 x 120 YZP 50 ■ 5010 140 80 18,5 8 TX40 659021 FCS-ST 10,0 x 140 YZP 50 ■ 5010 160 80 18,5 8 TX40 659022 FCS-ST 10,0 x 160 YZP 50 ■ 5010 180 80 18,5 8 TX40 659023 FCS-ST 10,0 x 180 YZP 50 ■ 5010 200 80 18,5 8 TX40 659024 FCS-ST 10,0 x 200 YZP 50 ■ 5010 220 80 18,5 8 TX40 659025 FCS-ST 10,0 x 220 YZP 50 ■ 5010 240 80 18,5 8 TX40 659026 FCS-ST 10,0 x 240 YZP 50 ■ 5010 260 80 18,5 8 TX40 659027 FCS-ST 10,0 x 260 YZP 50 ■ 5010 280 80 18,5 8 TX40 659028 FCS-ST 10,0 x 280 YZP 50 ■ 5010 300 80 18,5 8 TX40 659029 FCS-ST 10,0 x 300 YZP 50 ■ 5010 320 80 18,5 8 TX40 659030 FCS-ST 10,0 x 320 YZP 50 ■ 5010 340 80 18,5 8 TX40 659031 FCS-ST 10,0 x 340 YZP 50 ■ 5010 360 80 18,5 8 TX40 659032 FCS-ST 10,0 x 360 YZP 50 ■ 5010 380 80 18,5 8 TX40 659033 FCS-ST 10,0 x 380 YZP 50 ■ 5010 400 80 18,5 8 TX40 659034 FCS-ST 10,0 x 400 YZP 50 ■ 50

Countersunk head with TX-Star recess,yellow zinc plated, partial thread