cool white 90 led luminaire by cree · 90 led luminaire installation the industry’s best-selling...
Post on 06-Oct-2020
29 Views
Preview:
TRANSCRIPT
COOL WHITE 90® LED LUMINAIRE BY CREE®
3 Cree Light Fixtures on a 14’ x 18’
“They are the brightest lights around.
They outshine the competition!”
– Mark Saben, Saben Outdoor
www.formetco.com • (800) 367-6382
Features and Benefits:
• Lumen Output 14,550
• 70% Power Savings Over 400 Watt Metal Halide Luminaires
• 10 Year Limited Warranty
• Easy Retrofit Installation
• Super White Light Provides Superior Display Clarity
• Color Rendering Index (CRI) 90 (Daylight is 100)
• Cast Aluminum Housing for Exceptional Durability
Watch Our Video on Formetco Cool White 90 LED Luminaire Installation
The Industry’s Best-Selling LED Luminaire
CAMERA-READY LOGOTYPE – UL MARKThese Marks are registered by Underwriters Laboratories Inc.
The minimum height of the registered trademark symbol ® shall be 3/64 of an inch. When the overall diameter of the UL Mark is less than 3/8 of an inch, the trademark symbol may be omitted if it is not legible to the naked eye.
The font for all letter forms is Helvetica Condensed Black, except for the trademark symbol ®, which isHelvetica Condensed Medium. No other fonts are acceptable.
200-195A 20M/11/97
1 Cree Light Fixture on a Poster Board
10 Year 14,550 26 lbs DLC
14' x 48'3 Fixtures
10'6" x 36' 2 Fixtures
Poster 1 Fixture
Manufacturer’s Limited Warranty
Approved for Utility Rebates
Lumen Output
Total Weight
P5KG84PWM
COOL WHITE 90® LED LUMINAIRE BY CREE
The Cool White 90 luminaires manufactured by CREE take billboard lighting to a new level of brightness, and can deliver as much as 70% energy savings. These lights produce a near daylight white, and come with a 10 year limited warranty.
Product Code FIXLEDCREECW90
COOL WHITE 90 LED LUMINAIRE INSTALLATION
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
DANGER – Risk of shock. Disconnect power before installation.
FIGURE 1
FIGURE 2
Housing Cover
Mounting Bolt Nuts
Wiring Compartment Cover Pole
Mounting Clamps
PoleMount
Gasket
STANDARD MOUNTING
STEP 1: Remove the wiring compartment cover by using a Philips screwdriver to remove (2) screws and set aside to rein-stall later. See Figure 1.
STEP 2: Locate the electrical cord. To ensure that the cord is clear of the mount-ing clamps, pull the cord through the wiring compartment access hole. See Figure 1.
STEP 3: Slide the luminaire onto the pole through the opening on the mounting clamps. Ensure that the pole is inserted all the way into the gasket in the mount. See Figures 1 and 2.
STEP 4: If mounting onto a round pipe, ensure that the luminaire is level from side to side.
STEP 5: Locate the (2) mounting bolt nuts on the luminaire, and using a 9/16” socket, tighten the bolt nuts to 240in-lb (27 NM) See Figure 1.
STEP 6: Make wiring connections refer-encing the Electrical Connections section.
STEP 7: Replace the wiring compartment cover that was removed in Step 1 by using a Pilips screwdriver to tighten the (2) screws to 10 in-lb (1.1 NM). Ensure that no wires are pinched.
P5KG84PWM
CAMERA-READY LOGOTYPE – UL MARKThese Marks are registered by Underwriters Laboratories Inc.
The minimum height of the registered trademark symbol ® shall be 3/64 of an inch. When the overall diameter of the UL Mark is less than 3/8 of an inch, the trademark symbol may be omitted if it is not legible to the naked eye.
The font for all letter forms is Helvetica Condensed Black, except for the trademark symbol ®, which isHelvetica Condensed Medium. No other fonts are acceptable.
200-195A 20M/11/97
top related