certificate - cmg plastics...fssc 22000 certification scheme for food safety systems including iso...
Post on 03-Aug-2020
9 Views
Preview:
TRANSCRIPT
Accredited Body: DQS CFS GmbH, August-Schanz-Straße 21, 60433 Frankfurt am Main, Germany Validity of this certificate can be verified in the FSSC 22000 database of certified organizations available on www.fssc22000.com.
CERTIFICATE
This is to certify that the food safety management system of the company
Custom Molders Group, LLC.
160 Meister Avenue, Suite 1 Somerville, NJ 08876 USA
has been assessed and determined to comply with the requirements of Food Safety System Certification (FSSC) 22000 (Version 4.1) Certification scheme for food safety management systems consisting of the following elements: ISO 22000:2005, ISO/TS 22002-4:2013 and Additional FSSC 22000 requirements (Version 4.1). This certificate is applicable for the scope of: Injection molding, blow molding and printing of rigid plastic utensils, containers and lids for direct and indirect food contact. Category: I
Date of initial certification
Certification decision
Date of audit
(Re)Issuing date
This certificate is valid until
Registration no.
Frankfurt am Main
2017-07-19
2018-07-26
2018-06-29
2018-07-26
2020-07-18
10012309 FSSC V4
2018-07-26
DQS CFS GmbH German Association for Sustainability
Dr. Sied Sadek Managing Director
Accredited Body: DQS CFS GmbH, August-Schanz-Straße 21, 60433 Frankfurt am Main, Germany
CERTIFICATE
This is to certify that the food safety management system of the company
Custom Injection Molders Canada
99 Savannah Oaks Drive, Unit 6 Brantford, ON N3V 1E8 Canada
has been assessed and complies with the requirements of
FSSC 22000 Certification scheme for food safety systems including ISO 22000:2005, ISO/TS 22002-4:2013 and additional FSSC 22000 requirements This certificate is applicable for: Injection molding and blow molding of rigid plastic utensils, containers and lids for direct and indirect food contact. Category: I This certificate is provided on the base of the FSSC 22000 certification scheme, version 3.2, published February 26th 2015.The certification system consists of a minimum annual audit of the food safety management systems and a minimum annual verification of the PRP elements and additional requirements as included in the scheme and ISO/TS 22002-4.
Date of initial certification
Certification decision
Date of audit
(Re)Issuing date
This certificate is valid until
Registration no.
Frankfurt am Main
2017-12-18
2017-12-18
2017-12-01
2017-12-18
2020-12-17
10015302 FSSC2013
2017-12-18
DQS CFS GmbH German Association for Sustainability
Dr. Sied Sadek Managing Director
top related