catia for composites design & manufacturing preparation · pdf filecatia for composites...

CATIA for Composites

Design & Manufacturing Preparation

Design and produce: better, stronger and lighter

domenico.berardi@3ds.com

Cell +39 3464002722

«Creazione forme

& geometrie »

«

Esperienz

a »

« Realtà

Tangibile »

3

4

“Aumentate la competitivita’ dei clienti”

1970 1995 2000 2005 2010 1985

Typical needs of the composites industry

Design intent & Design context

CATIA for Composites:

The backbone of an extended solution

CATIA Composites: From shapes to Laminates

Initial Design – Surfaces & geometry preparation

Manufacturing

Preparation

Plies – Detailed Design

Engineering

Deliverables

Digital Mock-Up

Integration

What is a ply in CATIA ?

The « Ply Lifecycle management » in CATIA

Engineering deliverables…

Manufacturing Preparation

Solid and tapers approach

Zones and transition zones approach

Zones and Staggering edges approach

Grid approach

Engineering deliverables, DMU integration…

Manufacturing Preparation

Integrated composite structural analysis

SIMULIA for composites structures performances

DELMIA composites production planning & documentation

22

Solution

• Rules based utomatic rocess planning of composite plies

• Reuse engineering ply data in planning

• Deliver accurate as-planned and as-designed information to the shop floor

• End to end process coverage with DS V5 Partner solutions

Results

• Reduce Planning time up to 90%

• Avoid re-work with error free communication

• Minimize design changes with feedback loop

3D VIA for e-ply book

3D Via Composer reads natively CATIA Composites

entities. It allows the diffusion of electronic ply book

and training manuals to the shopfloor.