cadillac cts 2008-2014 table of contents...
Post on 03-Jun-2018
215 Views
Preview:
TRANSCRIPT
CAUTION! All accessories, switches, climate controls panels, and especially air bag indicator lights must be connected before cycling the ignition. Also, do not remove the factory radio with the key in the on position, or while the vehicle is running.
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/25/18 INST99-3018
I N S TA L L AT I O N I N S T R U C T I O N S99-3018
KIT FEATURES• ISODINradioprovisionwithpocket•ISODDINradioprovision• 99-3018HG-glossblack,99-3018S-silver
KIT COMPONENTS•A)Radiotrimpanel•B)Radiobrackets•C)Pocket•D)Upperdashtrimpanel(fornavigationmodels)•E)(2)Plasticwashers•F)(2)Metalclips•G)(4)#8x3/8”Phillipstruss-headscrews•H)(8)#8x3/8”Phillipspan-headscrews•I)(2)Copperthreadedinserts•J)Axxessinterfaceandwiringharness(notshown)
TOOLS REQUIRED•Panelremovaltool•9/32”socketwrench•T-10Torxdriver•Cuttingtool•Phillipsscrewdriver
TABLE OF CONTENTS
DashDisassembly.............................................. 2-4KitPreparation.......................................................5KitAssembly–ISODINradioprovisionwithpocket..................6–ISODDINradioprovision.....................................6AxxessInterfaceInstallation.............................7-15
WIRING & ANTENNA CONNECTIONS
WiringHarness:AxxessinterfaceandharnessincludedAntennaAdapter:40-EU10(soldsep.)Steeringwheelcontrolinterface:ASWC-1(soldsep.)Backupcameraretention:BACKUPCAM-2(soldsep.)
A B C
HG I
D E F
Cadillac*CTS(Coupe)2014, CTS-V2008-2014CTS(Coupe/Sedan)2008-2013*PleasenotethiskitwillnotworkintheSportWagon
1.800.221.0932 | MetraOnline.com2
1. Removetheleftandrightshiftersidetrimpanels.(FigureA)
2a. Auto transmission vehicles: Uncliptheshiftertrim.(FigureB)
Note:Thebootandknobwillremaininplace.
2b. Manual transmission vehicles:Uncliptheshiftertrimandpullstraightupontheshiftknobtoremovetheknobandtrimasoneunit.(FigureC)
Note:Thisrequiresalotofforce,donottwisttheknoborthelockingtabinsidetheshiftknobwillbreak.
Continuedonthenextpage
(FigureB)(FigureA) (FigureC)
DASH DISASSEMBLY
REV. 5/25/2018 INST99-3018 3
3. Removethedashtrimonbothsidesoftheradiopanel.(FiguresD,E)
4. Unclipthetopdashradiotrim(non-navigationmodelsonly).(FigureF)
Note:Therewillbeastrapconnectedtothispanelthatcannotberemoveduntilstep5isperformed.Afterstep5,remove(1)9/32”screwsecuringthestrapandthenremovethepanel.
Continuedonthenextpage
DASH DISASSEMBLY (CONT.)
(FigureE)(FigureD) (FigureF)
1.800.221.0932 | MetraOnline.com4
DASH DISASSEMBLY (CONT.)
Unless otherwise stated, ensure that the vehicle is completely off before proceeding onto the following steps:
5. Remove(2)9/32”screwsfromthebottomoftheradio/climatecontrolpanelandunplug&removethepanel(FigureG)
(WARNING!!! Do not unplug the panel if the vehicle has factory navigation, continue to step 6).
6. Navigation models only:Withtheradio/climatecontrolpanelstillconnected,cyclethekeytoaccessory,andthenpressthebuttonontheupperleftofthepaneltoraisethenavigationscreen.Remove(3)9/32”screwsholdingthescreenintothedash,unplugandremovethescreen,turnthekeytotheoffposition,andthenremovethekeyfromtheignition.Nowitissafetounplugandremovetheradio/climatecontrolpanel.(FigureH)
Note:Failuretofollowthisstepproperlywillresultintheairbaglightilluminatingintheinstrumentcluster.
7. Remove(4)9/32”screwsfromtheradiochassis,andthenunplugandremovetheradiochassisfromthedash.(FigureI)
ContinuetoKitPreparation
(FigureI)(FigureG)
(FigureH)
REV. 5/25/2018 INST99-3018 5
KIT PREPARATION
1. Remove(4)Phillipsscrewstoremovetheashtray/pocketfromthebottomoftheradio/climatecontrolpanel.(FigureA)
2. Remove(4)T-10Torxscrewsand(16)Phillipsscrewstoremovetheradio/climatecontrols,andradio/climatebezelfromthepanel.(FigureB)
Note:Theradio/climatebezelwillnotbeusedinthisinstallation.
3. Remove(4)Phillipsscrewstoremovetheupperscreentrimpanel.
4. Cuttheradio/climatecontrolpanelclocksupportareaasshowninthediagram.(FigureC)
Note:Ventremovalisoptional.
5. Usingeitherthefactoryhardwareorthe(8)#8x3/8”Phillipspan-headscrewsprovided,securethe99-3018radiotrimpanelandfactorycomponentstothemodifiedfactorypanel.(FigureDandE)
6. Usethe(2)suppliedplasticwashersonthetoptwomountingpositions.(FigureF)
7. Connecttheleftandrightclimatecontrolconnectorstotheradio/climatecontrolpanel.(FigureG)
ContinuetoKitAssembly
(FigureA) (FigureE)
(FigureD)
(FigureB) (FigureF)
(FigureC) (FigureG)
Removeshadedarea
1.800.221.0932 | MetraOnline.com6
KIT ASSEMBLY
ISO DIN radio provision with pocket
1. Securetheradiobracketstothepocketusingthe(4)#8x3/8”Phillipsscrewsprovided.(FigureA)
2. RemovethemetalDINsleeveandtrimringfromtheaftermarketradio.
3. Slidetheradiointothebracket/pocketassembly,thensecureitusingthescrewssuppliedwiththeradio.(FigureB)
ContinuetoAxxessInterfaceInstallation
ISO DDIN radio provision
1. Securetheradiobracketstotheradiousingthescrewssuppliedwiththeradio.(FigureA)
ContinuetoAxxessInterfaceInstallation
(FigureA)(FigureA)
(FigureB)
REV. 5/25/2018 INST99-3018 7
AXXESS INTERFACE INSTALLATION
INTERFACE FEATURES
INTERFACE COMPONENTS• Axxessinterface• 3018harness• 16-pinharnesswithstrippedleads• 4-pinto4-pinresistorpadharness
TOOLS REQUIRED•Crimpingtoolandconnectors,orsoldergun,solder,andheatshrink•Smallflatbladescrewdriver•Tape•Wirecutter•Zipties
TABLE OF CONTENTS
Connectionstobemade..........................................................................................................8-13 Formodelswithoutanamplifier....................................................................................... 8-9 Formodelswithananalogamplifier...............................................................................10-11 Formodelswithadigitalamplifier..................................................................................12-13InstallingtheAxxessinterface................................................................................................... 13ProgrammingtheAxxessinterface........................................................................................... 14AdjustingtheAxxessinterface................................................................................................... 14Finalassembly............................................................................................................................. 15Troubleshooting........................................................................................................................... 15
• Providesaccessorypower(12-volt10-amp)• MaintainstheRetainedAccessoryPower(R.A.P.)feature• ProvidesNAVoutputs(parkingbrake,reverse,speedsense)• Retainswarningchimes• RetainsOnStar/OEBluetooth• AdjustablevolumeforchimesandOnStar• RetainsthefactoryAUX-INjack• Pre-wiredASWC-1harness(ASWC-1soldseparately)• Canbeusedinnon-amplified,oranalog/digitalamplifiedmodels*• Retainsbalanceandfade†• Micro“B”USBupdatable
*Pleasereferencethe“ServicePartsIdentification”stickerlocatedunderthesparetirecover.IftheRPOcodeUQAislisted,thenthevehicleisequippedwithananalog“DELCO”amplifier.IftheRPOcodeUQSislisted,thenthevehicleisequippedwithadigital“BOSE”amplifier.
†Excludingdigitalamplifiedmodels
1.800.221.0932 | MetraOnline.com8
CONNECTIONS TO BE MADE
• ConnecttheGreen/Purplewiretothereversewire.
• ConnecttheLight Greenwiretotheparkingbrakewire.
• Tapeoffanddisregardthefollowing(5)wires,theywillnotbeusedinthisapplication:Blue/White, Purple, Purple/Black, Green, Green/Black
From the 3018 harness to the aftermarket radio:
• ConnecttheBlackwiretothegroundwire.
• ConnecttheYellowwiretothebatterywire.
• IfinstallingeitheranASWC-1orAX-LCD(bothsoldseparately),connectthe(2)Redwirestoaccessorypower.
• CutoffandremovetheresistorsfromtheGreen, Green/Black, Purple, and Purple/Blackwiresbelowtheheatshrink.
• ConnecttheGreenwiretotheleftrearpositivespeakeroutput.
• ConnecttheGreen/Blackwiretotheleftrearnegativespeakeroutput.
• ConnectthePurplewiretotherightrearpositivespeakeroutput.
• ConnectthePurple/Blackwiretotherightrearnegativespeakeroutput.
• Ensurethe(2)4-pinMolexconnectorsareconnectedtogether.
Note:The4-pinto4-pinresistorpadharnesswillnotbeusedinthisapplication.
Continuedonthenextpage
Attention!Thisinterfacewillworkwithmodelsthatareeithernon-amplified,analogamplified,ordigitalamplified.Pleasefollowtheinstructionscarefullyforyourmodelvehicle.Failuretodosowillresultineithernosound,orlowsound.Ifyouareunsureifyourvehicleisfactoryamplifiedornot,pleasecontactyourlocaldealership.
For models without an amplifier:
From the 16-pin harness with stripped leads to the aftermarket radio:
• ConnecttheRedwiretotheaccessorywire.
Note:IfinstallingeitheranASWC-1orAX-LCD(bothsoldseparately),connectthe(2)Redwiresfromthe3018harnessaswell.
• Iftheaftermarketradiohasanilluminationwire,connecttheOrange/Whitewiretoit.
• Iftheaftermarketradiohasamutewire,connecttheBrownwiretoit.Ifthemutewireisnotconnected,theradiowillturnoffwhenOnStarisactivated.
• ConnecttheGraywiretotherightfrontpositivespeakeroutput.
• ConnecttheGray/Blackwiretotherightfrontnegativespeakeroutput.
• ConnecttheWhitewiretotheleftfrontpositivespeakeroutput.
• ConnecttheWhite/Blackwiretotheleftfrontnegativespeakeroutput.
Thefollowing(3)wiresareonlyformultimedia/navigationradiosthatrequirethesewires.
• ConnecttheBlue/PinkwiretotheVSS/speedsensewire.
REV. 5/25/2018 INST99-3018 9
CONNECTIONS TO BE MADE (CONT.)
• TheBlack/YellowwireisusedforOnStarleveladjustmentformodelsthatdonotcomeequippedwithsteeringwheelcontrols.RefertotheOnStarlevelAdjustmentsectionforfurtherinstructions.
• Tapeoffanddisregardthe Pinkwirewitharedbulletconnector,itwillnotbeusedinthisapplication.
• IfretainingthefactoryAUX-INjackisdesired,connecttheRedandWhiteRCAjackstotheaudioAUX-INjacksfromtheaftermarketradio.
Note:a)Thejackcanonlybeusedifitisasinglejack.b)IfthejackhasaUSBportaswell,neithercanberetained.
Attention!Thereisan8-pinharnessconnectedtoasmallheatshrinkwrappedcircuitboard:DO NOT DISCONNECT!Thiscircuitboardmustremainconnectedtoallowproperoperationoftheclimatecontrols.
Note:Therelayattachedtothe3018harnessisonlyforaudibleturnsignalclicks.Noextrastepsarerequiredtoretain
12-pin pre-wired ASWC-1 harness:
ThisharnessistobeusedalongwiththeoptionalASWC-1(soldseparately)toretainsteeringwheelaudiocontrols.IftheASWC-1isnotbeingused,disregardthisharness.IftheASWC-1willbeused,pleaserefertotheASWC-1instructionsforradioconnectionsandprogramming.DisregardtheharnessthatcomeswiththeASWC-1.
DIN jack:
TheDINjackistobeusedwiththeoptionalAX-LCD(soldseparately)toretainthepersonalizationmenu.
1.800.221.0932 | MetraOnline.com10
• Tapeoffanddisregardthefollowing(4)wires,theywillnotbeusedinthisapplication:Green, Green/Black, Purple, Purple/Black
From the 3018 harness to the aftermarket radio:
• ConnecttheBlackwiretothegroundwire.
• ConnecttheYellowwiretothebatterywire.
• IfinstallingeitheranASWC-1orAX-LCD(bothsoldseparately),connectthe(2)Redwirestoaccessorypower.
• ConnecttheGreenwiretotheleftrearpositivespeakeroutput.
• ConnecttheGreen/Blackwiretotheleftrearnegativespeakeroutput.
• ConnectthePurplewiretotherightrearpositivespeakeroutput.
• ConnectthePurple/Blackwiretotherightrearnegativespeakeroutput.
• Disconnectthe(2)4-pinMolexconnectorsandthenattachthe4-pinto4-pinresistorpadharness.
• TheBlack/YellowwireisusedforOnStarleveladjustmentformodelsthatdonotcomeequippedwithsteeringwheelcontrols.RefertotheOnStarlevelAdjustmentsectionforfurtherinstructions.
• TapeoffanddisregardthePinkwirewitharedbulletconnector,itwillnotbeusedinthisapplication.
Continuedonthenextpage
For models with an analog amplifier:
From the 16-pin harness with stripped leads to the aftermarket radio:
• ConnecttheRedwiretotheaccessorywire.
Note:IfinstallingeitheranASWC-1orAX-LCD(bothsoldseparately),connectthe(2)Redwiresfromthe3018harnessaswell.
• ConnecttheBlue/Whitewiretotheampturnonwire.Thiswiremustbeconnectedtohearsoundfromthefactoryamplifier.
• Iftheaftermarketradiohasanilluminationwire,connecttheOrange/Whitewiretoit.
• Iftheaftermarketradiohasamutewire,connecttheBrownwiretoit.Ifthemutewireisnotconnected,theradiowillturnoffwhenOnStarisactivated.
• ConnecttheGraywiretotherightfrontpositivespeakeroutput.
• ConnecttheGray/Blackwiretotherightfrontnegativespeakeroutput.
• ConnecttheWhitewiretotheleftfrontpositivespeakeroutput.
• ConnecttheWhite/Blackwiretotheleftfrontnegativespeakeroutput.
Thefollowing(3)wiresareonlyformultimedia/navigationradiosthatrequirethesewires.
• ConnecttheBlue/PinkwiretotheVSS/speedsensewire.
• ConnecttheGreen/Purplewiretothereversewire.
• ConnecttheLight Greenwiretotheparkingbrakewire
CONNECTIONS TO BE MADE (CONT.)
REV. 5/25/2018 INST99-3018 11
• IfretainingthefactoryAUX-INjackisdesired,connecttheRedandWhiteRCAjackstotheaudioAUX-INjacksfromtheaftermarketradio.
Note:a)Thejackcanonlybeusedifitisasinglejack.b)IfthejackhasaUSBportaswell,neithercanberetained.
Attention!Thereisan8-pinharnessconnectedtoasmallheatshrinkwrappedcircuitboard:DO NOT DISCONNECT! Thiscircuitboardmustremainconnectedtoallowproperoperationoftheclimatecontrols.
Note:Therelayattachedtothe3018harnessisonlyforaudibleturnsignalclicks.Noextrastepsarerequiredtoretainthisfeature,soleavetherelayas-is.
CONNECTIONS TO BE MADE (CONT.)
12-pin pre-wired ASWC-1 harness:
ThisharnessistobeusedalongwiththeoptionalASWC-1(soldseparately)toretainsteeringwheelaudiocontrols.IftheASWC-1isnotbeingused,disregardthisharness.IftheASWC-1willbeused,pleaserefertotheASWC-1instructionsforradioconnectionsandprogramming.DisregardtheharnessthatcomeswiththeASWC-1.
DIN jack:
TheDINjackistobeusedwiththeoptionalAX-LCD(soldseparately)toretainthepersonalizationmenu.
1.800.221.0932 | MetraOnline.com12
For models with a digital amplifier:
From the 16-pin harness with stripped leads to the aftermarket radio:
• ConnecttheRedwiretotheaccessorywire.
Note:IfinstallingeitheranASWC-1orAX-LCD(bothsoldseparately),connectthe(2)Redwiresfromthe3018harnessaswell.
• ConnecttheBlue/Whitewiretotheampturnonwire.Thiswiremustbeconnectedtohearsoundfromthefactoryamplifier.
• Iftheaftermarketradiohasanilluminationwire,connecttheOrange/Whitewiretoit.
• Iftheaftermarketradiohasamutewire,connecttheBrownwiretoit.Ifthemutewireisnotconnected,theradiowillturnoffwhenOnStarisactivated.
• ConnecttheGraywiretotherightfrontpositivespeakeroutput.
• ConnecttheGray/Blackwiretotherightfrontnegativespeakeroutput.
• ConnecttheWhite wiretotheleftfrontpositivespeakeroutput.
• ConnecttheWhite/Blackwiretotheleftfrontnegativespeakeroutput.
• ConnecttheGreenwiretotheleftrearpositivespeakeroutput.
• ConnecttheGreen/Blackwiretotheleftrearnegativespeakeroutput.
• ConnectthePurplewiretotherightrearpositivespeakeroutput.
• ConnectthePurple/Blackwiretotherightrearnegativeoutput.
Thefollowing(3)wiresareonlyformultimedia/navigationradiosthatrequirethesewires.
• ConnecttheBlue/PinkwiretotheVSS/speedsensewire.
• ConnecttheGreen/Purplewiretothereversewire.
• Connectthe Light Greenwiretotheparkingbrakewire
From the 3018 harness to the aftermarket radio:
• ConnecttheBlackwiretothegroundwire.
• ConnecttheYellowwiretothebatterywire.
• IfinstallingeitheranASWC-1orAX-LCD(bothsoldseparately),connectthe(2)Redwirestoaccessorypower.
• Ensurethe(2)4-pinMolexconnectorsareconnectedtogether.
Note:The4-pinto4-pinresistorpadharnesswillnotbeusedinthisapplication.
• TheBlack/YellowwireisusedforOnStarleveladjustmentformodelsthatdonotcomeequippedwithsteeringwheelcontrols.RefertotheOnStarlevelAdjustmentsectionforfurtherinstructions.
• TapeoffanddisregardthePinkwirewitharedbulletconnector,itwillnotbeusedinthisapplication.
• Tapeoffanddisregardthefollowing(4)wires,theywillnotbeusedinthisapplication: Green, Green/Black, Purple, Purple/Black
Continuedonthenextpage
CONNECTIONS TO BE MADE (CONT.)
REV. 5/25/2018 INST99-3018 13
CONNECTIONS TO BE MADE (CONT.) INSTALLING THE INTERFACE
• IfretainingthefactoryAUX-INjackisdesired,connecttheRedandWhiteRCAjackstotheaudioAUX-INjacksfromtheaftermarketradio.
Note:a)Thejackcanonlybeusedifitisasinglejack.b)IfthejackhasaUSBportaswell,neithercanberetained.
Attention!Thereisan8-pinharnessconnectedtoasmallheatshrinkwrappedcircuitboard:DO NOT DISCONNECT! Thiscircuitboardmustremainconnectedtoallowproperoperationoftheclimatecontrols.
Note:Therelayattachedtothe3018harnessisonlyforaudibleturnsignalclicks.Noextrastepsarerequiredtoretainthisfeature,soleavetherelayas-is.
12-pin pre-wired ASWC-1 harness:
ThisharnessistobeusedalongwiththeoptionalASWC-1(soldseparately)toretainsteeringwheelaudiocontrols.IftheASWC-1isnotbeingused,disregardthisharness.IftheASWC-1willbeused,pleaserefertotheASWC-1instructionsforradioconnectionsandprogramming.DisregardtheharnessthatcomeswiththeASWC-1.
DIN jack:
TheDINjackistobeusedwiththeoptionalAX-LCD(soldseparately)toretainthepersonalizationmenu.
With the key in the off position:
1. Connectthe16-pinharnesswithstrippedleads,andthe3018harness,intothe Axxessinterface.
2. Locatethefactoryantennaconnectorinthedashandcompleteallnecessaryconnectionsto theradio.MetrarecommendsusingtheproperantennaadapterfromMetra.
3. Completeallnecessaryconnectionstothefactoryradio/climatecontrols.(FigureA)
4. IfanASWC-1(soldseparately)willbeused,donotconnectituntilthe99-3018Sis programmedandfullyfunctional.
Attention!Donotconnectthe3018harnesstothewiringharnessinthevehiclejustyet.
(FigureA)
1.800.221.0932 | MetraOnline.com14
PROGRAMMING THE INTERFACE ADJUSTING THE INTERFACE
Forthestepsbelow,theL.E.D.locatedinsidetheinterfacecanonlybeseenwhileactive.TheinterfacedoesnotneedtobeopenedtoseetheL.E.D.
Iftheinterfaceeverlosespower,thefollowingstepswillneedtobeperformedagain,startingfrom“Troubleshooting”,“ResettingtheAxxessinterface”.Pleaseensurethattheownerofthevehicleknowsthis.
1. Ensureallentrypointsareclosedincludingthehood,thenstartthevehicle.
2. Connectthe3018harnesstothewiringharnessinthevehicle.TheL.E.D.willinitiallybesolid Greentoindicatetheinterfaceispowered.
3. AfterafewsecondstheL.E.D.willturnsolid Redwhiletheinterfaceautomaticallyprograms tothevehicle.Theradiowillshutoffatthispoint.Thisprocessshouldtake5to30seconds.
4. OncetheinterfacehasbeenprogrammedtheL.E.D.willturnsolidGreen,thentheradiowill comebackon,indicatingprogrammingwassuccessful.
5. Turnthekey(orpushtostartbutton)totheoffposition,waitforthedomelighttogoout, thenopenandclosethedriver’sdoor.
6. Startthevehicle,thentestallfunctionsoftheinstallationforproperoperation.
7. Iftheinterfacefailstofunction,referto“Troubleshooting”,“ResettingtheAxxessinterface”.
Note:TheL.E.D.willturnonsolidGreenforamoment,andthenturnoffundernormaloperationafterthekeyhasbeencycled.
Audio level adjustment (digital amplified models only):
• Withthevehicleandradioturnedon,turnthevolumeup3/4oftheway.
• Withasmallflat-bladescrewdriver,adjustthepotentiometerclockwisetoraisetheaudio level;counterclockwisetolowertheaudiolevel.
• Onceatadesiredlevel,audioleveladjustmentiscomplete
Chime level adjustment:
• Withthevehicleon,turnitoffandleavethekeysinignition.Openthedriver’sdoor; chimeswillbeheard.
• Wait10seconds,andthenwithasmallscrewdriver,turnthepotentiometerclockwiseto raisethechimelevel;counterclockwisetolowerthechimelevel.
• Whenthechimeisatadesiredlevel,removethekeysfromtheignition.Thiswilllockthe chimevolumeatitscurrentlevel.
OnStar level adjustment:
• PresstheOnStarbuttontoactivateit.
• WhileOnStarisspeaking,presstheVOLUME-UPorVOLUME-DOWNbuttononthesteering wheeltoraiseorlowertheOnStarlevel.
• Ifthevehicledoesn’tcomeequippedwithsteeringwheelcontrols,locatetheBlack/Yellow wireonthe3018harness.
• WhileOnStarisspeaking,taptheBlack/Yellowwiretoground.OncetheOnStarlevelisset, itwillstayatthatleveluntiltheBlack/Yellowwireistappedtogroundagain.
REV. 5/25/2018 INST99-3018 15
FINAL ASSEMBLY TROUBLESHOOTING
1a. For vehicles without factory navigation:Insertthe(2)copperthreadedinsertsprovidedwiththekitintotheemptyupperradiomountingholesinthedashcavity,thensecuretheradioassemblytothedashusingthefactoryscrews.
1b. For vehicles with factory navigation:a)Securetheradioassemblytothedashusingthefactoryscrews.b)Attachthemetalpanelclipsprovidedwiththekittotheupperdashtrimpanel.Afactory versionofthispanelisalsoavailablefromtheDealership.(FigureA)
2. Reassemblethedashinreverseorderofdisassemblyusingthe99-3018Sradiotrimpaneltocompletetheinstallation.
(FigureA)
Resetting the Axxess interface
1. TheBlueresetbuttonislocatedinsidetheAxxessinterface,betweenthetwoconnectors.ThebuttonisaccessibleoutsidetheAxxessinterface,noneedtoopentheAxxessinterface.
2. Pressandholdtheresetbuttonfortwoseconds,thenletgotoresettheAxxessinterface.
3. Referto“ProgrammingtheAxxessInterface”fromthispoint.
KNOWLEDGE IS POWEREnhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry.Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.
®
Metra recommends MECP certified technicians
IMPORTANTIf you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling.
Metra. The World’s Best Kits.® MetraOnline.com © COPYRIGHT 2018 METRA ELECTRONICS CORPORATION REV. 5/25/18 INST99-3018
I N S TA L L AT I O N I N S T R U C T I O N S99-3018
top related