build interoperable smart city applications effortlessly
Post on 08-Jan-2017
203 Views
Preview:
TRANSCRIPT
#4: Build Interoperable Smart City Applications Effortlessly
Dr. Steve Liang, Ph.D., P.Eng. Founder and CEO, SensorUp Inc. Associate Professor, University of Calgary
Click here for webinar recording Click here for source codes
What will be covered in this webinar series
Sense Your Smart City: Connect Environmental Sensors to SensorThings API
Visualize Your Smart City: Build a Real-Time Smart City Dashboard for SensorThings API
Analyze Your Smart City: Build Sensor Analytics with SensorThings API
Build Interoperable Smart City Applications Effortlessly
making invisible visible….
RH: 55 % Temp: 18 Celsius
Wind speed and direction: 34 km/h - East
PM 2.5: 5.5 ug/m3
Radiation: 0.48 µSv/day Soil moisture: 45%
Precipitation: 40mm
# of deers passing: 12 per day
Where do you want your dev time spent?
integrate different data from different sensors?
develop useful applications?
or
OGC SensorThings High-Chart and Data-Table (HCDT) Library
http://www.sensorup.com/sensorthings-high-chart-and-data-table-hcdt/
What do you need?
+
•Arduino IDE
•LinkIt ONE board
•Any sensor*
* today we use Grove DHT22 and a Grove Arduino Shield
http://scratchpad.sensorup.com
If you are interested in testing our library, email us.
info@sensorup.com
We will be using our Calgary air quality sensors’ data for today’s tutorial.
http://example.sensorup.com/v1.0
If you are interested in testing our library, email us.
info@sensorup.com
Steve will be in Korea and Spain in the next two weeks teaching SensorThings.
Benicassim, SpainSeoul, Korea
top related