broadband phone adapter
Post on 03-Feb-2022
2 Views
Preview:
TRANSCRIPT
Broadband Phone AdapterQUICK INSTALLATION GUIDE
11 Computer* Your Telephone*
WHAT YOU NEED:
SET UP:
Phone Ports1 and 2
Connect to yourtelephones
BroadbandPhone Adapter
SPA-2102
Ethernet PortConnect to Your PCs
Internet PortConnect to the Internet (WAN)
Power JackConnect to
Power Adapter
Phone Cord* Ethernet Cable 2* Power Adapter
22
Make sure you have all of the following items:
Follow these instructions if you have Qwest® Broadband Service or cable broadband service. If you have a DSLservice from another provider that requires you to enter User Name and Password (PPPoE), or need instructions foran alternative setup, use the User Manual located on line at www.qwest.com/mybroadbandphone.
Shut downyour computer.
Disconnect thepower to yourDSL or cablemodem.
Plug in the Power Adapter to thePower Jack on your BroadbandPhone Adapter. Plug the PowerAdapter into an electrical outlet.
Wait for approximately threeminutes.
Turn on your computer.
Pick up your telephone handset.
If you hear a dial tone, your setup iscomplete. You can now place calls.
If you do not hear a dial tone, go towww.qwest.com/mybroadbandphonefor additional troubleshooting steps.
If your modem isconnected to thecomputer through a USBport, remove the USBcable from the modemand computer. You willnot need the USB cable.
Connect one end of the Blue Cable to theEthernet port on your DSL or cable modem.
Connect the other end of the Blue Cableto the Blue port (labeled Internet) onyour Broadband Phone Adapter.
Note: Ethernet port looks similar to aregular phone jack but is slightly wider.
If your DSL or cable modem does nothave an available Ethernet port, Connectyour computer with another Ethernetcable (not included) to the Yellow port(labeled “Ethernet”) on your BroadbandPhone Adapter.
If your DSL or cable modem has an availableEthernet port, connect your computer directlyto your DSL or cable modem.
Connect a telephone to the Greenport labeled “Phone 1” on yourBroadband Phone Adapter using aphone cord (not included).
If you subscribed to twoBroadband Phone lines, connect asecond telephone to the Greenport labeled “Phone 2” withanother phone cord (not included).
Reconnect the power toyour DSL or cablemodem following theinstructions providedwith your modem.
Wait approximately twominutes.
a b
e fd
hg
c
Copyright © 2007 Qwest. All rights reserved. All trademarks owned by Qwest Communications International Inc.
Broadband Modem*
Copyright © 2008 Qwest. All rights reserved. All brand names and product names are trademarks or registeredtrademarks of their respective holders. All trademarks owned by Qwest Communications International Inc.
You have finished installing your Broadband Phone Adapter! To learn
more about an exciting range ofamazing features available with your
Broadband Phone Service,go online to:
www.qwest.com/mybroadbandphone
Congratulations!
For additional information and help on how to get the most out of your Qwest® Broadband Phone Service
please visit www.qwest.com/mybroadbandphoneor call 1 877-878-7543.
Blue Cable
If any of the items above are missing or are damaged,please contact customer service immediately for replacement.
*Computer, telephone, broadband modem, phone cord and blue cables are not included.
top related