broadband multitester for next generation network or · broadband multitester for next generation...
Post on 27-May-2018
240 Views
Preview:
TRANSCRIPT
Copper Prequalifikation
Triple Play
DTMFVOIP
®
GPON
GoGreen
Resources
DSL Expert
TDRISDNWLAN
Bonding
Vectoring
CRC
Broadband Multitester for Next Generation Network
KE3600
ADSL - VDSL2 / GbE / VDSL2-Vectoring /
ISDN / POTS / Triple Play / Coppertests /
ADSL - VDSL2 / DSLAM Mode (xTU-C) /
Coppertests /
KE3500
KE3400B
Multimedia Tester for full Broadband entry
Universal xDSL Tester
xD
SL P
erf
orm
ance
ADSL - VDSL2 / GbE / VDSL2 Vectoring /
xDSL Bonding / SHDSL /ISDN / POTS / Triple Play /
Fiber / Coppertests /
NEW SCOPE
n TR69 support
n BNG support
n G.FAST ready
n Web Browser
n IPv6 support
n DHCP 60
n QR Code
PON/PTB200+ Mb/s
ADSL2+~6-25 Mb/s
VDSL2~50 Mb/s
CENTRALOFFICE
DSLAM KVz
FTTN
DSLAM KVz
VDSL2VECTORING
~100 Mb/s
VDSL2VECTORING
~100 Mb/sVDSL2G.fast
~500 Mb/s
VDSL2 BONDING~100 Mb/s
Fiber
Copper
Dark Fiber
DSL Bonding
VDSL2
ADSL2+
xDSL Test
Ethernet Test
STB
STB
STB
STB
TV
TV
TV
TV
VoIP
VoIP
VoIP
VoIP
PC
PC
PC
PC
New Broadband Technologies
High Speed Internet makes the availability of more and more increasing bandwidth in the data transmission absolutely necessary.
In addition to the widespread ADSL technology over the copper pair, the expansion of VDSL2 is promoted especially in urban areas. VDSL allows higher bandwidths, but only over short distances. Another costly and therefore little used solution is eg the GPON or Dark Fiber technology. This fiber is not routed as used with VDSL2 up to the street cabinet (FTTC), but also directly to the customer.
Service providers use to optimize the existing VDSL ports the Vectoring technology. This significantly increases the data transfer by eliminating the noise on the twisted pair. Even higher speed on the copper line is to be achieved with G.fast, here data rates up to 500 Mbit/s are possible.
The use of new technologies, especially VDSL2 Vectoring, G.fast and FTTH require a new generation of test and measurement equipment.
The innovative multi xDSL test family does full Vectoring measurement, is prepared for DSL Bonding* and GPON* and can handle their testing tasks reliably in these environments without restrictions.
* KE3600 - future-proof modular technology
Fast multi-tasking operatingAfter a successful synchronization line values or graphs are shown on the large 3.5 " sunlight readable color display. Waiting periods or complicated and time-consuming switching between menu items and views belong to the past. The selection keys provide aeasy exchange between the DSL line parameters, their impact on the application layers, results of Up/Download tests, Ping and Trace Route plus VoIP and IPTV parameters. The multitester are likely to be used as a PC, with real multitasking functionality the user can scroll between the windows. Without the loss of the current synchronization, other parameters or tests can be added and thus enables fast, easy and comprehensive diagnosis.
KE-Manager Software includedThe supplied KE-Manager Software is a flexible tool to manage the KE3600/KE3500, to download the measure-ments and for the creation of customized measurement reports. The surface is very clearly arranged and intuitive to use. Profiles can be easily created and edited in order to transfer them to the xDSL Multitesters.
The optional LiveView function allows to transfer the current measurements from the tester to the Manager Software and look directly at the detailed test results on the PC. Extensive settings facilitates the evaluation of the results. The data can be stored and conveniently printed.
DSLCRC
DSLLOSS
DSLL1
KE
3600
xD
SL
MU
LT
ITE
ST
DSLL2
BATTCHRG
DSLCRC
DSLLOSS
DSLL1
KE
3600
xD
SL
MU
LT
ITE
ST
DSLL2
BATTCHRG
DSLCRC
DSLLOSS
DSLL1
DSLL2
BATTCHRG
KE
3600
xD
SL
MU
LT
ITE
ST
DSLCRC
DSLLOSS
DSLL1
DSLL2
BATTCHRG
KE
3600
xD
SL
MU
LT
ITE
ST
The Advantage: KE3600 and KE3500 MULTITEST Operating Concept
Benefits
VoIP IPTVSFP
Fiber/Copper
GPON
VDSLVectoringAnnex
A/B/J/L/MADSLVDSL
DSLBonding
4 GbESHDSL ISDN
POTS S2MCopper30 MHz
TestKE3600 xDSL MULTITEST
n New handheld tester with the most important interfaces
n Intuitive operation and large, clear display
n ADSL-VDSL2 and VDSL2-Vectoring (ITU-T G.993.5) in one unit
n Supports Annex A/B/J/L/M with DSL-Service Autodetection
n GbE-Port
n Dial-in Test, Ping and Trace Route with IPv6 and IPv4
n Modem-, Router- and Terminal Mode shows all important parameters
n FTP and HTTP Up/Download Tests up to 700 MBit/s
n Large, sunlight readable color TFT with high resulution
n High performance LiPO battery and expandable memory
n Including software for managing and creating protocols
n Future-proof modular technology
Der KE3600 xDSL MULTITEST is a versatile and revolutionary xDSL tester of DSL services in ADSL1/2/2 + / VDSL2 (vectoring) and bundled networks and as well in FTTx deployments (GPON, Dark Fiber).
With a variety of interfaces the outstanding KE3600 xDSL Multitester supports many access network technologies. Accelerated fault diagnosis is made possible by its simple operation even for untrained technicians. Interferences in the network, in the outdoor and inhouse cabling but also in CPE can be narrowed down quickly.
Even in FTTH networks KE3600 carries out measurements at its Ethernet or built-in SFP Port.
With the autodetect function of the DSL service no choice between ADSL and VDSL is necessary. Automated and editable measurements on the copper pair allows fast and efficient work. The universal SFP slot for measurements in FTTx deployments makes the KE3600 the ideal solution for these broadband technologies.
The excellent price-performance and the guaranteed future security by the used module technology makes the KE3600 Multitester the perfect tool for all inspection tasks of current and future broadband technologies and sets standards in its class!
NEWThe "all-in-one" Solution for all Broadband Technologies
VoIP-Tests (see KE3500)
IPTV-Tests (see KE3500)
ISDN/POTS Test Telephone
Coppertests with KECT
TDR-Funktionen (see KE3500)
SFP: Copper/Fiber or GPON
xDSL Bonding
SHDSL 2- to 8-wire
n Handsfree functionn Port and self-testing calln Umfangreiche Dienstabfragen Detailed information on the line statusn BERT Test n Monitoring
n Prequalification of the copper lines:Impedance, Return Loss, Balance, NEXT Measurement, Receive Level and Spectrum, Wideband Noise and Impulse Noise
n Digitale Multimeter Measurements for troubleshooting:Current, Voltage, Insulation, Resitance and Capacitance
n The Loop Analysis summerizes the key measurements and automates the configurable measuremnt process
n KE900 functions: sends switching commands to the optional Remote Unit KE900 directly for comfortable remote switching of copper pairs at the far end of the line
n SFP Copper (as second GbE-Port) or SFP Fibern GPON: ONT, Modem emulation
n ADSL2+ and VDSL2 Bonding (ITU-T G.998.1/2/3)
n Terminal-, Bridge- and Router-Moden Ethernet First Mile (EFM), TDM and ATM supportn Modem (STU-R) and CO / DSLAM emulation (STU-C)
Options
No. Type Description
0.49830 KE3600 xDSL Multitester, 1 GbE Interface, ADSL 1/2/ 2+, 2 GB Storage
0.49830-10 VDSL Upgrade Firmware VDSL2 Annex A, B (Vectoring ITU-T G.993.5)
0.49830-13 KECT Coppertest: xDSL Linie Qualification up to 30 MHz, DMM, integrated Remote Control Functions with KE900
0.49830-11 TDR TDR up to 6 km
0.49830-25 ISDN ISDN BRI S -TE, U (4B3T or 2B1Q) and POTS Interface 0 K0
0.49830-5 VoIP VoIP Tests (terminal simulation) Jitter, MOS, ...
0.49830-6 IPTV IPTV Tests (Set Top Box emulation) Jitter, MOS, ...
0.49830-7B Bonding DSL Bonding Modul, Profile 8a/b/c/d, 12a/b, 17a, 30a
0.49830-26 SHDSL SHDSL 2- to 8-wire interface
DSLCRC
DSLLOSS
DSLL1
KE
3600
xD
SL
MU
LT
ITE
ST
DSLL2
BATTCHRG
DSLCRC
DSLLOSS
DSLL1
KE
3600
xD
SL
MU
LT
ITE
ST
DSLL2
BATTCHRG
DSLCRC
DSLLOSS
DSLL1
KE
3600
xD
SL
MU
LT
ITE
ST
DSLL2
BATTCHRG
DSLCRC
DSLLOSS
DSLL1
KE
3600
xD
SL
MU
LT
ITE
ST
DSLL2
BATTCHRG
NEW
n TR69
n BNG
n G.FAST
n Web Browser
n IPv6 support
n DHCP 60
n QR Code
No. Type Description
0.49810 KE3500 xDSL Multitester, 1 GbE Interface, ADSL 1/2/ 2+ and VDSL2 Vectoring
0.49830-13 KECT xDSL Linie Qualification up to 30 MHz, DMM, integrated Remote Control Functions with KE900
0.49830-11 TDR TDR up to 6 km
0.49810-25 ISDN ISDN BRI S -TE, U (4B3T or 2B1Q) and POTS Interface 0 K0
0.49830-5 VoIP VoIP Tests (terminal simulation) Jitter, MOS, ...
0.498130-6 IPTV IPTV Tests (Set Top Box emulation) Jitter, MOS, ...
VoIP IPTVVDSL
VectoringAnnexA/B/J/L/M
ADSLVDSL 4 GbE
ISDNPOTS
Copper30 MHz
TestKE3500 xDSL MULTITESTNEWFull access to VDSL2-Vectoring and Triple Play Tests
The KE3500 xDSL MULTITEST offers tests in ADSL1/2/2 + and VDSL2 environments with full exams on VDSL-Vectoring. It performs other functions such as ISDN and POTS test telephone, Triple Play testing for IPTV and VoIP aptitude and the ability to do extensive copper testing to 30 MHz make it the universal working tool for installers and service technicians.
With its innovative operation concept several tests are performed simultaneously and are still configurable without the loss of synchronization.
Autodetection of the DSL service and automated measurements on the copper pair allow fast and efficient work.
The user-friendly starting price in broadband measurement technology helps within the acquisition of the required instrumentation.
VoIP Tests
IPTV Tests
ISDN/POTS Test Telephone
Coppertests with KECT
TDR functions (only in conjunction with KECT)
n Terminal simulationn VoIP connections via xDSL and Ethernetn VoIP signaling protocol SIPn Displays Bitrate, Packets and Packet Lossn Jitter, Jitter min/maxn R-Value, MOSn Call setup both with and without
a registrar / proxy
n Set-Top-Box emulationn Review audio and video packetsn Displays Bitrate and Packet Lossn Jitter, MOSn Preview function
n Handsfree functionn Port and self-testing calln Extensive service queryn Detailed information on the line statusn BERT Test n Monitoring
n Prequalification of the copper lines:Impedance, Return Loss, Balance, NEXT Measurement, Receive Level and Spectrum, Wideband Noise and Impulse Noise
n Digitale Multimeter Measurements for troubleshooting:Current, Voltage, Insulation, Resitance and Capacitance
n The Loop Analysis summerizes the key measurements and automates the configurable measuremnt process
n KE900 functions: sends switching commands to the optional Remote Unit KE900 directly for comfortable remote switching of copper pairs at the far end of the line
n TDR functions for precise fault detection and localisa-tion (up to 6 km cable length with ø 0,5 mm)
Options
Benefitsn New handheld tester with the most
important interfaces
n Intuitive operation and large, clear display
n ADSL-VDSL2 and VDSL2-Vectoring (ITU-T G.993.5) in one unit
n Supports Annex A/B/J/L/M with DSL-Service Autodetection
n GbE-Port
n Dial-in Test, Ping and Trace Route with IPv6 and IPv4
n Modem-, Router- and Terminal Mode shows all important parameters
n FTP and HTTP Up/Download Tests up to 700 MBit/s
n Large, sunlight readable color TFT with high resulution
n High performance LiPO battery and expandable memory
n Including software for managing and creating protocols
DSLCRC
DSLLOSS
DSLL1
KE
3500
xD
SL
MU
LT
ITE
ST
BATTCHRG
DSLCRC
DSLLOSS
DSLL1
KE
3500
xD
SL
MU
LT
ITE
ST
BATTCHRG
DSLCRC
DSLLOSS
DSLL1
KE
3500
xD
SL
MU
LT
ITE
ST
BATTCHRG
DSLCRC
DSLLOSS
DSLL1
KE
3500
xD
SL
MU
LT
ITE
ST
BATTCHRG
NEW
n TR69
n BNG
n G.FAST
n Web Browser
n IPv6 support
n DHCP 60
n QR Code
No. Type Description
0.49820B KE3400B xDSL Performance Tester, ADSL 1 to ADSL 2+ Annex A/B/J/L/M, Software
0.49820-10 Upgrade Upgrade Firmware VDSL2
0.49820-12 KECT1 30 MHz Coppertest Interface (in conjunction with new device)
0.49820-13 DrDSL Fault Interpretation Software
AnnexA/B/J/M
ADSLVDSL
Copper30 MHz
Test?
DrDSLModemRouterDSLAMKE3400B xDSL Tester
The KE3400B is the ideal tool for the prequalification, commissioning and troubleshooting on all ADSL and VDSL connections (even for the less experienced technician). In the standard version, it can be operated in the xDSL Modem mode, Router mode and even DSLAM mode (office emulation). This simplify tests procedures of the modem / router in house installations or in repairs.
No. Type Description
0.49250 KE2500 Telco Multimeter, test cords, pouch
The KE2500 Telco Multimeter is designed specifically for telephone 2-wire lines and allows a detailed error analysis and a complete overview of the physical state of the circuit under test.
At a glance
n
n
n
n
n Direct control commands for optional KE900 Remote unit for remote switching of the copper pair
n
Measurement of symmetry, resistance, capacitance
Loop analysis: automated test sequences simplify and speed up measurements
TRMS, AC/DC current and voltage
Insulation measurement with 8 V or 100 V
Analysis of signature + PPA (Telekom)
Telco Multimeter
CopperDMM
NEW30 MHz Line Qualifier
KE2800 Telco Loop Qualifier for fault analysis in the DC and AC field with digital multimeter function, TDR cable fault location and measurements up to 30 MHz.
DMM TDRADSL-VDSL2
Copper
30 MHz
30 MHz Line Qualification
At a glance
n
n
n
n
n
n
n Storage of measurement data, USB transfer
n Direct control commands for optional KE900 Remote unit for remote switching
Impedanz, Return Loss, Unsymmetriedämpfung, NEXT, Pegel, Spektrum und Breitbandgeräusch
Symmetry, resistance, capacitance
Loop analysis: automated test sequences simplify and speed up measurements
TRMS, AC/DC current and voltage
Insulation measurement with 8 V or 100 V
TDR shows and locates cable faults
No. Type Description
0.49280 KE2800 Telco Loop Qualifier, test cords, pouch
The Universal Tester with DSLAM (xTU-C) und Coopertesting
Benefitsn ADSL to VDSL2 in one unitnn Modem/Router and DSLAM Modennnn Test results storable, Software included
Ready forn DrDSL Fault Interpretation Softwaren KECT1 Coppertest up to 30 MHz
Annex A/B/J/L/M
IP-Ping Test, VLAN IdentificationDSL-Lineparameter at a glanceHigh capacity battery for long term use
Options
SNR per tone graph gives back connection to sources of interference.
Coppertests with KECT1
DrDSL Interpretations-Hilfe-Software
This software helps users in plain text to detect existing errors, assess them and to eliminate them. DrDSL also indicates how the data rate would change after removal of the fault/interference source. Can be used in ATU-R and ATU-C mode. Detects defective AOD, bridge taps and other sources of interference and shows the possible to change the data rate.
n Prequalification of the copper lines:Impedance, Return Loss, Balance, NEXT Measurement, Receive Level and Spectrum, Wideband Noise and Impulse Noise
n Digitale Multimeter Measurements for troubleshooting:Current, Voltage, Insulation, Resitance and Capacitance
n The Loop Analysis summerizes the key measurements and automates the measuremnt process
n KE900 functions: sends switching commands to the optional Remote Unit KE900 directly for comfortable remote switching of copper pairs at the far end of the line
n TDR functions for precise fault detection and localisation (up to 6 km cable length with ø 0,5 mm)
n
ADSL-VDSL2
Copper
30 MHz
No. Type Description
0.49620 KE901 KE900 Remote unit + KE910 Control unit, test cords, pouch
0.49620-10 KE900 KE900 Remote for KECT1, KECT, KE2500 and KE2800
The KE901 Loop Test Assitant for remote switching reduces the cost of traveling from the customer returning to the office or the distributor to make changes. This will save your time and thus labor costs. The customer line remains active while driving. There is no influencing of the lines up to 30 MHz.
Cut through: Customers line remains in service up for the start of the measurement, the customer can continue working.Open: Measuring e.g. Noise, Capacity, Voltage, Insulation, etc.
Master-Slave measurement:Can be used to measure the attenuation with an additional signal transmitter so Port 1 is connected to Port 3
Loop measurement: Used to measure the loop resistance
Bonding preperation: This configuration alowes to measure two independent loops for influence to each other
At a glance
n Turn of bridges and switching lines from the distance
n 3 pairs of wires or instruments can be connected
nCustomers line remains in service until the measurement starts
nRemote switching up to 12 km are possible
nSwitching functions are acknowledged acoustically and visually
nWorks with any tester - Regardless of the manufacturer
nKE900: Direct control commands from KE2500/KE2800 and the xDSL Tester with KECT coppertest interface
F1F2
F4F3
0
*#
12
3ABC
DEF
45
6
GHIJKL
MNO
78
9
PQRSTUV
WXYZ
ESC
SEL
ONOFF
DSL
CRC
DSL
LOSS
DSL
L1
DSL
L2
BATT
CHRG
KE
3600
xD
SL p
erf
orm
ance t
este
r
®
F1F2
F4F3
0
*#
12
3ABC
DEF
45
6
GHIJKL
MNO
78
9
PQRSTUV
WXYZ
ESC
SEL
ONOFF
DSL
CRC
DSL
LOSS
DSL
L1
DSL
L2
BATT
CHRG
KE
3600
xD
SL p
erf
orm
ance t
este
r
®
F1F2
F4F3
0
*#
12
3ABC
DEF
45
6
GHIJKL
MNO
78
9
PQRSTUV
WXYZ
ESC
SEL
ONOFF
DSL
CRC
DSL
LOSS
DSL
L1
DSL
L2
BATT
CHRG
KE
3600
xD
SL p
erf
orm
ance t
este
r
®
F1F2
F4F3
0
*#
12
3ABC
DEF
45
6
GHIJKL
MNO
78
9
PQRSTUV
WXYZ
ESC
SEL
ONOFF
DSL
CRC
DSL
LOSS
DSL
L1
DSL
L2
BATT
CHRG
KE
3600
xD
SL p
erf
orm
ance t
este
r
®
KE900
Remote
KE900
Remote
KE900
Remote
KE900
Remote
Housing Heavy duty ABS plastic weather-resistant design Heavy duty ABS plastic weather-resistant designBattery cover equipped with captive screws with silicone rubber control keys.4 test cord receptacles for alligator-to-TF cords Battery cover equipped with captive screws.Resistant Mylar front foil with short operation
Test cords 2 special test cords for testing up to 30 MHzInsertion loss: 0 -30 MHz < 0,5 dBCrosstalk: -78 - -56 dB
Insulated test leads with banana plugsModified DTMF control signalsSample function min. 56 dB amplification
Power source 9 V alkaline battery, typical life 200 h 9 V alkaline battery, typical life 40 h
Dimensions 160 x 95 x 35 mm 150 x 65 x 26 mm
Weight 290 g with battery 95 g with battery
Overvoltage Up to 160 V AC/DCProtection
Up to 160 V AC/DC
KE900 Remote KE910 Controller
KE901 / KE900 Loop Test Assitant
APPLICATIONS KE900 WITH KECTMDF CCC
Slave
CUSTOMER
Master
F1F2
F4F3
0
*#
12
3ABC
DEF
45
6
GHIJKL
MNO
78
9
PQRSTUV
WXYZ
ESC
SEL
ONOFF
DSL
CRC
DSL
LOSS
DSL
L1
DSL
L2
BATT
CHRG
KE
3600
xD
SL p
erf
orm
ance t
este
r
®
KE3600 KE3500 KE3400B
Compliance ITU-T G.992.5 (ADSL2+ incl. Annex A, B, J, M), ADSL1/2/2+ ITU-T G.992.3 (ADSL2 incl. Annex A, B, J, L),
ITU-T G.992.1 (G.DMT incl. Annex A, B, J) ATIS/ANSI T1.413 Issue 2 IEEE 802.3ah (PTM)ITU-T G.998.1/2/3 (Bonding)
ITU-T G.992.5 (ADSL2+ incl. Annex A, B, J, M), ITU-T G.992.5 (ADSL2+ incl. Annex A, B, J, M),ITU-T G.992.3 (ADSL2 incl. Annex A, B, J, L), ITU-T G.992.3 (ADSL2 incl. Annex A, B, J), ITU-T G.992.1 (G.DMT incl. Annex A, B, J) ITU-T G.992.1 (G.DMT incl. Annex A, B, J) ATIS/ANSI T1.413 Issue 2 ATIS/ANSI T1.413 Issue 2 IEEE 802.3ah (PTM) IEEE 802.3ah (PTM)
VDSL2ITU-T G.993.2 Annex A, B (Vectoring)Profiles: 8a/b/c/d, 12a/b, 17aBand Plan: 997, 998, US0IEEE 802.3ah (PTM)
ITU-T G.998.1/2/3 (Bonding with Profile 30a) ITU-T G.993.2 Annex A, B (Vectoring) ITU-T G.993.2 Annex A, BProfiles: 8a/b/c/d, 12a/b, 17a Profiles: 8a/b/c/d, 12a/b, 17a, 30aBand Plan: 997, 998, US0 Band Plan: 997, 998, US0IEEE 802.3ah (PTM) IEEE 802.3ah (PTM)
Encapsulation RFC 2684 supporting bridged Ethernet (IPoE), IPoA (RFC 1577), PPPoE (RFC 2516), PPPoA/LLC and PPPoA/VC-MUX (RFC 2364)
Operating modes DSL Terminal-, Router- and Modem-ModeModem replacement (DSL to Ethernet)Ethernet
DSL Terminal-ModeModem replacement (DSL to Ethernet)
Terminal-Mode DSLAM Terminal Mode (xTU-C)
Login format Username and password using PAP/CHAP
Connectivity TR69 / BNG VLAN ID, VLAN taggingLAN/WAN status VPI/VCIDNS, gateway IPv4 and IPv6DHCP client/server, DHCP vendor class Signal StrengthNAT
VLAN ID, VLAN taggingsupport VPI/VCI
IPv4Signal Strength
Ping test* Ping destination: Gateway, IP-Address or URL *Run any number of Results: Packets sent/received, average round-Number of Pings: 1 to 99 tests simultaneously trip delay (ms)Packet size: 32 to 1200 Bytes (default is 32)Timeout: 1 to 10 secondsResults: Packets sent/received, average round-trip delay (ms)
Trace Route test*
Traceroute destination: Gateway, IP-Address or URL * Run any number of Timeout: in seconds, default is 1 s, maximum is 10 s tests simultaneouslyPacketsize: 32 BytesNumber of hops: 1to 32 (default is 30)Results: Indicates IP address of hop and round trip time in milliseconds (ms)
FTP/HTTP-speed tests*
Address: IP or URL * Run any number of Direction: Upload and/or Download up to 700 MBit/s tests simultaneouslyResults: Timet, kB transferred, speed in kBit/sBookmarks: User-definable
Software IPTV Test (Set Top Box emulation) Jitter, MOS,...options
IPTV Test (Set Top Box emulation) Jitter, MOS,... DrDSL fault interpretation softwareVoIP Test (terminal simulation) Jitter, MOS,... VoIP Test (terminal simulation) Jitter, MOS,...
Interface options
xDSL Bonding-Module* KECT copper qualifying up to 31 MHz and DMM KECT1 copper test interface: SHDSL 8 wire interface* TDR fault detection / localization Qualifying up to 30 MHz with DMM and TDRKECT copper qualifying up to 31 MHz and DMM ISDN BRI U / S / POTS interfacek0 0
TDR fault detection / localizationSFP-Port for copper, fiber (second GbE-Port) or GPON (ONT), Transceiver optional*ISDN BRI U / S / POTS interfacek0 0
ISDN PRI S2M Interface*
Test interfaces G.FAST, VDSL2, ADSL 1/2/2+ with autodetectionEthernet 10/100Ethernet 10/100/1000
Webbrowser applicable for test VDSL2, ADSL 1/2/2+interfaces Ethernet 10/100
G.FAST ITU-TG.9700/9701 ITU-TG.9700/9701
DSL parameters Maximum attainable bit rates Attenuation/bin (Hlog/bin), QLN/bin, SNR/bin Maximum attainable bit ratesActual achieved bit rates Vendor code, revision Actual achieved bit ratesActual bonded achieved rates Interleave depth Capacity (%)Latency modes: fast, interleaved Interleave delay Signal-to-noise ratio (SNR) marginData modes: ATM, PTM INP Output power, AttenuationCapacity (%) G.INP Bits/bin, (Hlog/bin), QLN/bin, SNR/binSignal-to-noise ratio (SNR) margin Vectoring Vendor code, revisionOutput power Modes: PTM, ATM LOS, FEC, CRC, HEC; LOF, LPR, LPOAttenuation LOS, FEC, CRC, HEC, LOF, LOM, SES, ES LATN per band, SATN per bandBits/bin LATN per band, SATN per band
*More
info
rmatio
n a
nd a
vaila
bili
ty o
n r
equest
Display 3,5" TFT Display, RGB 240 x 320 3" LCD Display with backlight, 64 x 128
Dimensions 230 x 110/90 x 70 mm
Housing Impact-resistant ABS case with protective and high impact plexiglass as display cover
Menu languages G, E, F, IT, NL (others on request) G, E, F, IT, ES, POR, NL
Power supply LiPo battery with approximately 4 hours operation at full load mode
Weight 820 g 800 g 740 g
Specifications
Comparison sheet xDSL Tester KE3600MULTITEST
KE3500MULTITEST
KE3400BxDSL TEST
ADSL-ADSL2+, Annex A/B/J/L/M n n n
VDSL2 incl. Vectoring (ITU-T G993.5), Profiles 8a/b/c/d, 12 a/b, 17a o n o (no Vectoring)
G.FAST incl. autodetection of ADSL-VDSL-Vectoring-G.FAST lines o o –
GbE-Port for HTTP and FTP Up/Download tests up to 700 MBit/s n n –
DSLAM Mode – – n
Triple Play Test: VoIP (terminal simulation, VoIP phone) o o –
Triple Play Test: IPTV (Set Top Box emulation) o o –
ISDN S0-TE / POTS (telephone, BERT, ISDN services, with speakerphone) o o –
POTS (analog telephone with speakerphone) o o –
Copper tests (Telco Line Multimeter and xDSL line qualifying up to 31 MHz) o KECT o KECT o KECT1
TDR Measurements (fault location and length measurement) o o n (with KECT1)
SFP-Gigabit-Ethernet (fiber or copper) o – –
GPON-SFP-Port (ONT emulation) o – –
xDSL Bonding (ITU-T G.998.1/2/3 Bonding, Bandplan 30) o – –
SHDSL (2- to 8-wire interface) o – –
S2M interface o – –
Future-proof modular technology n – –
Multi-tasking tests (same time multiple tests without synchronization loss) n n –
Rugged, water-resistant housing with protective case n n n
High-performance LiPo battery for extended field-use n n n
Sunlight-readable display n (Color TFT) n (Color TFT) n (LCD)
PC software for measurement reports n n n
Mühleweg 11 Tel. +49(0)7121-97 55-0D-72800 Eningen u. A. Fax +49(0)7121-97 55 56GERMANY info@kurthelectronic.de
KURTH ELECTRONIC GmbH
www.kurthelectronic.de
Your Dealer
®
GbE
DSLVectoring
AnnexA/B/J/L/M
DSLAM
VoIP
IPTV
ISDNPOTS
POTS
30 MHzCopper
Test
SFP
GPON
SHDSL
S2M
DSLBonding
R
TDR
03/1
4 P
roduct
desi
gn a
nd s
peci
ficatio
ns
subje
ct to c
hange w
ithout notic
e. A
ll tr
adem
ark
s belo
ng to their r
esp
ect
ive c
om
panie
s.
n standard o optional available – not available
G.fastready
top related