aluminium rollers
Post on 26-May-2022
4 Views
Preview:
TRANSCRIPT
MADE IN ITALY
ALUMINIUM ROLLERS
Alveolar aluminium rollers, diameter 60mm to 250mm (natural or anodized). Roller manufacturing will be completely based on customer's drawings. The rollers can be supplied with stainless steel heads or pins. Viable options: heat, galvanic, silicone treatments and on-request coatings.
PR
OD
UC
TIV
E
1 4
2 6 2.1 62.2 62.3 7
3 8 3.1 83.2 9
4 10 4.1 104.2 11
5 12 5.1 12
6 13 6.1 136.2 136.3 146.4 157 16 7.1 167.2 167.3 177.4 17
10 21 10.1 2110.2 2110.3 2110.4 21 22
11 24
8 18 8.1 198.2 198.3 198.4 19
9 20 9.1 209.2 20
IDLE ROLLERS WITH BEARING HOUSING DESCRIPTION HEADS ASSEMBLY
IDLE ROLLER WITH PLASTIC HEADS DESCRIPTION
SPECIAL APPLICATIONS ASSEMBLY OF PIN AND LOCKING SET MOUNTING WITH ZA TYPE LOCKING RING FOR 20/25/30 DIAMETER SHAFTS COOLED ROLLER SPECIAL ROLLER
ROLLBLOCK ROLLBLOCK TECHNICAL SHEET ADVANTAGES APPLICATIONS WEIGHTREQUEST/ORDER FORM
MATERIAL INFORMATION
SURFACE MACHINING SURFACE TURNING SPIRAL GROOVING RADIAL DRILLING SURFACE BRUSHING
SPECIAL STORAGE BEARING ASSEMBLY BEARING MOUNTING THROUGH-SHAFT DOUBLE-BEARING PINS
SURFACE TREATMENTS AND COATINGS SURFACE TREATMENTS SPECIAL COATINGS
IND
EX
PROFILES
TECHNICAL INFORMATION LOAD AS A FUNCTION OF ROLLER TENSION DEFLECTION AS A FUNCTION OF LOAD P LOAD AS A FUNCTION OF DEFLECTION
VERSIONS WITH FIXED PINS DESCRIPTION PINS ASSEMBLY
4 |
1
B
S3
A
6x60°
S2 S1
4 | 5
PR
OF
ILE
S
* ATTENTION! DIAMETER 60: 8 SLOTS.
- Roughness of natural surface Ra=3,2 µm- Roughness of anodized surface Ra=1,6 µm
D
E
F
C
1 2 3 4
B
A
321 5
C
D
4 6 7 8
A
B
DATA
DATA: 15/02/2018DISEGNATO
APPROVATO
TRATTAMENTO SUPERFICIALE (surface �nishing):
REVISIONI
MATERIALE (material):
DESCRIZIONE (Description)
N. DISEGNO (n° drawings)
SCALA:1:1 FOGLIO 1 DI 1
A3
PESO: kg
NOME CLIENTE
gg/mm/aaaa xx
QUOTE SENZA TOLLERANZA SPECIFICA UNI EN22768 -mK(dimension without speci�c indication UNI EN22768 - mK)raggi non quotati R=0.5(radius without indication r=0.5 mm)smussi non quotati 1x45°(edges without indication 1x45°)
Note:xx
B A
All the information refer to standard profile, supplied with anodized surface. On request, FAIT supplies the roller balanced, coated and with rubber coverings. FAIT supplies bars in length up to 7 meters. Upon request, FAIT manufactures them on customer's design.
f = Deflection (mm)P = Load equally distributed (daN) + own weight (daN)ℓ = Roller length (m)
Ø A mm 60 75 81 HD 85 100 100/5 120 140 160 L 160 200 250
Tolerance mm ± 0,2 ± 0,2 ± 0,15 ± 0,2 ± 0,2 ± 0,25 ± 0,3 ± 0,3 ± 0,3 ± 0,4 ± 0,5 ± 0,8
Ø B 27 40 45 40 45 45 60 60 46 70,2 108 108
S1 2,5 2,5 3 2,5 2,5 3 4 3,5 3,5 4 4 5
S2 2 2,2 3 2,5 2,5 5 3 3,5 3 4 4 5
S3 1,8 2 2 2,5 2,5 3 3 3,5 3 4 4 4
Weight Kg/m 2,101 2,687 3,61 3,277 4,040 6,200 6,302 7,862 7,970 10,357 13,900 19,190
Elasticitymodulus DaN mm2
6900 6900 6.900 6900 6900 6900 6900 6900 6900 6900 6900 6900
Max non-concentricitymax. mm
0,2 0,2 0,15 0,2 0,2 0,3 0,4 0,4 0,4 0,4 0,6 0,6
Linearitymm/m 0,2 0,2 0,2 0,3 0,3 0,3 0,4 0,4 0,4 0,4 0,6 0,6
Jx mm4 205.030 464.844 765.729 744.040 1.260.567 2.043.500 2.735.130 4.778.660 6.078.090 8.167.180 17.455.670 37.910.050
Deflection mm
p.ℓ3 / 110
p.ℓ3 / 250
p.ℓ3 / 390
p.ℓ3 / 400
p.ℓ3 / 670
p.ℓ3 / 981
p.ℓ3 /1400
p.ℓ3 /2495
p.ℓ3 / 2720
p.ℓ3 / 4330
p.ℓ3 / 8950
p.ℓ3 / 20140
6 |
10
100
1'000
10'000
250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000
Ø 60
Ø 60
Ø 75
Ø 75
Ø 85
Ø 100Ø 81 HD
Ø 100
Ø 81 HD
Ø 100/5
Ø 100/5
Ø 120
Ø 120
Ø 140
Ø 140
Ø 160
Ø 160 L
Ø 160
Ø 160 LØ 200
Ø 200
Ø 250
Ø 250
Carico [DaN]
Lunghezza[mm]
Ø 85
6 | 7
2.1
D
E
F
C
1 2 3 4
B
A
321 5
C
D
4 6 7 8
A
B
DATA
DATA: 15/02/2018DISEGNATO
APPROVATO
TRATTAMENTO SUPERFICIALE (surface �nishing):
REVISIONI
MATERIALE (material):
DESCRIZIONE (Description)
N. DISEGNO (n° drawings)
SCALA:1:1 FOGLIO 1 DI 1
A3
PESO: kg
NOME CLIENTE
gg/mm/aaaa xx
QUOTE SENZA TOLLERANZA SPECIFICA UNI EN22768 -mK(dimension without speci�c indication UNI EN22768 - mK)raggi non quotati R=0.5(radius without indication r=0.5 mm)smussi non quotati 1x45°(edges without indication 1x45°)
Note:xx
B A
FIGURA 21
FIGURA 23
FIGURA 21
FIGURA 23
2.2
2Load P related to tension T and angle of tension
Fig. 2.1
Angle α 10° 20° 30° 40° 50° 60° 70° 80° 90°
0,174 0,347 0,518 0,684 0,845 1 1,147 1,286 1,414
Angle α 100° 110° 120° 130° 140° 150° 160° 170° 180°
1,532 1,638 1,732 1,813 1,879 1,932 1,970 1,992 2
P = Load on the roller (daN); T = Tension of material (daN); α = Angle of tension (°)
TE
CH
NIC
AL
INF
OR
MA
TIO
N
Deflection as a function of load P
P = Load distributed on roller (daN) + own weight (daN); ℓ = Roller length; f = Deflection (mm).
Fig. 2.2
Deflection = 204,03 x (1,5)3 ≅ 2,75 mm 250
P = 200 x 1 = 200 daNWeight = 1,5 x 2,687 = 4,03 Kg = 4,03 daNPtot = 200 + 4,03 = 204,03Given the load Ptot acting on the roller, you can estimate deflection.
EXAMPLE
You want to know the deflection on a 1.5 meter long roller (diameter 75) carrying ribbon material whose tension is 200 daN set at a winding angle of 120° on the roller (Fig. 2.3).
Load Ptot on the roller; sum of the weight of the roller and the load of the ribbon material.This will be α = 60° and therefore = 1
Fig. 2.3
Determining load P as a function of tension T and of the angle of tension αP = T • The values of tension of material α in the following table.
Ø A mm 60 75 81 HD 85 100 100/5 120 140 160 L 160 200 250
Jx mm4 205.030 464.844 765.729 744.040 1.260.567 2.043.500 2.735.130 4.778.660 6.078.090 8.167.180 17.455.670 37.910.050Elasticitymodulus DaN mm2
6900 6900 6900 6900 6900 6900 6900 6900 6900 6900 6900 6900
Deflection mm
p.ℓ3 / 110
p.ℓ3 / 250
p.ℓ3 / 390
p.ℓ3 / 400
p.ℓ3 / 670
p.ℓ3 / 981
p.ℓ3 /1400
p.ℓ3 /2495
p.ℓ3 / 2720
p.ℓ3 / 4330
p.ℓ3 / 8950
p.ℓ3 / 20140
10
100
1'000
10'000
250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000
Ø 60
Ø 60
Ø 75
Ø 75
Ø 85
Ø 100Ø 81 HD
Ø 100
Ø 81 HD
Ø 100/5
Ø 100/5
Ø 120
Ø 120
Ø 140
Ø 140
Ø 160
Ø 160 L
Ø 160
Ø 160 LØ 200
Ø 200
Ø 250
Ø 250
Carico [DaN]
Lunghezza[mm]
Ø 85
2.3
10
100
1'000
10'000
250 500 750 1000 1250 1500 1750 2000 2250 2500 2750 3000 3250 3500 3750 4000 4250 4500 4750 5000
Ø 60
Ø 60
Ø 75
Ø 75
Ø 85
Ø 100Ø 81 HD
Ø 100
Ø 81 HD
Ø 100/5
Ø 100/5
Ø 120
Ø 120
Ø 140
Ø 140
Ø 160
Ø 160 L
Ø 160
Ø 160 LØ 200
Ø 200
Ø 250
Ø 250
Carico [DaN]
Lunghezza[mm]
Ø 85
Length(mm)
Load(daN)
Load in daN for 0,1% deflections of the length between supportsEXAMPLE L = 1500 Deflection = 1,5 mm
Deflection is proportional to the applied load. For example, if there is a double deflection compared to that shown in the table, you will get a double load and so on.
EXAMPLE
You want to know the load generating a max. deflection of 4 mm on a 1.5 meter Ø 100 roller, cut across diameter 100 curve with the 1500 mm axis, you will get a value just under 300 daN.
At this load, you will get a deflection of 0.1% of the overall length. The requirement was having a deflection of 4 mm, therefore the load will be P = 300 ÷ 1,5 ∙ 4 ≅ 800 daN.
Calculating any deflection for the final load, you will get 4.06mm.Note: the graph is in a base-10 logarithmic scale and considers the weight of the roller.
Fig. 2.4
Load as function of deflection
8 |8 |8 |
3.1
9
3V
ER
SIO
NS
WIT
H F
IXE
D P
INS
Upon request, FAIT supplies pecial pins (i.e. browning or galvanized ones).
Upon request, key-grooved rollers can be supplied.
Caps can be suitable up to 120 diameter, in aluminium or stainless steel (when clearly declared).
Upon request, FAIT performs a statical/dynamic balancing (6.3 balancing grade). If the number of turns is not declared, dynamic balancing is 300 RPM.
Description
Fig. 3.1
Fig. 3.2
disegno con traccia 0,5
disegno con traccia 0,416 per il catalogo che ha il disegno inserito al 120%
A-A
A
A
3.2
Pin + plastic cap, suitable forØ 60, Ø 75, Ø 85, Ø 100, Ø 120.
Fig. 01.01
Pin + aluminum cap, suitable for all diameters.
Pin + seeger-blocked aluminium caps. Option for balanced and/or coated rollers.
Fig. 01.02 Fig. 01.03
Pins assembly.
Fig. 01
Fig. 01.04
Pin with aluminum cap and fixing screws. Option for rollers working in environment whose temperature is more than 100 degrees.
Pins assembly
10 |10 |10 |
4.1
Fig. 4.1 Testata norma le
E
FD
B
Fig. 4.2 Testata ridotta
F
2,5
E
11
4
IDLE
RO
LLE
RS
WIT
H B
EA
RIN
G H
OU
SIN
G
MATERIAL: STEEL OR ALUMINUMThe smaller head, for diameter larger than 100mm, is aimed at reducing roller weight. Natural option can be supplied upon request for all diameters.
Customer's requirement with burnished or galvanic-plated treatments. If not clearly declared, head will not have any surface treatment.
FAIT performs housing heads according to customer's drawing.
Upon request, FAIT performs a statical/dynamic balancing (6.3 balancing grade). If the number of turns is not declared, dynamic balancing is 300 RPM.
Bearing 620215x35x11
620317x40x12
620420x47x14
620525x52x15
600630x55x13
620630x62x16
620735x72x17
620840x80x18
620945x85x19
621050x90x20
B mm 15 18 18 (Ø 60)22 for others Ø 22 22 22 22 25 (Ø 100-120-140)
18 (Ø 200-250) 18 18
D mm SAME AS EXTERNAL DIAMETER OF ROLLERE mm 11 12 14 15 13 16 17 18 19 20Ø F mm 35 H7 40 H7 47 H7 52 H7 55 H7 62 H7 72 H7 80 H7 85 H7 90 H7
Fig. 4.1 Normal head. Fig. 4.2 Smaller head. Fig. 4.3
Description
Type of head Normal Smaller
Ø roller 60 75 - 85 81 HD - 100 - 100/5 - 120 - 140 81 HD - 100 - 100/5 - 160 L 120 - 140 160 200 250
Recommended bearings
620262036204
620462056206
62056206620762086006
62026203
6204620562066006
62056206
620862096210
6208620962106212
A
A
SI ESEGUONO SOLUZIONI SPECIFICHE A DISEGNO DEL CLIENTE
disegno con traccia 0,5
disegno con traccia 0,416 per il catalogo che ha il disegno inserito al 120%
A
A
SI ESEGUONO SOLUZIONI SPECIFICHE A DISEGNO DEL CLIENTE
4.2
A
A
SI ESEGUONO SOLUZIONI SPECIFICHE A DISEGNO DEL CLIENTE
Standard head.
Fig. 02.01
Standard head and internal seeger.
Fig. 02.02
Heads assembly.
Fig. 02
Smaller head + plastic cap, suitable for Ø 60, Ø 75, Ø 85, Ø 100, Ø 120.
Fig. 02.03
Smaller head + aluminum cap, suitable for all diameters.
Fig. 02.04 Fig. 02.05
Smaller head + seeger-blocked aluminium cap. Option for balanced and/or coated rollers.
Fig. 02.06
Embed head.
Fig. 02.07
Plastic head. Up to diameter Ø 120.
Fig. 02.08
Smaller head with aluminum cap and fixing screws. Option for rollers working in environment whose temperature is more than 100 degrees.
As described on page 12.
Fig. 02.09
Custom-designed smaller head.
A-A
Heads assembly
12 |
disegno con traccia 0,5
disegno con traccia 0,297 e 0,06per il catalogo che ha il disegno inserito al 168%
5.1
D F
GB
Fig. 5.1
D F
GB
Fig. 5.1
13
5ID
LE R
OLL
ERS
WIT
H P
LAST
IC H
EAD
S
Fig. 5.1
MATERIAL Heat stabilised combination of polyamide 6 reinforced with the addition of 30% glass fibre. Technopolymer heads can be up to 80% lighter than standard options. They have been designed for double bearings option.Warning! They work properly up to 110 degrees.
HEAD WEIGHTØ 60 Ø 75 Ø 85 Ø 100 Ø 100/5 Ø 120
gr. each 40 80 100 130 130 220
Upon request, FAIT performs a statical/dynamic balancing (6.3 balancing grade). If the number of turns is not declared, dynamic balancing is 300 RPM.
Description
Housing Ø 60 Ø 75 Ø 85 Ø 100 - 100/5 - 120Bearing 6204 - 6303
20x47x14 - 17x47x146205 - 6304
25x52x15 - 20x52x156205 - 6304
25x52x15 - 20x52x156206 - 6305 - 6007
30x62x16 - 25x62x17 - 35x62x14
B mm 23 24 25 25
D mm SAME AS EXTERNAL DIAMETER OF ROLLERF mm 47 52 52 62G mm 14 19 19 20
disegno con traccia 0,5
disegno con traccia 0,297 e 0,06per il catalogo che ha il disegno inserito al 168%
6.1
6.2
6 S
PE
CIA
L S
TO
RA
GE
Idle roller with bearings and ABU ring. Suitable for through shaft.
Idle pin with double bearings.
Fig. 6.1 Fig. 6.2
SECTION A-A
DETAIL BDETAIL A
Upon request, FAIT performs a statical/dynamic balancing (6.3 balancing grade). If the number of turns is not declared, dynamic balancing is 300 RPM.
Bearing assembly
Bearings option
BA
Ø 60 Ø 75 - 85 Ø 81 HD - 100 - 100/5 - 160 L Ø 120 - 140 Ø 160 Ø 200 - 250
Bearing
6001(12x28x8)
6004(20x42x12)
6204(20x47x14)
6206(30x62x16)
6306 (30x72x19)
6408(40x110x27)
6902(15x28x7)
6302 (15x42x13)
6005(25x47x12)
6305(25x62x17)
6207 (35x72x17)
6310(50x110x27)
6905(25x42x9)
6303(17x47x14)
6007(35x62x14)
6910 (50x72x12)
6212(60x110x22)
6906(30x47x9)
6908(40x62x12)
14 |
ASSIEME ASTA PASSANTE
disegno con traccia 0,5
disegno con traccia 0,416 per il catalogo che ha il disegno inserito al 120%
disegno con traccia 0,322 per il catalogo che ha il disegno inserito al 155%
A
A
15
ASSIEME ASTA PASSANTE
disegno con traccia 0,5
disegno con traccia 0,416 per il catalogo che ha il disegno inserito al 120%
disegno con traccia 0,322 per il catalogo che ha il disegno inserito al 155%
6.3
Standard head.
Fig. 03.01
Through-shaft.
Fig. 03
Fig. 03.02
Smaller head + plastic cap, suitable for Ø 60, Ø 75, Ø 85, Ø 100, Ø 120.
Smaller head + aluminum cap, suitable for all diameters.
Fig. 03.03
Smaller head + aluminium cap seeger-blocked. Option for balanced and/or coated rollers.
Fig. 03.04
Embed head.
Fig. 03.05
Plastic head. Up to diameter Ø 120.
Fig. 03.06
Bored roller.
Fig. 03.07
A-A
Fig. 03.08
Smaller head with aluminum cap and fixing screws. Option for rollers working in environment whose temperature is more than 100 degrees.
Seeger-blocked shaft.
Fig. 03.S
Through-shaft
ASSIEME ASTA PASSANTE
disegno con traccia 0,416 per il catalogo che ha il disegno inserito al 120%
6.4
Double bearings assembly.
Fig. 04
Double bearings and standard head.
Fig. 04.01
Double bearings and smaller head + aluminum cap, Ø 200, Ø 250.
Fig. 04.02Double bearings and smaller head + aluminum cap, Ø 200, Ø 250. Option for balanced and/or coated rollers.
Fig. 04.03
Double bearingsand bored roller.
Fig. 04.04
Double bearings pins
16 |
7.2
7.1
17
SEEGER ZA***
A disegno con traccia 0,5
disegno con traccia 0,344 per il catalogo che ha il disegno inserito al 145%
CL800
disegno con traccia 0,5
disegno con traccia 0,344 per il catalogo che ha il disegno inserito al 145%
CL700
7
disegno con traccia 0,5
disegno con traccia 0,2 per il catalogo che ha il disegno inserito al 200%d
SPEC
IAL
APP
LIC
ATI
ON
S
Mounting of the locking set.
Fig. 7.1
* Please, ask to FAIT's technical department.
Assembly of pin and locking set
Mounting with ZA type locking ring for 20/25/30 diameter shafts
***Self locking ZA type ring for d=20/25/30 diameter shafts. Mounted via pressure. It cannot be removed.
DETAIL A
7.3
7.4
Mounting with ZA type locking ring for 20/25/30 diameter shafts
CONNECTION FOR ROTARY COUPLING
CONNECTION FOR ROTARY COUPLING
Cooled roller
Special roller
18 | 19
8.3
8.4
8.1
8.2
2.8/3.0 0.3
2.8/3.0 0.3
8SU
RFA
CE
MA
CH
ININ
G
Upon request, FAIT performs surface turnings to improve roller concentricity and linearity.
Upon request, FAIT performs also grooves(pitches: 25mm).
FAIT performs radial drillls according to customer's design drawing.
Upon request, FAIT performs surface brushing for natural rollers. It makes roller surface more regular and slightly opaque.
* Please, ask to FAIT's technical department for not-standard pitches.
Radial drilling
Surface brushing
Surface turning
Spiral groove
Fig. 8.2
STANDARD GROOVE 25/50
20 |
9.2
9.1
21
9SU
RFA
CE
TREA
TMEN
TS A
ND
CO
ATI
NG
S
Special coatings for rollers include Rollstrip rubber coverings or natural/synthetic rubber.
FAIT performs also:
- Hard anodising;- Teflon coating;- Plasma coating;- Vulcanized rubber-coating.
Rubber strip "ROLLSTRIP"
Special Coatings
Surface treatments
Fig. 9.3
10.1
10.2
10.4
10.3
Ø d
L2 L L3L1
BLOCK 10
RO
LLB
LOC
K‹ P
ATEN
TED
›
Safety chuck.
Fig. 10.1
Self-locking bar for cardboard tubes measuring 3'' ( Ø int. 76).
Less Weight No Compressed airCustom made pins
Kg 2,900 for meter, 3'' length.
Textile IndustryTanning IndustryPaper IndustryPackaging Industry
Rollblock technical sheet
Advantages
Weight
Applications
CARDBOARD TUBES
22 |
ØE
ØD
ØE
ØD
L
L
Ø =
BC B C
Ø Ø ØØ =
Ø
ØE
ØD
ØE
ØD
L
L
Ø =
BC B C
Ø Ø ØØ =
Ø
23
ORDER
STANDARD SIZED JOURNALS
FORMS
CUSTOM-DESIGNED PINS
FEATURES
SURFACETREATMENT NORMAL ANODIZED OTHER
BALANCING YES NO
COATING NONE
RPM REVS/MINUTE
CUSTOMER INFORMATION
CUSTOMER
QUANTITY
PRICE
DELIVERY
NOTE
Ø 60 Ø 75 Ø 81 HD - 85 Ø 100 - 100/5 Ø 120 - 140 Ø 160 L - 160 Ø 200 - 250
B (mm) 20 30 30 30 30 30 20
C (mm) 40 120 120 120 120 120 60
D (mm) 17-20-25 20-25 20-25-30 25-30 30-35 30-35 30-35-40
E (mm) 25 40 40 40 50 50 50
L tot =
L cilindro =
Ø Ø
Ø
L
Ø
L tot =
L cilindro =
Ø Ø
Ø
L
Ø
ORDER FORMS
CUSTOM-DESIGNED HEADS
FEATURES
SURFACE TREATMENT NORMAL ANODIZED OTHERBALANCING YES NOCOATING NONEHEAD NORMAL SMALLERLOCK SEEGER ABURPM REVS/MINUTE
CUSTOMER INFORMATION
CUSTOMER
QUANTITY
PRICE
DELIVERY
NOTE
BEARING HOUSING STEEL ALUMINIUM TECHNOPOLYMER
TYPE OF HEAD NORMAL SMALLERBEARING Ø AXLE BEARING Ø AXLE
Ø 60 6202 - 6203 - 6204 15 - 17 - 20Ø 75 - 85 6204 - 6205 - 6206 20 - 25 - 30
Ø 81 HD - 100 - 100/5 - 160 L 6205 - 6206 - 6207 - 6208 25 - 30 - 35 - 40 6202 - 6203 15 - 17Ø 120 - 140 6205 - 6206 - 6207 - 6208 25 - 30 - 35 - 40 6204 - 6205 - 6206 20 - 25 - 30
Ø 160 6205 - 6206 - 6007 25 - 30 - 35Ø 200 - 250 6208 - 6209 - 6210 40 - 45 - 50
24 | 25
11
AUTO
GENO
US:
GOO
D
HETE
ROGE
NEO
US:
GOO
D
ELEC
TRIC
AL A
RESI
STAN
CE:
GOO
D
INDU
STRI
AL:
FRO
M S
UFFI
CIEN
T
URBA
N-RU
RAL:
GOO
D
MA
TE
RIA
L IN
FO
RM
AT
ION
GENERAL PHYSICAL FEATURES OF ALLOY (APPROXIMATE VALUES)
SPECIFIC WEIGHT 2,70 Kg/dm3 LINEAR COEFFICIENT OF THERMAL EXPANSION
INFINITE MELTING POINT 600° C from 20 to 100°C 23x10-6 °K -1
SPECIFIC HEAT AT 100° C 890 J/Kg °K from 20 to 200°C 24x10-6 °K -1
THERMAL CONDUCTIVITY AT 20° C from 20 to 300°C 25x10-6 °K -1
R VALUE 0,50 cal s -1 cm -1 °C -1 RESISTIVITY AT 20°C
TA VALUE 0,42 cal s -1 cm -1 °C -1 R VALUE 3,14μΩ•cm
TA VALUE 3,25μΩ•cm
ELASTIC MODULUS 6900 Kg/mm2
EXTRUSIONS
AS DELIVERED CONDITION CROSS SECTION THICKNESS
TENSILE STRENGTH
INR Kg/mm2
MECHANICAL FEATURES
BRINELL HARDNESS
Kg/mm2NAME SYMBOL Max mm3 5 mmYIELD POINT
INR Kg/mm2
ELONGATIONA - X
RAW EXTRUSION MATERIAL
RAP
1200012000
--
9-1412-18
5-87-12
20-3016-25
30-4530-45
ToN RECOVERED ToN 12000 - 14-18 8-14 16-20 35-50
ToA RECOVERED ToA - Up to 12Up to 8
19-2621-27
15-2117-20
11-1812-18
50-7060-80
TA16 RECOVERED TA16 - Over 8 and
up to 12 20-26 16-22 12-18 60-80
TECHNOLOGICAL FEATURES
ALLOY 6060 PLASTICITY FEATURES
MACHININGFEATURES
POLISHINGFEATURES
WELDINGFEATURES
RESISTANCE TO THE ELEMENTS
REACTION TO ANODIC
OXIDISATION
R GOOD POOR POOR GOOD*HP GOOD POOR POOR GOOD*TN GOOD POOR POOR GOOD**ToN GOOD POOR POOR GOOD**ToA POOR GOOD GOOD GOOD**TA16 POOR GOOD GOOD GOOD**
CHEMICAL COMPOSITION PERCENTAGE
CUmax
FEmax Mg SI Mn
maxZn
maxTI
maxCr
maxOVERALL IMPURITY
excludingFe e Ti max
ALREMAINDER
HYPOTHETICAL ALLOY - - 0,45 0,45 - - - - - -
IN SEMI-FINISHED PRODUCTS 0,10 0,35 0,38 - 0,5 0,35 - 0,5 0,1 0,1 0,1 0,1 0,3 REMAINDER
HeadquartersFAIT Group SpAVia Scarpettini, 367-369
59013 Oste Montemurlo (PO) Italy
Tel. +39 0574 68121
Fax +39 0574 681262
info@faitgroup.it
Filiale di MilanoFAIT Group SpAVia Talamoni, 57
20861 Brugherio (MB) Italy
Tel. +39 02 26708477
Fax +39 02 26708887
infomilano@faitgroup.it
GermanyFAIT De GmbHGerd Schäfer (Vertretung D/AT/CH)
Tel. +49 (0) 7151-33011
Fax. +49 (0) 7151-33063
Mobile: +49 (0) 151-25307794
g.schaefer@faitgroup.it
MAGGIO - MAY - KANN 2020
top related