aluminium anodizing technologydefoaming systems for application in waste water and rinsing...
Post on 27-Mar-2020
13 Views
Preview:
TRANSCRIPT
AL
UM
INIU
M
A
NO
DIZ
ING
TE
CH
NOL
OGY
CH
EMIC
ALS
, PR
OC
ESSE
S, E
QU
IPM
ENT
ALU
MIN
IUM
A
NO
DIZ
ING
TE
CH
NO
LOGY
ALUMINIUM
ANODIZING
TECHNOLO
GY
The Company Since 1967 we have been producing specialized chemicals, planning and supplying anodizing lines and technical components for the surface treatment of aluminium. We offer you products of highest quality, expertise and high-performance service. The foundation of our common success has always been the faithful and reliable cooperation with our partners.
Metall- und Oberflächenchemie Sperzel GmbH
With creativity and experience we develop innovative products and optimize established concepts.Our company is certified according to DIN EN ISO 9001/DIN EN ISO 14001 quality/environmental management. The use of approved raw materials, continuous process control and the application of state-of-the-art production technology guarantees the constant high quality of our end products.
ALUMINIUM ANODIZING TECHNOLOGY CHEMICALS, PROCESSES, EQUIPMENT
PRODUCING QUALITYTHINKING INNOVATIVELY
Metall- und Oberflächenchemie Sperzel GmbH
We highly appreciate working in partnership to develop tailor-made solutions. Our sophisticated team of customer consultants and technicians generates cost effective concepts to optimize your process- and production-technology and supports the economical application of products. Highest quality and perfect surfaces are our passion.
FINDING SOLUTIONSSUPPORTING PROCESSES
ALUMINIUM ANODIZING TECHNOLOGY
E6-Etching by Al 5000 Chemical Brightening by Luxal® G
CHEMICALS AND PROCESSES
Alkaline and acidic high-performance degreasers for aluminium as liquids and powders are also available borate-free. All cleaners conform to the requirements of the detergent directive regarding biodegradability of surfactants.
Liquid additive for E0-Etch processes for the pre-vention of stone formation and stabilization of the aluminate solution.
Ready-made etch additive-series for creating decorative surfaces according to DIN 17611/E6. The Al 3000-/Al 4000-additives contain all required components as one-pack-solution for the E6-Etch process.
Liquid long-life etch additive for creation of deco-rative surfaces according to DIN 17611/E6. Redu-ced metal weight loss, excellent matting, superior rinsing properties, outstanding bath stability.
Liquid long-life etch additives for creation of deco-rative surfaces according to DIN 17611/E6. Redu-ced foam formation, excellent drain out-efficiency, allow larger surfaces per load and prevent floating of racks.
The long-life etch additive Al 6500 S has the same properties as the Al 7000/Al 8000-series with the advanced ability to eliminate the negative effect of heavy metals (prevention of grain effect).
Degreasing
E0-Etching
E6-Etching
E 2000 Aluclin 12SAluclin 18SAluclin 12 FAC 87/88
Al 100F
Al 3000Al 4000
Al 5000
Al 7000Al 8000
Al 6500 S
Chemical Brightening by Luxal® G
Electro-Coloring by Metacolor® Stainless Chemical Brightening by Metalux 7
Die Etching
Desmutting
Chemical Brightening
Electro-Polishing
Metacolor®Electro-Coloring Processes
Maclin
Deox HDDeox RSH
Luxal® GMetalux 7Metalux 1
Metalux EL
Metaclear EL
Metacolor® Replenisher Solution MetaplusTin Sulfate
Metacolor®
Stainless
Additive for stabilizing the aluminate solution in die etches.
Additives for nitric acid-free removal of alloy residues in sulfuric acid-containing desmutting baths.
Ready-made one-pack-solutions for production of semi gloss- and high gloss-surfaces.
Ready-made one-pack-solution for production of electro-polished high gloss-surfaces.
Additive for clarifying bath after the electro-polishing process for removal of oxide skins and alloy residues.
Metacolor® coloring solutions, stabilizer systems and tin sulfate for achieving the shades C31-C35 by our two-step electro-coloring process.
Metal salt solutions and stabilizers for the eco-nomical production of stainless steel-colors on anodized aluminium surfaces.
ALUMINIUM ANODIZING TECHNOLOGY
Metacolor® Two-Step Electro-Coloring Process
CHEMICALS AND PROCESSES
Dye colors for creating premium colored aluminium surfaces persuade by excellent coloring attitudes and brilliant colors.
Dye stuff based on iron oxalate for gold coloring of aluminium surfaces.
Liquid additives for the optimal smut-free hot sealing of anodizing films, meeting the require-ments of effective quality standards. Analyzable, simple dosing, never-dump-systems.
Liquid and powdery one-component-products
for cold sealing of anodizing films with lightfast green shade-compensation.
Energy-saving dual step sealing-process for economical smut-free sealing of anodizing films, meeting the requirements of effective quality standards.
Special sealing processes for the production of acid- and alkaline-resistant anodizing films.
Dye Colors
Hot Sealing
Cold Sealing
Dual Step Sealing
Special Sealing Processes
Mineral Gold
Iso-seal®
Sealox®
Alisiel 11
K10 K10-P
PS41 Sealox® BR
K 14 PSealox® BR
Cold Sealing by K10Mineral Gold - Coloring
Additives Al-N Plus
Na-12 Z
Schaumal
Sealox® Plus
Metaflock
Antifoam FA
Antifoam AP
Fluid Protect R42
Elox-Plus
pH-Plus
Stabial/Delta VI
Wetting agent for alkaline long-life etch systems which improves the rinsing properties and drain out-efficiency, especially for profiles with narrow hollow sections. Also applicable as rinse aid for alkaline rinsing baths.
Foam cover for alkaline process baths.
Foam cover for acidic process baths.
High-performance wetting agent for hot sealing baths to prevent flow marks and drying spots.
Special flocculant for application in aluminium containing waste water.
Defoaming systems for application in waste water and rinsing processes.
Defoaming system for application in alkaline rinsing and alkaline degreaser processes, free of silicones.
Preserving agent for application in anodizing plants to prevent undesired degradation pro-cesses, formation of algae and fungus spores.
Elox-Plus allows anodizing at higher temperatu-res and with higher aluminium concentrations.
Additive for ammonia-free adjustment of the pH-value of cold sealing baths.
Additive for stabilizing aluminium hydroxide solutions during storage.
ALUMINIUM ANODIZING TECHNOLOGY
We plan anodizing plants for you and integrate additional processes into existing plants. Only premium-quality materials and durable components are used in order to economize your investment project.
Sealing Tank Tanks and Equipment for Chemical Polishing
ALUMINIUM ANODIZING TECHNOLOGYPLANT DESIGN AND COMPONENTS
MC-Ion Exchanger Clamping Device Chemical Polishing Tanks and Equipment for Chemical Polishing
Anodizing Plants
Waste Water Treatment
Ion Exchange Units
Exhaust Systems
Tanks
Power Supply Units
Cooling
Tank Heating Equipment
Electrode Systems
Contacting Systems
MC-Filtration Systems
Tailor-made solutions. Consultancy, configuration and design.
Consultancy, design and supply of treatment plants for waste water.
MC-Ion Exchangers remove nickel from rinse waterfully automatically. Also available as cartridge units with recycling service.
Exhausting units, suction channels, gas scrubbers.
Process tanks made of steel, stainless steel, special fiber glass, polyethylene, polypropylene, PVDF.
Alternating current transformers, direct/alternating current transformers,rectifiers.
Cooling units, heat exchangers, cooling towers.
Immersion heaters of stainless steel, glass, ceramic and PVDF incl. temperature control.
Electrode and cathode systems and their components for anodizing, electro-coloring and electro-polishing pro-cesses.
High-current finger contacts, mechanically or pneumati-cally driven.
Plate filter systems for filtration of coloring, cold sealing and hot sealing baths, filter systems for oil absorption and activated carbon-filters.
Laboratory Chemicals and Equipment Bath Covers
ALUMINIUM ANODIZING TECHNOLOGYTECHNICAL EQUIPMENT
Preservation and mechanical cleaning of anodized aluminium surfaces.
Solid materials, chemical and temperature resistant, also available with ceramic or titanium tips.
Covering balls with different diameters, made of HD-polyethylene or polypropylene.
Hexagonal solid floats for covering heated process baths.
Anodizing Cleaners
Metacolor® Repair Sprays Metacolor® Repair Paint Sticks
Anodizing Clamps
Bath Covers
Metamatik-Color Anodizing ClampsBath Covers
Consumables, standard solutions, titration automats, glassware, scales.
Film thickness, reflection, gloss, color.
Standard types, activated carbon, special papers.
Cathode covers, cathode bags for reduction of sul-furic acid-emissions during the anodizing process, tailor-made.
Special activated carbon for decoloration of aqueous solutions, especially for cold and hot sealing baths.
Metamatik-pHMeasuring and dosing unit for permanent pH-measure-ment and automatic pH-adjustment of nickel-containing process baths.
Metamatik-ColorMeasuring and dosing unit for automatic dosage of Metacolor® Replenisher Solutions for Metacolor® electro-coloring processes.
Full range of racks made of titanium.
Laboratory Chemicals and Equipment
Measurement Instruments
Filter Papers
Filter Cloth
Activated Carbon
Metamatik-Color
Titanium Racks
CHEMICALS, PROCESSES, EQUIPMENT
ALUMINIUM ANODIZING TECHNOLOGY
MC-Ion ExchangerStorage of Chemicals in Anodizing Works
Rinsing Process Chemical Brightening by Metalux 7
Metall- und Oberflächenchemie Sperzel GmbH
ALUMINIUM ANODIZING TECHNOLOGY CHEMICALS, PROCESSES, EQUIPMENT
Metall- und OberflächenchemieSperzel GmbHFreisenbergstraße 1858513 Lüdenscheid/GermanyPostfach/P.O. Box 22 6558472 Lüdenscheid/GermanyTel.: +49 (0) 23 51/ 95 99-0Fax: +49 (0) 23 51/ 95 99-99
E-mail: info@metachem.deInternet: www.metachem.de
This information is an excerpt from our range of performance. For more details kindly request elaborate tech-nical information about our products.
Our customer consultants and tech-
nicians will be pleased to be of assis-tance to you.
AL
UM
INIU
M
AN
OD
IZIN
G T
EC
HN
OL
OG
YC
HEM
ICA
LS,
PRO
CES
SES,
EQ
UIP
MEN
T
ALUMINIUM
ANODIZING
TECHNOLO
GY
ALU
MIN
IUM
A
NO
DIZ
ING
TE
CH
NO
LOGY
top related