a lanko 173 self skim- eng1 · 2019. 12. 28. · 7 days 20 28 days 30 flexural strength (mpa)...
Post on 14-Oct-2020
1 Views
Preview:
TRANSCRIPT
Fast Setting Interior FloorThickness : 3-8 mm.
- 8 mm.3
Floor & SurfaceProtection
SELF SKIM
A self-levelling mortar for old and new interior floors.
CHARACTERISTICS
DESCRIPTION
USES
WORK INSTRUCTIONS
PACKAGING
• 25 kg. bag.
COVERAGE
• 1.5 kg./sq.m./mm.
• 1 year from date of manufactureif stored in unopened originalpackaging in dry condition.
STORAGE
Surface Preparation
Primer Application
• Thickness 3 to 8 mm.
• Self-levelling.
• Smooth surface.
• Excellent bonding.
• Fast setting.
• Compatible with traditional floor covering.
• Interior floor.
• Substrates : mortar, concrete, precast.
• Floor covering material: paint, carpet, tile, wood floor, vinyl, rubber.
1. Substrates must be at least 28 days old.
2. Surface must be clean and without any trace of oil, laitance, curing
compound, damaged concrete or paint.
3. Damp the surface and wait at least 2 hours before application.
1. LANKO 162 FLOW PRIME should be applied as a primer to improve
adhesion and reduce air bubble.
2. Apply LANKO 162 FLOW PRIME. Wait until the primer is half dry
before pouring LANKO 173 SELF SKIM
THIN SELF-LEVELLING MORTAR THICKNESS
SELF SKIM | ENGLISH VERSION 10/60 1 |
Time before covering, at 7 mm. thick (day)
Adhesion to concrete (MPa) Evaluation
Evaluation
28 days > 1
Class of bending strength F7
Class of compressive strength C30
Compressive strength ASTM C109 (MPa)
3 days 15
7 days 20
28 days 30
Flexural strength (MPa)
Abrasion resistance
Evaluation
3 days 6
7 days 7
28 days 8
Evaluation
Taber abrasion, H22 disk-500g-200 rmp
7 days 39
28 days 1
Carpet, ceramic tiles > 3 daysVinyl sheeting, rubber > 3 daysParquet > 3 days
Floor paint > 7 days
Evaluation
Time before covering, at 3 mm. thick (day) Evaluation
Carpet, ceramic tiles > 3 days
Vinyl sheeting, rubber > 3 days
Parquet > 3 days
Floor paint > 7 days
Product Preparation
Application
Jointing
PRECAUTIONS
SPECIFICATIONS
Particle size (mm.) : 0-2
Bulk density (kg./L.) : 1.3-1.4
Good flow up to Healing (min.) : 50
Pot life (min.) : 30
Open to light traffic (Hours) : 5-8
SELF SKIM | ENGLISH VERSION 10/60 2 |
094 551 5458 02 651 8003 parexgroup.co.th e-learning VDO
*The information provided in this document results from our knowledge of the products and our experience. On-site results may vary, in particular according to the product application methods adopted. Where application methods not representative test before using the products. The above-mentioned information in no way constitutes a warranty relative to the use of the products. Our general terms and conditions of sale shall prevail, in any event, on the information provided in this document. Prior to application, customers and users are requested to check that they have the lasted version of this document.
ParexGroup Company Limited. 183 Regent House Building, Rajdamri Road., Lumpini, Bangkok 10330
• Temperature range for use : 5Oc to 35Oc.
• Wear gloves and safety goggles.
1. Machine-mix LANKO 173 SELF SKIM 25 kg. bag
with 5.5-6 Litres (22-24%) of clean water. Mix for
3 minutes until the compound is evenly distributed.
2. Leave to stand for 1-3 minutes.
3. Do not add water after mixing.
1. Pour mixed mortar onto the prepared surface.
2. Level the surface with a stainless steel float or
screed board.
3. Spike roller can be used to remove air bubble after
floating.
1. Joints should be made to avoid large area of cracking.
2. Joints should be made by using a machine saw or
by laying a plastic tracking strip at a maximum length
of 8 metres or alight the joints with column.
3. joints should be aligned with existing joint.
top related