8 heating area

Post on 18-Jul-2015

96 Views

Category:

Documents

4 Downloads

Preview:

Click to see full reader

TRANSCRIPT

Heating Area

UFO infrared heaters, energy-intensive, people in the most efficient way, "Wavelength Radiation" have to. In addition, the infrared rays of the

angle mirror reflector is designed to deploy will bring the most distant target sites. UFO heaters formed in relation to distance from the table

below the temperature values are given in the open air.

Note: This tests the external ambient temperature of 19 ± 1 ° C, was carried out in the open air and wind. Outdoor conditions, and these values

may vary depending on the angle of the device connection. UFO etkilenmemesine heaters infrared rays from the wind or the outside temperature

in the wind, yet people still lose more heat. High heat loss when the installation is also a need to make more energy to heat occurs. UFO

ısıtıcılarınızın heating areas which would be if used outdoors and installation information on the distances shown in the table below. Heating

area, such as ambient temperature and wind force varies according to geographical conditions in the table to show min. and max. in the range

given.

NOTE: The B, C and D values, setting the windless 150 W / m², according removed. Heated by the ground state and wind conditions will

change these values. Breezy environment, ie, the table 300 W / m² in case of the adaptation of B, C and D, about 1/3 ratio decreases. The average

energy installation according to climatic conditions of Turkey 225W / m² can be taken.

top related