30m - conocophillips optimized cascade
Post on 29-Nov-2014
223 Views
Preview:
TRANSCRIPT
Ch. 30 - 166
The World of Energy
30.13. ConocoPhillips Optimized Cascade
Chapter 30 LNG Technology - Processes
Ch. 30 - 170
GasConditioning
100%
PropaneCycle100%
EthyleneCycle100%
MethaneCycle100%
Storage &Loading100%
Turbine/Compressor
50%
Turbine/Compressor
50%
Turbine/Compressor
50%
Turbine/Compressor
50%
Turbine/Compressor
50%
Turbine/Compressor
50%
Boil off Gas
Power Generation
Overall Plant Production Efficiency >95%
Operating Range (% of design)
Full Plant 80 105%
One Turbine Offline 60 80%
Three Turbines Offline**At least one turbine on each cycle must be operating
30 60%
Plant Idle 0 30%
COP Optimized Cascade LNG Process
Two-Trains-in-One Approach Maximum plant availability with operating flexibility
Ch. 30 - 171
PropaneRefrig. System
EthyleneRefrig. System
MethaneCompressor
VaporRecovery
LNG Storageand LoadingLIQUEFACTION
MarineFacilities
CondensateStabilization
CondensateStorage
Fuel GasDistribution
Plant Fuel
ShipVapors
LNG
to ShipNitrogenRejection
NitrogenCondensate
To Acid Gas Incinerator /
Trucks
Acid Gas Incineration
Feed
Gas
GasConditioning
Block Flow Diagram
Darwin LNG Project
Ch. 30 - 173
Values are representative
Turbine ShaftPower(kW) Efficiency
FuelConsumption
(Indexed)ScheduledDowntime
Frame 5D Dual 32,580 29.4% 100 2.6%
LM2500+ Dual 31,364 41.1% 72 1.6%
LM6000 Dual 44,740 42.6% 69 1.6%
Frame 7E Single 86,225 33.0% 89 4.4%
Frame 9E Single 130,100 34.6% 85 4.6%
The Optimized CascadeSM LNG Process
Representative Turbine Performance
Ch. 30 - 174
The Optimized CascadeSM LNG Process
Frame 7 Power
Frame 7 Heat
Rate
LM6000 Power
LM6000 Heat
Rate
50
60
70
80
90
100
110
120
0 10 20 30 40 50 60
Inlet Air Temperature (C)
Power and Heat Rate Index
(ISO=100)
Aeroderivatives are more sensitive to ambient conditions
Turbine Performance
Ch. 30 - 175
The Optimized CascadeSM LNG Process
Turbine(No. x Model)
Number of TurbinesBy Service
(Propane/Ethylene/Methane)
NominalTrain Size(MTPA)
6 x LM2500+ 2 / 2 / 2 3.5
8 x LM2500+G4 3 / 3 / 2 5
6 x LM6000 DLE 2 / 2 / 2 5
9 x LM6000 DLE 3 / 3 / 3 7.5
Aeroderivative Plant Configurations
Ch. 30 - 176
Phillips Cascade Process
Simple to design and operateSimple cycle Frame 5 gas turbines mechanical driveNo helper turbine or large motor needed for start-upIncreased size with two gas turbine trains for eachrefrigerant processParallel compressor trains avoids capacity limitsIncreased CAPEX due to more (six) trains offset by increased availability 95-96% with parallel train operationLoss of one train does not cause plant shut downProduction carries on with reduced capacityRefrigerant and exchangers temperature not affected by one train trip enabling quick restart
top related