21732 gms map productoverzicht - shipserv · to provide over pressure protection. the pc6-is is the...
Post on 03-Jun-2020
4 Views
Preview:
TRANSCRIPT
Co
nte
nt
Content Page
Calibration equipment 2
Diagnostic equipment 6
Engine Monitoring 14
Instrument valves 17
Gasdetection 19
Flow & level 21
Pressure 22
Temperature 25
Various 33
Filters 37
1
Cal
ibra
tio
neq
uip
men
t
Low cost version.
Wide temperature range
(-30°C up to +850°C).
Adapter sleeves up to 15 mm
(option 25 mm).
Temperature calibrator Standard series TP 18 000
Low cost version.
Wide temperature range
(-30°C up to +850°C).
Adapter sleeves up to 15 mm
(option 25 mm)
Temperature calibrator Standard series TP 18 000
Wide temperature range
(-30°C up to +850°C).
High-performance
software package.
Switchable tempera-
ture sensor input.
Temperature calibrator Precision Series TP 28000
Laboratory accuracy.
Stabilize the heating block
temperature to +/- 0, 03 K.
Display range -30°C to
+450°C in 1 /100 resolution.
High precision temperature Calibrator series TP 28 000S
No more burnt fingers!
1300 °C portable.
High-temperature from
200 °C -1300 °C.
High-temperature Calibrator series TP281300
Flow ranges 1 to 40 l/min.
Nominal bore DN 15.
Accuracy ± 1% of indicated value
Flow Calibrator Series VP 18000
Offers features as Laboratory
class equipment. In temperature
mode the tinydevice can
measure with a resolution of
0,01 °C and an accuracy of
± 0,03 °C. In standard signal
mode pressure (shown in bar,
mbar o psi), humidity
(shown in % RH)
and current
(shown in mA)
can all be measured.
Microtemp TT 7200 General purpose sensor
2
Fast response sensor
Surface sensor
Spike sensor
Gas temperature sensor
Cal
ibra
tio
neq
uip
men
t
3
Low pressure Test pump LTP1
Pressure calibrator PC6
Output Pressure: 0 to 2000 mbar,
30 psi. Output Vacuum:
0 to -850 mbar, 0 to -25 in Hg.
Materials: Bright nickel plated
brass, clear anodised aluminium.
Adjustment: Fine volumetric
pressure/vacuum adjuster with 0.1mbar,
better than 0.00145 psi sensitivity.
Pressure measurement range -1
to 1000 bar + psi • Voltage and
current measurement • Simul-
taneous display of pressure
and selected function • Timed/
Event data storage • RS232 data
communication link Pressure
switch test Leak rate measure-
ment 1 second to 999 days
Pressure test system TP1 -1 to 40 bar, -14.5 to 580 psi
Pressure calibrator PC6-IS INTRINSICALLY SAFE
EEx ia IIC T4
Used for calibration checks on
pressure transmitters, pressure
switches, indicators, recorders and
controllers. Adjustable stroke
to provide over pressure protection.
The PC6-IS is the Intrinsically
Safe version of our popular PC6
Pressure Calibrator specifically
designed for use in Hazardous
Environments such as those
found in the offshore and petro-
chemical industries.
HTP1 pressure test system 1000 bar, 15 000 psi Hydraulic Pressure (oil or water)
Digital pressure gaugeLEO 2 highly accurate
Lightweight, hand held and easy
to use. Quick priming and pressure
generation using scissor action
pump. High pressure/priming
selector. Fine adjustment control.
Pressure release valve.
Accuracy • 0,1 % FS typ. 0,2 %
FS max. Compensated
Temperature. Range 0…50 °C
Supply 3 V battery. Battery
Life 1’000 hours continuous
operation. Pressure
Connection adapter G 1/4”
Protection, CEI 529 IP 65
Diameter x Height x Depth
59 x 95 x 32 mm.
Marine calibration kit MCK 40/200
Marine pressure calibrator from -1 till
40 bar. Analog test gauge for pressure
switch test. Digital test gauge
for testing pressure instruments,
(0,1% accuracy). Marine temperature
calibrator till 200 °Celsius.
Optional:
range up 1000 bar and 600°C
order sample MCK40/600
Advanced marine calibration kitAMCK 40/200
Marine pressure calibrator from -1
till 40 bar. Digital calibrator for
testing and calibrating pressure
gauges, transmitters, switches
Temperature calibrator till 200°C.
Multi function Calibrator for
reading and sourcing of Pt100,
thermocouples, mA and Volt.
Optional:
range up Tto 1000 bar and 600°C order sample AMCK 700/600
Cal
ibra
tio
neq
uip
men
t
Portable multifunction calibrator TRX II Series
Deadweight testers 2000 Series
4
Pressure calibratorFluke 717
Temperature calibrator Fluke 724
Pressure calibratorFluke 718
Thermocouple calibrator Fluke 714
Calibrator Fluke 712 RTD
Multifunction process calibrator Fluke 725
Take along the new Fluke 725.
Multifunction Process Calibrator,
and you’re equipped to test
and calibrate almost any process
parameter. Measure and source
mA, volts, temperature (RTDs
and thermocouples), frequency,
ohms, and pressure, using optional
pressure modules.
is a hydraulic hand operated
unit that provides a quick
and cost effective means of
comparing readings between,
for example, a test gauge
and a standard pressure gauge,
pressure switch, etc.
Specification:
Range: 0-700bar/10,000psi Case: Cast aluminium Priming: Direct
via ram screw. Weight: 5 kg. Dimensions: 340 x 380 x 150mm.
Consists of 3 precision pressure
gauges (class 0.6) a hydraulic
handpump fitted with hose, valve
and couplings, all delivered in
a handy plastic box. The testset
fulfils the requirements of most
classifications societies. Range
pump Maximum working pressure 350 bar. Pressure gauges
160 mm. Ø. ranges 0-6, 0-16 and 0-40 bar. Accuracy Class 0.6
Optional Pressure gauges with other ranges.
Pressure calibrator PCS Comparison test pump
The TRX II portable documenting calibrator for combined
field work with the Druck and Unomat series of
calibrators. Typical accuracies: 0.01% reading ±0.01% FS for
mA measurement. 0.05% FS for pressure
measurement. Measure:
mA, mV, volts, T/C’s,
RTD’s, pressure, ohms,
frequency and switch
state. Source: mA, mV,
volts, T/ C’s, RTD’s, ohms
and frequency.
Range: 1 to 700 bar,
15 to 10 000 psi or
(kg/cm2 also available)
Standard accuracy:
0.025% of reading.
0.015%, 0.1% options.
Deadweight testers 6000 Series
Range: -1 bar to 40 bar,
-15 to 600 psi (kg/cm2
also available). Higher
accuracy: 0.01% of
reading. Standard accu-
racy: 0.025% of reading.
Deadweight testers 9000 Series
Range: 1-5000 bar,
15-75 000 psi (kg/cm2
also available) Higher
accuracy: 0.015% of
reading. Standard accu-
racy: 0.025% of reading.
Cal
ibra
tio
neq
uip
men
t
5
Digital multimetersFluke 73/77
Digital multimeters 80 Series III
High contrast digital display with large
digits, 0.3% basic accuracy Analog
bargraph/segments Auto and Manual
ranging Automatic Touch Hold® Audible
continuity/diode test Ergonomic case
with integrated holster “Classic” design
with removable holster Sleep Mode
preserves battery life
AC True RMS measurements
(Fluke 85 III, Fluke 87 III) Digital display
with bargraph and backlight Min/max/
average recording Resistance, conduc-
tance, continuity and diode measure-
ments Easy battery access without
breaking the calibration seal Input alert
warns when the leads are in the
wrong inputs “Classic” design with
removable holster Lifetime warranty.
Digital multimeters Fluke 170 series
Digital multimeters Fluke 187/189
The three models of the new 170 Series are
the new benchmarks for general purpose
multimeters. Combination of precision,
features, ease-of-use, and reliability.
True RMS voltage and current measure-
ments. 6000 count resolution Manual
and automatic ranging Frequency and
capacitance measurements Resistance,
continuity and diode measurements
Temperature measurements (179).
Extremely fast readings True RMS AC +
DC measurements 100 kHz AC bandwidth
for voltage and current Frequency,
capacitance, duty cycle & pulse width
measurements Resistance, conductance,
continuity and diode measurements
Temperature and dBV/dBm with
selectable reference Readings memory
for up to 100 readings
Graphical multimeter Fluke 867B
ProcessMeter™ Fluke 787
The Fluke 867B GMM Gives You the
Big Picture Six test tools in one.
Display Sample Measurements
Waveform Display to 1 MHz Safety-
rated to 1000V Digital Display/Counts
Selectable True-rms or Average
Sensing Continuity/Conductance/
Capacitance Min/Max/Average with
Time Stamp Relative Mode.
Precision 1000V, 440 mA digital multi-
meter Measure ac and dc volts, ac and
dc current, resistance, continuity, and
frequency 0.1% dc voltage accuracy
0.05% dc current accuracy, 1 ‘A resolution
to 30 mA Simultaneous mA and %
of scale readout. True rms ac voltage
measurement to 1 kHz DC current
source/loop calibrator·20 mA current
source/simulator. Simultaneous mA
and % of scale readout.
Industrial scopemeter Fluke 123
ScopeMeter 123 meets today’s need
of simultaneously measuring and
checking waveforms.
ScopeMeter 190 Series
high-performance oscilloscopes offer
specifications found on top-end bench
instruments. With up to 200 MHz band-
width, 2.5 GS/s real-time sampling and
a deep memory of 27,500 point per input.
Meters 321 and 322 Fluke Clamp
Measure the presence of load
current, AC voltage and continuity
of circuits, switches, fuses and
contacts Measures AC current to
400 A Measures AC volts to 600 V.
Fluke 330 SeriesA choice of five models gives
you the right functions for your
measurements.
Dia
gn
ost
iceq
uip
men
t
LEMAG PREMET XL with TDC Sensor
The PREMET XL with TDC Sensor
6
Peak pressure indicator LEMAG
DELTA - PREMET LEMAG
Designed to measure cylinder
pressure drop to highlight wrong
valves and piston rings at a very
early stage. This is achieved by
measuring the individual pressure
drop of each cylinder. It is a simple,
convenient check and can prevent
major damage to the engine.
With high gauging accuracy
to measuring the firing pressure
of internal-combustion engines,
specially of medium and
high speed diesel engines.
Type LS140, 180, 220 or 250 bar.
Records cylinder peak pressure.
The accurate peak pressure gives
valuable information on engine
condition and is indispensable
in optimising engine output,
and in balancing cylinders.
Records cylinder pressure against
time. The accurate pressure
curve gives valuable information
on engine condition and is
indispensable in optimising engine
output, and in balancing cylinders.
The PREMET LS allows also for
easy verification of the injection/
combustion process in each cylinder.
Electronic diesel engine indicator PREMET LS
Electronic peak pressure indicator PREMET L
Mobile and compact electronic
diesel engine indicators. It records
cylinder pressure in relation to the
crankshaft angle. The accurate
pressure curve gives valuable infor-
mation on engine condition and is
indispensable in optimising engine
output, and in balancing cylinders....
.....additionally features of perfor-
mances the calculation of the indi-
cated values and correspondence
between crank angle and pressure.
Ideally the system is used in
regular intervals, after major engine
repairs and after bunkering.....
Pressure tester-type CB 250LEMAG
Portable measuring device for
check the accuracy of our indicators
and many other applications.
No problem any longer
to connect and test your
indicators. Operation
of the LEMAG Pressure.
Tester Type CB 250
can be done either
with liquids or gas.
PREMET XL LEMAG with TDC Sensor
........... samples
Dia
gn
ost
iceq
uip
men
t
7
indicatorsLEMAG type 30
indicators type 50-M3 LEMAG
For the drawing of indicator
diagrams on medium and fast
speed diesel engines.
At a speed range of up
to 400 rpm it has the highest
resolution. more
Redsign of the well known
M2 series. They are for use to
draw diagrams on slow speed.
Diesel engines (<= 250 rpm).
The LEMAG type 50-M3
is available for pressure ranges
up to 300 Bar. The pressure
ranges are acc. to newest engine
developments.
High speed indicator LEMAG type 25-M
LEMAG
Can be operated in cases
where for indicators the rpm
or the pressure-change rates
are too high for indicators
type 30-M or type 50-M.
By it’s special construction
it has become possible
to receive faultless diagrams
of motors, which have more
than 1.000 rpm.
Fiberoptic inspection tool
Fiberoptic inspection tool
Allows you to see into inaccessible places.
ProVision offers the same high-performance
and results as tools costing 10 times
as much. The high resolution lens provides
a clear image of objects as close as 3/4 inch
and over one foot away while providing
a wide 40 degree field of view. A powerful
lamp illuminates dark crevices
Allows you to see into
inaccessible places.
Diameter of 8mm at tip of
insertion end, and 10mm
with side view adapter
attached allow you to get
into tight locations.
Microscoop probe tube
Magnifier with small light
probe on battery,
for internal inspection,
complete with mirror.
Inspection flashlight
Inspection mirror with a small battery
operated lamp for use in narrow interiors
and places that are not exposed to light,
complete in case with fixed and flexible
extensions and mirrors.
ISSA 652707 - 482
Option.
Solid wooden box.
Dia
gn
ost
iceq
uip
men
t
Thermo-hygrometer Waterproof mV/pH/C meter PH meter kit
8
HERMetic UTI
Portable restricted electronic gauge
Ullage temperature Oil-water-interface level
Portable electronic gauging tapes MCC
The Portable Closed Flexi-Dip measuring
tape is a battery-operated electronic unit
that is totally gas-tight.
The tape is marked in metric or english units
and is antistatic coated (as is the sensor).
The model
DC-3A is designed in accordance
with the provisions of relevant
regulations of the International
Convention for the Preventing
of Pollution from Ships, 1973 and
the Protocol of 1978.
The waterproof Hanna pHep 3 provides
complete protection against accidental
immersion as well as allowing its use in
rough environments.
Range: -2.0 to 16.0
Resolution: 0.1 pH
Accuracy: +/- 0.1 pH
Calibration: Auto 2-point
PH meter pHep 3 Oil water interface detector model DC-3A
HI 8564 thermo-hygrometer provides
readings with 95% precision in
a very short time both for R.H. and
for temperature.
Range: 10.0 to 95% RH and
0.0 to 60.0 °C and Fahrenheit.
Resolution: 0.1% R.H. and 0.1°C.
Accuracy: 2% R.H. (10-95%) and 0.4 °C.
HI-9025C Microprocessor controlled
and fully waterproof.
Range: 0.00 to 14.00 pH
+/-399.9 ISE +/-1999
ORP 0.0 to 100 C.
Resolution: 0.01 pH 0.1
ISE 1 ORP 0.1 C.
Accuracy: +/-0.01pH +/-0.2
ISE +/-1 ORP +/-0.5C.
Loupe
Loupe glass
90 mm dial
ISSA 371027- 460
Hand anemometer
Handhold anemometer to measure
windspeed in four scales,
Beaufort, knots, m/s and km/h.
With provision to freeze the latest
measured indication in order
to easily read wind strength.
Range:
0-12 Beaufort, 0-120 km/h,
0-35 m/s 0-70 knots.
Dia
gn
ost
iceq
uip
men
t
9
Hand-tachometer Type Deumo
Digital tachometer Rotara
Measuring irrespective of direction
of rotating.
Range: 16-20.000 rpm s
Range optional: 50-50.000 rpm
subdivided into 3 individual ranges
490 DEUMO 20000 RPM
ISSA 651304 491
DEUMO 50000 RPM
ISSA 651305
Photo and Contact tachometer Uusing
adaptors or merely apply a reflective mar-
ker Each reading taken is automatically
held for 30 seconds. Carrying case and
reflective tape.
Ranges: Rotation 1-99.999 rpm. photo
Rotation 1-19.999 rpm. contact
485 Handtachometer
SIROX A32099
ISSA 651310
Coating thickness gauge Elcometer 345
Hexagonal wet film comb
1% Accuracy (1-3% over full range,
1% when calibrated close to reading
to be measured) 2 point calibration
gives increased precision.
Range: A range of probes allow
the 345 to have a range
of 0 - 13mm (0 - 500 mils).
Precision formed
in stainless steel
to be long-lasting
and reusable. Separate
metric and imperial
versions available.
Range of thicknesses
(30 teeth) on one
gauge of either 25
to 2000 microns.
Salinometer SL3005
Salinometer SL6000
SL3005 Salinometer for
continuous check on
the water passing from
condenser to freshwater
tank. Audio and visible alarm
when the salinity surpasses
a given value. Automatic
warning in case of internal
or external failure.
4-20 mA output as option.
SL6000 is the latest
salinometer for measuring
and supervising the salinity
of fresh water produced
by distillation of seawater.
Audio and visible alarm
when the salinity surpasses
a given value.
Automatic warning in case
of internal or external failure.
Vibration meter Model EMT220
Measurement scale:
Displacement:
0.001 - 1.999 mm
Velocity:
0.01 - 19.99 cm/s
Acceleration:
0.1 - 199.9 m/s2
Vibration acceleration:
< 199.9 m/s2
Ultrasonic Thickness Gauge Model: SA40
Measuring range:
0.8 to 225.0mm
Resolution:
0.01mm @ 0.8-99.99mm
0.1mm @ 100.0-225.0mm
Velocity range:
500-9999m/sec.
Dia
gn
ost
iceq
uip
men
t
10
Multiple echo ultrasonic QuaNix ®
The Only Fully Automatic Coating Thickness
Gauge With Radio Control Probe.
KEYLESS – No buttons – No Cables
– No Connectors
Miniaturized mobile probe for measuring
over all metals. Automatic Zeroing
Automatic probe recharge in the basic
gauge. No Calibration.
Digital Thickness Gauge
with Liquid. Crystal Backlit
Display. Measure metal
thickness to determine
wastage or corrosion –
accurately, Quickly and
without removing
surface coatings. next
For accurate temperature readings
with hot or cold solutions
directly from the scale. For all
ethylene glycol/antifreeze
agents. Suspended scale made
of plastic with automatic tempe-
rature adjustment.
The charged condition of the battery can
be tested using the battery acid tester.
Battery hydrometer complete with suction
hose and rubber handpump.
ISSA 792662 - 355
Battery acid tester Battery hydrometer
Anti-freeze tester Glycol tester
This paste is designed for use in fuel systems
415 ISSA 650890
Universal Indicator paper for
testing PH values by comparing
colours from the sample
scale and the results of the test.
Supplied in dispenser.
pH ranges: 1 – 11 and 1 – 14
Lion Alcolmeter S-D2
Accurate and reliable, enabling a complete breath test procedure
to be carried out on board. The Lion S-D2 uses an electro-
chemical fuel cell. Nobody beats the Lion.
Detector: Electrochemical fuel cell
Power supply: 9V battery with
sufficient power for at least 500 tests.
Features: Leather protective case
with 5 mouthpieces.
Option: Set of 250 mouthpieces
ISSA code 331221 ordering code 80100
Electronicleak detector The LS790a Leak-Seeker
Variable Sensitivity: The only portable
refrigerant leak detector with 10 different
sensitivity ranges for all refrigerants,
At the lowest sensitivity setting, the LS790a
can detect an HFC134a leak as small as 1/2oz.
(15grams) per year. At the highest sensitivity
setting, the unit can detect an HFC-134a
leak as small as 1/4oz. (10 grams) per year.
Modified water paste Kolor Kut
The Paste will successfully gauge for gasoline, crude oils,
kerosene, Jet Fuels, Naptha and
various other gas
oils and chemicals.
Gasoline finding pasteKolor Kut
PH test paper
Dia
gn
ost
iceq
uip
men
t
11
Oil mist monitor QMI
Avoid this
Use light scatter as the sensing method works from
a true zero and requires no calibration. A 500-m/sec.
response times simultaneously on all channels.
Variable settings
in mg/l to suit
all types of
engines and
locations. A self-
diagnostic fault
finding system.
Crankcase explosion resulted
from the self ignition of an oil
vapour from a hotspot, the
vapour itself being caused by
the progressive and excessive
increase in temperature of
an internal surface due to high
friction loads, due to incipient
seizure between surfaces.
12 points Multiplex Detector head
Checks up to 12
detection points
simultaneously
and continuously
Allows monitoring
at source.
The system works
from a true zero
and requires no
calibration.
Raising the alarm
within half a second!
These are mounted at each crank compartment,
gear or chain-case housing and thrust bearing,
housing if this has its own space.
The detector incorporates
LED optos and a PCB.
A microprocessor,
that is built into the unit,
sends five sets of infor-
mation to the monitor
each 0.5 seconds
via a cable connection.
1 point Uniplex monitor Atmospheric detector heads
The QMI Uniplex oil mist monitoring instrument meets
the needs of small engines and confined atmospheric
spaces with all the
benefits of having
the monitor located
in the control room.
Have all the salient
features of
the Multiplex unit.
include their own fan, this ensures correct airflow
and tamper-proof operation avoiding the need
to use pressure or air flow regulators. Concentrations
of oil mist may be
localised, but normally
it diffuses into the
surrounding area.
If thisconcentration of
mist spreads throughout
the machine room
space, a flash fire can
occur over a large area.
2 point Duoplex monitor
The Duoplex oil mist
monitoring instrument have
all the salient features
of the Multiplex unit.
The Duoplex has two
detectors opposed to
Uniplex that uses one.
Have all the salient
features of
the Multiplex unit.
Dia
gn
ost
iceq
uip
men
t
Fuel & lube check Portable analysis set
Insoluble check test kit
12
Viscosity check (falling ball)
Viscosity/density test
Features:
Measuring range: 10 - 4000 cSt
Measuring time: about 3 min
Accuracy: +/- 3%
Size: 50 mm by 140 mm
Weight: 210 grams
Benefits:
Read-out is viscosity in cSt. No consumable
parts. Easy to use for non trained
personnel. Handy and time proven.
Measuring range: water in oil 0-1,
2vol%H2O, alcalinity (BN) 0-60BN.
Measuring time about 15 min.
Accuracy: +/- 3%
Size: 73 mm by 113 mm
Weight: 500 grams
Electronic lube oil test devices.
Benefits:
Two identical test procedures just one
reagent for each test. No dangerous goods.
Measuring range: 0 - 0,4 or
0 - 1,2 % H2O
Measuring time: about 15 min
Accuracy: +/- 3%
Size: 75 mm by 120 mm
Weight: 550 grams
Direct read-out in vol.-% H2O
Just one reagent. Reagent is no dangerous
good. Easy to use for non trained personnel.
Bayonet catch for highest accuracy.
Applicable for all hydrocarbon fluids.
Water in oil measuring device Alcaliny twin test Electronic Water in Oil /BN test
Allows testing of major oil parameters
viscosity (incl. CCAI calculation)
density, water in oil, alcalinity
(BN), salt water contamination,
compatibility insolubles, pour
point. size: 300 x 470 x 310 mm
weight: 22 kg easy to use -
even for non trained personnel,
handy in size, for operation
and transport no dangerous
goods test desk included.
Uses the means of a vacuum filtration device
to extricate insolubles and impurities out of the oil
onto a molecular filter. With the help of a micro
magnifying lens it is
possible to determine
quantity, dimensions
and even the origin
of impurities! Abrasions
on pistons, pumps, etc.
maybe detected in time
to react results become
catastrophic.
Viscosity check (go/no go)
Viscosity of lubricating and hydraulic oils
should be checked frequently. Applicable
for all lubricating oils and viscous hydraulic
oils, no replacement
reagents, easy
to use for untrained
personnel, handy
and simple. Features
measuring range:
go/no go measuring
time: about 1 min.
Salt check (go/no go)
It is important to know the nature of water (fresh or saltwater)
found in lubricating or fuel oil - it might give some help in
identifying the source of the leakage. Easy to handle, Colour
change will provide
a definite answer
within just fife minutes.
Experiance with
this test device will also
allow you to roughly
determine the vol %
of salt contamination.
Measuring range:
Viscosity: 25 - 999 cSt at 50°C
Density: 820-1050 kg / m3
Required sample: approx 200ml
Measuring time: about 15 min
Accuracy: +/- 3%
Size: 160x260x240 mm
Weight: 15 kg
Benefits: No sample change for each
test. Same test temperature (50°C).
Re-calculating density to 15°C.
Dia
gn
ost
iceq
uip
men
t
13
Emulsion breaking bilge water cleaning systemMarinfloc EBBWCS
IMO Resolution MEPC
107 (49). Offers a process
which treats bilge water
far below the current IMO
requirements (<15ppm).
The Marinfloc EBBWCS
consistenly treats bilge
water 0 - 3 PPM of Oil in
the discharge water outlet.
Approved
Sludge dewatering unitMARINFLOC SDwU
Reduces your water in sludge
by up to 85 %. The SDwU
can either be used in fully auto-
matic or in a semiautomatic
mode. The only moving parts
in the unit are the feed pump
and dosage pump.
Neptumatic MOC MARINFLOC
The white box system
The compact,
high-capacity,
three (3)-stage
Sewage (Black)
and Waste
(Grey) water
treatment
system.
Is designed as a fail safe system for the discharge
of water overboard. Incorporating
the oily water separator’s
oil content meter and
the return of water funtions
in a locked cabinet.
This assurence the
operators thet water
whit an oil content
of >15 PPM cannot
accidentally be
pumped overboard.
PPM monitor Oil discharge monitor
Range 0 - 30 ppm, Accuracy
IMO MEPC 60 (33) (+/- 5 PPM).
Concentration Indication
2 x 7 segment LED.
Alarm Operating Points
1 - 15 ppm (adjustable).
Alarm 1 Operating Delay
0-20 sec (adjustable).
Alarm 2 Operating Delay
10-240 sec (adjustable) 15.
Ballast monitor OCD10M
Meet the strict requirements of the latest amendments to IMO
resolution A586(14) which restricts the amount of oil discharged
via the ballast system to 30 litres per nautical mile.
Only 2 bulkhead penetrations are required instead of the usual
3 enabling a cheaper
installation to be carried
out. Available options:
Up to 4 sample points,
Flowmeters, Stainless
Steel wetted parts for
Chemical tanker service.
Eng
ine
mo
nit
ori
ng
Pressure switchesDanfoss KPS series
Pressure switchesDanfoss CS
Have a three-pole switch and adjustable differential
14
Pressure switches AMOT 4140
Modular pressure sensors AMOT Model ‘A’ Series
Rugged, lightweight and compact Single
and multi-point pressure sensing Integral
isolation valve and test point (Manifold)
Pressure ranges:
0 – 70 BAR (1015 PSI) – 4-20mA
Available as Transmitter ranges:
0 – 34.5 BAR (500 PSI) – Switch
IP65 (with DIN connector)
Suitable for marine and
industrial environments.
An advanced, reliable, rugged range of
pressure switches. Single and dual
operation allowing alarm and shutdown
capabilities in one unit, or... Combined
Pressure and temperature switch
with independent fully adjustable set
points, vibration resistant up to 14G
at 100Hz. Pressure 0.28 to 40 bar
(4 to 580psi). Temperature 16°C to 250°C.
Heavy duty 15A switch contacts
Set point indicated on scale plate.
Explosion Proof BASEEFA Certified Single
or Dual Pressure, Single or Dual
Temperature, Snap Acting – Positive
Shut-off Provides snap switch action
at set points on: Engine Coolant Systems
Process Control Points Alarm Systems
Compressor Coolant Systems Lubrication
Systems Hazardous Area Applications.
Pressure ranges: -1 to 30 bar. Replaceable
contact system Also available with gold
plated contact systems, Fail-safe, Adjustable
differential, Enclosure IP66, Available
with min. and max. reset function (IP54).
Also available as differential switch.
Available with all relevant marine approvals.
Pressure switchesDanfoss RT
Consist of a variety of ordinary controls
including differential and neutral zone
Hazardadous area temperature and pressure switchesAMOT Mode 4250
Suitable for use in alarm and regulation
systems in factories, diesel plant,
compressors, powerstation and on board
ships. Pressure ranges: 0 to 60 bar.
Adjustable or fixed differential Robust
and compact construction Resistance
to shock and vibrations. Enclosure IP67.
Sturdy and sea water resistant.
Available with all relevant land and
marine approvals.
For automatic start and stop of air
compressors and water boosters
Pressure ranges: 2 to 20 bar Contact
system: 3-pole (standard) 1-pole
(accessory) Adjustable differential
Manual switch to lock the contact
system Enclosure IP43 or IP55.
Pressure switchesDanfoss KP
For regulating, monitoring and alarm systems
in industrial applications. Fitted with a single-
pole switch changeover, and can control
single-phase ac motors of up to 2 kW directly.
Pressure ranges: -0.2 to 14 bar High
contact load - Ultra short bounce-time,
Media: Gaseous media and air Enclosure
IP44 when mounted with top cover and
back plate Small dimensions - space saving
easy to install Shock and impact resistant
Pressure switches DanfossMBC
Used in marine applications where space and reliability are
important features.
Pressure ranges: -1 to 100 bar Low
differential (fixed) micro switch Resistant
to shock and vibrations Diaphragm
version for applications with pulsations/
pressure peaks, Compact design Low
installations costs Fast and easy to operate
Easy to mount on block tvailable
as differential pressure switch Available
with all relevant marine approvals.
Eng
ine
mo
nit
ori
ng
15
Metal-bellows pressure controller Trafag
Pressure switch Condor
Metal-bellows pressure controller with
fixed switching differential. Robust
aluminium housing. Repeatability ±1.0%
FS. Protection IP 65. Any mounting
position possible. Scale accuracy ±2% FS
Measuring range: -0.9...1.5 to 10...100bar
Repeatability: ± 1 % FS Hysteresis: < 10 %
FS Measurement unit: bar/MPa.
For automatic start and stop of air compressors.
Pressure ranges: 2 to 20 bar 3-pole Contact system
MDR2
pressure
switches MDR5 &
MDR6
pressure
MDR3 switches
pressure
switches.
Solid State pressure switch Herion Norgren Model 33D
Safety shutdown device AMOT 2800
Extremely Long Life - 100 Million
Cycle. Large 4-Digit LCD Display
with Backlight.
NO, NC or Window Mode Operation.
Single or Dual Independent Outputs
Optional 4-20 mA Analog Output
Versions with 100%
Stainless-Steel Wetted Parts
which senses oil pressure.
The device is typically connected
to a fuel pump and should
a loss or drop in oil pressure
occur below the setpoint,
the 2800 will trip immediately.
The 2800 mechanically linked
to a diesel engine fuel pump
will then activate shutdown.
Two way temperature sensing valveAMOT 2230
Two way temperature regulating valveAMOT 2470
With remote sensing to modulate or shut off flow
Typical Medium Sensed: Liquids. Adjustable
Temperature, through various ranges: Trip Level:
19°-129°C. Maximum Allowable Temperature
(Proof): 129°C (265°F). Valve Body: Brass. Valve
Well: Stainless Steel. Installation Threads: 1/2 in
NPT, BSPT. Port Threads: 1/4in NPT, BSPT,
Maximum Pressure at IN Port: 8.62 Bar. Sensor
Type: Wax. Override: None.
Housing: Cast Iron Seats and Sliding Valve:
Bronze Temperature element & extension:
Brass Adaptor Assembly: 316 Stainless Steel
Dynamic Seal: Ethylene
Propylene Rubber. Maximum
Pressure on Temperature
Element: 54 Bar Maximum
Shutoff Pressure: 8.62 Bar
(125 Psi) Maximum Pressure
on Well (if used): 340 Bar.
Three way temperature regulating valveAMOT B
Flow rate: 10 - 450 m3/Hr Aplication
Diverting or Mixing Body Materials
Aluminium, Bronze, Cast Iron, Ductile
Iron, Steel & Stainless Steel Valve
Sizes (nominal bore): 40, 50, 65, 80,
100, 125, 150 & 200mm (11/2” to 8”)
Port Connections Screwed 40 &
50mm (11/2” & 2”) BSP.PL or NPT.
Flanged 50 – 200mm (2” – 8”) to most
DIN, ANSI, JIS and other standards.
ValvesAMOT G
Flow to: 2000m3/hr Sizes: 50mm (2”) to
400mm (16”) The complete temperature
control valve system. Systems can be
configured to suit applications from pneu-
matics to PLC control with communications.
AMOT 8071
Compact rugged PID controller for use
with the Amot electrically actuated model
GE control valve.
Eng
ine
mo
nit
ori
ng
Temperature switchesDanfoss KP series
Temperature switchesDanfoss MBC 8100
16
Pressure switches AMOT 4140
Temperature switchesDanfoss RT
Consist of a variety of ordinary room
and remote sensor temperature swit-
ches including neutral zone tempera-
ture switches. Temperature ranges: -
60°C to 300°C Replaceable contact
system, Fail-safe Adjustable differen-
tial Enclosure IP66 Available with min.
and max. reset function (IP54)
Available with dead zone Available
with all relevant marine approvals.
An advanced, reliable, rugged range of
pressure switches Single and dual operation
allowing alarm and shutdown capabilities
in one unit, or ... Combined Pressure and
temperature switch with independent
fully adjustable set points, vibration resistant
up to 14G at 100Hz Pressure 0.28 to 40 bar
Temperature 16°C to 250°C Heavy duty
15A switch contacts Set point indicated on
scale plate.
A robust, compact construction
and resistance to shock and vibra-
tion. Temperature ranges: -20° C to
200°C Gold plated contact
systems. Adjustable or fixed diffe-
rential. Robust and compact con-
struction Resistance to shock and
Temperature ranges: -20° C to
200°C through various ranges:
–10- 30°C
20- 60°C
50-100°C
70-120°C
60-150°C
100-200°C
Temperature switchesDanfoss KPS
Temperature switchesDanfoss KPS
Fitted with a single-pole switch
(SPDT), and can control single-phase
ac motors of up to 2 kW directly.
Temperature ranges: 0° C to 150° C
High contact load - Ultra short bounce-
time Enclosure IP44 when mounted
with top cover and back plate Small
dimensions - space saving - easy
to install Shock and impact resistant.
Used in marine applications. MBCs are compact, have high
vibration resistance and feature all commonly marine
approvals. The fixed, but low
differential guarantees accurate
monitoring of critical tempe-
ratures. Block design.
Fully electromechanical
-10 to +200 °C tempe-
rature range. Available with
all relevant marine approvals
Designed to meet the strict
demands in the marine equipment.
Thermostat 471/472 Navistat Trafag for marine applications
Compact design. Rugged housing.
High repeatability Protection IP65.
Any mounting position.
Range:
+20 ... 110 [°C]
+20 ... 150 [°C]
+40 ... 300 [°C]
Thermostat 471/472 Navistat Trafag for marine applications
Compact design. Rugged housing.
High repeatability Protection IP65.
Any mounting position.
Range:
+20 ... 110 [°C]
+20 ... 150 [°C]
+40 ... 300 [°C]
Protection tube:
65 [mm]
90 [mm]
110 [mm]
150 [mm]
KPS with remote
sensor and armoured
capillary tube
KPS with fixed sensor
and pocket
Capillair
lengte:
L=1000
L=2000
L=3000
Inst
rum
entv
alve
s
17
Pressure gauge cocks Pressure gauge cocks
Pressure gauge cocks are
intended to isolate the pressure
gauge from the pressure medium
in order to enable inspection
or replacement of the gauge
and also to extend the service live
of the pressure gauge where the
pressure is continually pulsating.
Available in brass, steel
and stainless steel
Pressure gauge valves Pressure gauge valves
To isolate the pressure
gauge from the pressure-
mediumor to throttle and
to damp pressurepulses.
Valves with test connection
enable simultaneous
connection of a test gauge
to check the pressure
in the pipe.
Adaptor with test connection Surface mounting bracket Are intended to provide a means of
surface mounting where the
thermometer or the pressure gauge
Pressure gauge snubber
To suppress the effect of pressure
pulses and pressure peaks.
Overpressure Protectors, adjustable.
Pressure Gauge Syphons
To protect the pressure
gauge from the effect of hot
pressure media such as steam
and also to reduce the effect
of rapid pressure surges.
Manifolds Combinations
To enable simultaneous
connection of a test gauge
or test equipment to test
performance of the pressure
gauge in service.
Consists of a steel
valve with test
connector and fastener.
Available in
brass, steel and
stainless steel
Inst
rum
entv
alve
s
3/4WW special ISSA 7526 B&W M/E - 50209
Angle Valves
18
Spring loaded indicator valve Connection types
Engine side:
3/4” Withworth
1/2” BSP
Metric M20x1, M20x1.5, M20x2, M20x2.5
1/2 NPT
3/4” BSP male, turnable.
Valves with special connections at engine side or
indicator side on request.
Indicator side:
W 27 x 1/10” female cone or
1-3/16” - 1/10 male cone
45° angle
extended spindle
Straight3/4WWdop
For turbocharger cleaning equipment.
Used to clean the turbine blades of
turbo-chargers.
Extentionpiece Cock kit
A service set to reconditioning
and repair of worn indicator
valves, including:
- Cone milling cutter
- Stop valve
- Valve cone nut
- Screw nut W27*1/10”.
Spindle cone privents
any unwanted
opening of
the valve, even
by unfavorable
vibrations frequencies.
Therfore a counter
nut on the spindle
is not necessary.
ISSA 7526
B&W A/E - 50205
ISSA 7526
URAGA - 50405 Straight type
90° angle type
Special 90° angle
B&W type
45° angle type
90° (angle)
extention piece
straight
extention piece
Gas
det
ecti
on
19
Multigas monitor Tetra
Multigas detector SOLARIS FIRE
For the detection of flammable
gases, oxygen and toxic gases.
Robustness and real value for money.
Intrinsically safe, with embedded
software Up to four gases measured
Loud 90dBA audible alarm, visual
alarm and vibrating alarm as
standard Rugged and robust, IP65
ingress protection Simultaneous 4
gas display with automatic backlight.
Portable instrument for detecting of O2, H2S, CO and combustible
gas. dimensions of 41/2”H x 21/2”W x 11/4”D.
Features:
- Rugged construction
- Ultimate flexibility
- World-class alarm system
- Versatile display
- Simple calibration
- Long-life battery
- TIM® System compatibility
Personal monitors Gasman II
The Gas-tester II H
Versions availableFor oxygen, toxic
and flammable gasOne year dry
cell life for toxic and oxygen models.
Highly visible and audible alarms
Confidence ‘blip’ Rugged casing
Water and dust resistant to IP66 stan-
dard. Optional rubber boot available
for particularly harsh environments.
Comprehensive PC interface.
With incorporated stroke counter
- is a manually and intermittently -
operated detector tube pump
which together with detector tubes
is used to monitor the ambient
air or the air in confined spaces for
hazardous gases.
Fixed gas detectors Calibration check gas
Flammable, toxic gas and oxygen detectors offer:
Fixed Gas Detector product range consists of:
Flamgard: Flammable Gas Detectors
Cirrus: Infrared Flammable Gas and
CO2 Detectors
TXgard: Toxic Gas & Oxygen
Detectors
TCgard: Thermal Conductivity
Gas Detector
Nimbus: Infared Flammable
Gas Detector
Flamsafe: Safe Area Flam.
Used with the appropriate calibration
check gas, offers a quick, convenient
and economical method of checking
the response of gas detection
instruments. Regulating valve, controls
the flow and includes a gauge
to measure pressure of the calibration
gas cylinder.
Optional:
Aerosol-type Calibration Check Kit.
Oxygen analyser Xendos 1800 Marine
Inert gas monitoring solutions for tankers
- Stand-alone unit complete with wet gas sampling system
- Designed for safe area oxygen analysis
- Low maintenance and re-calibration requirements
- Range of alarm outputs
to aid integration with
other systems
- Easy to set up and
to operate
- Fast response
- Weatherproof enclosure
Sevomex portable oxygen analyser Model 262A
The Servomex 262A is an reliable and accurate
portable oxygen analyser which is suitable for use
primarily in the marine industry.
Its intrinsically safe design.
The intrinsically safe Servomex
262 portable oxygen
analyser utilises Servomex’s
renowned paramagnetic
cell, which unlike some
other measuring.
- Optional
sampling
pump
- Outstanding
2-year
warranty
Gas
det
ecti
on
Gas Detector Model GP-204
Oxygen analyserModel OX-62B
20
Multigas detector Orion™
Singlegas detector Titan
Single gas combustible instrument for detection
of flammable gases or vapors. The two very
bright alarm LEDs are visible from all sides.
The intuitive one button operation allows
no false operation.
- Easy to use
- Big display with big characters
- Small size and weight
- Exchangeable battery packs in hazardous
areas (alkaline and NiMH)
- NiMH optional with vibration alarm available
Combustible Sensor % LEL
Oxygen Sensor Oxygen (0–25%)
Carbon Monoxide (0–999 ppm)
Hydrogen Sulfide (0–200 ppm)
Battery Pack Replaceable alkaline option
rechargeable NiMH battery with Vehicular
charger. Sampling Methods Integral,
Pulsecheck pump Manual aspirator modu-
le. Sampling Lines 3-foot coiled 5-foot coi-
led 10-foot 15-foot 25-foot available.
For detecting low levels of oxygen
in confined spaces or in any location
suspected of oxygen deficiency
or enrichment, the units are
for immediate assessment.
The MiniOX® Responder Alarm
has an intenal sensor; the MiniOX
Remote esponder Alarm has
an external sensor attached to a 10-foot
cable. The range is 0-100% O2.
Application:
Personal protection
Feature:
Simultaneous detection of 4 gases
LEL, O2, H2S & CO. Smallest 4 gas
monitor in the market. Vibration
alarm. Alarm trend data.
Rechargeable Ni-Cad battery.
Continuously operates for up to 10
hours. Intrinsically safe design
Personal multi-gas monitor GX-2001
Remote responder alarms MiniOX® and MiniOX®
Robust design Simple design
with small size & light weight.
Large size analog meter
3 kind of gas range
scale Detection principle
Catalytic combustion.
Combustible gas (LPG, Gasoline & LEL
scale) in air Methane (CH4) as option.
Remote type oxygen monitoring
Large size meter with illuminous
paint Stock-proof protective cover
at sensor part Long life sensor
applied Intrinsically safe in Japan
Detection principle:
Electrochemical cell
Measurable gas:
Oxygen in air
Measuring range:
0-25%
Multi-gas monitorsThermo GasTech Innova
Can be configured to monitor up to four gases in several
combinations, including the detection
of hydrocarbons in the % Vol, LEL
or ppm range, oxygen content,
and a choice of one or two toxics:
Sensors:
- Combustibles: Catalytic compensated
- Cl2, CO, HCN, H2S, NH3, NO,
NO2, O2, PH3, SO2: Electrochemical
- Methane
- Internal Sample-draw pump
Portable multigas monitorsImpact Flammable gas
The Impact range are able to monitor and display up to four
gases simultaneously including flammable and oxygen gases
as well as up to two further toxic gases.
Flammable gas: 0-100%LEL, Oxygen: 0-25%,
Carbon monoxide: 0-500ppm, Hydrogen
sulfide: 0-50ppm,
Sulfur dioxide: 0-20ppm,
Chlorine: 0-10ppm,Chlorine
dioxide: 0-5ppm, Nitrogen-
dioxide: 0-20ppm,Ammonia:
0-100ppm, Carbon dioxide: 0-3%.
Flo
w&
leve
l
21
Oil flow meters
Oil flow meters Tokico
Direct reading With reset counter
Accuracy 0.5%
Flow range See tabel
Max. working pressure 10 bar.
Hydraulic test
pressure 20 bar.
Max. working temp. 100 °Celsius
Material body Cast iron (FC25)
Material rotor FGB type: Resin
FRO type: Aluminium alloy
casting
Flow direction Right Left
Watermeter flow meter FuelCom system
For horizontal
mounting, available
in all sizes. Working
pressure: PN 16 bar. Max
temperature: 50° C Option:
for hot water
90° C) Moun-
ting: Horizontal
(Option: vertical mounting)
Provides accurate fuel measurement for
diesel engines. Simultaneous multi-engine
metering capabilities, Datalogging
capabilities Simple plug-and-play operation
LCD display, User programmable.
Highest accuracy Temperature compensated
to 60° F (15° C) Fail-safe (no fuel) starvation
design Easy maintenance in the field Field
proven reliability.
SIKA flow sensorsseries VR
- for pipelines
- Measuring range from 0.3 l/ min. to 1000 l/min.
- Can be used for temperatures
of up to 120 °C and
pressures of up to 100 bar
- Viscosity-stable for liquids
up to 10 cSt. Materials:
- POM (Hostaform)
- Stainless steel
Digital Flow Rate Indicator SIKA TD12500
The TD 12 500 can be used
as an extremely compact
“local flow display” in connection
with a SIKA flow sensor in the
TURBOTRON series. The electrical
connections are limited to the power supply.
Max. pressure 16 bar.
Max. temperature 130° Celsius.
Accuracy 1% over total range.
The meter can be mounted in a horizontal or a vertical pipe. If there is a possibility of foreign matter
being present in the liquid (which might affect the accuracy and life of the meter) a filter should be
incorporated on the inlet side.
FGB type flow range flow range max. bore Ø flens L size light oil heavey oil intermittent
15 95 130 10-200 5-200 20 100 170 40-1250 20-1250 25 125 200 150-3000 50-3000 FRO type 40 140 200 800-4500 10-6000 7000 50 155 250 1500-9000 250-13000 15000 80 185 300 3500-25000 600-35000 40000
type flow max flow conn. coupling Qn 1.5 m3 3m3 1/2" BSP
Qn 2.5 m3 5m3 3/4" BSP Qn 3.5 m3 7m3 1/1" BSP Qn 6 m3
10m3 1 1/4" BSP
- PVDF
- Brass
Type VZO 15 20 25 40 50
normal flow rate 400 1000 2000 6000 20000 l/h.
length without coupling (a) 165 165 190 300 350 mm.
male thread on body (c) 3/4” 1” 1 1/4” 2” 2 1/2” BSP
threads on couplings 1/2” 3/4” 1” 1 1/2” 2” BSP
Type 1 Type 2
Type 3 Type 3c
Type 4 Type 5
Type 6 Type 8
Pre
ssu
re
22
Pre
ssu
re
23
Airline filter Lubricator
711 Airline filter 1/4”BSP AF2000
ISSA 590801
741 Airline filter 3/8”BSP AF3000
ISSA 590802
742 Airline filter 1/2”BSP AF4000
ISSA 590803
773 Airline filter 3/4”BSP AF5000
ISSA 590804
731 Lubricator 1/4”BSP AL2000
ISSA 590811
761 Lubricator 3/8”BSP AL3000
ISSA 590812
762 Lubricator 1/2”BSP AL4000
ISSA 590813
793 Lubricator 3/4”BSP AL5000
ISSA 590817
Regulator Injection nozzle tester
721 Regulator 1/4”BSP AR2000
ISSA 590821
751 3/8”BSP AR3000
ISSA 590822
752 Regulator 1/2”BSP AR4000
ISSA 590823
783 Regulator 3/4”BSP AR5000
ISSA 590824
Type EFEP 60 H, 0-400 bar & psi.
Type EFEP 67 D, 0-600 bar & psi.
- Injection pump with hand lever.
- Acrylic transparent fuel container
with filter.
- Shut off valve
- Pressure gauge light and heavy Duty.
- High pressure pipes for connection
injectors.
- Accessories: High pressure pipes
Pressure test system TP1
Digital pressure gaugeLEO 2 highly accurate
Accuracy: 0,1 % FS typ. 0,2 % FS max.
Compensated. Temperature
Range 0…50 °C. Supply 3 V battery.
Battery Life 1’000 hours continuous
operation. Pressure Connection
adapter G 1/4”. Protection, CEI 529 IP 65.
Diameter x Height x Depth
59 x 95 x 32 mm.
U-tube sg. 1.0 J-tube sg. 13.6
range bar length mm. 0-0,3 297 0-0,4 375 0-0,5 4470-0,6 525 0-0,7 597 0-0,8 675 0-0,9 747 0-1,0 8250-1,1 8970-1,2 975 0-1,3 1047 0-1,4 1125 0-1,5 1197 0-1,6 1275
-1 to 40 bar,
-14.5 to 580 psi
Used for calibration checks on
pressure transmitters, pressure
switches, indicators, recorders and
controllers. Adjustable stroke to
provide over pressure protection.
range mbar scale mbar length mm. 0-10 10-0- 10 1720-15 15-0- 15 223 0-20 20-0- 20 2740-25 25-0- 25 3250-30 30-0- 30 3760-40 40-0- 40 4780-50 50-0- 50 5800-60 60-0- 60 6820-70 70-0- 70 7840-80 80-0- 80 886 0-90 90-0- 90 988
0-100 100-0-100 10900-110 110-0-110 1192
Pre
ssu
re
Model 213.53 Model 612.20 (industrial Series)
24
Model 111.10Black finish steel Case
Model 233.50 (liquid filling)
Stainless Steel Case and
Bourdon tube. All Stainless steel.
Nominal size 63,100, 160 [mm].
Accuracy class 1.0 1.6 (63 mm).
Bottom or back Connection 63 mm
G 1/4 BSP 100, 160 mm G 1/2 BSP.
Nominal size 40,50,63,80,100 [mm].
Accuracy class 1.6/2.5.
Bottom Connection only 40 mm G 1/8
BSP 50, 63 mm G 1/4 BSP 80,100,160
mm G 1/2 BSP
Model 111.12 Back
Connection
Stainless Steel Case.
Nominal size 100, 160 [mm].
Accuracy class 1.0.
Brass Bourdon tube.
Bottom or back Connection G 1/2 BSP.
Test Gauge Class 0.6 (± 0.5 %).
Stainless Steel Case.
Nominal size 160 [mm].
Accuracy class 0.6.
Brass Bourdon tube.
Bottom or back Connection G 1/2 BSP.
Model 312.20 Model 212.20
Stainless Steel Case. Liquid Filling.
Nominal size 63,80,100 [mm].
Brass Bourdon tube.
Accuracy class 1.0 1.6 (63 mm).
Bottom or back Connection.
50,63 mm G 1/4 BSP.
80, 100 mm G 1/2 BSP.
Stainless Steel Case.
Nominal size 100, 160 [mm].
Scale ranges per:
0 ... 10 to 0 ... 600 mbar (100 mm)
0 ... 6 to 0 ... 600 mbar (160 mm).
Bottom or back Connection 63 mm
G 1/4 BSP 100, 160 mm G 1/2 BSP.
Model 232.50
Stainless Steel Case and Bourdon
tube. All Stainless Steel.
Nominal size 63,100, 160 [mm].
Accuracy class 1.0 1.6 (63 mm).
Bottom or back Connection 63 mm.
G 1/4 BSP 100, 160 mm G 1/2 BSP.
Model 614.11
Square and Edgewise Panel.
Mounting Series.
Nominal size 72 X 72, 96 x 96,
144 x 144, 144 x 72 [mm].
Accuracy class 1.6 Model
614.11. Back Connection
only G 1/4 BSP, G1/2 BSP.
Tem
per
atu
re
25
SIKA type 271 Accuracy
Large sized straight model casing
200x36 mm.
Ranges:
-120+40°C
-60+40°C
-30+50°C
SIKA type 291
Medium sized straight model casing
150x36 mm.
About 1 % of maximum scale
value. The accuracy of thermometers
with an alcoholic fluid meets DIN 16
195 requirements and consequently,
corresponds with the requirements
for local reading thermometers.
SIKA type 174
Small sized straight model casing
110x30 mm.
SIKA type angular 135 degrees
Angular type with an angle of 135 degrees,
the last one of the first three numerals
changes as follows.
271... becomes 273...
291... becomes 293...
174... becomes 176...
SIKA type angular 90 degrees
Angular type with an angle of
90 degrees, the last one of the first
three numerals changes as follows.
271... becomes 272...
291... becomes 292...
174... becomes 175...
Tread connections
G 3/8"A
G 1/2” A
G 3/4"A
0+60°C
0+100°C
0+120°C
0+160°C
0+200°C
M16x1,5
M20x1,5
M27x2
Order Example
271 2 64 1 1 063 2 1 Thermometer execution type
straigth 271-291-174 angle 90° 272-292-175
angle 135° 273-293-176 Immersion tube type A = 1 (standard)
B = 2Ranges -120+40°C = 124
-60+40°C = 64 -30+50°C = 35
0+60°C = 06 0+100°C = 10 0+120°C = 12 0+160°C = 16 0+200°C = 20
Division Celsius (°C) 1Celsius + Fahrenheit (°C + °F) 2Columns (Filling) Blue is standard Fû = 1 Immersion tube lengths l1 in mm 63 = 063 (immersion tube “B” 100 = 100 incl. thread connection; 160 = 160 for type “A” measured from 250 = 250 lower edge of adapter) 400 = 400 Tread connections G 3/8”A = 1
G 1/2”A = 2 G 3/4”A = 3
M16x1,5 = 5 M20x1,5 =7
M27x2 = 9 Immersion tube materials Brass = 1
Steel = 2 Stainless Steel 1.4571 = 3
Special brass (hex.nut SoMs 59/tube SoMs 76) = 4
SIKA type 271 Large sized straight casing 200x36 mm.
SIKA type 291 Medium sized straight casing 150x36
mm.
SIKA type 174 Small sized straight casing 110x30 mm.
Glass Inserts (Capillaries) Capillary tube of solid glass, prismatic
(optic enlargement of the column), oval
opening, and white background for
blue fluid column. Calibration is deeply
burnt, in black, thus being absolutely
resistant. The main graduations, which
correspond with the printing on the
casing, are especially clearly outlined.
Tem
per
atu
re
MH 3310 General purpose sensor
Fast response sensor
Surface sensor
Spike sensor
Gas temperature sensor
26
SIKA-Microtemp TT 7100 SIKA-Microtemp TT 7110
Is a precision thermometer
using NiCr-Ni temperature
detector type K and covers,
depending on the exact type of
sensor, a temperature range
from -40
up to 1200°C
Is a precision thermometer
makes use of a Pt 100 sensor
with a three wire input.
It covers the range
from -100 °C
to 750 °C.
Is supplied with the semicon-
ductor sensor. The TT 7170 is
advantageous priced. Robust
aluminium anodised case
Temperature range -50 bis 1500C
Resolution 0,1 C Hold facility
semiconductor sensor
permanently
attached.
Offers features as Laboratory class
equipment. In temperature mode
the tinydevice can measure with
a resolution of 0,01 OC and an
accuracy of ± 0,030C. In standard
signal mode pressure (shown in
bar, mbar o psi), humidity
(shown in % RH) and
current (shown in mA)
can all be measured.
Microtemp TT 7200 Microtemp TT 7170
Air humidity: capacitive sensor. Temperature: Pt 1000 / 2 wire
MH 175 Measurement inputs: (mini-DIN socket)
1 x Pt 1000 / 2 wire
MH 1150 Measurement inputs: (mini-TC socket)
1 x Type K (NiCr-Ni)
MH 3155 Iinputs: (mini-DIN socket)
2 x exchangeable pressure sensor MSD
Contact thermometers Fluke 50 Series
Fast response and laboratory accuracy
(0.05% + 0.3°C) in a rugged, handheld
test tool. Relative time clock on MIN,
MAX, and AVG Electronic Offset function
allows compensation of thermocouple
errors to maximize overall accuracy
Measures J, K, T, and E-types of thermo-
couples Readout in ºC, ºF, or Kelvin (K)
Digital thermometer K-type
A large LCD display (18.5 mm),
reading hold function, °Celsius
or Fahrenheit display and
maximum record are some of
the features. Measurement
Range -50 ... +1300 °C and
-58 ... +1999 °F.
Tem
per
atu
re
27
Gas-in-Metal thermometer Process industry series
Sensor Element: Inert gas-in-metal expansion system non-toxic
Nominal Size: 100, 160 mm.
Design: Stem, with threaded connection
Accuracy Class (DIN 16 203): 1
Scale Ranges (DIN 16 203): from -200... +50 °C to 0... 700 °C
Case: Stainless steel
Pressure Rating on stem: max. 25 bar (static pressure)
Wetted Parts: Stainless steel
Connection: Lower or back connection G 1/2 A Design per DIN for thermowell
Order Options: Connection and thermowells to customer specifications Other connectionsLiquid
filling (case) Alarm contacts Combi-Thermometer: lower connection with Pt 100, 3- lead (DIN IEC 751).
Gas-in-Metal thermometer Distant reading process industry series, with capillary
Sensor Element: Inert gas expansion system, non-toxic Nominal Size: 100, 160 mm. Mounting Provisions: 3-hole surface mounting flange (code H), stainless steel Surface mounting bracket (code M), die cast aluminum3-hole panel mounting flange (code V), stainless steel Triangular bezel with clamp (D), stainless steel Accuracy Class (DIN 16 203): 1Scale Ranges (DIN 16 203): from -200... +50 °C to 0... 700 °C Case: Stainless steel Pressure Rating on stem: max. 25 bar (static pressure) Capillary: Stainless steel, Ø 2 mm Wetted Parts: Stainless steel Connection: Plain, with or without threads Design per DIN for thermowells per DIN Order Options: Design and thermowells to customer specifications Other connections Liquid filling (case)Alarm contacts
Gas-in-Metal thermometer Process Industry Series, with adjustable stem and dial
Sensor Element: Inert gas-in-metal expansion system, non-toxic
Nominal Size: 100, 160 mm.
Design: Case rotatable on stem 360°, stem adjustable all angle
Accuracy Class (DIN 16 203): 1
Scale Ranges (DIN 16 203): from -200... +50 °C to 0... 700 °C
Case: Stainless steel
Pressure Rating on stem: max. 25 bar (static pressure)
Wetted Parts: Stainless steel
Connection: Plain, with or without threadsDesign per DIN for thermowells per DIN
Order Options: Connection and thermowell to customer specifications Other connections,
Liquid filling (case) Alarm contacts
Ranges
Options:
Different panel mounting options. Surface-mounted contact bulb. Liquid filling (case). Alarm contacts.
Connection s and thermowell to customer specifications. With Pt 100, 3- lead (DIN IEC 751) °C & °F or °Fahrenheit Scale.
Back
Connection
Bendable stem
360° or 180°
Straight Lower
connection
Range in
°C and °F
Liquid filling
(case)
-10 ...+110 °C
-10 ...+150 °C
0 ...+25 °C
0 ...+40 °C
0 ...+60 °C
0 ...+80 °C
0 ...+100 °C
0 ...+120 °C
0 ...+160 °C
0 ...+200 °C
0 ...+250 °C
0 ...+300 °C
0 ...+400 °C
0 ...+500 °C
0 ...+600 °C
0 ...+700 °C
0 ...+800 °C
-20 ...+40 °C
-20 ...+60 °C
-20 ...+80 °C
-20 ...+100 °C
-20 ...+120 °C
-20 ...+180 °C
-15 ...+45 °C
-10 ...+15 °C
-10 ...+30 °C
-10 ...+50 °C
-200 ...+50 °C
-120 ...+40 °C
-110 ...+50 °C
-100 ...+100 °C
-100 ...+50 °C
-80 ...+40 °C
-60 ...+40 °C
-60 ...+60 °C
-50 ...+50 °C
-40 ...+20 °C
-40 ...+40 °C
-40 ...+60 °C
-40 ...+80 °C
-40 ...+110 °C
-40 ...+120 °C
-40 ...+160 °C
-30 ...+30 °C
-30 ...+50 °C
-30 ...+70 °C
-30 ...+170 °C
Tem
per
atu
re
28
Type Bcoupling nut
Type CFixed connection
Type A04turning nipple
Straight Type TSR - Awith black painted steel case
Straight Type TXR - Astainless steel case
Angle Type TSR - Ewith black painted steel case
Type B01coupling nut
+ double nipple
Type B02with pocket
Type CS3adjustable
connection
sliding on stem
Backflange Type TXC - Bwith stainless steel case
Backflange Type TSC - Bwith black painted steel case
Type Bcoupling nut
Type A04turning nipple
Type B01coupling nut +
double nipple
Frontflange Type TXC - G, with stainless steel case
Frontflange Type TSC - G,with black painted steel case
Panel mounting narrowrim bezel with clamp
TypeTXC - H,with stainless steel case
Type TSC - Hwith black painted steel case
Type B02with pocket
Type CS2sliding on capillary
Type CS3adjustable
connection
sliding on stem
Angle Type TXR - Ewith stainless steel case
+K=180 or +K=360Bendable 360_ or 180_
Tem
per
atu
re
29
Cabin thermometer Bridge thermometer
Dail thermometer for wall
mounting, 100 mm. dial metal
case, range -10/+50° Celsius
Enamelled based thermometer
for in- or outdoor use
range -25/+50 °Celsius.
Cabin thermometer Minimum-maximum thermometer
Thermometer for wall mounting,
range -30/+50° Celsius & °Fahrenheit on
wooden, plastic or enamelled base.
ISSA 651701- 134
U-shaped thermometer,
range -30/+50° Celsius to register the
highest and lowest temperature.
ISSA 651706 - 136
Refrigerator thermometer Sauna thermohygrometer
Plastic thermometer for use in
refrigerators or freezing rooms,
range -30/+30 °Celsius.
Metal cased dial thermometer
for wall mounting and
measuring sauna temperature
and humidity, range +30/+120° C
and 0-60% relative humidity.
Sling psychrometer
Whirling psychrometer with wet and
dry bulb precision thermometers
in plastic casing for measuring air
temperature and humidity with
tabel, range -10/50° Celsius div. 0,5° C.
with side rule. (optional °Fahrenheit)
ISSA 370261 - 470
Dial thermometer - hygrometer
Hair hygrometer with
thermometer, for wall
mounting range 10-40°
Celsius and 30-100%
relative humidity. Colour:
White Diameter: 100mm
Robust case 204
ISSA 370256
Tem
per
atu
re
Thermometer Nurnberg stainless steel
Thermometer Copper cased
30
Meat roasting thermometer Pulp thermometer
Bimetal dial type meat thermometer
with spikeend stainless steel stem
120 mm or 400 mm., for the internal
temperature of (frozen) food, meat
and fish range -40°/ +40° Celsius or
0-120° Celsius, divided 1.0° Celsius.
With spike-end stainless steel
stem 120 mm., for the internal
temperature during roasting
or cooking meat, Material:
Stainless Steel The display
shows chicken, pork, lamb and
beef rare, medium and well
done. Range +60/+90° Celsius.
Material: Stainless Steel
This traditional dial thermometer
has an easily readable scale.
With integral hook and stand.
Pocket thermometer Pencil thermometer for general use,
150 mm. in nickel plated casing with
clip, ranges -30°/+50° C, 0-100° C,
-10/+20° Celsius for fruit with point
ISSA 651732 - 188
Digital pocket thermometer for general
use range -20°+150° Celsius, with hold
function. Resolution 0,1° C
Dial pocket thermometer24 mm Ø, with stainless steel
stem 80 mm., for general use.
Digital -20/150 C ISSA 651722 - 184
Dial -40/+40C ISSA 651735 - 181
Dial 0-120 C ISSA 651736 - 190
Digital and dial pocket thermometer Oven thermometer
Thermometer in stainless steel casing with
suspension ring and sampler for measuring tank,
hold and seawater temperature, range -10/+100
or -30/+50° Celsius & °Fahrenheit.
Option:
refill
Thermometer in copper case with sampler
for measuring tank, hold and seawater
temperature, range -10/+110 or -30/+50° Celsius
& °Fahrenheit. range -40/+60 C/F
ISSA 651710 - 124
Cargo-hold thermometer
Thermometer in wooden case with
rubber protection rings against shocks
and suspension ring, for measuring,
hold temperature, range -10/+100 or
-30/+50° Celsius or °Fahrenheit.
Test-pencil thermometer
Thermometer in brass case 300x12 mm. with
suspension ring, for general use, all ranges from
-50/+50° C up to 0-600° Celsius or °Fahrenheit.
range 50/+50 C: ISSA 651715 - 974
range -20/110C: ISSA 651725 - 962
range -20/110Cred: ISSA 651727 - 144
range 0-240 F: ISSA 651728 - 150
range 0-500 C: ISSA 651730 - 148
Tem
per
atu
re
31
Tank thermometer Tank thermometer
In brass case with suspension ring,
range -30/+100 or -30/+50° Celsius & °Fahrenheit.
Brass case ISSA 651742
Stainless steel casing
Options:
Test certificate.
InStainless steel case with suspension ring,
range -30/+100 or -30/+50° Celsius & °Fahrenheit.
Options:
Test ertificate.
Thermometer Bridge
Freezing room thermometer
Brass chromium plated case.
Range -30/+50 °Celsius & °Fahrenheit
length 300 mm.
Thermometer in wooden case for measuring,
refrigerator and freezing room temperature,
range -30/+50° Celsius & °Fahrenheit.
Thermometer Cargo-Hold
Thermometer Refill
Thermometer in brass case with suspension ring,
for measuring, hold and air temperature,
range -30/+100 or -30/+50° Celsius & °Fahrenheit.
Glas thermometer 270x16 mm, for tank-freezing-
cargo and bridge thermometer, ranges -30/+100
or -30/+50° Celsius & °Fahrenheit.
Thermometer Nurnberg Stainless Steel
Thermometer in stainless steel casing
with suspension ring and sampler for
measuring tank, hold and seawater tem-
perature, range -10/+100 or -30/+50°
Celsius & °Fahrenheit.
Option:
refill
Tank thermometer chain
Chain, steel
or Stainless Steel
Tem
per
atu
re
Meat roasting thermometer Pulp thermometer
32
Diesel exhaust gas thermometer RX3100 vertical stem
RX3101 horizontal stem
Diesel exhaust gas thermometer RX3080 vertical stem
RX3081 horizontal stem
Pyrometer, silicone oil filled, Ø. 100 mm.
specially adapted to measuring of diesel
engine exhaust gas temperature. Stabilized
against vibrations with silicone oil filled
case. Fully dust-proof and watertight Range.
+50/+650 °Celsius or dual scale all stem
lengths and connections available.
Pyrometer, silicone oil filled, Ø. 130 mm.
specially adapted to measuring of diesel
engine exhaust gas temperature. Stabilized
against vibrations with silicone oil filled case.
Fully dust-proof and watertight Range.
+50/+650 °Celsius or dual scale all stem
lengths and connections available
Same as RX3080 with backflange
for wall mounting
and with 3 or
5 mtr capillary tubing
stemlengt adjustable and all type
connections available.
Dial type immersion thermometers for temperature
measuring in oil, water and air systems for safe
operation and optimal efficiency.
Case: Zinc-coated metal, Nickel-coated bezel,
Immersion parts of brass.
Dial: 66 mm. and 80 mm.
Ø. Range 0-120 °Celsius.
Stem: Horizontal or vertical,
length from 40 mm.
up to 160 mm.
Connection: 1/2” BSP.
Thermometers Bimetal marine
Diesel exhaust gas thermometer RX3085
With spike-end stainless steel stem
120 mm., for the internal temperature
during roasting or cooking meat,
Material: Stainless Steel.
The display shows chicken, pork,
lamb and beef rare, medium and well
done. Range +60/+90° Celsius.
Bimetal dial type meat
thermometer with spikeend
stainless steel stem 120 mm or 400 mm.,
for the internal temperature of (frozen)
food, meat and fish range -40°/+40° Celsius
or 0-120° Celsius, divided 1.0° Celsius.
Pulp thermometer
Bimetal dial type meat thermometer
with spikeend stainless steel stem
120 mm or 400 mm., for the internal
temperature of (frozen) food, meat
and fish range -40°/+40° Celsius or
0-120° Celsius, divided 1.0° Celsius.
Oven thermometer Dial
Material: Stainless Steel.
This traditional dial thermometer
has an easily readable scale.
With integral hook and stand.
Var
iou
s
33
Deflection indicator DI-4
The ovality kit
Micro-processor controlled.
Measurement reports can be
down loaded to pc. Large
measurement distance (89 -
565mm). Invar alloy extension
bars for minimal expansion.
Measuring range from + 2,015
to - 2,015mm. Accessories
available for cylinder liner
ovality measurement.
Is an accessory to the DI-4C
Deflection Indicator and is designed
primarily to measure cylinder liner
wear and ovality, diameters 180 –
600 mm. However, the device can
be modified to take measurements
from various applications to your
own requirements.
Crankshaft gauge Dial gauge + magnetic base
Ready-to-operate engines or compres-
sors. Assembled engines or compressors,
with connecting rod in place. Assembled
engines or compressors, with connecting
rod removed. Dismantled crankshafts,
between centres. Set Range.
[distance between webs]
KP-300 60to300 mm 0.01mm
KP-500 60to500 mm 0.01 mm
Standard dial gauge 60 mm. Ø, range
0-10 mm. graduation 0.01 mm., with
adjustable indicators for settings and
zero adjustments, with magnetic
base Options: Waterproof types and
other ranges Dial Gauge 10 mm per
0.01 mm ISSA 651403 - 398 Dial
Gauge 10 mm per 0.01 mm
ISSA 651404 - 397 Magnetic Base
ISSA 651426 - 396
Inside micrometer
Available in all sizes
Injection nozzle tester Type EFEP 60 H, 0-400 bar & psi.
Type EFEP 67 D, 0-600 bar & psi.
- Injection pump with hand lever.
- Acrylic transparent fuel container
with filter.
- Shut off valve
- Pressure gauge light and heavy Duty.
- High pressure pipes for connection
injectors.
- Accessories: High pressure pipes.
Gauge pointer puller
Essential tool
to remove
pointers from
pressure
gauges and
thermometers.
Solenoid coil tester
Simple pencil type in strument
to confirm the working of
the electromagnetic field in
a solenoid coil.
Var
iou
s
Thermometer hygrometer Dial
Anti-freeze tester Glycol tester
34
Psychrometer Stevenson screen box
Wooden housing for measuring
outside temperature and
humidity without influence by
radiation and precipitation,
supplied with wet and dry bulb
precision thermometers with
tabel, range -10/50° Celsius.
(optional °Fahrenheit).
Wet and dry bulb precision thermometers
in plastic casing for measuring temperature
and humidity with tabel, range -10/50°
Celsius. (optional °Fahrenheit)
Hair hygrometer 100 mm Ø,
for wall mounting range
0-100% relative humidity.
Hair hygrometer 100 mm. with
precision thermometer, to measure
humidity, temperature, vapor
tension and dew point.
range -10/+50° Celsius and 0-100%
relative humidity, for wall mounting.
206 ISSA 370266.
Polymeter Hygrometer
Hair hygrometer with
thermometer, for wall
mounting range 10-40°
Celsius and 30-100%
relative humidity.
Colour: White Diameter:
100mm Robust case
204 ISSA 370256
For accurate temperature readings
with hot or cold solutions directly
from the scale For all ethylene
glycol/antifreeze agents. Suspended
scale made of plastic with automatic
temperature adjustment
Battery Acid Tester Battery Hydrometer
The charged condition of the battery can
be tested using the battery acid tester.
Battery hydrometer complete with suction
hose and rubber handpump.
ISSA 792662 - 355
Kolor Kut Gasoline Finding Paste
The Paste will successfully
gauge for gasoline, crude oils,
kerosene, Jet Fuels, Naptha and
various other gas oils
and chemicals.
Var
iou
s
35
Measuring glass Sampling bottle
volumes from 10 up
to 1000 ml
Designed for sampling
products in tanks. Heavy
weight added for sampling
at any level as well from
the bottom of the tank.
Made from brass Brass ISSA
651371 - 446 Made from
stainless steel. Stainless Steel
ISSA 651373 - 447
Metal load line hydrometer Metal salinometer
Specific gravity hydrometers to determine
the density of sea/fresh water with tabel
and instructions. Range 0.995-1.040 kg/l.
scale apparent density Kg/l. in air tempe-
rature of standardization 15° Celsius.
ISSA 651384 - 451
Salinometer for boilerwater
Range 0 - 4/32 Salinometer, metal 0-4/32
ISSA 651382 - 452
Glass hydrometer
Specific gravity hydrometers for determination the
density of liquid.
Available ranges:
from 0-25 °Beaume and 0-50 °
Beaume from 0.600-0.700g/cm3, 0.700-0.800g/cm3,
0.800- ....., ....,..., 1.900-2.000g/cm3
from 0.600-0.650g/cm3, 0.650-0.700g/ cm3,
0.700- ....., ....,..., 0.950-1.000g/cm3
Including thermometer
from 0.600-0.700g/cm3, 0.700-0.800g/cm3,
0.800- ....., ....,..., 1.500-1.600g/cm3
from 0.600-0.650g/cm3, 0.650-0.700g/cm3,
0.700- ....., ....,..., 1.050-1.100g/cm3
from 1 - 11 API, 9-21 API, 19- ..., ....., ..., 79-91 API
Draft survey glass hydrometer
Specific gravity hydrometers to determine the den-
sity of sea/fresh water with conformity certificate
and instrution leaflet.
Range: 0.990 1.040 kg/l
Scale: apparent density Kg/l in air
Temperature of standarization: 15° Celsius.
Hydrometer, glass, incl. cert.
ISSA 651344 - 352
Glass hydrometer API
Specific gravity hydrometers for determination
the density of liquid.
306 API 1-11 ISSA 651351
307 API 9-21 ISSA 651352
308 API 19-31 ISSA 651353
309 API 29-41 ISSA 651354
310 API 39-51 ISSA 651355
311 API 49-61 ISSA 651356
312 API 59-71 ISSA 651357
361 API 69-81 ISSA 651358
362 API 79-91 ISSA 651359
363 API 89-101 ISSA 651360
Salinometer pot
Copper can with
wooden grip for salt-
water gravity tests
with hydrometers or
salinometers
ISSA 651386 - 445
Var
iou
s
Barometer Marine Aneroid
Marine clock Radioroom
36
Solenoid coil tester Tube clinometer
Stainless steel panel 16x5”
with single glass tube for heel
and trim angle, range 5-0-5°
sub divided 1/10°.
Simple pencil type instrument
to confirm the working of
the electro-magnetic field in
a solenoid coil.
Double glass tube for heel and trim angle on
plastic base, range 6-0-6° and 60-0-60°
Dimensions: 6”w X 3 3/4”h X 3/8”d. Degree
Range: upper ±6°, lower
±60°. Degree Markings:
upper 1°, lower 5° Case
Materials: White acrylic,
raised hot stamped
markings Tube Construc-
tion: Glass with black ball
on white background
Dial clinometer for heel and
trim angle, brass plated
130 mm. Ø dial, range 45-0-45°
with oil damping.
Dial clinometer Tube clinometer
Brass plated 130 mm.
Ø dial, with dual scale
mbar and mmHG
Brass plated 130 mm.
Ø dial, quarts battery
operated clock with
4 tree minute radio silence
periods marked on the dial.
Digital stopwatch
Stopwatch LCD display, water tight,
timing range 59 min. 59,99 sec.
with rollover and continuous timing,
High accuracy.
Analog stopwatch
Stopwatch Crown Stopper, easy to use,
start-stop-reset, metal case, reading
1/5 seconds, timing range 30 min.
Marine clock
Brass plated 130 mm.Ø dial,
quarts battery operated clock.
Mann & Hummel
Filt
ers
37
Ultra Sonic cleaning equipment
Filt
ers
HDU 27/* -T series CJC™ Filter elements
38
HDU 15/25 series HDU 27/- series
90-1500 L/h Application:
medium to large fluid systems
within land based and offshore
industries: hydraulic systems,
lubrication systems, marine
diesel engines.
Are inexpensive offline filter units
with pump capacities from 0.75 to
5 litres/ minute (0.2 to 1.3 gpm),
ideal for small hydraulic power
packs, gear boxes, tap changers
and injection moulding machines.
120 - 360 L/h
Application: marine diesel
engine lube oil filtration and
in quench oil systems.
Application: large hydraulic
systems, large industrial gears,
power turbines, control systems
and diesel engine lube oil.
HDU X*27/- Tank series 600-6000 L/h
HDU 427/- series
offline units mounted on a drain tank
base and with pump capacities from 1.5
to 50 litres/minute. Ideal for medium to
large hydraulic systems, gear boxes, diesel
engine lube oil in marine applications.
The HDU 27/* units are available in sizes
27/27, 27/54, 27/81 and 27/108, using 1,
2, 3 or 4 stacked CJC™ Filter Elements
of types A, B or BLA according to system
fluid type and volume.
Exhibit very deep oil filtration characteristics and
an extensive dirt and water absorption capacity
(up to 4 liters of dirt per element). All CJC™ Filter
Elements have an
oil filtration degree of
3 µm (micron) absolute,
i.e. 98.7% of all solid
particles > 3 µm and
approximately 50% of all
particles > 0.8 µm will
be retained in one pass.
A 15/25, A 27/27, A 38/40 and A 38/60
Application: The type A filter insert
is ideal for fine filtration of mineral
and synthetic based Engine lube
oils, Turbine lube oils, Hydraulic oils,
Gear oils, Honing oils Quenching
oils The dirt holding capacity of an
A 38/20 insert is 2.5 litres of evenly
distributed solids. The water absorp-
tion potential is up to 50% of the
total contaminant holding capacity.
B 15/25, B 27/27, BN 27/27, BM 27/27, BT 27/ 27, BG 15/25, BLA 15/25,BLA 27/27 and BLAT 27/27
Application: The B Filter Insert is especially
manufactured for CJC™ Filter Units used for filtration
of mineral oil based: Motor
Lubricating Oils, Hydraulic Oils,
Turbine Lubricating Oils, Gear Oils,
Honing Oils, Rolling Oils
*Production of the PFU-series has
been discontinued. However
the PFU applicable filter elements
are still produced
Cal
ibra
tio
neq
uip
men
t
39
Low pressure In-line filters Type L/Model GA
Low pressure In-line filters Type L/Model BGAH
High pressure filters Type H/Models 100, 200, 300
and SH100
High pressure in-line filter Type H/Model 1000
Tank mounted return line filters TypeT/Model TTF
Tank mounted return line Type T/Model BGT-S
Tank mounted return line filter Type T/Model
Tanktopper series
Medium pressure in-line filterType M/Model AGS
Medium pressure in-line filter Type M/Model MPN
Suction filterType B/Model ATZ
Medium pressure in-line filterType M/Model MGS
Low pressure In-line duplex filtersType D/Model BDK
Hydraulic filtrationreplacement elements
Insert filtersType I/Model IN-AGB
Filt
ers
Double filter Type 2.04.5
Automatic backflushing filterType 6.23/6.24
40
Basket element Filter candle insert for backflushing filters
As in the ordinary filter candle insert, several filter candles are
screwed into a single candle holder.
Filter candle insert contains several mesh candle elements of
the same size and mesh connected in parallel.
Star-pleated element has a large filter surface yet a small
diameter due to the pleating of the filter element.
Filter cartridge consists of a pleated plastic, glass fibre, non-woven
or paper element. Filter candle insert for backflushing filters.
Filter is suitable for coarse filtration or for minor contamination.
Multi-mantle elementThe mantle filter insert consists
of several cylindrical
filter mantles.
Water, oil, fuel, chemicals. Nominal width: DN 65 to DN 300.
Filter inserts: basket element, ring filter element, filter candle
insert, multi-mantle element.
Filter finenesses: 10 µm uo to >2000 µm
Flow rate: up to max. 1000 m3/h
Operating pressure: PN 10 up to PN 40
Optional equipment: -
Differential pressure indicator optical
or electric
- Internal lining
- Heating
Water, oil, fuel, chemicals, alkaline cleaning agents. Nominal
width: DN 80 to DN 150. Filter inserts: Basket element, Ring
filter element, Filter candle insert, Multi-mantle element
Filter finenesses: 10 µm up to 2000 µm.
Flow rate: up to max. 250 m3/h.
Operating pressure: PN 10 up to PN 40
Optional equipment:
- Differential pressure indicator
optical or electric
- Heating
Double filter Type 2.68.2
Single Filter Type 1.65.1/1.65.2
Water, oil, fuel
Nominal width: DN 25 to DN 80. Filter
inserts: Star-pleated element, Basket
element. FIlter finenesses: 10 µm up
to >2000 µm. Flow rate: up to
max. 70 m3/h. Operating pressure: max.
PN 24. Housing material: Grey cast iron,
Nodular cast iron. Optional equipment: -
Differential pressure indicator optical
or electric.
Fuel
Nominal width: DN 32 to DN 50. Filter inserts:
Filter discs. Filter finenesses: 34 µm abs. up
to 48 µm abs. Flow rate: up to max. 11,5 m3/h.
Operating pressure: max. PN 16. Operating
temperature: max. 150°C. Housing material:
Nodular cast iron.
Optional equipment:
- By-pass switch-over filter
- Heating
Automatic backflushing filter
Type 6.62
Fuel
Nominal width: DN 25 to DN 80. Filter
inserts: star-pleated element, Basket element.
Filter finenesses: 10 µm abs. up to
48 µm abs. Flow rate: up to max. 60 m3/h.
Operating pressure: max. PN 16.
Operating temperature: max. 150°C
Optional equipment:
- By-Pass changeover filter
Automatic backflushing filterType 6.60/6.61
Cooling lubricant, alkaline neutral cleaning
agent, fuel, lubricating oil. Technical data
fot lubricating oil. Nominal width: DN 50
to DN 350. Filter inserts: Filter candles.
Filter finenesses: 25 µm abs. up to
48 µm abs. Flow rate: up to max. 750 m3/h
Operating pressure: max. PN 10.
Operating temperature: max. 80°C
top related