2018 full dealer program catalog€¦ · • imist-ready • gen 1.3 125 gal drum with agitation...
Post on 22-Jun-2020
2 Views
Preview:
TRANSCRIPT
2018Full Dealer Program Catalog
• Gen 1.3 55 Gal Drum WITH Agitation
• #90155 (120V/60Hz)• #90850 (120V/50Hz)• #90851(240V/50Hz)
• Gen 1.3 125 Gal Drum WITH Agitation
• #90355
• Same control unit & pump as 55 Gal Gen 1.3• Larger tank to extend replenishment cycle• Includes 2nd gen remote, waterproof cover• Not iMist-ready
#90155 - $935.00#90850 - $960.00
#90851 - #1010.00
$1445.00
Drum Units
• Includes 2nd gen remote, waterproof cover• Not iMist-ready
• Gen 1.3 55 Gal Drum NO Agitation
• #90000 (120V/60Hz)
$810.00• Includes 1st gen remote, waterproof cover• Not iMist-ready
• Gen 1.3 55 Gal Drum WITH Agitation and Leak Detection
• #80100
$990.00• Includes 2nd gen remote, waterproof cover• iMist-ready
• Gen 1.3 125 Gal Drum WITH Agitation and Leak Detection
• #80300
• Same control unit & pump as 55 Gal Gen 1.3• Larger tank to extend replenishment cycle• Includes 2nd gen remote, waterproof cover• iMist-ready
$1500.00
2018 Full Dealer Program Catalog 2
• iMist2 Gateway• #15150
• Gen 1.3 Zone Kit• #20071
• Allows you to use one unit instead of two if nozzle circuit is larger than about 80 nozzles
• Enables monitoring and management over smartphone app and website
• For use only with units labelled as iMist-ready
$145.00
$160.00
Accessories for Drum Unit
• Gen 1.3 55 Gal Nozzle Circuit Filter
• #29013
• Installed on misting unit with bracket, protects nozzles from fouling
• Filter element ($3) should be changed annually
$44.00
• Gen 1.3 125 Gal Nozzle Circuit Filter
• #29125
• Installed on misting unit with bracket, protects nozzles from fouling
• Filter element ($3) should be changed annually
$44.00
2018 Full Dealer Program Catalog 3
• Gen 3 Tankless –includes agitation and leak detection
• #90500 (120V/60Hz)• #90853 (120V/50Hz)• #90854 (120V/50Hz)
#90500 - $1385.00#90853 - $1435.00#90854 - #1485.00
Tankless Unit
• Finish kit includes 2nd Gen remote, PlusCapfor tip and measure bottle, faucet adapter, 25’ of 3/8” water line, water line filter
• iMist-ready
2018 Full Dealer Program Catalog 4
• Empty Tip and Measure bottle
• #10340
• Gen 3 Zone Kit• #20073
• Hose Y for Gen 3• #10095
• You transfer concentrate into bottle• Tip and measure ports allow bottle to vent
• One port serves Gen 3, the other preserves the faucet for use of a garden hose
• Allows you to use one unit instead of two if nozzle circuit is larger than about 80 nozzles
$10.00
$16.00
$160.00
Accessories for Tankless Unit
• Gen 3 Nozzle Circuit Filter
• #29040
• Installed on misting unit with bracket, protects nozzles from fouling
• Filter element ($3) should be changed annually
$44.00
• iMist2 Gateway• #15150
• Enables monitoring and management over smartphone app and website
• For use only with units labelled as iMist-ready
$160.00
2018 Full Dealer Program Catalog 5
• Slimline Nozzle – 45 deg
• #20048
• Slimline Nozzle –straight
• #20045
• 15” Riser Assembly• #50500
• 30” Riser Assembly• #50530
• Installed every 10 ft on fence, wall or eave• Requires a ¼” union tee• Sold in bags of 10
• Include all components to assemble riser –45 deg nozzle, union coupling, 30” copper riser, union tee, stabilizer
• Sold in packs of 10
• Include all components to assemble riser –45 deg nozzle, union coupling, 30” copper riser, union tee, stabilizer
• Sold in packs of 10
$66.00
$66.00
$179.00
$163.00
Nozzles & Risers• Installed every 10 ft on fence, wall or eave• Requires a ¼” union tee• Sold in bags of 10
• Commercial Riser Assembly
• #54000
• Include all components to assemble riser –45 deg nozzle, riser union, 24” anodized aluminum riser, hardened tip, union tee, 26” black tubing
• Sold in packs of 10
$195.00
2018 Full Dealer Program Catalog 6
• Union tee ¼”• #10185
• Union elbow ¼”• #10180
• Require 1 per structure nozzle• Plan for 10 extra per installation for
internal branches• Sold in bags of 10
• Use in eaves to make 90 turns rather than kinking tubing.
• Plan 10 per standard installation• Sold in bags of 10
$26.00
$26.00
¼” Push-to-Connect Fittings
2018 Full Dealer Program Catalog 7
• ¼” Nylon Tubing• Black - # 10360• Tan - #10368• White - #10366• Gray - #10367• Cocoa - #10369• Natural - #10365
• Dynaclamp ¼”• White - #10223• Natural - #10227
• Nylon Clamp – 3/8”• Black - #10210• Natural - #10215
• Includes screw, clamps tubing to surface - 1 clamp every 2 ft
• Sold in bags of 100
• Clamps nozzle/fitting to surface – 1 clamp per structure nozzle
• Sold in bags of 100
$95.00
$8.45
$5.25
¼” Tubing & Clamps
• 10 ft per nozzle standard• Sold in 500 ft roll
2018 Full Dealer Program Catalog 8
• 3/8” Black Tubing• #10370
• Union Coupling 3/8”• #10179
• Reducer – ¼” x 3/8”• #10434
• Requires reducer to join ¼” tubing to 3/8” tubing
• Joins ¼” tubing to 3/8” union coupling or 3/8” union elbow
• Pressure boost line requires a reducer and either a 3/8” union coupling or 3/8” union elbow at each end of the boosting line
$205.00
$3.45
$3.40
3/8” Pressure Boost Components
• Used in pressure boost line or to protect ¼” line on tree nozzles
• Sold in 500 ft roll
• Union Elbow 3/8”• #15010
• Requires reducer to join ¼” tubing to 3/8” tubing
$4.25
2018 Full Dealer Program Catalog 9
• Riptide – ½ gallon standard bottle
• #10325
• Sector – ½ gallon tip and measure bottle
• #10330
• Sector – 1 gallon standard bottle
• #10430
• Ingredients – 10% synthetic permethrin, 10% PBO synergist
• Sold in cases of 4 x ½ gallon bottles• Discounts
• $20 per case for orders of 2-4 cases• $30 per case for orders of 5 or more
cases
• Ingredients – 10% synthetic permethrin, 10% PBO synergist
• Transfer to 1 gallon tip and measure bottle for use in Tankless unit
• Sold in cases of 4 x 1 gal bottles• Discounts
• $50 per case for orders of 2-4 cases• $80 per case for orders of 5 or more
cases
$426.00
$280.00
$480.00
Concentrates
• Ingredients – 5% natural pyrethrins, 25% PBO synergist
• Transfer to 1 gallon tip and measure bottle for use in Tankless unit
• Sold in cases of 4 x ½ gallon bottles• Discounts
• $20 per case for orders of 2-4 cases• $30 per case for orders of 5 or more
cases
2018 Full Dealer Program Catalog 10
• Tube Cutter• #10385
• Tube Release Tool• #10390
• Pressure Tester• #28000
• To remove tubing from fittings
• Plug tester into tee on nozzle circuit to read pressure
• Goal is minimum 200 psi, per Pressure Engineering Rules
$7.50
$6.50
$12.75
Tools
• To make non-crimping clean cut on tubing
• Slimline nozzle wrench set
• #25070
• Used to disassemble and reassemble slimline nozzles during rebuilding
$9.50
• Winterization Air Compressor Adapter
• #20052
• Used in purge fluid from nozzle circuit during winterization
• Connect to portable air compressor
$5.00
2018 Full Dealer Program Catalog 11
• Replacement Nozzle Tip
• #10195
• Nozzle Ball and Spring
• #10197
• Union Coupling ¼”• #10175
• Rebuild clogged nozzles• Sold in bags of 100
• Repair leaks in ¼” tubing• Sold in bags of 10
$42.50
$36.00
$26.00
Service Parts
• To swap for clogged nozzles• Clean then rebuild with balls and springs
($.36 apiece)
• Nozzle Circuit Filter Element
• #16020
• Replacement element for nozzle circuit filter
• Replace element annually• Sold in packs of 5 elements
$15.00
2018 Full Dealer Program Catalog 12
• Door Hanger• #30130
• Proposal folders with inserts
• #30145
• Quad Fold Brochure• #30110
• Present your proposal in this high quality folder
• Contains inserts that explain misting, differentiates MistAway’s equipment and addresses questions about insecticide
• Sold in boxes of 10
• Full color on high quality stock• May be personalized with Dealer
Name/Logo/Contact info with clear labels• Sold in packs of 50
$12.50
$26.00
$12.50
Marketing Collateral
• Full color on high quality stock• May be personalized with Dealer
Name/Logo/Contact info with clear labels• Sold in packs of 50
• iMistAway insert• #30153
• For use in proposal folder• Describes iMistAway and addresses cyber-
security
$10.00
• “Authorized MistAway Dealer” Auto Door Magnet
• #30175
• 16” x 11” oval $5.00
2018 Full Dealer Program Catalog 13
top related