2012 crs autocad commands - productionist

CRS AUTOCAD

COMMANDS [Z:TEMPLATE/CADTRAINING/2012_CRS AUTOCAD COMMANDS]

PURGE LAYERS

COMMAND SHORTCUT USE/SETTINGS PURGE PU

AUDIT AUDIT

Run Purge before closing/print (always save frequently) a file to get rid of any extraneous layers not in use.

CRS AUTOCAD

COMMANDS [Z:TEMPLATE/CADTRAINING/2012_CRS AUTOCAD COMMANDS]

DESIGN CENTER COMMAND SHORTCUT USE/SETTINGS

DESIGN CENTER CTRL+2 BRINGS UP DESIGN CENTER

Design center can be used for pulling pre-made design components

After selecting component hover over properties window to set: SECTION, ELEVATION view of component

CRS AUTOCAD

COMMANDS [Z:TEMPLATE/CADTRAINING/2012_CRS AUTOCAD COMMANDS]

VIEW COMMANDS COMMAND SHORTCUT USE/SETTINGS ZOOM Z “V” FOR VIEWMAX

“E” FOR EXTENTS

DRAW COMMANDS COMMAND SHORTCUT USE/SETTINGS LINE L DRAWS A LINE, DUH!

CRS AUTOCAD

COMMANDS [Z:TEMPLATE/CADTRAINING/2012_CRS AUTOCAD COMMANDS]

FUNCTION COMMANDS COMMAND SHORTCUT USE/SETTINGS F1 HELP

F2 COMMAND LINE WINDOW

F3 OSNAPS ON/OFF

F4

F5

F6

F7

F8 ORTHO

F9

CRS AUTOCAD

COMMANDS [Z:TEMPLATE/CADTRAINING/2012_CRS AUTOCAD COMMANDS]

MODIFY COMMANDS COMMAND SHORTCUT USE/SETTINGS EXTEND EX 1-SELECT LINE TO EXTEND TO,

2-SELECT LINE TO BE EXTENDED

TRIM TR TRIM LINE, THEN TRIM LINES

**NOTE CAN HOLD SHIFT KEY IN

THESE COMMANDS TO “SWITCH

THEM” TRIM BECOMES

COMMAND SHORTCUT USE/SETTINGS

ARRAY -AR RECTANGEL

SNAPANG SNAPANG

CRS AUTOCAD

COMMANDS [Z:TEMPLATE/CADTRAINING/2012_CRS AUTOCAD COMMANDS]

DIMENSION COMMANDS COMMAND SHORTCUT USE/SETTINGS

SETTING UP A DRAWING FOR DIMENSIONS

1. SELECTING A SCALE—WHAT IS THE FINAL DRAWING SUPPOSE TO BE?

CRS AUTOCAD

COMMANDS [Z:TEMPLATE/CADTRAINING/2012_CRS AUTOCAD COMMANDS]

XREF

CRS AUTOCAD

COMMANDS [Z:TEMPLATE/CADTRAINING/2012_CRS AUTOCAD COMMANDS]

VIEWPORTS SELECT VIEWPORT AND THEN CHECK PROPERTIES

This is how you set up the scale for a specific viewport. Make sure you have the viewport selected in

paperspace.

CRS AUTOCAD

COMMANDS [Z:TEMPLATE/CADTRAINING/2012_CRS AUTOCAD COMMANDS]

OPENING XREF WHILE IN PAPERSPACE

WHILE VIEWPORT IS ACTIVE SELECT XREF DRAWING AND THEN RIGHT CLICK, OPEN XREF

CRS AUTOCAD

COMMANDS [Z:TEMPLATE/CADTRAINI

OPENING XREF WHILE IN PAPERSPACE

Setting up text style.

1. Type: “style” in command line

2. Set drawing scale to ¼” or what ever you need in

Model Space.

3. Set to 10PT style.

4. Set to annotative.

This will help setting up dimension text to the correct size, from and xref in model space, through a view port to paper

space.

Z:TEMPLATE/CADTRAINING/2012_CRS AUTOCAD COMMANDS

OPENING XREF WHILE IN PAPERSPACE

Setting up text style.

Type: “style” in command line

Set drawing scale to ¼” or what ever you need in

Model Space.

Set to 10PT style.

Set to annotative.

This will help setting up dimension text to the correct size, from and xref in model space, through a view port to paper

COMMANDS]

Set drawing scale to ¼” or what ever you need in

This will help setting up dimension text to the correct size, from and xref in model space, through a view port to paper

CRS AUTOCAD

COMMANDS [Z:TEMPLATE/CADTRAINING/2012_CRS AUTOCAD COMMANDS]