1. reminder of symbols 2. dialog boxes 3. listdlg() 4. msgbox() 5. questdlg() 6. menu() dialog boxes...

1. Reminder of Symbols

2. Dialog Boxes

3. listdlg()

4. msgbox()

5. questdlg()

6. menu()

Dialog BoxesApplications of Cell-Arrays

1

1. Reminders on Symbols

Creating/hard-coding: Braces { } Referencing to content: Braces { }

Augmenting: Brackets [ ]

Referencing to container: Parentheses ()

Most likely to be used!

2

2. Dialog Boxes

33

2. Dialog Boxes

Dialog boxes are “popup windows” that allows us another means to communicate with the user.

Some dialog boxes to collect input:

inputdlg(), listdlg(), menu(), questdlg()

And some to produce output:

msgbox(), warndlg()

99% of the time, the command deals with cell arrays, either as arguments, as return-values, or both!

44

3. listdlg()

listdlg() – Create and open list-selection dialog box

Major Advantage:

User does not have

to type anything

Less spelling

errors!

5

>>doc listdlg() <enter>

This function returns 2 return-values.

6

[Selection,ok] = listdlg('ListString',S)

Selection is a vector of indices of the selected strings

(in single selection mode, its length is 1). Selection is [] when ok is 0. ok is 1 if you click the OK button, or 0 if you click the Cancel button or close the dialog box. Double-clicking on an item or pressing Return when multiple items are selected has the same effect as clicking the OK button. The dialog box has a Select all button (when in multiple selection mode) that enables you to select all list items.

7

listdlg() return-values

What will the first return-value be after this executes?

a. {'Primary Booster','Secondary Boosters'}

b. [1 3]c. {1, 3}d. None of the above

8

[Selection,ok] = listdlg('ListString',S)

Selection is a vector of indices of the selected strings

(in single selection mode, its length is 1). Selection is [] when ok is 0. ok is 1 if you click the OK button, or 0 if you click the Cancel button or close the dialog box. Double-clicking on an item or pressing Return when multiple items are selected has the same effect as clicking the OK button. The dialog box has a Select all button (when in multiple selection mode) that enables you to select all list items.

If user hits cancel or closes the dialog box, an empty-vector is returned, AND ok is set equal to 0.

This means the second return-value can be used to see what the user did!

9

What did user do?

Did user hit ok? Did user hit cancel?

Either way: Had s/he selected anything anyway?

If user did click ok, then ok will be true, which equals 1. If user did not click ok, then ok will be false, which equals 0.

10

Inputs are in parameter/value pairs (i.e. they go 2 by 2):

Parameter goes 1st, value of the parameter goes 2nd.

[Selection,ok] = listdlg('ListString',S)

The actual string:

11

myList is a CELL ARRAY of string: { }

Why cell arrays?

The length of each selection varies widely, and an regular-array would not be rectangular.

Experiment in the command window!

12

Experiment in the command window!

What button did the user hit?

a. The 'ok' button

b. The 'cancel' button

c. The [x] that closes the window

d. Either b or c

e. None of the above

13

A second parameter

Though additional arguments are not necessary, you may choose to add them AS A PAIR. For example:

14

2nd PAIR of inputs.

15

The Select All button is gone.

2nd PAIR of inputs.

16

What did the user select?

a. It cannot be determined

b. __________________________

17

3.a. Full Example

Create a software that estimates the time an aircraft takes to travel a certain distance.

Aircrafts possible, with their average speeds are:

1) Cessna 150, 198 kmph

2) Boeing 787, 950 kmph

3) Concorde, 2147 kmph

4) Cessna 421, 444 kmph

18

Algorithm

%prompt user for type of airplane (error?)%prompt user for distance to travel (error?)

%calculate/display

Presented is the evolution from: Option1: use input() and if. (week 2,3.4) Option2: use input() and vectors. (week 10) Option3: using listdlg(), vectors and cell-arrays.

19

#1. input(), if and while

%prompt user for type of airplanetype = input('Enter the type of airplane: \n1 – cessna

150\n 2-Boeing 787\n3-Concorde\n4-Cessna 421\n Enter now: ');

%prompt user for distance to traveldistance = input('Enter the distance (km): ');

%calculate/displayif type == 1 %cessna 150

travelTime = distance/198;fprintf('With this plane, it will take %.2fhrs.\n', travelTime);

elseif….

20

Add while loops to trap errors.

#2. input(), vectors, while

%prompt user for type of airplanetype = input('Enter the type of airplane: \n1 – cessna

150\n 2-Boeing 787\n3-Concorde\n4-Cessna 421\n Enter now: ');

%prompt user for distance to traveldistance = input('Enter the distance (km): ');

%data base of speedsspeeds = [198, 950, 2147, 444];

%calculate/displaytravelTime = distance/speeds(type);fprintf('With this plane, it will take %.2fhrs.\n',

travelTime);21

Add while loops to trap errors.

Reference the correct value in the vector, using the index.

#3. listdlg(), arrays, while

%prompt user for type of airplanemyPlanes = {'Cessna 150', 'Boeing 787', 'Concorde',

'Cessna 421'};type = listdlg('ListString', myPlanes,'selectionmode',

'single');

%prompt user for distance to traveldistance = inputdlg('Enter the distance (km): ');

%data base of speedsspeeds = [198, 950, 2147, 444];

%calculate/displaytravelTime = distance/speeds(type);fprintf('With this plane, it will take %.2fhrs.\n',

travelTime);22

Add while loop to trap errors, and convert to number

Reference the correct value in the vector, using the index.

#3. Output

Note: once a software starts with dialog boxes, it should end with dialog boxes…

>> not in the command window..

23

4. msgbox()

A little improvement:

%calculate/displaytravelTime = distance/speeds(type);resultString = sprintf('With this plane, it will

take %.2fhrs.\n', travelTime);msgbox(resultString)

24

4. msgbox()

A little improvement:

%calculate/displaytravelTime = distance/speeds(type);resultString = sprintf('With a %s, it will take

%.2fhrs.\n', ??????, travelTime);msgbox(resultString)

25

Task: Replace "this plane" by the actual name!

4. msgbox()

%prompt user for type of airplanemyPlanes = {'Cessna 150', 'Boeing 787', 'Concorde',

'Cessna 421'};type = listdlg('ListString', myPlanes,'selectionmode',

'single');

Remember: this is the index (i.e. location) of the string selected.

This is the cell-array of all the names.

To reference the name selected using the index selected:

planeSelected = myPlanes{type};

26REFERENCE the CONTENT, using curly braces.

4. msgbox()

A little improvement:

%calculate/displaytravelTime = distance/speeds(type);resultString = sprintf('With a %s, it will take

%.2fhrs.\n', myPlanes{type}, travelTime);msgbox(resultString)

27

Make the software error proof!

%prompt user for type of airplanemyPlanes = {'Cessna 150', 'Boeing 787', 'Concorde',

'Cessna 421'};[type ok] = listdlg('ListString',

myPlanes,'selectionmode', 'single');

%if user hits ok, continueif ok==1

%prompt user for distance to traveldistance = inputdlg('Enter the distance (km): ');%code as before

else%user hit cancel of closed box..%do other stuff

end 28

Done with that example.

Note how much a software has improved since your first knowledge of week2, and yet not too many lines of code were required.

Hopefully, you're pausing and coding this in parallel.

Use them in the final project if you want. Make sure to error-proof accordingly.

29

5. questdlg()

Typical call:

button = questdlg('qstring','title','str1','str2',

'str3','default')

qstring = Question to ask the user title = Title for dialog box str1 = String to show on Button #1 str2 = String to show on Button #2 str3 = String to show on Button #3 default = String that is the default button button = string on the button that was clicked

Caution: Maximum of 3 buttons.

30

5. Quick experiment

button = string on the button that was clicked

31

6. menu() – vertical menu

Typical call:button = menu('qstring','bt1','bt2',……,'btn')

qstring = question to ask user bt1 = String to show on Button #1 bt2 = String to show on Button #2

Can have as many options as desired. There is no default answer. Return value: Button number clicked (not the string)

32

6. menu(), with cell-arrays

33

6. Output

34

What's next???

Yes, we are done with cell-arrays and dialog boxes.. So what's next? Files!

35

Wrapping Up

Dialog boxes are user friendly but time taking Dialog boxes should not be used when the software is

not meant to be sold. Lots of clicking vs. entering data in the command window. Choose carefully.

We saw: inputdlg() listdlg() msgbox() questdlg() menu()

NEVER learn the syntax by heart. Practice it enough, then use the doc to remind yourself quickly!

36