1 lecture 4 work, electric potential and potential energy ch. 25 topics work, electric potential...

1

Lecture 4 Work, Electric Potential and Potential Energy Ch. 25

• Topics• Work, electric potential energy and electric potential• Calculation of potential from field• Potential from a point charge• Potential due to a group of point charges, electric dipole• Potential due to continuous charged distributions• Calculating the electric field from a potential• Electric potential energy from a system of point charges• Equipotential Surface• Potential of a charged isolated conductor

• Demos• Teflon and silk• Charge Tester, non-spherical conductor, compare charge density at different radii.

•Elmo•Potential in the center of four charges•Potential of a electric dipole

• Polling

2

W =

rF⋅drs

i

f

∫ = qrE ⋅drs

i

f

∫

ΔU = −W

3

ΔV =ΔUq

4

Work, Potential Energy and Electric Potential

• The electric force is mathematically the same as gravity so it too must be a conservative force. We want to show that the work done is independent of the path and only depends on the endpoints. Then

the force is said to be a conservative force.

• First start with work Work done by the electric force =

• Then we will find it useful to define a potential energy as is the case for gravity.

• And the electric potential

W =

rF⋅drs

i

f

∫ = qrE ⋅drs

i

f

∫

ΔV =ΔUq

ΔU = −W

5

Lets start with a uniform electric field and find the work done for a positive test charge.

b

a

E

P2 P3

P1

c

W = q

rE ⋅drs

i

f

∫ =qEcosq s

6

Find work done along path W12 for a positive test charge

b

a

E

P2 P3

P1

c

F

W12 =0W12 =qEcos90 a

W = q

rE ⋅drs

i

f

∫ =qEcosq s

ds

7

Find Work along path W23

b

a

E

P2 P3

P1

c

F

W23 =qEb

W = q

rE ⋅drs

i

f

∫ =qEcosq s

W23 =qEcos0 b

ds

8

W12 + W23 = 0 + qEb =qEb

Compare this work done along path W13

9

Work done along path W13

b

a

P2 P3

P1

c

Fq

W13 =qEcosq c=qE

bcc=qEb

W = q

rE ⋅drs

i

f

∫ =qEcosq s

q

ds

10

Conclusion• Work done along path W12 + W23 = W13.

• Work is independent of the particular path.• Although we proved it for a uniform field, it is true for any field that is a only a function of r and is along r.• It only depends on the end points i and f.

•This means we can define a function at every point in space and when we take the difference of that function between any two points, it is equal to the negative of the work done.

11

b

a

P2 P3

P1

c

Fq

When we go from P1 to P3 we evaluate the Work function at P3 and subtract the value at P1 and then the a difference equals the negative of the work done in going form P1 to P3. This function is called the potential energy function

12

Example of finding the Potential Energy Function U in a Uniform Field

What is the electric potential difference for a unit positive charge moving in an uniform electric field from a to b?

E

Ed

a b

ΔU =Ub −Ua = −W = − q

rE ⋅drs

a

b

∫ = −Eq dxa

b

∫ = −Eq(xb − xa)

ab UUU −=Δ

If we set the origin at xb = 0, and measure from b to a, then

ΔU = qEd

This is analogy with gravitation where we U =mgh.

Ub=0 and the potential energy function is U=qEd

13

Now define the Electric Potential Difference ΔV which does not depend on charge.

ΔV =ΔUq

ΔU = −W

ΔV =−Wq0

• The potential difference is the negative of the work done per unit charge by an electric field on a positive unit charge when it moves from one point to another.

14

ΔV = Ed

ΔV =ΔUq

ΔV =qEdq

For a battery of potential difference of 9 volts you would say that the positive terminal is 9 volts above the negative terminal.

ΔU = qEd

Find the potential difference ΔV for a uniform electric field

15

Note relationship between potential and electric field

• V is a scalar not a vector. Simplifies solving problems.

• We are free to choose V to be 0 at any location. Normally V is chosen to be 0 at the negative terminal of a battery or 0 at infinity for a point charge.

ΔV =

−Wq0

= −rFq0

⋅drs∫ = −rE ⋅drs∫ dV =−Edx

E =−dV / dx

16

Example for a battery in a circuit• In a 9 volt battery, typically used in IC circuits, the

positive terminal has a potential 9 v higher than the negative terminal. If one micro-Coulomb of positive charge flows through an external circuit from the positive to negative terminal, how much has its potential energy been changed?

q

17

Generalize concept of electric potential energy and potential

difference for any electric field

18

(independent of path, ds)

Therefore, electric force is a conservative force.

= - Work done by the electric force = −

rF ⋅drs

i

f

∫ΔU =U f −Ui

qUV Δ=Δ

ΔV = Vf −Vi = −rE ⋅drs∫

y

x

19

Find the electric potential when moving from one point to another in a field due to a point charge?

ΔV = −rE ⋅drr∫

rE =

kqr2

r

Vf −V i =−

rE⋅drr

i

f

∫

20

Vf −V i =−

rE⋅drr

R

∞

∫ =−kqcos0o 1r2

dR

∞

∫ r=kq1r R

∞

=kq(1∞−1R)

RkqV =

041πε

=k

eqn 25-26

Replace R with r

V =1

4πε 0

qr

Vf −V i =0−V i =−kqR

Potential of a point charge at a distance R

Vf −V i =−

rE⋅drr

i

f

∫

21

Electric potential for a positive point charge

V (r) =kqr

r= x2 + y2

• V is a scalar• V is positive for positive charges, negative for negative charges.

• r is always positive.

• For many point charges, the potential at a point in space is the simple algebraic sum (Not a vector sum)

22

Hydrogen atom. • What is the electric potential at a distance of 0.529 A from the proton? 1A= 10-10 m

Electric potential due to a positive point charge

r = 0.529 A

•What is the electric potential energy of the electron at that point?

V =kqR

=8.99 ×109 Nm 2

C2( )×1.6 ×10−19C

.529 ×10−10m

V =27.2JC

=27.2V olts

U = qV= (-1.6 x 10-19 C) (27.2 V) = - 43.52 x 10-19 Jor - 27.2 eV where eV stands for electron volt.Note that the total energy E of the electron in the ground state of hydrogen is - 13.6 eVAlso U= 2E = -27.2 eV. This agrees with above formula.

23

What is the electric potential due to several point charges?

For many point charges, the potential at a point in space is the simple algebraic sum (Not a vector sum)

⎟⎠⎞⎜⎝

⎛ ++=3

3

2

2

1

1

rq

rq

rqkV

V =kqi

rii∑

r1

xr3

y

r2

q1q2

q3

24

Four Point charges

25

What is the potential due to a dipole?

Two point charges that are opposite and equal

26

Potential for a Continuous Distribution of Charge

Point charge

For an element of charge

Integrate

rkqV =

rkdqdVdq = ,

∫= rkdq

V

27

Chaper 24 Problem 22. With V = 0 at infinity, what is the electric potential at P, the center of curvature of the uniformly charged nonconducting rod?

28

Chapter 24 Problem 26. What is the magnitude of the net electric potential at the center? 1. A thin rod of charge -3.0 µC that forms a full circle of radius 6.0 cm2. A second thin rod of charge 2.0 µC that forms a circular arc of radius 4.0 cm, subtending an angle of 90° about the center of the full circle3. An electric dipole with a dipole moment that is perpendicular to a radial line and that has magnitude 1.28 x 10-21 C·m

29

30

Figure 24-44 shows a thin plastic rod of length L and uniform positive charge Q lying on an x axis. With V = 0 at infinity, find the electric potential at point P1 on the axis, at distance d from one end of the rod.

31

32

Potential due to a ring of charge• Direct integration. Since V is a scalar, it is easier to evaluate V than E.

• Find V on the axis of a ring of total charge Q. Use the formula for a

point charge, but replace q with elemental charge dq and integrate.

Point charge

For an element of charge

r is a constant as we integrate.

This is simpler than finding E because V is not a vector.

rkqV =

rkdqdVdq = ,

∫= rkdq

V

Q)Rz(

kV22 +

=⇒∫+

= dqRz

k)( 22

∫+

=)( 22 Rz

kdq

33

Potential due to a line charge

rdqkdV =

We know that for an element of charge dq the potential is

rdxkVd ,So l=

For the line charge let the charge density be l. Then dq=ldx

22 dxr ,But +=

22 dxdxkVd ,Then+

l=

Now, we can find the total potential V produced by the rod at point P by integrating along the length of the rod from x=0 to x=L

∫∫∫+

l=+

l==L

022

L

022

L

0 dxdxk

dxdxk VdV ⇒ V = kλ ln(x + x2 + d 2 )

0

L

)dln)dLL(ln(k Vo,S 22 −++l= or, V =kllnL+ L2 + d 2

d

⎛⎝⎜

⎞⎠⎟

34

A new method to find E if the potential is known. If we know V, how do we find E?

So the x component of E is the derivative of V with respect to x, etc.–If V = a constant, then Ex = 0. The lines or surfaces on which V remains constant are called equipotential lines or surfaces.–See example on next slide

ΔV = −rE ⋅drs∫

dV =−rE⋅drs

dzdVE

dydVEdxdVE

z

y

x

−=

−=

−=

dzEdyEdxEdV zyx −−−=

drs =idx + jdy+ kdz

rE =Exi + Eyj+ Ezk

35

Equipotential Surfaces

• Three examples

• What is the equipotential surface and equipotential volume for an arbitrary shaped charged conductor?

• See physlet 9.3.2 Which equipotential surfaces fit the field lines?

36

a) Uniform E field

V = constant in y and z directions

b) Point charge

(concentric shells)

c) Electric Dipole

(ellipsoidal concentric shells)

E =Ex,Ey =0,Ez =0

Ex =−dVdx

V =−Exd

Blue lines are the electric field lines

Orange dotted lines represent the equipotential surfaces

x

37

Electric Potential Energy U of a system of charges

How much work is required to set up the arrangement of Figure 24-46 if q = 3.20 pC, a = 54.0 cm, and the particles are initially infinitely far apart and at rest?

q1q2

q3q4

W = U

U =k(q1q2

r12+q1q3

r13+q1q4

r14+q2q3

r23+q2q4

r24+q3q4

r34)

U =k(−qqa

+qq2a

−qqa

−qqa

+qq2a

−qqa)

U =k(−4q2

a+2q2

2a)

38

• E1

• E2

39

Dielectric Breakdown: Application of Gauss’s Law

If the electric field in a gas exceeds a certain value, the gas breaks down and you get a spark or lightning bolt if the gas is air. In dry air at STP, you get a spark when

E ≥3×104 Vcm

12

V = constant on surface of conductor Radius r2

r1

40

This explains why:• Sharp points on conductors have the highest electric fields and cause

corona discharge or sparks.

• Pick up the most charge with charge tester from the pointy regions of the non-spherical conductor.

• Use non-spherical metal conductor charged with teflon rod. Show variation of charge across surface with charge tester.

Van de Graaff+ + + +

- - - -

Radius R

1

2

V = constant on surface of conductor

Cloud

41

How does a conductor shield the interior from an exterior electric field?

• Start out with a uniform electric fieldwith no excess charge on conductor.Electrons on surface of conductor adjustso that:

1. E=0 inside conductor2. Electric field lines are perpendicularto the surface. Suppose they weren’t?3. Does E = just outside the conductor4. Is s uniform over the surface?5. Is the surface an equipotential?

6. If the surface had an excess charge, how would your answers change?

0εs

42

What is the electric potential of a uniformly charged circular disk?

We can treat the disk as a set of ring charges. The ring of radius R’ and thickness dR’ has an area of 2πR’dR’ and it’s charge is dq = sdA = s(2πR’)dR’ where s=Q/(πR2), the surface charge density. The potential dV at point P due to the charge dq on this ring given by

Integrating R’ from R’=0 to R’=R

q

dV =kdq

(z2 + (R ')2 )

dV =ks2πR 'dR '

(z2 _(R ')2 )⇒

V =ks2πR 'dR '

(z2 + (R ')2 )0

R

∫

⇒ V = 2kσπ ( z2 + R2 − z)

43

Chapter 24 Problem 19

The ammonia molecule NH3 has a permanent electric dipole moment equal to 1.31 D, where 1 D = 1 debye unit = 3.34 x10-30 C·m. Calculate the electric potential due to an ammonia molecule at a point 44.0 nm away along the axis of the dipole. (Set V = 0 at infinity.)

44

Chapter 24 Problem 55 Two metal spheres, each of radius 1.0 cm, have a center-to-center separation of 2.2 m. Sphere 1 has charge +2.0 x 10-8 C. Sphere 2 has charge of -3.8 x10-8 C. Assume that the separation is large enough for us to assume that the charge on each sphere is uniformly distributed (the spheres do not affect each other). Take V = 0 at infinity.

(a) Calculate the potential at the point halfway between the centers.(b) Calculate the potential on the surface of sphere 1.(c) Calculate the potential on the surface of sphere 2.

45

46

Chapter 24 Problem 57 A metal sphere of radius 11 cm has a net charge of 2.0 x10-8 C.

(a) What is the electric field at the sphere's surface?(b) If V = 0 at infinity, what is the electric potential at the sphere's surface?(c) At what distance from the sphere's surface has the electric potential decreased by 500 V?

47