© 2007 neoaccel, inc. neoaccel sgx installation guide dear customer: we are pleased to provide you...

© 2007 NeoAccel, Inc.

NeoAccel SGX Installation Guide

Dear Customer:We are pleased to provide you with our training presentation for our SSL VPN-Plus installing and license configuration to help you with your deployment.

--The NeoAccel Support Team

© 2007 NeoAccel, Inc.

SGX Installation Guide page 3License Upgrade Guide page 13

Table of Contents

© 2007 NeoAccel, Inc.

NeoAccel SSL VPN-Plus™

SGX Installation Guide

4

Prerequisites to Get Started

• SSL VPN-Plus SGX Appliance(s)• SGX-800• SGX-1200• SGX-2400

• A Desktop or Laptop connected to same switch as the SGX appliance

• Management Console• Require JRE 1.4.2 or above on administrator’s PC

• SSL VPN-Plus Access Terminals• WAT: IE 5.0 & above, Firefox, Safari, NetScape• QAT: Windows 2000 & above• PHAT: Windows 2000 & Above, WinCE 5.0 & above Red

Hat 9.0, Red Hat EL 3, Knoppix, Debian, MAC OSX 10.3, 10.4, 10.5

5

• Connect the power cable. Connect network cable to eth0

Powering ON the device

Eth0: 192.168.10.230

Eth0: 192.168.10.230

Eth0: 192.168.10.230

SGX800

SGX1200

SGX2400

6

Connecting to the Gateway

• Power on the SGX appliance

• Connect a desktop to same switch the SGX is connected to OR use a cross over cable to directly connect to eth0 port on SGX

• Add one additional IP address to your desktop, say 192.168.10.200

• If ping is allowed in network, try ping to 192.168.10.230.

7

Access Management Console

Open the default browser on your machine and visit the following URL to open the SSL VPN-Plus Management Consolehttps://192.168.10.230/sslvpn-plus/nmcDefault credentials are admin/admin.

If your desktop does not have Java 1.4.2 or above, it will redirect you to download Java on your machine.

8

Networking Setup

• Go to INTERFACE screen and change the IP address as per your network

• If you want to connection the SSL VPN-Plus appliance in dual ARM mode• Select eth1 as “private network”• Say apply to apply changes• Uncheck “single ARM mode” for neoeth0• Say apply to apply changes

• For any other routing changes, please create routers from ROUTE screen

9

Licensing Setup

• NeoAccel runs an online license server to provide license to customers

• You need SSN (Software Serial Number) and password to get a license from license server

• To get a license of SSL VPN-Plus, open management console and go to LICENSE screen.

• Follow the instructions on screen to get/update license

• Please refer to attached “Licensing guide” for more details.

10

Deployment Options

Single ARM Mode in DMZ Parallel to Firewall

Internet RouterInternet

SSL VPN-Plus Gateway

Internal Network

Internal Workstation

Internal Server

External Firewall

eth1

Internet RouterInternet

SSL VPN-Plus Gateway

Internal Network

Internal Workstation

Internal Server

External Firewall

eth1

eth0

11

Deployment Options

Internal DMZ

Internet RouterInternet

SSL VPN-Plus Gateway

Internal Network

Internal Workstation

Internal Server

External Firewall

Firewall: DMZeth1

eth0Internet RouterInternet SSL VPN-Plus

Gateway

Internal Network

Internal Workstation

Internal Server

External Firewall

Firewall: DMZ

eth1

eth0

External DMZ

12

Access SSL VPN-Plus Portal

• Open URL: https://<WAN side IP address of gateway machine>/sslvpn-plus/• Example: https://vpn.corporate.net/sslvpn-plus/

© 2007 NeoAccel, Inc.

NeoAccel SSL VPN-Plus

License Upgrade Guide

14

• Licensing based upon• Number of days• Maximum concurrent users• SSL VPN-Plus features

•Two types of licenses• Registered: Variable parameters• Evaluation: 30 days, max 25 users

• Global license server: https://utils.sslvpn-plus.net/sslvpn-plus/users/ • License management through management console

SSL VPN-Plus Licensing

15

• You need the Software Serial Number (SSN) and password to access NeoAccel License Server• The SSN no. and password are specified on the one page main document you have got with the appliance.

• If you need any help with licensing write to license@neoaccel.com or call Technical Support at

+1.408.436.1000

• To get the license you need Internet connectivity from your desktop from where you are logged on to NeoAccel management Console.

Prerequisites

16

#1: Open Management Console

Login into Management console

17

Go to License management screen. If license has expired, a warning message will be shown

#2: Visit License Management Screen

18

Click on update button to update license

#3: Update License

Enter your SSN No. and click OK to generate license request.

19

#4: License Request Generated

Click on “Open License Server to go to NeoAccel License

Server

Click on “copy to Clipboard” to copy the license request string

displayed in the control

20

#5: Visit License Server

A new browser window is opened in the default browser.

If you have Firefox set as default browser, please copy

the URL in the address bar and use Internet Explorer to open

the license server page.

Enter your SSN and password to enter license server

21

#6: License Request Posting Page

You need to copy the license request from management

console here.

22

#7: Post License Request

Copy the license request from management console to license

server page.

Click on submit button to generate license key.

23

#8: License Key is Generated

This is your license key which you need to copy to

management console screen.

24

#9: Apply License Key

Copy the license key from license server page to management console.

Click Ok button to apply the license

25

#10: License is Updated

Updated license information is displayed here.

26

CORPORATE HEADQUARTERS NeoAccel, Inc.4340 Stevens Creek Blvd, Suite 275San Jose, CA 95129 USA

TEL: +1 408 274 8000FAX: +1 408 274 8044

EMAIL info@neoaccel.com

Contact NeoAccel

TECHNICAL SUPPORT   email: support@neoaccel.com   phone: 408.436.1000

LICENSE SUPPORT   email: license@neoaccel.com   phone: 408.436.1000