8/14/2019 AML710 Computer Aided Design Minor II Semester

1/2

AML710 ComputerAided DesignMinor II Semester II - Session 2007-08Time: 1hr Marks: 25Note: Answer all the questions. InQ1 some answers may not be unique.

I. Give short appropriate answers to thefollowing questionsa) The only requirement for knot vectors is that is-amonotonically increasing series of 1,./b) The param~tric equation of an origin centered hemisphere is and the range of each / '~tw> ~,/1>(

1(\

"i'- 'l,.,

8/14/2019 AML710 Computer Aided Design Minor II Semester

2/2

maximum moment this beam coulc carry, if the compression flange is torsionally restrained at the,~ndsonly and if

the cover plates are provided one on each flangeboth the cover plates are provided on the compression side and one of them is curtailed at2 m from either end.

The Flange Plates are connected to the beamby 22mm dia rivets, 2 rivets on a section in each case.12) In both the cases above, what are the maximum width of cover plate that would be allowed for

plate thickness of 15mm.

a)b)

;

/"

21i1" ItN350 ~~.j

J. /fiJI, +++of+++

ISHB 2000 '0 kg/mFig. 6-20 Bracktt Connection

15

5