amita fog machine

GUSTO PROFESSIONAL SERIESGUSTO series, DMX digital foggers, establish their eminence in the market with unique innovation and

professional technique. Thanks to their high security and easy maintenance, GUSTO series are perfectly

adapted for locations of professional performance. There are our optional models: GT-1000, GT-1250,

GT-1800 and GT-3500, with the following characteristics:

Sharp ModularizationThe entire machine is assembled with a heating module, a pump module and a circuit module. The

innovative design completely solves the problem that the circuit and other parts interfere with one another

while dismantling for maintenance or repair. Each of the three modules is independent, and does not affect

the others, and that is what makes the maintenance so direct and easy. At the same time, you can easily

disassemble the lateral sides to take out the broken heating module or the pump module, or the rear side to

replace the circuit module. Such intelligent and ideal design makes the maintenance most humanized and

simple.

SecurityThe die-cast heating module is perfectly covered and sealed with iron shell. Even under such circumstances as

the fixture is over heating or the secure parts is out of control, no hazard will happen. Furthermore, the low-

liquid sensor detects shortage of liquid and warns the pump to cut oil supply automatically so as to prevent

from damaging or accidentally firing.

High Efficiency The die-cast heating module fastens heat transmission and therefore, shortens the heating cycle. The

break-through design of double heating pipes for GT-1800 & GT-3500 even enhances significantly the heating

efficiency.

Economical Power ConsumptionPower-saving device enables GT-1800 and GT-3500 to cut automatically power consumption during stand-by,

which impressively realizes power saving up to 50%.

ConvenienceGUSTO is a series of DMX digital foggers which can be conveniently connected with other Foggers and DMX

stage equipment for operation. Besides, the series can be operated by exteriorly connected controllers (e.g.

TC-3, DC-3, DC-3S) to control fogging time and volume. Our high-quality fog liquid is a perfect match for the

series to maximize the fogging effect.

Professio

nal Fo

g

The entire machine is assembled with a heating module, a pump module and a circuit module. Each of the three modules is independent; makes the maintenance easy and convenient.

You can easily disassemble the rear side to replace whole circuit module. Efficient, Perfect, User-friendly

Capacitated for 3500W output volume, the extraordinary GT-3500 is a

masterpiece among the professional foggers, a representative resulting

from professional high-tech. The dual-aluminum heating pipes enhance

heat transmission efficiency, and enable you to create spectacular

fogging effect without much heating time. The innovative device for

economical power consumption can save energy up to 50%.

The built-in digital display controller (DC-3S) makes the operation of

GT-3500 direct and user-friendly, while the low-liquid-level sensor

guarantees operation security. Dual-piped heating module, innovative

design of easy-disassembly shell at three sides, and direct-replacement

of modules significantly improve maintenance efficiency as well as

operation safety.

Super-powerful GT-3500 creates spectacular effects without making any

noise. The innovative oil providing system performs vaporizing process

through one-piece jointless die-cast heating module and as a result,

reduces the possibility of nozzle blockage to minimum. Even when

emitting continuously as large volume as 50,000 cu.ft/min,

the fogger still works in perfect order. Use our non-toxic high-quality

water-based liquid to maximize the fogging effect, and you

can relax and enjoy the stage performance.

GT-3500 is distinguished for its excellent

quality and perfect capability. Our

innovation continuously improves its

operation safety and makes

it the first choice

for all large stage

performance.

GUSTO Series–GT-3500

DC-3S, the built-in digital display controller makes the operation of GT-3500 direct and user-friendly. The cable of DC-3S is 10m.

Product specificationsPOWER 3300W

FUSE(230V,240V) NFB 16A

Warm Up time(min) 12

Fog Output (cu.ft/min) 50000

Tank (liters) 6.5

Bracket YES

Dimensions (LxWxH, W/Handle) 663x300x249 mm

Weight (kg) 18.5kgs

Voltage 230V, 240V /50Hz

DMX512 CH. DMX 1CH or 3CH

Matching Controller (Optional) DC-3, DC-3S

Matching Controller (Included) Built-in DC-3S

* Voltage is preset at factory and may not be changed.

Professio

nal Fo

g

Economical, Noiseless, SecureOne of the traits that distinguish GT-1800 from other foggers is the

advanced device for economical power consumption. When the

machine is standing by, it perfectly handles the heat exchange and

automatically decreases power rate up to 50%. It is unquestionably an

energy-saving expert.

Dual-piped heating module, upgraded from the single-heating-pipe

design, accelerates the speed of heat transmission and substantially

improves the heating efficiency.

Innovative oil providing system performs vaporizing process through

one-piece jointless die-cast heating module, and significantly reduces

the possibility of nozzle blockage, resulting in more purified smoke that

reflects much better visual lighting effect.

In addition to the protection by the patented low-liquid-level sensor

which automatically stops the pump when short of liquid, the design

of separating the liquid tank from the fixture itself allows the tank to

be taken off freely without breaking any wires. All the designs aim to

provide you with the maximum safety.

GT-1800, featuring economical power consumption, noiselessness

in operation and abundant production of dense fog, perfects every

performance in any large theatre or conference, and even fire drills.


Dual-piped heating module accelerates the speed of heat transmission and substantially improves the heating efficiency.

The patented low-liquid-level sensor which automatically stops the pump when short of liquid.

DC-3S, the built-in digital display controller makes the operation of GT-3500 direct and user-friendly. The cable of DC-3S is 10m.

Product specifications POWER 1700W

FUSE(120V) NFB 16A

FUSE(230V,240V) NFB 9A

Warm Up time(min) 5


Tank (liters) 6.5

Bracket YES

Dimensions (LxWxH, W/Handle) 613x300x249 mm

Weight (kg) 14kgs

Voltage 120V, 230V, 240V 50/60Hz


Matching Controller (Optional) DC-3, DC-3S

Matching Controller (Included) Built-in DC-3S


Professio

nal Fo

g


FUSE(120V) 13A

FUSE(230V,240V) 7A

Warm Up time(min) 7


Tank (liters) 2

Bracket YES

Dimensions(LxWxH, W/Handle) 418x220x209mm

Weight (kg) 7.5kgs

Voltage 120V, 230V, 240V 50/60Hz


Matching Controller (Optional) TC-3, DC-3

Matching Controller(Included) TC-3


The innovative circuit module design can easily disassemble the rear side to replace whole circuit module.

Operate with our timing controller, TC-3, to control fogging interval, duration and volume and have excellent fogging effect.


Fashionable, Professional, AdvancedGT-1250, a professional fogger, adopts the die-cast aluminum heating

module, which speed up heat transmission and therefore, shortens

its heating time. The heating module also significantly facilitates

maintenance and replacement.

With quick and steady fogging effect, the powerful GT-1250 matches

well with the vibrant light and music on the stage and electrify the

atmosphere. Moreover, the oil providing system performs vaporizing

process through jointless die-cast aluminum heating module, and

reduces the possibility of nozzle blockage to minimum.

The new generation of GT-1250 is characterized with easy disassembly

on three sides of shell, patented design of low-liquid-level sensor, and

special design of circuit module. All the advanced technology and bold

innovation make GT-1250 more secure, convenient and humanized.

Undoubtedly GT-1250 is an excellent performer in night clubs,

exhibitions, balls and even small theater, presenting the most vivid

atmosphere and effect.

Operate with our timing controller (TC-3) or digital display controller

(DC-3, plastic casing) to control fogging interval, duration and volume

and have excellent fogging effect. The powerful optional controllers

definitely make GT-1250 a more valuable choice.

Professio

nal Fo

g

Innovative, Safe, Easily-maintainedTechnically innovated and securely guaranteed, GT-1000 occupies an

indispensable position in the market, characterizing easy maintenance

and maximal operation safety.

With the innovative shell design featuring easy disassembly on three

sides, GUSTO series make maintenance most convenient and simple.

You can directly open the lateral sides to replace the heat module or

the pump module, or open the rear side to take off the broken circuit

module. The independent design of the three modules dramatically

facilitates the maintenance.

The patented low-liquid-level sensor automatically stops the pump from

providing oil once it detects lack of liquid. This outstanding feature not

only helps to avoid burning damage, enhancing operating security, but

also successfully separates the tank from the mechanism, allowing the

tank to be taken away from the fixture anytime without breaking any

connection.

Quality guaranteed by professional technology, GT-1000 creates an

amazing effect for a ball or an exhibition with its short heating time and

large fogging volume.


The patented low-liquid-level sensor which automatically stops the pump when short of liquid.

The entire machine is assembled with a heating module, a pump module and a circuit module. Each of the three modules is independent; makes the maintenance easy and convenient.


FUSE(120V) 12A

FUSE(230V,240V) 6A

Warm Up time(min) 4.5


Tank (liters) 2

Bracket YES

Dimensions(LxWxH, W/Handle) 378x220x209 mm

Weight (kg) 6kgs

Voltage 120V, 230V, 240V 50/60Hz

DMX512 CH. DMX 1CH

Matching Controller (Optional) LC-1X, RC-1X, TC-1X

Matching Controller (Included) LC-1X


Professio

nal Fo

g

Product specifications

Model AF-1700DX AF-1700SDXCase Color Black Silver

Power 1600W 1600W

DMX Channel 2CH 2CH

Built-in Function Timing – Duration & Interval Timing – Duration & Interval

Fuse (120V) NFB 20A NFB 20A

Fuse (230V) NFB 10A NFB 10A

Output (c.ft/min) 21000 21000

Tank (Liter) 5L 5L

Warm up time (min) 8 8

Voltage 120V/60Hz,230V,240V/50Hz 120V/60Hz, 230V,240V/50Hz

Dimensions(LxWxH, W/O Bracket) 435x280x295mm(W/Handle) 435x280x295 mm(W/Handle)

Weight 10.5 kg 10.5 kg

Matching Controller(Optional) LC-5, RC-5 or TC-3X LC-5, RC-5 or TC-3X


ATMOS DMX Fog Machine (AF-1700DX/AF-1700SDX)

ATMOS DMX fog machine is multi-function professional that has passed strict tests under imitated environments and certification of

safety regulations. DMX ON BOARD permits uses through connection to any DMX console. Built-in function of timing control allows

easy timing control through manual operation on the Duration & the Interval knobs.

ATMOS DMX professional is the most valuable fog machine that has been expected.

AF-1700DX/AF-1700SDX is equipped with die-cut heating module. Heating

transmission is more effective. Heating time of every fogging

circulation is shortened, and output (cu. Ft/min) based on the same

power is more abundant compared with other brand names. It can

also output continuously volumes of smoke. Problem of nozzle jam

will hardly happen.

ATMOS DMX professional has the vertical heating tube separated

from the bottom base. This design successfully blocks the noise. The

vertical heating tube occupies small space, which allows the machine to

have better volume for big and movable liquid tank, and to elevate its mobility

at the same time. When shortage of oil is detected, the safety function of low liquid

warning can automatically cut the power off of pump to prevent the interior parts from

being damaged, and to assure the safety of the machine and the using environment. Powerful output and volumes of dense smoke

puffed within a short time characterize ATMOS DMX professional as a master piece to perfectly animate performance of any large-scale

concert as well as launching ceremony. Strict and long-time environmental tests let ATMOS DMX professional be the very suitable product

used for concerts, displays, dance halls and firefighting maneuvers.

ATMOS DMX professional not only can accept DMX control, but also can select wire controller LC-5, wireless controller RC-5, or timer

TC-3X for easy control. Master/Slave synchronous control can be realized by the built-in timing control function or the optional controllers

(LC-5, RC-5 & TC-3X). Furthermore, the smoke effect can be flawless using high-quality fog liquid made by JyunYao.

Atmos DMX Fog Machines provide superior performance due to:• DMXonboard,operatebyanyadditionalDMXcontroller.

• Built-infunctionoftimingcontrolallowseasytimingcontrolthroughmanualoperationonthe

Duration & the Interval knobs. The indicating light on the back panel will indicate adjusted timing.

• Humanizedwarningfunctionforabnormalstatus:Incasethefoggerhasanyabnormal

functioning, the indicating light on the back panel will be flashing as warning to let the user be

aware of the problematic situation in time.

• Manualfoggingcanbeoperateddirectlyfromthebackpanelofthemachine.Manualfoggingis

prior to other fogging operations of the easy controller & built-in timing function. But when DMX

control is selected, all manual control functions stop.

• FoggingvolumecanbeadjustedunderDMXoperationmodeorbytheoutsideconnectedTC-3X

controller.

• Highoutputfogmachine,approx.21,000cu.ft/minoutput.

• ElectronicThermoSensing(ETS)–electronicheaterstayhotatalltimesbetweenfogblasts.

• Advancedheatersystem-aluminumdie-castheaterpreventsclogging.

• Advancedoil-levelsensordetectsshortageofoilandwarnsthepumptocuttheoilsupplyautomatically.

• Directthermalprotection.

• Master/Slavemodecanbeoperatedeitherbythebuilt-intimingcontrolorbyoutsideconnected

controller, LC-5, RC-5, or TC-3X. Simple and humanized design makes the fogger easier for use.

Fog

Mach

ine

ATMOS SERIESATMOS, a versatile effect-creator, produces a series of high-quality fog machine: AF-800/800S, AF-900/900S,

AF-1200/1200S and AF-1700/1700S .

The smart and compact series feature the unique die-cast-aluminum heater system for faster and more efficient heat transfer,

allowing them to produce dense fog continuously and reducing the possibility of nozzle blockage to minimum. The unique

design makes ATMOS series ultra-quiet during operation and also saves much space for a larger oil tank.

The series are ideal for theatres, show rooms, ballrooms and clubs use, operating with our line controllers (LC-1, LC-2S),

remote controllers (RC-1, RC-2), timing controllers (TC-1, TC-2), or DMX controller (DMX-2) for powerful fogging effect. Our

high quality water-based fog liquid is optimized for use with ATMOS fog machines.

AF-800• 700Wheater

• 5minuteheatuptime

• Approx.3500cu.Ft/minoutput

• 0.9literfluidcontainer

• Directthermalprotection

• Operatebylinecontroller(LC-2),remotecontroller(RC-2),

timing controller (TC-2)







timing controller(TC-1), or DMX controller(DMX-2)


• Equippedwith

low-fluid sensors, which will automatically stop

pumping once fluid level is too low.








• Equippedwith

low-fluid sensors, which will automatically stop pumping

once fluid level is too low.



• 5literfluidcontainer




Atmos series specifications

ITEM NO. AF-800/800S AF-900/900S AF-1200/1200S AF-1700/1700S

Color Black or Silver Black or Silver Black or Silver Black or Silver

Power 700W 700W 1200W 1600W

Fuse (120V) T10A/250V T10A/250V T12A/250V NFB 20A

Fuse (230V, 240V) T5A/250V T5A/250V T7A/250V NFB 10A

Warm Up Time (min) 5 5 8 8

Output (cu. ft/min) 3500 3500 7000 21000

Tank (liters) 0.9L 0.9L 2.5L 5L

Voltage 120V/60Hz,230V/50Hz 120V/60Hz,230V/50Hz 120V/60Hz,230V/50Hz 120V/60Hz,230V/50Hz

Dimensions(LxWxH, W/O Bracket)

235x149x136 mm 235x149x136 mm 310x220x161 mm 435x280x395 mm(W/Handle)

Weight (kg) 3.3 3.3 5.4 7

Matching Controller(Optional) LC-2S,RC-2,TC-2 LC-1,RC-1,TC-1,DMX-2 LC-1,RC-1,TC-1,DMX-2 LC-1,RC-1,TC-1,DMX-2


Fog

Mach

ine

FOG MYTH SERIESFOG MYTH, a master of atmosphere inspiration, presents a new range of fog machines: FM-800, FM-1200, and FM-1800.

Boasting a unique heating system that reduce dramatically the heating time, Fog Myth series can produce fog powerfully and

steadily without making any noise.

Produced under stringent quality control system, Fog Myth series aim to provide maximum operation safety for users. The

professional “heavy-duty” fog machines of FM-1200 & FM-1800 are equipped with low-fluid sensors, which will automatically

stop pumping once fluid level is too low.

FOG MYTH series are well matched with our line controllers (LC-1, LC-2S), remote controllers (RC-1, RC-2), timing controllers

(TC-1, TC-2), and DMX controller (DMX-2) and are perfect for nightclubs, exhibition halls, and ballrooms etc. Use our high

quality water-based fog liquid to optimize the performance of Fog Myth series.

FM-800• 700Wheater





• Operatebylinecontroller

(LC-2S), remote controller (RC-2),

timing controller (TC-2)


• Equippedwithlow-fluidsensors,which

will automatically stop pumping once

fluid level is too low.






(LC-1), remote controller

(RC-1), timing controller(TC-1), or

DMX controller(DMX-2)


• Equippedwithlow-fluidsensors,which

will automatically stop pumping once

fluid level is too low.



• 5literfluidcontainer



(LC-1), remote controller

(RC-1), timing controller(TC-1), or

DMX controller(DMX-2)

Fog myth series specifications

ITEM NO. FM-800 FM-1200 FM-1800

Color Black or Silver Black or Silver TT

Power 700W 1200W 1700W

Fuse (120V) T10A/250V T12A/250V NFB 20A

Fuse (230V, 240V) T5A/250V T7A/250V NFB 10A

Warm Up Time (min) 5 8 8

Output (cu. ft/min) 3500 7000 21000

Tank (liters) 0.9L 2.5L 5L

Voltage 120V/60Hz,230V/50Hz 120V/60Hz,230V/50Hz 120V/60Hz,230V/50Hz

Dimensions(LxWxH, W/O Bracket) 235x149x136 mm 310x220x161 mm 435x280x295 mm(W/Handle)

Weight (kg) 3.25 6.10 11.6

Matching Controller(Optional) LC-2S,RC-2,TC-2 LC-1,RC-1,TC-1,DMX-2 LC-1,RC-1,TC-1,DMX-2


Hazer

DMX Super Hazer 400, Haze Effect of High Light-PenerationSelect Super Hazer 400 to make fog effect of high light-penetration.

Super Hazer 400 is able to generate harmless, dry and clean haze of high

light-penetration, which is excellent for matching different kinds of lighting

shows including traditional lightings, LED lightings and lasers, etc.

Super Hazer 400 has equipped inside a professional air compressor, which

is maintenance-free, a precise system of haze transmission, and a liquid

tank of large volume. Super Hazer 400 is designed with two independent

nozzles, which can generate respectively volumes of haze. The haze

generated by a procedure without heating up contributes much better

effect of penetration. The specific gravity of the particle of the haze is

similar to the air, so it can stay in the air longer. This character makes

Super Hazer 400 be an excellent implement for lighting shows. The super

powered compressor of Super Hazer 400 is quiet and highly effective.

It is suitable to be used in any kinds of professional occasions.

Super Hazer 400 is for DMX signal control, permitting use of any DMX

controller. SHZ-1C easy controller is specially designed for Super Hazer 400.

Super Hazer-400 is a perfect master piece characterized by the function

of generating volumes of haze of high light-penetration and high quality

as well as the high stability, low power consumption, high safety and

quietness. It is no doubt at all that Super Hazer 400 is professional at the

top level.

Super Hazer 400 (SHZ-400)

Product specificationPower 420W

Heater power 400W

Fuse (120V) 6A

Fuse (230V, 240V) 3A

Warm up time (min) NO

Fog output (cu.ft/min) 2800

Tank (liters) 2.5

Hanging Bracket YES

Dimensions (LxWxH, W/Handle)

500x341x285 mm

Weight (kg) 16

Voltage 120V,230V, 240V 50/60Hz

DMX Control DMX 1CH

Mach Controller SHZ-1C


Super Hazer 400 is designed with two independent nozzles, which can generate respectively volumes of haze.

Super Hazer 400 is for DMX signal control, permitting use of any DMX controller. SHZ-1C easy controller is specially designed for Super Hazer 400.

The haze generated by a procedure without heating up contributes much better effect of penetration. The specific gravity of the particle of the haze is similar to the air, so it can stay in the air longer.

Hazer

Product specificationPower 700W

Heater power 650W

Fuse (120V) 10A

Fuse (230V, 240V) 5A

Warm up time (min) 5


Tank (liters) 2

Hanging Bracket YES

Dimensions (LxWxH, W/Handle)

493x220x200 mm

Weight (kg) 7.10

Voltage 120V,230V, 240V 50/60Hz

Mach Controller TC-4, DMX-2X


Super Hazer 80, Haze Maker of High Efficiency–SHZ-80T/80DSuper Hazer 80 is high efficiency of heating. It is compact for easy

movement. It can make volumes of harmless and dry haze that is

perfectly suitable for matching with any kind of traditional lightings,

LED lightings and Lasers in any performance.

Super Hazer 80 is equipped with die-cut heating module, quiet fan

and big liquid tank. The heating module of high efficiency allows Super

Hazer 80 to make volumes of haze in a short time and to disperse

the haze evenly in the whole space. When detected low liquid by

the patented sensor device, power cutting functions automatically to

prevent interior spare parts from damage. The fan is quiet and effective.

The dry and long lasting haze effect makes Super Hazer 80 excellent for

matching with any kinds of lightings. TC-4 timer controller and DMX

signal convertible DMX-2X controller are further options to elevate the

utility of Super Hazer 80.

Super Hazer 80, perfect combination of high qualified haze in volumes,

high stability and safety, high efficiency and quietness, presents its

admirable value as the most wanted hazer.

Super Hazer 80 (SHZ-80T/80D)

When detected low liquid by the patented sensor device, power cutting functions automatically to prevent interior spare parts from damage.

Super Hazer 80 is equipped with die-cut heating module, quiet fan and big liquid tank.

The heating module of high efficiency allows Super Hazer 80 to make volumes of haze in a short time and to disperse the haze evenly in the whole space.

Effect Fog

Stunning Output in VerticalCyclone Fogger of vertical output is born as professional with DMX control.

Its powerful vertical output creates outstanding fog effect. One-piece

jointless die-cast heating pipe elevates heating efficiency and prevents

nozzle jam. Such specially designed heater sealed with iron guarantees

absolute safety to the users even in case all thermo sensor system is out of

work and results high temperature to melt aluminum as liquid, because

the liquid will be absolutely blocked. Powerful fogging with low power

consumption is no doubt an indispensable advantage in this era short of

energy. Patented function of sensing low liquid will automatically force

the pump to stop working, so that prevents parts damage. Strong outer

shell, handle of friendly use and Liquid tank of large volume accomplish

Cyclone Fogger perfect. Wire controller LC-1X, wireless controller RC-1X

and timer TC-1X are optional for operating Cyclone Foggers with excellent

conditions.

Cyclone Foggers can be easily installed in theater and studio. They are also

the most wanted for creating special and attractive effect in large scale

shows, concert, DJ touring and clubs.

Cyclone Fogger (CF-1500)

Product specification

Power 1600W

Heater power 1500W

Fuse (120V) 15A

Fuse (230V, 240V) 8A

Warm up time (min) 6.5


Tank (liters) 2

Hanging Bracket YES

Dimensions(LxWxH, W/Handle)

315x250x202 mm

Weight (kg) 7.2

Voltage 120V,230V, 240V 50/60Hz

DMX Control DMX 1CH

Mach Controller LC-1X, RC-1X, TC-1X


One-piece jointless die-cast heating pipe elevates heating efficiency and prevents nozzle jam.

Such specially designed heater sealed with iron guarantees absolute safety to the users even in case all thermo sensor system is out of work and results high temperature to melt aluminum as liquid, because the liquid will be absolutely blocked.

Bu

bb

le Master

The most wanted Bubble Master makes dancing parties full of fun.

Equipped with Double Bubble Wheel, Bubble Master constantly

produces volumes of firm bubbles. Its big mouth blows strongly

volumes of bubbles to the air, and also recycles the bubble liquid at

the same to avoid liquid leaking. The bottom base of the die-cut plastic

case is completely sealed, so that the liquid will not easy to spill when

the machine is being moving. Easy for bubble liquid supply plus the

handle for direct holding make Bubble Master absolutely user-friendly

in different kinds of locations, celebration parties, dancing parties and

shows.

Bubble Master can work with wire controller and wireless controller.

Without doubt, Bubble Master is the best helper for creating the best

activity atmosphere.

Bubble Master (BB-100)

Product specificationPower consumption 25W

Tank capacity 1

Fluid Consumption Rate 2 hr/liter

Weight 1.88 kg

Dimensions (LxWxH, W/Handle )

352x176x209 mm

Power Input 120V,230V, 240V 50/60Hz

Optional Remotes LC-3, RC-3

Mach Controller LC-3S


Equipped with Double Bubble Wheel, Bubble Master constantly produces volumes of firm bubbles.

The bottom base of the die-cut plastic case is completely sealed, so that the liquid will not easy to spill when the machine is being moving.

Party Fog

Mobile Party Fog Machine 400W & 800W Small Fog Machine

High Mobility, High Safety, Hiht InnovationThe miniature, lightweight 400W/800W fog machine are new models of thermal conductivity type fog machine specially

designed for commercial market. After passing various stringent environment simulation tests and safety specification

certification, this mobility foggers swept the fog machine market with a fresh new look. Its mechanized production and

strict processing control ensured conformity to quality control that is why 400W/800W fog machines have a very stable

quality. With respect to strong demand for security by the commercial market, the new design of this mobility fog machine

specifically targeted the triple safety protection. Even if there are damages in some parts of the machine, it can still give

the safest protection and provide customers with maximum safety. With puffing flow (output) of around 2000 (400W) and

3500 (800W) cu.ft/min, 400W/800W foggers are very suitable for use in small exhibitions, family parties, mini bars or small

commercial spaces.


Model DEO-400 DEO-400S DEO-800 DEO-800S GT-400 GT-800

Color Black Silver Black Silver Black & Silver Black & Silver

Power 400W 400W 800W 800W 400W 800W

Fuse (120V) 5A 5A 8A 8A 5A 8A

Fuse (230V) 3A 3A 5A 5A 3A 5A

Heating Time (minute) 4.5 4.5 5 5 4.5 5

Output (cu. ft/min) 2000 2000 3500 3500 2000 3500

Tank (liters) 0.6 0.6 0.6 0.6 0.6 0.6

Hanging bracket YES YES YES YES YES YES

Voltage120V,230V, 240V50/60Hz

120V,230V, 240V50/60Hz

120V,230V, 240V50/60Hz

120V,230V, 240V50/60Hz

120V,230V, 240V50/60Hz

120V,230V, 240V50/60Hz

Dimensions((LxWxH, W/Handle)

235 x148x174 mm 235 x148x174 mm 235 x148x174 mm 235 x148x174 mm 243 x148x177 mm 243 x148x177 mm

Weight (kg) 2.2 2.2 2.4 2.4 2.2 2.4

Matching Controller (Included)

LC-2X LC-2X LC-2X LC-2X LC-2X LC-2X

* NOTICE: Voltage is preset at factory and may not be changed.

Features:• Aspecialheatingelementdesignthatpreventsblockage,givingyearsofuse.

• Awide-anglefogoutput,whichuseofjointlessoiltransmissionpipelinesystemminimizesthepossibilityofblockage.

• Aneasy-to-usedesignmadeforconvenientoperationinvarioussettings.

• Mobility,compactandlightweightexterior.

• Itsfullyautomaticmechanicalproductionprovidedstablequality.

• Triplesafetyprotectiongaveconsumersmoresecurity.

• High-performancepumpforgreatfogoutput.

• Candirectlyusefogswitchontheback(optional)oruselinecontrollerLC-2X.

Fog

Mach

ine C

on

troller

Fog

Liqu

id


www.amita.com.tw

• We are continuously improving and upgrading our products so specifications aresubject to change without notice.

©2011 JyunYao Technology Co., Ltd. 05032011

Local Dealer:

amita fog machine

Documents

circuit module

broken heating module

pump module

heating efficiency

heating time

dualpiped heating module

heating cycle

operation of gt