ametek programmable power _ elgar _ terrasas _ specifications

2
Search Solar Array Simulator Elgar Programmable Power Products Products | Support | Contact | News Sales Worldwide Elgar TerraSAS : Specifications Specifications AC Power AC Input Voltage: 115V (for DCS) 208VAC three phase Std, 400VAC and 480VAC three phase are optional (Input current depends on power rating) DC Output Open circuit voltage, Voc: 0 1000VDC Short circuit current, Isc: 0 – 1000A Maximum output power at MPP: 1MW (Lower voltage ranges will provide proportionately higher currents) 16 channel output, consult factory for additional channels. Programmable Parameters Irradiance level: 0 to 2000 W/m² Temperature: 40 to 90°C Temperature Coefficient: 0 to 65,000 mV/°C Simulation Times: 0 to 65,000 seconds Isolation relay and polarity relay closure Accuracy Voltage Readback: 0.2% of rated max voltage Current Readback: 0.5% of max current Programming Interface Ethernet with RJ45 connector / LAN AC Input Connections Finger safe, pressure type connectors three phase AC four wire plus safety ground stud AC input circuit breaker DC Output Connections Finger safe, pressure type connectors positive and negative Safety The output isolation relay operates as a disconnect relay in the event of a malfunction or an open interlock contact New Expanded AC Product Line Featuring California Instruments Product Configurator DC Electronic Loads DC Modular Supply Discontinued Products Product Support Contact Sales Output Voltage and Current Ranges Power 1.2 kW RMS PP DC Leakage Current 80Voc Isc=15A 4 mV 60 mV Power 5 kW 10 kW 15 kW 600Voc Isc=8.0A Isc=17A Isc=25A 335mA 1000Voc Isc=5A Isc10A N/A 10 mV 600 mV <3.5 mA per chassis MMPT Scalable (MPPT) 1000W to 1.0MW Response to MPPT Up to 120Hz Current Slew Rate 3msec/A Control Loop Sampling Rate 1usec / 10kHz Static and Dynamic Programmable PV Array Parameters Irradiance Level 02,000W/m2

Upload: august-mishra

Post on 01-Oct-2015

221 views

Category:

Documents


7 download

DESCRIPTION

wwwwwww

TRANSCRIPT

  • 3/31/2015 AMETEKProgrammablePower:Elgar:TerraSAS:Specifications

    http://www.solararraysimulator.com/products/terrasas/terrasas_Specifications.htm 1/2

    Search

    SolarArraySimulatorElgarProgrammablePowerProducts

    Products|Support|Contact|News Sales Worldwide

    ElgarTerraSAS:SpecificationsSpecifications

    ACPower ACInputVoltage:115V(forDCS)208VACthreephaseStd,400VACand480VACthreephaseareoptional(Inputcurrentdependsonpowerrating)

    DCOutput Opencircuitvoltage,Voc:01000VDCShortcircuitcurrent,Isc:01000AMaximumoutputpoweratMPP:1MW(Lowervoltagerangeswillprovideproportionatelyhighercurrents)16channeloutput,consultfactoryforadditionalchannels.

    ProgrammableParameters Irradiancelevel:0to2000W/mTemperature:40to90CTemperatureCoefficient:0to65,000mV/CSimulationTimes:0to65,000secondsIsolationrelayandpolarityrelayclosure

    Accuracy VoltageReadback:0.2%ofratedmaxvoltageCurrentReadback:0.5%ofmaxcurrent

    ProgrammingInterface EthernetwithRJ45connector/LAN

    ACInputConnections Fingersafe,pressuretypeconnectorsthreephaseACfourwireplussafetygroundstudACinputcircuitbreaker

    DCOutputConnections Fingersafe,pressuretypeconnectorspositiveandnegative

    Safety Theoutputisolationrelayoperatesasadisconnectrelayintheeventofamalfunctionoranopeninterlockcontact

    NewExpandedACProductLineFeaturingCaliforniaInstruments

    ProductConfigurator

    DCElectronicLoads

    DCModularSupply

    DiscontinuedProducts

    ProductSupport

    ContactSales

    OutputVoltageandCurrentRanges

    Power 1.2kW RMS PP DCLeakageCurrent

    80Voc Isc=15A 4mV 60mV

    Power 5kW 10kW 15kW

    600Voc Isc=8.0A Isc=17A Isc=25A 335mA

    1000Voc Isc=5A Isc10A N/A 10mV 600mV

  • 3/31/2015 AMETEKProgrammablePower:Elgar:TerraSAS:Specifications

    http://www.solararraysimulator.com/products/terrasas/terrasas_Specifications.htm 2/2

    Temperature 100to+100*C

    VoltageLevel 0600/1,000V80VConsultfactoryforothervoltages

    Currentleveltoratedoutputcurrent 0RatedOutput(seeMPPChart)

    VoltageTemperatureCoefficient 0to2%/*C

    ArbitraryVICurve Upto4096datapoints

    ProgrammableSetpoints

    Voc 0Ratedoutputvoltage

    FillFactor 0.5to0.95

    Vmp 0Voc

    Imp 0Isc

    ISC 0Ratedoutputcurrent

    OverVoltageProtection(OVP) 0.1%to110%ofVocMax

    VICurveSetPointAccuracy

    Voltage